REPAIR MAINT OF E/M WKS AT 14 EME BN, 738 WKSP, TUSAR VIHAR, T MORH OR MD ACCN UNDER AGE E/M OF GE (NORTH) UDHAMPUR.

Amount

Taking down carefully the existing copper / aluminium point wiring of any size and type by disconnecting from the either terminals complete with switches, sockets, ceiling rose, regulators, bell etc. by unscrewing and removing materials to store for keeping in safe custody for re-use or for taking credit and making good to disturbed surface of walls, floors etc. to match with existing surfaces, complete all as specified and direcetd.

Taking down carefully by unscrewing from boards / outlet boxes fittings and fixture such as LED fittiings and fixtures, bulk head light fitting and LED security light etc, complete all as specified and direcetd.

Taking down old serviceable / unserviceable MCB / MCB DB of any type and size etc. after disconnecting, complete all as specified and directed.

M&L for point wiring for one light point, controlled by one one way switch 5 Amp with 1.5 Sqmm single core multi standed copper conductor FRLSH insulated and unsheathed heavy duty cable in colour code including continuos earth wire with cable of size 1.5 Sqmm copper conductor flexible FRLS insulated drawn into and including concealed PVC rigid conduit of not less than 25mm dia and 1.5mm wall thickness ISI marked, terminated into annealed steel terminal boxes, flush to surface including 3mm thick hylam brand IS-2036 marked laminated sheet cover for mounting switches, sockets, fan regulators etc. complete all as specified and directed.

All as per serial item No. 4.00 here-in-above but for one fan point, controlled by one 5 Amps switch on the same board with other switchs or independent board.

All as per serial item No. 4.00 here-in-above but for one bell / buzzer point, controlled by one other switch or independent one bell switch.

All as per serial item No. 4.00 here-in-above but for 3 pin socket outlet 5 Amps on same board.

All as per serial item No. 4.00 here-in-above but for one 5 Amps socket outlet on independent board.

All as per serial item No. 4.00 here-in-above but wire size 2.5 Sqmm to controlled the 3 Pin 5/15 Amps socket outlet on independent board and providing earth continuity wire using PVC insulated, FRLSH 1100 volts grade unsheathed single core multistranded copper conductor cable of size 2.5 Sqmm.

All as per serial item No. 4.00 here-in-above but one light/ fan point, controlled by two way switch.

S&F switch piano, flush type, single pole, 5 Amps, one way, complete all as specified and direcetd.

S&F in replacement switch socket combination piano type, 3/5 Pin, 6/16 Amps, flush type, complete all as specified and direcetd.

S&F socket outlet, two in one, 3/5 Pin, piano type, 5 Amps, flush type, complete all as specified and direcetd.

S&F socket outlet, two in one, 3/5 Pin, piano type, 15/16 Amps, flush type, complete all as specified and direcetd.

S&F ceiling rose, 3 terminal, PVC / polycarbonet, isolated body, complete all as specified and direcetd.

S&F electric bell AC 230 volts grade, single pole, complete all as specified and direcetd.

S&F flush type bell push, 5/6 Amps, complete all as specified and direcetd.

S&F electronic fan regulator, stepped type, 240 Volt, flush type, suitable for 1200/1400mm sweep ceiling fan, complete all as specified and direcetd.

Taking down ceiing / exhast fan, ceiling cable end, dismantling blades and kept in safe custody for refixing on same location, complete all as specified and direcetd.

Hanging / fixing only ceiling fan and connecting up and including provision of cable from ceiling rose or connector to fan obtained from serial item No. 19.00 here-in-above, complete all as specified and direcetd.

S&F in replacement switch piano, flush type, single pole, two way, 5 Amps, complete all as specified and direcetd.

S&F in replacement socket outlet, two in one, 3/5 Pin, piano type, 5 Amp flush type, complete all as specified and direcetd.

Fixing only LED tube light fittings of 5 / 12 / 20 Watt, 2'x2' panel light and LED bulk head fitting of any wattage as obtained from serial item No. 22.00 here-in-above complete with all accessories and including required wire of suitable size, complete all as specified and direcetd.

S&F in replacement LED light fitting with high out put diffuser, 1 feet, 5 Watt, 220 V, AC, decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, with CRI >, 80 efficacy : 120 Lm/W , IP-20, complete all as specified and direcetd.

S&F in replacement LED light fitting mirror type with high out put diffuser, 2 feet, 10/12 Watt, 220 V, AC, decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, with CRI >, 80 efficacy : 120 Lm/W , IP-20, complete all as specified and direcetd.

S&F in replacement LED light fitting 1x22 Watt, 230 V, high quality LED batten with aluminum extrusion housing with PC diffuser IP-20, connecting up with flexible copper wire of suitable size from ceiling rose to LED fitting, with CRI >, 80 efficacy : 120 Lm/W , IP-20, complete all as specified and direcetd.

S&F in replacement LED light fitting 1x20 Watt, 4 feet with emergency inverter batten with 3 Hours backup (100Lm/W) 230 V, high quality LED batten with aluminum extrusion housing with PC diffuser IP-20, connecting up with flexible copper wire of suitable size from ceiling rose to LED fitting, with CRI >, 80 efficacy : 120 Lm/W , IP-20, complete all as specified and direcetd.

S&F in replacement LED lights fitting 1x10 Watt, 2 feet with emergency inverter batten with 3 Hours backup (100Lm/W) 230V, high quality LED batten with aluminum extrusion housing with PC diffuser IP-20, connecting up with flexible copper wire of suitable size from ceiling rose to LED fitting, with CRI >, 80 efficacy : 120 Lm/W , IP-20, complete all as specified and direcetd.

