Karnataka

Active

Works

Buildings

Construction of Garadi House at Horakeri Colony in Tadakod Village of Dharwad Taluk of Dharwad District

Rural Development and Panchayat Raj Department

RDPR Division Office Daharwad | Karnataka

Amount: ₹12.5 LCloses: 6 Jun 2026Due tomorrow

Tender Value

₹12.5 L

EMD Value

₹31,500

Closing Date

6 Jun 2026, 9:30 pmDue tomorrow

Tender Inviting Organisation

Name

Rural Development and Panchayat Raj Department

Work Description

Construction of Garadi House at Horakeri Colony in Tadakod Village of Dharwad Taluk of Dharwad District

Tender Information

Tender ID

298550

Reference Number

RDPR/2025-26/BD/WORK_INDENT24360/CALL-2

Tender Type

Open

Product Category

Buildings

Location

RDPR Division Office Daharwad

Source Website

Subscribe to view

Documents Required

9 documents required · 9 mandatory

Technical Bid

RequiredContractor should upload KPWD renewal registration copy.

RequiredTo qualify for award of this contract each tenderer in his name should have in the last five years period ie 2021-22 to 2025-26 Turnover Certificate obtained from Charted Accountant and achieved in at least two financial years a minimum Annual Financial Turnover in all classes of civil Engineering construction works only Rs.12,52,808.27 with usually not less than the estimated cost under this contract with UDIN Number.

RequiredIn last five years That is 2021-22 to 2025-26 Satisfactorily completed as A prime contractor for at least one similar nature of work done work 50 Percent of the cost of the work that is not less than the amount Rs.6.26 Lakhs Certificate issued from the rank of Executive Engineer and above for the same should be furnished by the contractor.

RequiredLiquid assets and or availability of credit facilities of not less than Rs.3.76 Lakhs i.e., 30 percent of amount put to tender. Credit lines, letter of credit, certificates from Nationalized banks for meeting the fund requirement etc. for particularly this work only. Unconditional in given format.

RequiredThe contractor should scan the GST Certificate

RequiredThe contractor should scan the PAN card& Contact Details

RequiredCalculation sheet of Bidder Capacity AxNX2.5-B

RequiredTenderer should upload address and contact number.

RequiredTo qualify for award of this contract each Tenderer in its name should have in the last five years Executed in any one year the following minimum 80 Percent quantities of work in last five years 1. RCC/PCC-29.94 Cum, 2. BBM-25.81 Cum, 3. Steel-2.49 Tonne.

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Contractor should upload KPWD renewal registration copy.

Conditional Tenders will not be accepted.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidders end.

As per Karnataka State Government order No.LD 300 LET 2006 Bangalore Dated 01/01/2007 and Government Letter No.PW 134 BMS 2007 Dated 27/7/2007 a sum amounting to 1 percent of the bill amount will be deducted towards Construction Labour Welfare fund.

The tenderer should quote his rates with all lead and lifts, loading and unloading including cost of labour, hire charges of machinaries and other incidental charges etc complete as per specification and directions of the Engineer incharge of the work.

The bidder shall bear all costs associated with the preparation and submission of each tender and the employer will in no case be responsible and liable for those costs. The department is not responsible for any delay in accessing e-procurement portal

Contractors should have to upload the scanned copy of all necessary qualification documents, and submit the original documents certificates after opening the tender for evalution and verification.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders The departments shall not be responsible for non accessibility of KPPP portal due to internet connectivity issues and technical glitches at bidders end.

All materials required for the work shall be procured by the tenderer himself and should be got tested by the quality control authorities at his own cost before use on work.

Within 20 days of receipt of Letter of Acceptance, the successful Tenderer shall deliver to the employer a Security Deposit in the form of NSC/DD/ FDR in favor of the Executive Engineer, P.R.E. Division,Dharwad, for an amount equivalent to 5 percent of the Contract price plus additional security for unbalanced tenders in accordance with the conditions of contract.

Successful Bidder shall pay Contract Management Module processing fees of 0.025 percent of the contact value (Min Rs.500/- and Max Rs.7500/-) when bills are raised using Contract Management Module.

Self declaration of machineries are not accepted.

Third party inspection is mandatory for all the works in this programme.

The Employer reserves the right to reject any or all tenders without assigning reason.

Tenderer must submit his present accurate postal address and phone / cell phone number.

For interpretations of clauses, conditions, spelling mistakes, etc., decision of Executive Engineer is final.

The Furnished E.M.D. will be released only after successful execution of the Tender Agreement by the successful Tenderer or bid validity days from the date of submission of Tender whichever is earlier.

The successful tenderer shall maintain the work during the defect liability period of 1 year from the date of completion of the work.

The Tenderer at his own responsibility and risk is encouraged to visit and examine the Site of Works and its surroundings and obtain all information that may be necessary for preparing the Tender and entering into a contract for construction of the Works. The cost of visiting the Site shall be at the Tenderers own expense.

All other conditions and requirements has to be fulfilled as per the KW Standard Bid Document.

It is to be noted that any false documentation found to be uploaded, action may attract punitive measures such as Blacklisting, Cancellation of Registration etc.

The GST will be paid separately to the Contractors as per the Guidelines of the Government.

The work shall be inspected by the Third Party and the bill shall be admitted only after the satisfactory quality reports from the Third Party.

