PROVN OF TOILET AT BANIHAL SR OF WATER FILTRATION PLANT AT RAMBAN ADDN/ALTN OF EXISTING HARDSTANDING AND REPLACEMENT OF ACSR AT MAITRA GARRISON UNDER AGE I BHALRA

Amount

Surface Excavation not exceeding 30cm deep and averaging 15cm deep and getting out in soft and loose soil, complete all as specified and directed.

Excavation over areas not exc. 1.5m deep and getting out in any type of soil, complete all as specified and directed.

Excavation over areas exc. 1.5m deep and getting out in any type of soil, complete all as specified and directed.

Excavating in trenches, not exceeding 1.5metre wide and not exceeding 1.5metre depth for foundation, etc or for shafts n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in hard/ dense soil, complete all as specified and directed.

Material & Labour for broken stone hardcore of gauge not exceeding 63mm deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surfaces in broken stone/boulders, complete, all as specified and directed.

Material & Labour for PCC 1:4:8, type D-2 (using 40mm graded stone aggregates) as in bed concrete for foundation filling & mas concrete, complete all as specified and directed.

Material & Labour for PCC 1:2:4, type B-0 (using 12.50mm graded crushed stone aggregates) 25mm thick as in floors, complete all as specified and directed.

Use and waste of formwork to sides of concrete foundations, footings bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter for rough finished surface.

Use and waste of formwork to rough finished surface of concrete (flat surface) to sides of pillars, postes, struts, piers, columns, and stanchions for rough finished surface.

Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, lintels, cantilevers, shelves including supports, oeverhangs etc elso splays between floors and beams etc as specified and directed for rough finished surface.

Use and waste of formwork to rough finished surface of chullah hoods, chajjas, troughts and similar items including edges as specified and directed by Engineer-in-Charge for rough finished surface.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick in flat (Horizontal or sloping) complete all as specified and directed for rough finished surface.

Material & Labour for reinforced cement concrete (nominal mix) type A-1 1:1.5:3 (20mm graded stone aggregate) foundations, including rafts, footings, foundation beams, plinth beams, bases for columns etc and mass concrete, completed as specified and directed

Material & Labour for reinforced cement concrete (nominal mix) type A-1 1:1.5:3 (20mm graded stone aggregate) in columns, pillars, piers etc

Material & Labour for reinforced cement concrete (nominal mix) type A-1 1:1.5:3 (20mm graded stone aggregate) in beams, cantilevers, bressummers, lintels over 1.5m span

Material & Labour for reinforced cement concrete (nominal mix) type A-1 1:11/2:3 (20mm graded stone aggregate) in chajjah as specified and as directed.

Material & Labour for TMT bars 10mm dia & over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified & directed.

ditto but 5 mm dia & over upto & including 10mm dia in stirrups, spacers and binders complete all as specified & directed.

Material & Labour for Brick work with sub class ‘B’ bricks, straight or curved on plan n exc 6m mean radius built in in CM 1:4, complete all as specified and directed.

Material & Labour for Brick work with sub class ‘B’ bricks, in one brick thick honey comb walling, straight or curved on plan to any radius in half brick thick wall built in CM 1:4, complete all as specified and directed.

Supply & fixing steel work in roof trusses (framed), purlins, crane gantries, rails and fastening and heavy bracket framing (beam, tee, angle, channel or flat section) including distance pieces, cleats etc and other steel works including special shaped washer etc and other works complete using ERW or induciton butt welded tubes conforming to IS 1161-1979 grade Fe 410 -W (Gde E- 250)

Material & Labour for preparation of newly steel surfaces of any description, over 10cm in width or girth, not othrwise described and applying tow coats of synthetic enamel paint over a coat of red oxide zinc chrome complete all as specified and directed

Pre-painted galvalume aluminium zinc coating G.I based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering/ cladding to wall, fixed self tapping screws, complete all as specified and directed.

Supply & Fixing 0.5mmm Pre-painted galvalume aluminium zinc coating plain steel sheet of any colour having tensile strength of 550 MPA as in roof covering/ cladding to wall, fixed self tapping screws, complete all as specified and directed.

Material & Labour for Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC foam sheet meter cut to two corner and jointed with 2 Nos of 1500mm long bracket of 15 x 15 square tube, the two vertical door profile are to be reinforced with 19 x 19 mm square tube of 19 squre tube of 19 gauge EPDM rubber gascut weather seal to be provided throgh out the frame shall be fixed to wall using 65 x 100mm long ms screw through the frame by using PVC fasterner (inc hold fast) and minium of 04 Nos of screw to be provided for each member & 2 Nos of horzintal all as specified as per drwaing.

Factory made Solid PVC Door Shutter with wood free core 28 to 30 mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on the back face and moulded plain colour PVC 'C' chanel having PVC sheet for top rail, lock rail & bottom rail panneling, supply and fixing in the frame at site as per specification.

Supply & fixing butt hings medium weight of size 100mm all as specified and directed.

Supply & fixing 150mm cast type aluminium anodised handles all as specified and as directed.

Supply & fixing 200 mm long Aluminium anodised, barrel tower bolt of extruded section and fixed as specified and directed by Engineer-in-Charge.

Supply & fixing Aluminium anodised 300mm size sliding door bolt with hasp staple and fixing clips of sheet, cast or extruded sections

Supply & Fixing steel ventilators with centre hung shutter including hings, steel peg stay, completed all as directed

Material & Labour sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 sqm each pane, 3mm thick

Material & labour for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete wall surfaces & finishing the surfaces even and smooth without using extra cement.

Material & labour for rendering 15mm thick in CM 1:3 on fair face of brick work surfaces (Intenal faces of septic tank) finished even and smooth without using extra cement all as specified

Material & labour for 15mm thick plastering in cement & sand mortar 1:4 on fair faces of brick work or concrete surfaces, finished the surface even and smooth without using extra cement.

