SPECIAL REPAIR TO ROADS WITH ROAD FURNITURE FROM EKLAVYA TO C DIV PARKING AND FROM GATE NO 3 TOWARDS SHIVAJI AND RANJIT BLOCK AT DSSC WELLINGTON

Amount

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exceeding 400 sqm and depth exceeding 50mm and not exceeding 100mm deep etc complete all as specified and as directed.

Material and labour for preparing unsurfaced water bound macadam surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt and applying tack coat @ 10 Kg per 10 Sqm using Bituminous Cold Emulsion Slow Setting Grade-1 (SS-1) etc complete all as specified and as directed.

Material and labour for preparing existing black top/ newly laid bituminous macadam surfaces by brushing with wire brushes or using pressure blower and compressor for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt applying tack coat @ 5 Kg per 10 Sqm using Bituminous Cold Emulsion Slow setting Grade-1 (SS-1) etc complete all as specified and as directed.

Material and labour for Premix Bituminous Macadam with binder content of 4% by weight of total mix using paving bitumen of VG-30, laid rolled and compacted to required camber and gradient (Consolidated thickness 75 mm or less) with mechanical paver rolled and compacted to required camber and gradient with 8 to 12 tonne power roller complete all as specified and as directed.

Material and labour for Bituminous Premix Semi Dense Asphaltic concrete 40mm consolidated thickness using paving bitumen of Grade VG-30 with 5.5% binder content by weight of total mix using hot mix plant and mechanical paver rolled and compacted to required camber and gradient with 8 to 12 tonne power roller complete all as specified and as directed.

Material and labour for repair to potholes any depth, not exceeding 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, paths, etc cutting around edges to at least 25 mm in depth, making good by applying tack coat @ 5 Kg per 10 Sqm using paving bitumen of VG-30 and putting in premixed bituminous macadam using VG-30, well rammed and sealed with binder 9.8 kg per 10 Sqm, blinded with 0.09 Cum of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings) depth of hole exceeding 30mm complete all as specified and as directed.

Material and labour for Applying 2 mm thick road marking paint with reflective thermoplastic white road marking paint confirming to BS-3262 (1989), either continuous or broken lines over existing or new painting surfaces of cement or bituminous surface, laid down through road marking machine using thermo plastic material by incorporating the white glass powder for reflectivity in 100 mm width in white or golden yellow colour by using applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, including cleaning the road surface of all dirt, seals, oil grease and foreign material etc complete as direction of Engr-in-Charge and in accordance with applicable specification complete all as specified and as directed.

Supply and fix in repairs solar cat eye aluminium alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc complete all as specified and as directed.

Supply and fix in repairs Poly Carbonate Convex Mirror outdoor type 1200mm/ 1000mm dia mounted and fixed to 80mm bore medium grade MS pipe of 1000 mm for NGL grouted with 1:2:4 of PCC 300 x 300 x 450mm PCC blocks complete all as specified and as directed.

Supply and fix speed breaker, rubberised, heavy duty of block size 425mm x 500mm and in 3" height, combination of black and yellow colour with two ends fixed with nuts and blots with adhesive as per manufacturers instruction by drilling holes in roads complete including taking down old damaged speed breaker of any description all as specified and as directed.

Supply and fix in repairs CAT eyes solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PMMA strip lens reflector of model No DA 972 fixed with and including MS stud of suitable size & conforming to IS as per manufacturer's instructions complete all as specified and as directed.

VENKATESH (BID ID -3325654)

TECKXPERT ENTERPRISES (BID ID -3325670)

Kanns Project Management And Consultancy (BID ID -3326700)

C A RAJENDRAN CONSTRUCTIONS (BID ID -3327027)

M Govindarajan (BID ID -3328768)

UNIQUE INDIA CONSTRUCTIONS (BID ID -3327145)