Construction of Shed for storing aluminium ingots at AMPRI,bhopal

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish , lead up to 50m and lift up to 1.5m all kinds of soil

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30cm measured at a height of 1m above ground level and removal of rubbish outside the site and to unobjectionable place

Providing and laying in position cement concrete of specified grade excluding cost of centering and shuttering - All work up to plinth level : iv)1:2:4(1 Cement : 2 Coarse Sand :4 Graded stone aggregate of 20mm nominal size)

Providing and laying in position cement concrete of specified grade excluding cost of centering and shuttering -finishing and reinforcement All work up to plinth level : iv)1:2:4(1 Cement : 2 Coarse Sand :4 Graded stone aggregate of 20mm)

Providing & Laying Reinforced cement concrete work in walls (Any thickness) including attached pilasters, buttresses, plinth and string courses, fillets,columns, pillars,piers, abutments, posts and struts etc.plinth level UP TO FLOOR V LVL excluding cost of centering,shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

Centering and shuttering including strutting, propping etc. and removal of form work for PCC i)) Foundations,footings,bases of columns, etc. for mass concrete

Centering and shuttering including strutting, propping etc. and removal of form work for all heights : suspended floor roofs landing balconies and access platform

Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

12mm Cement plaster of mix1:4 (1 cement: 4 coarse sand)

Finishing walls with Acrylic Smooth exterior paint of required shade

New work Two or more coat applied @ 1.67 ltr/10 sqm over & including base coat of water proofing cement paint applied @ 2.20kg/10 sqm.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade Two or more coats on new work

Providing and applying plaster of Paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete

Demolishing brick work manually/mechanical means including stacking of serviceable material & disposal of unserviceable material outside site at unobjectionable place & as/direction of Engineer-in-charge.

Demolishing R.C.C. work by mechanical means and stockpiling atdesignated locations and disposal of dismantled materials up to alead of 1 kilometre, stacking serviceable and unserviceable materialseparately including cutting reinforcement bars.

Hiring of labour for unforseen items in shifting jali refixing it and other work as instructed by e in c

Brick work with in Cement mortar 1:4 (1 cement : 4 coarse sand) in superstructure ABOVE PLINTH AND UP TO FLOOR V LEVEL

Supply & filling mooram and kopra in ,trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, each deposited layer by ramming and watering.lead up to 50m and lift up to 1.5m

Providing and fixing welded steel wire fabric of suitable aperture and fixing to grill by clamping through suitalbe means including all fitting fixiture etc. complete

Steel work in built up tubular (round, square or rectangular hollow tubesetc.) trusses etc., including cutting, hoisting, fixing in position andapplying a priming coat of approved steel primer, including welding andbolted with special shaped washers etc. complete Hot finished welded type tubes

A S build and construction