Material & Labour for applying two coat, of oil bound distemper new wall surfaces over a coat of chalk whiting/ primer and a coat of putty complete all as specified and directed

Materail & Labour for preparation of new plaster surface & apply two coats of cement based paint over a coat of alkali primer resistance

Materail & Labour for broken bricks hard core gauge n.exc 63mm deposited, spred and levelled in layers n.exc 15cm thick. Watered and rammed to a true surfaces.

Materail & Labour for providing 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base of flooring complete all as directed.

Material & Labour for Non-skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick screed bed for laying floor finish in CM 1:4

Material & Labour for coloured Glazed ceramic tiles 350x450x7mm thick, on vertical surfaces such as skirting, dado and risers to steps etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick plastering on wall surface to receive dado tiles in CM 1:4

Supply & fixing Vitreous China squating pan, 'Orissa pattern' size 580x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) with 'P' or 'S' trap.

Supply & fixing 10 litres capacity PVC valveless, syphonic action type flushing cistern, low level, white with inlet, ball valve, float and handle including brackets.

Supply & fixing ABS mild steel chromium plated health faucet suitable for 15mm dia pipe with 1.50 mtr long tupe & hook complete all as specified and directed.

Supply & fixing Vitreous China wash hand basin white flat back of size 550mmx400mm including bracket, (pedestal pattern) cutting for and pinning the ends of brackets or erecting stands exclusive of waste pipe but including brass chromium plated waste coupling with long screwed sand nad fly nuts complete all as specified (make-CERA)

Supply & fixing brass chromium plated D type tubular towel rail 20mm dia and 600mm long with brackets

Supply & fixing urinal, bowl type including providing and fixing plugs, bedding urinal against wall, securing urinal to plugs, pointing around urinal and making connections to flushing pipe and outgoing pipes complete all as specified and directed by Engineer-in-Charge

Supply & fixing of vitreous china urinal partition white of size 310 x 770mm complete all as specified and as directed

Supply & fixing grating square 150mm size of PTMT (minium weight 100 gms)

Suppy & fixing flush pipe of PVC 32 mm dia for low level cistern (urinal and wash hand basin) pipes

Suppy & fixing for PVC connections 15mm size with PTMT nuts of length 600mm.

Supply & fixing galvanised medium grade steel tubing 20mm bore with all fitings with walls complete all as specified

Supply & fixing galvanised medium grade steel tubing 15mm bore with all fitings with walls and inside wall and floor complete all as specified

Supply & fixing 15mm bore bib taps, fancy type chromium plated cast copper alloy with crutch or butterfly handlge, screwed for iron pipe or for brass ferrule (make : CERA)

Supply & fixing 15mm bore stop valves/ angle valve, CP fancy type screwed down, high pressure, with cruth or butterfly handle, screwed both ends for iron pipe or for union

Supply & fixing 15mm bore pillars taps, fancy type chromium plated cast copper alloy with capstan head screwed down, high pressure with or without lettered hot or cold long screwed shanks and fly nuts screwed for iron pipe and fixed (make: CERA)

Supply & fixing 20mm bore stop valves, cast copper alloy screwed down, high pressure, with cruth or butterfly handle, screwed both ends for iron pipe or for union

Supply & fixing PVC (SWR) P trap 110/110 mm bore all as specified. Make -Supreme/ Finolex

Rotational moulded polythene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I, capacity of water tank 1000 ltr.

Material & Labour for Salt-glazed stone ware drain pipe, Grade 'A' bore of pipe 150mm, laid in trenches and jointed as specified

Material & labour for Concrete bed to 150mm bore drain pipes including packing under, and haunching against the sides of pipes after they are laid in cement concret 1:3:6 type C-2 40mm graded aggregate and tested, complete all as specified & directed.

Material & Labour for precast cemnt concrete type B-1 (1:2:4) using 20mm graded aggregate as in landing, cover slab, manhole cover etc ste in CM 1:4 all as specified and as directed by Engineer-in-Charge

Material & Labour for 75mm PCC 1:3:6 type C2 using 40mm graded stone aggregate as in plinth protection foot path and hard standing complete all as spcified and as directed

Material & labour forming construction joint 30mm deep x 10mm wide with sealing compound grade A

Supply & Fixing PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joint fixed to wall or laid in trenches or in floors with steel clamps all as specified & directed.

Supply & Fixing PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints as in weep holes all as directed by Engineer-in-charge

Removing of excavated soil to a distance exc 250m but not exc 500m and deposited where directed n exc 1.5m above the starting point

Returning, filling including spreading, levelling, watering and well ramming in layers n exc 25 cm thick each layer

Material & Labour for walling of random rubble stone masonry uncoursed weel bounded, bedded and solidly hearted built in CM 1:6

Pre cast cement concrete 1:3:6 type C1 using 20mm graded aggregate and setting in CM 1:6 concrete in joints to match as in bond stone

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified of random rubble walling with maximum drpression on face from straight edge held against the dressed surface not exceeding 20mm lime or sand stone, complete all as specified and directed.

Material & Labour raised pointing to random rubble masonry uncourded or brought upto courses in CM 1:4

Material & Labour for PCC 1:2:4 type B1 (using 20mm graded aggregate) as in coping and similar works incl necessary from work all as specified.

Material & Labour for point wiring and incl 1.5 Sqmm (nominal area) PVC insulated multistandard copper coductor FRLS in and incl PVC casing and capping ISI marked 20/30mm size or as required at site including with its fittings and fixtures such as ties, bends, elbows and junction boxes etc with 1.5 Sqmm copper conductor cable green in colour as earth continuity conductor connected to main earthing and common earth terminal, one light point/ fan point controlled by one way switch all as specified and directed.

