AGE I CGN 25 2021 22 WELCOME MAINTENANCE OFFRS MD ACCN SECTOR 52 AND REPAIR TO B R NATURE WORKS LIKE FLOOR and WALL TILING JOINERY CEMENT PLASTERING ETC AT SECTOR 23 and 52 AT CG NOIDA

Amount

Demolition cement concrete (unreinforced) in ground floors and paving n exc 15 cm thick and removing the demolished material out of MOD land complete all as specified.

Dismantling floor hearth or wall tiling including cement mortar bedding, removing the rubbish off the premises of MOD land complete all as specified.

Demolition of brickwork built in cement mortar.

Taking down Chowkhats or frames exc 1.5 sqm but n.exc 4 sqm with shutters (Without taking off shutters from the frame)

Taking down Chowkhats or frames n exc 1.5 sqm each with shutters (Without taking off shutters from the frame)

Refixing of shutters of any description exc 1 sqm but n.exc 2 sqm in same opening including taking down easing, and adjusting complete.

Taking down shutters of any description exc 1 sqm but not exc 2 Sqm each

Taking down shutters of any description n. exc 1 sqm

Dismantling boarding, any description fixed in any position fixed with screws complete

Dismantling wall and ceiling or insulation boards incl brackets and cover fillets

Taking down cement plastering of brick or concrete wall surfaces in cement mortar complete

M&L for brick work with sub class ‘B’ old size straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.

M&L for 25mm thick plain cement concrete type B-1, 1:2:4 (20mm graded aggregate) in floors complete.

M&L for 10mm thick rendering for backing of tiles in CM 1:3 on fair faces of brick work or concrete surfaces.

M&L for 15mm thick Screed bed or beeding layer of mortar in CM 1:6 for laying floor finishes complete.

M&L for 20mm thick granite work (table rubbed and polished) in steps, jambs, pillars window cills and like in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust and jointed with Granite epoxy/silicone glue complete.

Rounding to edges of stone slabe one edge, such as steps, cooking platform and other similar situations and rubbing and polishing complete

M&L for non skid joint free coloured ceramic/rectified tiles 7 to 8mm this area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and joint in neat cement slurry and point in coloured cement to match the shade of tile complete all as specified.

M&L for 300x 600mm x 10mm thick Glazed coloured ceramic digital tiles in pattern or concept set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles complete all as specified & directed.

M&L for digital vitrified unltracharged/double charge ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exc 0.36 sqm floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete.

S&F Pressed steel door frame of size 105 x 60mm for doors with one or more rebates incl necessary fixing lugs hinges, lock strike plate etc complee all as specified. The rates include for one shop coat of priming.

S&F Pressed steel door frame of size 125 x 60mm for doors with one or more rebates incl necessary fixing lugs hinges, lock strike plate etc complee all as specified. The rates include for one shop coat of priming.

M&L for cement concrete 1:3:6 type C-1 (20 mm graded stone aggregate) as in back filing to pressed steel frames etc, complete all specified and directed

S&F 40 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides incl approved II class Hardwood lipping around complete all as specified and directed.

S&F 30mm thick 2nd class glazed and skeleton shutters open rebated and prepared to receive glass, gauge etc(without sash bars) edges of framing plain, chamfered or rounded, fittted with cut and mitred beads for securing gauge,etc

S&F 25mm thick flush shutters, solid core construction, with particle board core and plywood face panels one face, commerical type on both sides complete.

S & F solid PVC door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.(Make:-RAJHSRI)

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20 mm width stuck inside with solvant cement for stiles and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert of top rail and bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and raials with suitabale PVC sheet beading, and jointed together with solvant cement, and S&F in the frame at side as per specification and drawing.

M&L PCC(1:3:6) type C1 as in bed blocks for hold fast including necesssary formwork complete.

S&F 300mm long stainless steel sliding door bolts with hasp and staple fixing clip and bolts of AISI 316 grade fixed to door with complete all as specified and directed (MAKE : KICH/ARCH/Q-RAIL/D-LINE, prayag)

S&F 200mm long stainless tower bolts fixed to door with complete all as specified and directed. (MAKE : KICH/ARCH/Q-RAIL/D-LINE, prayag)

S&F stainless steel mortice handles of AISI 316 Grade 150mm long specified and directed. (MAKE : KICH Cat No 1916S or ARCH/Q-RAIL/D-LINE, prayag)

S&F statinless steel 100mm long floor door stopper fixed to door complete MAKE : KICH/ARCH/Q-RAIL/D-LINE, prayag)

S&F 15mm wide PVC door seal strip fixed with screws to door complete

M&L for preparation of new untreated steel surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of Synthetic enamel paint over a coat of red oxide primer complete

M&L for preparation of new untreated wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer complete

S&F 150mm long aluminium anodised barrel tower bolt of extruded section and fixed to PVC door complete.

S&F 150mm long aluminium anodised handles, extruded aluminium alloy fabricated type and fixed to PVC door complete

S & F butt hinges extruded aluminium alloy with galavanised mild steel hing pin anodised and fixed type 100mm size C21

M&L for 18/19mm thk block boards, grade 2 quality, i n t e r i o r grade, decorative type with decorative face veneer on one face,, fixed with screws to timber and edge lipping complete all as specified and directed.

S & F 30mm wide Continuous (piano) hinges, mild steel, bright finish or elec- trogalvanised complete all as specified and directed.

