Providing Roofing Works to the First Floor in Urban Public Health Centre building at Vadavalli (VNR Nagar) in Ward no.36, West Zone

Brick work in cement mortor 1:5 mix (one cement,five sand) using II class table moulded bricks to a size of 9"x4 3/8"x2 3/4" including cost and conveyance of all materials and labour charges for mixing the mortor, constructing, curing to required period and wherever the masonry projection is necessary for elevation shall be done with out extra cost etc complete as per std spn.

Plastering with cement mortor 1:5 mix (1 part cement and 5 part sand) using 12mm thick

Supplying and Fixing in position of STEEL DOOR & WINDOW using 20mm square rods at 15cm C/C and two baulstrades in one stepm centrally located and top welded to 25x 5mm flats fixing in the MS Pipe handrill and bottom fixed in step concrete firmly MS Flats of size 50mm x 6mm to be provided at the center of the balustrades connecting all the square rods to the entrote length of the balustrades including one coat of primer etc., Complete

Supply and fixing of MS Pipe including cast and conveyance of the material and labour charges for cutting,bending,welding and fixing etc complete

Supply and laying of Galvalume sheet roofing of 0.45 mm thick cost including laying using steel screws with necessary washers and labour charges

Providing and Fixing of 60mm polyurethane foam as External Wall Thermal insulation panels or Sandwich insulated panels with external 0.50mm total coated thickness pre painted galvalume sheet with micro ribbed profile, whereas internal 0.50mm total coated thickness pre painted galvanized iron sheet with micro ribbed profile and the insulation material will be chlorofluoro carbon and hydro chlorofluoro carbon free, high performance rigid polyurethane foam (PUF) conforming to IS 12436 having density not less than 40±2Kg/M3, Thermal conductivity (K-Value) 0.024 W/m.K measured at 10 degree C mean temperature along with necessaryflashings such as L flashing, C flashing etc& accessories such as screws, fastners, sealants etc for fixing the panel etc., complete complying with standard specification.

Supply and Fixing of UPVC Rain water trapezoidal gutter of size 150mm including transportation and labour charges for fixing in position with all other required materials like iron flat clamp, screws, end cap with rainwater drownward opening and welding the clamp with exisiting MS Pipe and painting etc complete

Flooring finishing with first quality design vitrified glazed tiles of all colours of size 600mm X 600mm X 6mm laid in cement mortar 1:3 mix to 20mm thick and painting with white cement using 0.30 kg/1m2 including finishing the jointing and painting flush with tiles surface etc., complete

Providing Wall Skirting with cement mortor 1:3 mix (one part of cement and three part sand) of approved quality and colour including pointing with colour cement etc complete

Painting with plastic emulsion paint two coats along with base coat of approved quality (ISI Standard) paint as per the standard specification. (The paint to be used should be got approved by the Executive engineer before use on work)