All as per the description of Serial Item No 75 here-in-before but for one 3 pin socket outlet 5 Amp on same board, complete all as specified and directed.

All as per the description of Serial Item No 75 here-in-before but for one 3 pin socket outlet 5 Amp on independent board, complete all as specified and directed.

All as per the description of Serial Item No 75 here-in-before but for one 3 pin socket outlet 15 Amp on independent board with cable of size 4.0 Sqmm with 2.5 Sqmm copper conductor in green colour for earth continuity conductor, all as specified and as directed.

Supply & fixing switch piano flush type 5/6 Amp single pole one way and all as specified and directed by Engineer-in-Charge.

Supply & fixing for socket out let 2 in 1, 3 pin 5/6 Amp flush type complete all as specified and directed.

Material & Labour for socket 5 pin, 5 and 15 Amp flush type universal and all as specified and directed by Engineer-in-Charge

Material & Labour switch piano 5 pin, 15 Amp flush type universal and all as specified and directed by Engineer-in-Charge

Supply & fixing LED light fitting 1x20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as and directed by Engineer-in-Charge.

Supply & fixing LED light fitting 1 x 10W Bulkhead luminaries including LED light driver holderconnecting connecting up with three core flexible copper conduct cable of suitable size all as specified and as directed.

Supply & fixing LED light fitting mirror type with high output diffuser 2 feet, 10 watt, 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply & fixing 15 Watt LED bulb, in white colour with maximum Lumen outpur (850 lm) and colour temp 3000 K, all as specified and directed. Make : Wipro, Havells, Syska, CG.

Supply & fixing lamp holder PVC/ Polycarbonate type with back plate suitable for batten fitting.

Supply & fixing exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades and fram and louvers as specified and directed.

Material & Labour for ceiling rose surface bakelite 65 x 50 mm three terminals complete including making necessary connections all as spefied and directed by Engineer-in-Charge.

Sheet metal enclosure (factory made) double door for distribution board (when MCB's are to be used) Single pole neutral 240 V, 8 ways with 200 Amp rated busbar connection with suitable size to thimbless and including taking down all as specified and directed by Engr-in-Charge.

Supply & fixing 5-32 amp MCB SP rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection tasting and commissioning all as specified and directed by Engineer-In-Charge.

Supply & fixing 40A to 63A MCB SPN amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection tasting and commissioning including taking downall as specified and directed by Engineer-In-Charge.

Material & Labour for Sub main wiring with four of size 2x4 Sqmm for phase and neutral 1100 volts grade single core PVC insulated unsheathed multistranded copper conductor, drawn through and including non-metalic PVC rigid conduit ISI marked with all conduit accessories concealed in of wall/roofs/floors etc with 1 x 2.5 sqmm single core PVC insulated insheathed with one copper conductor as earth wire complete all as specified and directed. Note :- (i) Two runs of 4 sqmm cable, one run of 2.5 sqmm cable and one run of conduit will be measured as one unit. (ii) The cost of PVC conduit to be concealed in wall is deemed to be including in the quoted rate. Make of PVC conduit : Plaza/Modi/Sudhakar and Copper conductor :- Havell's/Finolex/Plaza

Supply & fixing through pipe, 1100 Volts grade heavy duty cable PVC Insulated aluminium standard conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hanger not more than 1 mtr apart including 4 mm suspension wire one twin core 16 sqmm solid conductor all as specified and directed by Engineer-in-Charge.

Earthing complete with galvanized steel earth plate electrode size 600mm x 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25 M deep below the normal ground level) with top edge of plate not less than 1.5 mtrs below normal GL to connectedto GI earth wire 4 mm dia by means of bolts, nuts, check nuts and washer of galvanized iron or steel protected by GI pipe light grade 15mm bore all as shwon on electrical plate no 3 of SSR part connected to the main board/ distribution board including testing on completion all as specified and directed. Note The unit rate shall also included for earth work in hard/ dense soil, PCC (1:3:6) type CI chamber, RC 1:2:4 type B-1 cover 50mm thick reinforced with 8 mm dia CTD bars (@) 150mm c/c both ways, funnel with GI watering pipe 20mm dia light grade, GI protection pipe light grade 15mm dia and wire mesh complete in addition to items No 1 9 (a) to (e) of preamble (notes) under sub heading earthing, specified on Sl Page No 389 of SSR , Part-II.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed by Engineer-in-Charge

Taking down old cement plaster on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water, etc

Material & Labour preparing of old surfaces as on wall and applying one coat of oil emulsion distemper all as directed by GE/Engineer-in-Charge.

Preparation of old decorated plastered or unplastered surface of walls, conics etc by brooming down, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of cement base paint all as specified.

Preparation of old painted steel surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint,desigen and pattern as approved by engineer in charge complete all as specified.

Demolition of Concrete of any description and in any position not otherwise specifically provied for un reinforced cement concrete complete all as specified.

Forming contraction joints 100mm deep X 10mm wide , filled with sealing compound Grade A'

Taking down shutters exceeding 1 sqm but not exc 2 sqm each.

Supply & Fixing Steel door including projecting type hinges,steel handle complete with glazing bars,dovetailed or welded complete all as specified and directed

Supply & Fixing Steel windows, with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars,dovetailed or welded complete all as specified and directed

Supply & Fixing Steel windows, with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars,dovetailed or welded complete all as specified and directed

Joist, channel angle or tee sections, fixed independently, without connecting plates, etc (cut to ordinary lengths i.e. within 20mm of the length indicated) in Fe-410-W(Gde-E-250)Quality,complete all as specified and directed by Engr-in charge.