S&F stainless steel handle 200mm complete all as specified and directed. Make kich/hettich

S & F 18/19 mm thick post forming both side prelaminated PVC moulded solid kitchen cabinet boxes with shelf, drawer and shutter full size fitted under the kitchen cooking platform and other platform incl fittings etc complete all as specified and directed including provision of fixing arrangement Make- Rajshree or equivalent.

S&F 6 mm thick one side prelaminated decorative PVC sheet and other side plain in cupboard & like items inclusive of solvent cement & fixing at site complete all as specified and directed.e. Make- Rajshree or equivalent.

S&F in repairs Modular auto concealed soft closed hinges 35mm 110 degree size complete all as specified and directed.

S&F in repairs stainless steel handle 200mm complete all as specified and directed.

S&F in repairs stainless steel handle 150mm complete all as specified and directed.

S&F in repairs PVC tape 18mm wide with adhesive complete all as specified and directed.

S&F in repairs for Telescopic drawer channel rollers for shelves of size 500mm long complete stainless steel of grade 304 complete all as specified and directed.

S&F for anodisied aluminium snap grid of size 605 x 605mm frame work for false ceiling all as specified.

S&F Hangers 6mm dia GI (upto 1200m length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasterners 12.5 mm dia 40mm long complete all as specified.

S&F 10mm thick multiwall (1 cell/2 wall) sandwich PVC sheet cut to shape and fixed in aluminium snap grid false ceiling complete.

Applying a coat of modified SBR latex waterproof coating on brick/concrete wall surface complete. Make (Dr fixit super latex or Fosroc nitobond SBR latex)

M&L for 15 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surface and finished even and smooth without using extra cement complete.

M&L for rendering 5 mm thick cement plaster in CM 1:3 on ceiling surfaces including finished even and smooth without using extra cement.

M & L for Preparing new plastered or unplastered surfaces of wall and applying two coats of distemper oil emulsion, white or tinted over & including one coat of 3mm th Birla Putty and primer complete all as specified and directed.

Complete removal of existing treatment , washing down and stopping of distempered and painted wall surfaces using electrical operated grinder and M&L applying two coats of distemper oil emulsion, white or tinted over & including one coat of 3mm th Birla Putty and primer complete all as specified and directed.

M & L for Preparing new plastered or unplastered ceiling surfaces and applying two coats of distemper oil emulsion, white or tinted over & including one coat of 3mm th Birla Putty and primer complete all as specified and directed.

Complete removal of existing treatment , washing down and stopping of distempered and painted ceiling surfaces using electrical operated grinder and M&L applying two coats of distemper oil emulsion, white or tinted over & including one coat of 3mm th Birla Putty and primer complete all as specified and directed.

M&L for preparation of old wooden surfaces of any description, not otherwise described over 10cm width or girth and applying one coats of Synthetic enamel paint complete

M&L for Preparation of old decorated plastered or unplastered surfaces incl brooming down with steel wire brushing removing silt, Efflorescence etc and applying one coat of white wash on wall.

M&L for Preparation of old decorated plastered or unplastered surfaces incl brooming down with steel wire brushing removing silt, Efflorescence etc and applying one coat of white wash on ceiling.

Taking up or down 20 mm bore any kind of tubing and connections

Taking up or down 25 or 32 mm bore any kind of tubing and connections

S&F CPVC pipe SDR-11, 20 mm bore with plain SDR-11 fittings complete to walls and ceilings or laid floors or concealed, complete all as specified and directed.

S&F CPVC pipe SDR-11, 25 mm bore with plain SDR-11 fittings complete to walls and ceilings or laid floors or concealed, complete all as specified and directed.

Cutting chases, pinning in, making good to facings in brick wallswhere required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills sunshades shelves lintels etc and cutting chases for concealed waer tubing or concealed conduit wiring etc and making good, cutting exceeding 20 cm girth complete

S & F PVC (SWR) floor trap/nahni plain with grating incl jointing with solvent cement of 75mm dia of outlet complete all as specified and directed

S & F PVC (SWR) pipes single socketed 110 mm dia in any length with rubber ring joints fixed to walls, complete all as specified and directed

S & F PVC (SWR) pipes single socketed 75 mm dia in any length with rubber ring joints fixed to walls, complete all as specified and directed

S&F for SFRC drain cover 75mm thick factory made Medium duty with perforated holes (6 Nos) of 50mm dia, (cover shall be secured with min 4mm mild steel flat frame alround sides of cover), with lifting hook(02 Nos) at the end and set in CM 1:6 and size of cover 1000mm X 600mm etc complete all as spd & as directed.

Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately)

Providing and fixing factory made uPVC sliding window, three track made of extruded profiles with wall thickness of 2.3m (±0.2mm). Window profile with hollow section with multi chamber frame (88mm x 52mm),sliding sash (42mm x 67mm), sliding mesh sash (42mm x 57mm), sliding interlock (one vertical length in each shutters) (45.5mm x 28mm) Glazing bead (24.5mm x 16mm) will be mitered cut and fusion welded at all corners, incl railing of holes for fixing of hardware and drainage of water etc., making arrangement for fixing of hardware, EPDM gasket, 1.2 ±0.2mm thick galvanised steel frame (30mm x 18mm) 02 nos, sliding sash (30mmx18mm), sliding mesh sash (26mm x 10mm), Profile to be insterted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware : (touch lock of zinc alloyed (white powder coated), steel roller system, aluminium wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories). Make : Fenesta

Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

M/s SHRI RADHEY BUILDERS

M/S R.S. Builders