All safety precautions, warnings, signs, deployment of security guards have to be ensured so that no untoward incident happens on account of negligence or any project activity.

All materials required for the work, shall be procured by the tenderer himself and should be got tested by the Department quality control authorities at his own cost before use for the work. If employer wishes to engage third party inspecting agency for the said work, apart from the quality control authorities, then the contractor should cooperate with the third party for test

In the case of death of the contractor after executing the agreement/ commencement of the work, his legal heir, if is an eligible registered contractor and is willing, can execute and complete the work at the accepted tender rates in the same terms and conditions of the contractor of the work

Corrigendum/Modifications/Corrections if any will be published in the KPPP website only.

The work should be executed as per the KTPP Act.

The work should be completed within the stipulated time period from the date of issue of work order including Rainy Season.

Assessed available tender capacity - (AxNx2.5 - B) Where A is Maximum value of civil engineering works executed in any one year during the last five years That is 2021-22 to 2025-26 year taking into account the completed as well as works in progress. N is Number of years prescribed for completion of the works for which Tenders are invited. B is Value, at price level, of existing commitments and on-going works to be completed during the next years.

Contractor should obey with the above conditions in addition to the KW-1.

To qualify for award of this contract each tenderer in his name should have in the last five years period ie 2021-22 to 2025-26 Turnover Certificate obtained from Charted Accountant and achieved in at least two financial years a minimum Annual Financial Turnover in all classes of civil Engineering construction works only Rs.12,52,808.27 with usually not less than the estimated cost under this contract with UDIN Number.

In last five years (i.e., 2021-22 to 2025-26) Satisfactorily completed as a prime contractor for at least one similar nature of work done 50% of the cost of the work i.e., not less than the amount Rs.6.26 lakhs, certificate issued from the rank of Executive Engineer and above for the same should be furnished by the contractor.

Liquid assets and /or availability of credit facilities of not less than Rs.3.76 Lakhs(30% of amount put to tender) (Credit lines/ letter of credit/ certificates from Nationalized banks for meeting the fund requirement etc.) for particularly this work only. (Unconditional) in given format

Department of Mines and Geosciences Dated: 25-03-2013 Contractor Should get the Mineral Dispatch permit letter and submit it at the time of bill payment. In case of Non-submission of Mineral Dispatch permit action will be taken to impose a penalty of 5 times the Royalty.

To qualify for award of this contract each Tenderer in its name should have in the last five years Executed in any one year the following minimum 80 Percent quantities of work in last five years 1) RCC/PCC-29.94 Cum, 2) BBM-25.81 Cum, 3) Steel-2.49 Tonne.

Security deposit at the rate of 5% of tender cost should be made in favour of Executive Engineer in the form of DD / FDR / NSC at the time of aggrement (NSC should be fledge in the name of Executive Engineer)

The Increase in GST shall not be paid in the extended period of contract for which the contractor alone is responsible for delay as determined by the authority while granting the extention of time.

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹31,500

Important Dates

Last Activity

27 May 2026

Published

27 May 2026

Download Ends

5 Jun 2026

BOQ Preview

•

Construction of Garadi House at Horakeri Colony in Tadakod Village of Dharwad Taluk of Dharwad District

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

•

Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

•

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...

•

Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mi...

•

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

Providing Brick work with common burnt clay modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement: 6 coarse sand) including cost of all materials, labour, sca...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite / trap / basalt crushed graded coarse aggregates and fine aggregates as per relevan...

•

Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, prov...

•

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...

•

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

•

Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete a...

•

Providing and fixing in position fully panelled Matti/Nandi wood shutters for doors with, stiles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per dr...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

•

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...

•

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat ...

•

Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an eve...

•

ELECTRIFICATION WORKS - Concealed Conduit System : Supplying heavy gauge PVC conduit pipe . mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc...

•

Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 75 x 75 x 65 mm

•

Supplying and fixing PVC/metal conduit Deep junction box. 19/20 mm deep Junction box\

•

Supplying and flush mounting teak wooden box without front plank, made of not less than 12 mm thick wood, after due groove cutting, finishing with necessary cement plastering complete. 12" x 12" x 3" ...

•

Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete. upto 50 mm conduit in brick wall.

•

Supplying PVC/GI flexible conduit pipe . mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using N...

•

Point wiring using Copper wire with switch : Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi stra...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Supplying 6A flush type socket and 6 A flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using...

•

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. ...

•

Supplying .way plastic gang box and fixing using necessary wooden/ rawl/phill plugs and screws. 1 Way Gang Box

•

Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phas...

•

Supplying & fixing retrofit type-PL- LED Lamp . W LED linear source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per W, life 25000 burning hours and Compliance to IS 10322 / IEC 60598, LM 79 & L...

•

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GIpipe 2.5m long buried in a pit. The pit should be...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

24360-G.doc

Others - Detail Estimate • 0.18 MB

24360-G Call-2.doc

Tender Document • 0.18 MB

Ready to Participate?

Download all tender documents and submit your bid

Construction of Garadi House at Horakeri Colony in Tadakod Village of Dharwad Taluk of Dharwad District

Market Intelligence

Tender Inviting Organisation

Work Description

Tender Information

Documents Required

Eligibility Criteria

Fee & Financial Details

Important Dates

BOQ Preview

Documents

NIT Documents

Ready to Participate?