Dismantling CGI corrugated steel sheeting any gauge thickness including Nainital or similar pattern roof coverings, complete all as specified and as directed by Engineer-in-charge.

Material and labour for taking out Motor Set of capacity 10 H.P to 20 HP from position and transportation of same from site to workshop and back, dismantling of cable/ pipe connection and reinstallation of motor set after necessary repairing on the existing foundation and making electrical connections including necessary nuts, bolts, washers etc., required at site of work, complete all as specified & directed Note : All spares parts required shall be measured and paid for separately

(a) Ball Bearing of suitable size

(b) Rubber washer of suitable size

(c ) Packing sheet of suitable size

(d) Bush cover of suitable size

(e) Mechanical Seal of suitable size

(f) Circlips Clamp of suitable size

Material and labour for taking out Motor Set of capacity 5 H.P to 7.5 HP from position and transportation of same from site to workshop and back, dismantling of cable/ pipe connection and reinstallation of motor set after necessary repairing on the existing foundation and making electrical connections including necessary nuts, bolts, washers etc., required at site of work, complete all as specified & directed Note : All spares parts required shall be measured and paid for separately

(a) Ball Bearing of suitable size

(b) Rubber washer of suitable size

(c ) Packing sheet of suitable size

(d) Bush cover of suitable size

(e) Mechanical Seal of suitable size

(f) Circlips Clamp of suitable size

Material and labour for taking out Motor Set of capacity 1 H.P to 3 HP from position and transportation of same from site to workshop and back, dismantling of cable/ pipe connection and reinstallation of motor set after necessary repairing on the existing foundation and making electrical connections including necessary nuts, bolts, washers etc., required at site of work, complete all as specified & directed Note : All spares parts required shall be measured and paid for separately

(a) Ball Bearing of suitable size

(b) Rubber washer of suitable size

(c ) Packing sheet of suitable size

(d) Bush cover of suitable size

(e) Mechanical Seal of suitable size

(f) Fan blace of suitable size

(g) Circlips Clamp of suitable size

Material and labour for rewinding of damaged/burnt motor of capacity 1 H.P to 20 H.P any type by using enamelled copper wire of superior quality of existing grade and same Nos. of turns including varnishing ‘F’ class insulation and drying in heat chamber / oven including all other material / fittings and testing on completion, complete all as specified & directed.

Material and labour for taking out Centrifugal Pump of capacity 10 HP to 20 H.P and transportation of same from site to workshop and back, dismantling of cable/ pipe connection and reinstallation of pump set after repair on the existing foundation and making electrical connections complete all as specified and directed Note : All spares parts required shall be measured and paid for separately

(a) Pump overhauling GM bushes, shaft rematteling making key gland packing,incl all engineering work.

(b) Pump shaft stainless steel of same make and model duly grinded/polished

(c) Bearing of suitable size of pump

(d) Plugging leaks in casing by welding the same incl grinding for smooth surface

Material and labour for taking out Centrifugal Pump of capacity 1 HP to 7.5 H.P and transportation of same from site to workshop and back, dismantling of cable/ pipe connection and reinstallation of pump set after repair on the existing foundation and making electrical connections complete all as specified and directed. Note : All spares parts required shall be measured and paid for separately

(a) Pump overhauling GM bushes, shaft rematteling making key gland packing,incl all engineering work.

(b) Pump shaft stainless steel of same make and model duly grinded/polished

(c) Bearing of suitable size of pump

(d) Plugging leaks in casing by welding the same incl grinding for smooth surface

Supply and fixing in replacement of CI Non Return Sluice Valves ISI Marked flanged class 1.6 PN with by-pass arrangement and necessary bolts and nuts of suitable size with and including rubber gasket for flanged joints and testing including taking out old unserceable non return valves complete of following sizes :- Make : KIRLOSKAR / BIR / BIV / L&T / KARTAR / ZOLOTO

(a) 100mm bore

(b) 80mm bore

Supply and fixing in replacement of CI Sluice Valves ISI Marked flanged class 1.6 PN with necessary bolts and nuts of suitable size with and including rubber gasket for flanged joints and testing including taking out old unserviceable sluice valves complete of following sizes :- Make : KIRLOSKAR / BIR / BIV / L&T / KARTAR / ZOLOTO

(a) 150 mm bore

(a) 100mm bore

(b) 80mm bore

Supply and fixing in replacement of Gun metal globe, Ball or gate valve class-2 with iron wheel head screwed both ends for pipes of following sizes complete including taking down old unserviceable gate valves all as specified and directed :- Make : KIRLOSKAR / BIR / BIV / L&T / KARTAR / LEADER / ZOLOTO

(a) 80 mm bore

(b) 63 mm bore

(c) 50mm bore

(d) 40 mm bore

(e) 32 mm bore

(f) 25 mm bore

(g) 20 mm bore

Supply and fixing in replacement of Cast Iron Foot Valve 50mm bore, conforming to IS-4038, complete suitable for pipes complete including taking down old unserviceable foot valve all as specified and directed. Make : KIRLOSKAR / BIR / BIV / L&T / KARTAR / LEADER / ZOLOTO

Excavating in trenches, not exceeding 1.5metre wide and 1.5metre in depth for laying of pipe lines and getting out old pipes in soft/loose soil all as specified and directed.

Returning and filling in including spreading, levelling, watering and well ramming in layers n exc 25 cm in soft/ distintegrated rock all as specified and directed

Removal of excavated surplus spoil/ rocks at a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr from the starting point all as directed.

Taking out Mild Steel/Cast Iron/ Ductile Iron/ Galvaniser Iron water mains including all fittings with spigot and socket ends or flanged ends including lead/ tyton joints and buming out lead joints and recovering lead, cleaning the pipe and removing to store for reuse complete all as specified and as directed:- Note : Excavation and earth work shall be measured and paid separately.

(a) 100 mm bore CI/DI

(b) 80 mm bore

(c ) 50 mm bre

(d) 40 mm bore

(e) 25 mm bore

(f) 20 mm bore

Supply and fixing in replacement of Galvanised iron tubing (GI), medium grade, with all fittings such as sockets, bends, elbows, tees, short pieces, connectors, back nuts, diminshing pieces, caps, plugs and unions etc., laid in trenches / fixed to walls and ceilings or laid in floors, including takind down old steel tubing complete all as specified and as directed of the following description :- Make : JINDAL PIPES / TATA / BST / PRAKASH SURYA

(a) 100 mm bore

(b) 80 mm bore

(c ) 50 mm bre

(d) 40 mm bore

(e) 25 mm bore

(f) 20 mm bore

Supply only High Strength Calcium based granular disinfectant for water treatment, more stable than chlorine gas, and stronger than Bleaching Powder and Sodium Hypochlorite of following specifications :- (a) Chemical analysis & physical observations: Description : Whitish granules of granular size (Mesh passing through – 100 BSS) : 1.1 (± 0.1) %, Water / moisture : 5.00 (± 0.2) % Other insoluble Calcium salts: 1.1 (± 0.1) % Mercury and other Heavy Metal contaminants : BDL (The chlorination chemical must contain appropriate quantities of dispersants / corrosion inhibitors to prevent encrustation / scaling in distribution systems) (b) Stability : Projected shelf life of chlorination chemical must be one year with minimal loss of chlorine. Make : Purichlore / Mark Daxter / ALTOCH-Gp (Declivace Technologies Pvt Ltd) / Any E-in-C approved Make

Supply only Hypochlorous Acid (HOCL) for chlorination of drinking water disinfection solution having high residual effect, clear colour less and potent germicide non corrosive and non foaming stable up to 100° C for drinking water as and when required in HDPE jericanes of 35 Litres capacity having the following features : (a) Potent germicide (b) Slim control (c) High residual effect to avoid contamination (d) Less hazardous (e) Work at low dosage in post disinfection (f) No after taste (g) Most reliable in operation (h) Eco friendly and biodegradable Make : Penta Water Treatment / Seacolor/ Hygene Maddox People Care / Super-Chlor Total

Supply of Potassium aluminum sulfate, clear in colour of class 1 quality suitable for purification of raw water all as specified and directed.

Supply only Bleaching powder class 1 qualiity all as specified and directed.

Draining out water from RCC overhead water storage tank of capacity 90,000 Ltrs, taking out sludge and depositing the same outside the Cantt area at a place meant for the purpose, removing all scale, dirt, algae, vegetation if any and flushing after cleaning with water and bleaching powder, cleaning walls and floors by scratching with wire brushes all as specified and directed.

Draining out water from sedimentation tank of capacity 80000 Ltrs, taking out sludge and depositing the same outside the Cantt area at a place meant for the purpose, removing all scale, dirt, algae, vegetation if any and flushing after cleaning with water and bleaching powder, cleaning walls and floors by scratching with wire brushes all as specified and directed.

Draining out water from underground water storage tank of capacity 45000 Ltrs, taking out sludge and depositing the same outside the Cantt area at a place meant for the purpose, removing all scale, dirt, algae, vegetation if any and flushing after cleaning with water and bleaching powder, cleaning walls and floors by scratching with wire brushes all as specified and directed.

Draining out water from underground / semi underground water storage tank of capacity 30000 Ltrs, taking out sludge and depositing the same outside the Cantt area at a place meant for the purpose, removing all scale, dirt, algae, vegetation if any and flushing after cleaning with water and bleaching powder, cleaning walls and floors by scratching with wire brushes all as specified and directed.

Taking out old unserviceable filter media from existing gravity type filter, cleaning the filter thoroughly from inside, outside and channel all around, taking out sludge and throwing the same in low lying area including replacing filter media with new filter media all as specified and directed by Engineer-in-Charge. NOTE :-- Supply only new filter media shall be measured & paid for separately as under :- Supply only filter media of size as mentioned below :-

a) Course aggregate of size 63mm

b) Course aggregate of size 40mm

c) Course aggregate of size 20mm

d) Course aggregate of size 12.5mm

e) Course sand suitable for filter plant

Submersible flat cable PVC insulated and PVC sheathed LT 1100 volts grade with copper conductor of size 10 Sqmm 3 Core, complete all as specified and directed. Make : Havells / Finolex / Polycab / Plaza / Asian

Submersible flat cable PVC insulated and PVC sheathed LT 1100 volts grade with copper conductor of size 16 Sqmm 3 Core, complete all as specified and directed. Make : Havells / Finolex / Polycab / Plaza / Asian

Supply only PVC Flexible pipe of size 50mm as complete as specified and as directed by the Engineer-in-Charge.

Material & Labour testing & Commissioning of LT panel frame CPRI approved, indoor type,factory made fabircated out of 1.6mm thick CRCA sheet, double door front/rear opening and locking arrangement, floor mounted on plateform of suitable size, aluminium bus bar chember (enclosed) with two coat of synthetic enamel paint over a coat of red oxide primer mounted on PCC blocks, fixed with grouted bold,nuts and washer and making complete connection in all respects in replacement as diected by engr-in-charge comprising of foillowing parts:- INCOMER :- (a) MCCB 125 Amp, FP, Thermal Magnetic release, 35 KA - 01 No as incomer OUTGOING :- (a) MCCB 63 Amp, TP, Thermal Magnetic release, 25 KA, 415 Volts - 02 Nos (b) MCCB 40 Amp, TP, Thermal Magnetic release, 25 KA, 415 Volts - 01 Nos (c) MCB SPN 32 Amps - 01 Nos (d) Indicating lamps (Set of 03 Nos) - 01 Set.

Material & Labour testing & Commissioning of LT panel frame CPRI approved, indoor type,factory made fabircated out of 1.6mm thick CRCA sheet, double door front/rear opening and locking arrangement, floor mounted on plateform of suitable size, aluminium bus bar chember (enclosed) with two coat of synthetic enamel paint over a coat of red oxide primer mounted on PCC blocks, fixed with grouted bold,nuts and washer and making complete connection in all respects in replacement as diected by engr-in-charge comprising of foillowing parts:- INCOMER :- (a) MCCB 100 Amp, FP, Thermal Magnetic release, 35 KA - 01 No as incomer OUTGOING :- (a) MCCB 63 Amp, TP, Thermal Magnetic release, 25 KA, 415 Volts - 02 Nos (b) MCCB 40 Amp, TP, Thermal Magnetic release, 25 KA, 415 Volts - 01 Nos (c) MCB SPN 32 Amps - 01 Nos (d) Indicating lamps (Set of 03 Nos) - 01 Set.

Material & Labour for earthing galvanized steel earth plate electrode 600mm x 600mm x 6mm thick buried directly to ground (earth pit not less than 2.25 mtr depth below normal ground level) with top edge of earth not less than 1.5 mtr below normal ground level connected to and including galvanized steel strip 32 mm x 6 mm as earth lead upto equipment by means of steel bolts, nuts, check nuts and washers, test point mad of GI strip 40 x 8 mm, 10 cm long PCC 1:2:4 type B-1 in pit with precast RCC 1:2:4 type B-1 in cover reinforced with XPM not less than 4 Kg per Sqm with 40mm bore GI light grade protection pipe, 20mm bore GI medium grade watering pipe with funnel including charcoal, dust, salt, all as shown in electric plate No 3 of SSR Part-I (2009) specifications, complete with necessary earth work in any type of soil, removal to a distance not exceeding 50 mtr including testing on completion & dismantling of existing earthing, complete all as specified and directed.

Material & Labour in replacement for earthing complete with GI earth plate 60cm x 60cm x 6mm thick electrode and 4mm dia GI wire as earthing lead burried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level. connected t GI wire earth lead 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 and incl earth work, PCC pit and RCC cover, watering pipe 20 mm dia light grade, funnel, wire mesh, protection pipe 15mm dia light grade up to 7.5 mtr length of earth wire, charcoal dust and salt ect and connected to earthing test point all as specified or directed and testing

Supply and fix installation, testing and commissioning of Electrical Operated chemical dosing system :- (a) Calcium Hypochlorite 65% -75% Chlorine Content in a white or grayish white Granular solid Chemical. (Calcium based Granular disinfectant Chemical for potable Water treatment & Swimming Pool). 45 Kgs each drum of Factory sealed HDPE Container. Make: Aquatick or AguaG. (b) Chlorine Dosing System (Dual Tank Model No. Aqua 1005 & 1006); - High flow rate of 0-25 LPH & High Pressure of 0-10 kg /cm2 and strokes / Minutes of Max-135 Min-15 with frequency conversion Motor. Including accessories injection Check Valve, Foot Valve and Discharge tubing 3 Mtrs. Accessories must include the following :- A> Preparation tank Model No AQUA1005 of net capacity 170 ltrs, FRP dosing tank dia 650 x net Height 375 + conical 300mm Gross height with stand 1000mm consisting og water inlet line, outlet with Y strainer, Drain, Overflow, Conical bottom for sludge deposition, post hole with cover, level gauge, Agitator 120 watt 900 RPM Single phase flange mounted motor with plastic shaft and impeller.

B.> Service tank Model No. AQUA1006 of net capacity 100 ltrs. of FRP dosing tank Top dia 540 mm x Bottom dia 480mm x Height 575mm consisting of water inlet line, Dosing pup inlet arrangement, Drain, Overflow level gauge, inspection port, Agitator 120 watt 900RPM signal phase flange mounted motor with plastic shaft and impeller, Provision of mounting lid, Pump fitted with mounted on heavy duty MS fabricated frame and painted with anticorrosive paint. Brand: AQUAFIT Model No. ACDS. Make:- Aquajio Technologies. Aquajio Chlorine test kit with Colored sample complete with all testing fitment and OT solution in rexine finish box.Make :- Aquajio Technologies. Aquajio Chloroscope (Chlorine & PH Test kit) for estimation of resional chlorine in water comprises of Plastic box, two tube, Droper and colour filter for estimation . Make : Aquajio Technologies. Aquajio Water Quality TDS tester with ATC, Digital and Pocket type . Range : TDS: 0-999 PPM(Mg /L). Model No. : ATDSoo16. Make :- Aquajio Technologies.

Supply, Installation, Testing and Commissioning of Float & Board Level Indicator for under gound sum and over head tank of hight to be 4 to 5 Mtr:- TYPE : FLOAT & BOARD FLUID : LIQUID TEMPERATURE : 150O C PRESSURE : VACCUME TO 10 Kg/Cm2 SPECIFIC GRAVITY / DENSITY : 0.7-2.0 VISCOSITY (OP / MAX) : 1-20 Cp VISCOSITY (OP / MAX) : 1-20 Cp MOC OF THE TANK : MS./SS/HDPE/FRP CONNECTION FLANGE : MS SLIP ON TYPE FLANGE SIZE : 1” ASA 150 # RF SCALE : ALUMINIUM POWDER COATING HAVING SCREEN PRINTED AND 150 MM WIDTH AND 1 MTR LONG WITH WHITE BACKGROUND AND BLACK MARKING WITH PVC LAMINATED ZERO PLATE : ALUMINIUM POWDER COATED LEAST COUNT : 10 MM INDICATION IN : CM FLOAT : SS304 HAVING 12” DIA FLOAT WIRE : SS304 HAVING 2.5 MM DIA MULTITHRED PULLEY & PIN : SS304 PULLEY HOUSING : ALUMINIUM DIE CAST DUST PROOF “T”BRACKET FOR SCALE JOINT : MS “T” TYPE AT EVERY METER POWDER COATED TOP BRACKET : M.S. “ L” TYPE POWDER COATED CHECKNUT AND CHECKNUT PIPE: MS ENTER CONNECTING PIPE : MS TELESCOPIC PIPE HAVING ADJUSTABLE UP TO 700 MM LONG AIRROW (INDICATOR) : M.S. POWDER COATED WITH PP ROLLER WITH RED REDIUM MARKING ANCHOR PLATE : NA ANCHOR HOUSING : NA ANCHOR SPRING : NA FASTENER : GI PLATED Make : NRG GLOBAL

Supply & pouring Compressor Oil in air blower at water filteration plant complete all as specified and as directed.

Labour for dismantling, disconnecting the Air Blower twin lobe positive displacement type of pressure upto 0.8Kg/cm2 and capacity upto 90Cum/hr including disconnecting from channel frame and electrical panel for repair of Gear Box, refitting of gear box after oiling, greasing, alingment of pump set including transportation to workshop & back for repair and re-fixing/ assembling testing to make it functional complete inciuding cleaning of all dirt, dust etc. all as specified and directed by Engr-in-charge. NOTE : Spare parts required for repairing will be measured and paid under relevant item as supply only.

Supply only following spare parts in the twin lobe positive displacement type and pressure rating upto 0.8Kg/cm2 of Make-Usha

(a) Replacement of Pully V Belt SPB-1800

(b) Ball Bearing 62033 Make-SKF/ZKL

(c) Piston ring

(d) Set of Gasket

(e) Oil seal

(f) Oil level glass

(g) Suction air filter

(h) Air compressor shaft welding , turning , grinding

(j) Gear wheel Pair

(k) Air breather

(l) Grob type suction filter

(m) Injection ring

Supply & Fixing man hole cover of UG/semi UG sump tank of any size made out of 3mm thick MS sheet and angle iron 40x40x6 mm duly welded and having handle on top to open and close the cover welding two butt higes including painting with two coat of Black synthetic enammel paint over a coat of red oxide primer all as specified and as directed.

Materials and labour for construction of brick masonry valve pit of internal dimension 90 x 90 x 90 cm depth with sub class new 'B' bricks in CM (1:4) and 100 mm thick plastering in CM (1:4), PCC (1:4:8) type D2 (Using 100 mm graded broken stone aggregate) as in foundation lean concrete, PCC (1:3:6) type CI (using 20 mm graded broken stone aggregate) as in bedding and copping MS frame with 50 x 50 x 6 mm angle iron 4 mm thick MS sheet cover plate with locking arrangements, hinges and two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surface, three coats of white wash on plastered surface (exposed to view) including necessary excavation in soft loose, soil, returning filling in and removal of surplus soil to a distance not exceeding 150 mm dia gate valve complete all as specified and and directed.

Repair/servicing of water loos of head in meters, at site with the replacement of following unserviceable spares installed at water supply installation. Note All spares parts required shall be measured and paid for separately as supply only under following itemsof Sch 'A'

Repair/servicing of water Rate of Flow in G.P.H, at site with the replacement ofunserviceable spares installed at water supply installation installation. Note All spares parts required shall be measured and paid for separately as supply only under following itemsof Sch 'A'

Taking down carefully copper/ aluminium point wiring (light, fan, socket or power point) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, socket, lightfitting etc, removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per condition separately) and making good distribution surfaces of walls, floors, etc compplete all as specified and directed by Engineer-in-Charge.

Taking down old and unserviceable sub main wiring any size/type/core included earth wire complete with RM batten/conduit etc and making good the disturbed surface to match the existing disturbed surface all as specified and directed by Engr-in-Charge

Taking down old and unserviceable distribution board any type/ way/ capacity including all type of controls complete after removing all connection and making good the disturbed surface all as specified and directed by Engr-in-Charge

Material & Labour for point wiring complete with PVC insulated unsheathed cable 1100V grade 1.5 mm (nominal area) multistranded with copper conductor drwan through in non metallic rigid PVC conduit medium grade, minium 20 mm dia, ISI Mark, and connected accessories mounting on surface of walls/ floors/ceillings/ roofs etc with shunken type pressed welded mild steel boxes 3mm thick laminated sheet cove for mounting of switches, sockets outlets, regulators etc including provision of PVC insulated unsheathed 1.5sqmm multistanded copper conductor as earth connectivity and connecting to common earth dolly and making good to the disturbed surface area of wall complete all as specified and directed. make of PVC conduit : Plaza/ Modi/ Sudhakar/ Avon Plast and PVC Cable: Havells/Finolex/Plaza. Note The cost of PVC conduit to be concealed in wall is deemed to be including in the quoted rate.

(a) One light point controlled by one switch

(b) One 5 amps switch socket combination on independent board

(c) One 5 amps socket outlet on same board controlled by another switch

(d) All as per item No 223.00 here-in-before but with 2.5 sqmm copper wire for power point.

Material & Labour switch piano flush type 5/6 Amp single pole one way including taking down alll as specified and directed by Engineer-in-Charge

Supply & Fixing socket outlet 2 in 1, 3 pin 5/6 Amp flush type complete including taking down, all as specified.

Supply & fixing for switch socket combination 2 in 1, 5 pin 5 Amp, flush type single pole, universal including taking down and all as specified and directed by Engr-in-Charge

Supply & fixing for switch socket combination 2 in 1, 5 pin 5/15 Amp, flush type single pole, universal including taking down and all as specified and directed by Engr-in-Charge

Material & Labour for ceiling rose surface bakelite 65 x 50mm three terminates complete including taking down and making necessary connections all as specified and directed by Engr-in-Charge

Supply & fixing 1 x 20 watt LED tube light fitting (1182x23x37) mm (for 20 w) basic all purpose surface and wall mounted LED batten with aluminum housing & integrated electronic dirver with all accessories including connecting electrically to to ceiling rose using PVC insulted and overall sheathed flexible copper conductor cable 3 core of size 0.50 sqmm complete all as per cat no UMILINE + BS20WLED840SPCSS of make : Havelles or equivalent model of make : wipro, Havelles, Syska, CG

Supply & fixing LED steet light fitting 60 Watt 230V AC outdoor type with high pressure die sast aluminium hosing heat resistance complete with driver, lamp, bracket with impact and corrosion resistant including thermal management in multipale optics complete with IP 65/66 protection complete, Havells or equivalent model of make / Wipro/Philips/Syska, CG)

Sheet metal enclosure (factory made) double door for distribution board (when MCB's are to be used) Single pole neutral 240 V, 4 ways with 200 Amp rated busbar connection with suitable size to thimbless and including taking down all as specified and directed by Engr-in-Charge.

Supply & fixing MCB SP, 40 Amps, 240 Volts, C curve.

Material & Labour for replacement of PVC insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, croos-sectional area 50 sq. mm 3.5 core taking down old unserviceable service connection complete all as specified and directed.

Material & Labour 100 mm thick PCC 1:4:8 type D-2 (using 40 mm graded aggregate) as in sub base flooring.

Material & Labour 50 mm thick PCC 1:2:4 type B-1 (using 20 mm graded aggregate) as in top flooring including finishing cement mortar surface even and smooth without using extra cement..

Material & Labour for forming 12 mm thick expansion joint filled with pre-formed bituminous filler and top 30mm primed and sealed with ceiling compound grade 'B' type all as specified and directed.

Forming contraction (dummy) joints 65mm deep X 10mm wide , filled with sealing compound and Grade A type all as specified and as directed by Engineer in Charge.

Dismantling cross-arms of M.S channel or angle sections etc. Complete and getting aside for re-use with in 50m complete all as directed.

Dismantling of ACSR or AAC conductors complete all as directed. (Note : To be issued as credit items and UG cable to be layed in lieu of ACSR due to obstruction by ACSR and steel pole in rader radiation).

Dismantling insulators any type, any size complete all as directed.

Dismantling stay assembly complete (demolition of concrete etc, and excavation measured separately) all as directed.

Dismantling security light fittings of 1 x 60 watt LED, including bracket complete all as directed.

Steel tubular swaged poles type 410 SP-31 (9.0 mtr long) conforming to IS : 2713 Part-I to III 1980, complete with 6 mm thick mild steel base plate, finial taper plug, MS bolts, nuts, screws including painting upto 1.5 metre above PCC coping in black and white strips 05 Nos of 30 cms each starting from the bottom of the pole and two coats epoxy based paint aluminium grade finish to the remaining external surface over one coat of primer complete including taking down old unserviceable prestressed concrete pole all as specified and as directed,

Supply, laying and testing cable XLPE insulted, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with standed aluminium conductor of size 35 sqmm 2 core.

Supply and fixing ACSR conductor for HT/ LT OH line aluminium conductor steel reinforced size as per existing complete all as specified and as directed at site.

Supply & fixing cross arms, bracings, supports, clamps, back plate fabricated from structural steel sections such as channels, angles, flat iron including bolts, nuts, washers, welding, bending, cold or hot drilling holes for bolts/insulators in any shape and size as directed and inclusive of one priming coat of red oxide zinc chrome, one under coat and one finishing coat of aluminium paint complete all as directed by the Engineer-in-charge.

Supply & fixing LED steet light fitting 60 Watt 230V AC outdoor type with high pressure die sast aluminium hosing heat resistance complete with driver, lamp, bracket with impact and corrosion resistant including thermal management in multipale optics complete with IP 65/66 protection complete and as directed and specified by Engineer-in-Charge. Havelles Cat Part No ENDURAOMNIPLUSSL60WLEDSASYTOPC and equivalent Wipro/HPL/Syska

Supply & fixing in replacement Pin type porcelain vitreous white, brown or green insulator including one galvanised spindle two Gi washer and one GI nut 100 mm height, 65 mm dia for 1100 volts grade complete all as specified and directed by Engr-in-Charge

Material & Labour stay assembly complete with accessories as shown in electrical plate No.1 (loop type insulator, stay clamps, excavation and concrete measured separately) with 16mm stay rod complete all as specified and directed. Note. Earth work and PCC work will be measured and paid separately.

Supply & Labour street light bracket made out of 40mm bore GI tubing medium grade 1.2 mtrs long bend to shape by welding complete with 02 Nos clamps made of MS flat iron of size 40x5mm all as required at site or directed by Engineer-in-Charge.

Supply & fix with security lights 2.5 sqmm x 3 core unarmoured copper cable

Excavation in treches not exceeding 1.5 mtr wide and exceeding 1.5 mtr depth but exceeding 3.0 mtr depth for foundation, etc, and getting out in any type of soil, complete all as specified and directed.

Material & labour for cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) for foundation of pole/ stay including form work etc atll as specified and as directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers n exc 25 cm thick each layers complete all as specified and directed by Engineer-in-Charge, soil.

Removing excavated soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed by Engineer-in-Charge

M/S MAHALUXMI BUILDERS (BID ID -3159137)

LUXMI ELECTRONIC WORKS (BID ID -3168765)