S&F in replacement LED flood light, 80 Watt with lens (125 Lm/W) high pressure dia cast aluminium with toughened glass potted driver with IP-66 complete with CRI >, 80 efficacy : 120 Lm/W , IP-20, complete all as specified and direcetd.

S&F in replacement LED bulk head (6500K) fitting of 10 Watt with CRI >, 80 efficacy : 120 Lm/W , IP-20, surface mounting type extruded aluminium body with diffuser, complete all as specified and directed.

S&F in replacement decorative wall light fixture, made up of polycarbonate, suitable for 9 Watt LED (B-22 base) complete with LED with CRI >, 80 efficacy : 120 Lm/W , IP-20, complete all as specified and directed.

M&L for submain wiring with two run single core 4.0 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 Volts grade including 25mm dia in PVC concealed conduit/ PVC casing & caping, medium grade, ISI marked with all accessories such as Tees, elbows, junction boxes etc. as required, fixed on wall alongwith one run of 4.0 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board, complete including taking down unserviceable submain of any type/size and testing on completion, complete all as specified and directed. Note :- Two run of 4.0 Sqmm and one run 4.0 Sqmm cable and one run of PVC conduit / PVC casing & caping shall be measured as one unit/RM.

M&L for submain wiring with two run single core 6.0 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 Volts grade including 25mm dia in PVC concealed conduit/ PVC casing & caping, medium grade, ISI marked with all accessories such as Tees, elbows, junction boxes etc. as required, fixed on wall alongwith one run of 6.0 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board, complete including taking down unserviceable submain of any type/size and testing on completion, complete all as specified and directed. Note :- Two run of 6.0 Sqmm and one run 6.0 Sqmm cable and one run of PVC conduit / PVC casing & caping shall be measured as one unit/RM.

M&L for submain wiring with two run single core 2.5 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 Volts grade including 25mm dia in PVC concealed conduit/ PVC casing & caping, medium grade, ISI marked with all accessories such as Tees, elbows, junction boxes etc. as required, fixed on wall alongwith one run of 2.5 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board, complete including taking down unserviceable submain of any type/size and testing on completion, complete all as specified and directed. Note :- Two run of 2.5 Sqmm and one run 2.5 Sqmm cable and one run of PVC conduit / PVC casing & caping shall be measured as one unit/RM.

Fixing only serviceable MCB DB of any type and capacity, obtained from serial item No. 3.00 as above, complete all as specified and directed.

S&F in replacement SPN sheet metal steel powder coated distribution board for MCBs fitted with bus bar neutral link earth bar and din rail suitable for use on 240 Volts, 50Hz, double door, DB system, 2 way, complete all as specified and directed.

All as per serial item No. 36.00 here-in-above but DB system, 8 way.

All as per serial item No. 36.00 here-in-above but DB system, 4 way.

All as per serial item No. 36.00 here-in-above but DB system, 12 way.

S&F in replacement VTPN MCCB double door distribution board, 4 Way, 415 Volts grade IP-43 Protection with provision for MCCB as incoming and three / single phase (TP/SP) outgoings, complete with insulated bus bar arrangements, fixed/ flush to wall complete including connections with and including necessary reducer lugs, complete all as specified and directed.

S&F in replacement MCB, TPN, 100 Amps, 415 Volts, 16 KA, complete all as specified and directed.

S&F in replacement thermal magnetic MCCB, 4 Pole, 100 Amps, 415 Volts, 16 KA including making necessary arrangements, complete all as specified and directed.

S&F in replacement thermal magnetic MCCB, 4 Pole, 160 Amps, 415 Volts, 16 KA including making necessary arrangements, complete all as specified and directed.

S&F in replacement, connection and testing 'B' series SPN MCB, capacity 40 to 63 Amps, 240 Volts, 50 Hz, 10 KA for lighting and other domesitc loads including necessary copper lugs, complete all as specified and directed.

S&F in replacement 'B' series MCB SP, capacity 6-32 Amps, complete all as specified and directed.

S&F in replacement 'B' series MCB SP, capacity 40-63 Amps, complete all as specified and directed.

Fixing only serviceable MCB SPN/ SP of any capacity, obtained from serial item No. 3.00 as above, complete all as specified and directed.

S&F in replacement LED street light 35 Watt, 230 Volts AC (120 Ln/W) with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP-66 protection, complete all as specified and directed.

S&F in replacement 12 Watt LED cone round milky diffuser with die cast body post top lantern, suitable for LED 100 Lm/W with IP-65 protection outdoor type with complete accessories including suitable size black iron pipe, connection wire upto 10 RM with conduite pipe of suitable size and junction box with MCB, SP, 6/10 Amps, complete all as specified and directed.

S&F in replacement decorative LED rope light, 45 meter length, lighting fixture featuring small light LED bulb link together and encased in a PVC jacket to create a string of light with IP-66, complete all as specified and directed.

S&F in replacement 100 Watt UFO LED highbay light (125 Ln/W), suspended type, PDC aluminium housing with PC lens cover and mounting eye bolt with IP-66 protection, complete all as specified and directed.

S&F in replacement decorative flag colour LED rope light, 45 meter length, lighting fixture featuring small light LED bulb link together and encased in a PVC jacket to create a string of light with IP-65, complete all as specified and directed.

S&F in replacement energy saving LED garden light fitting, decorative, bollard type of capacity 9/11 Watt with opal diffuser & aluminium reflector complete with all accessories and fixing arrangements on PCC block of size 45cm x 45cm alogwith suitable size of black GI pipe for mounting and fixing with nuts, bolts and including PVC insulated aluminium conductor, stranded type of size 4.0 Sqmm 2 Core with PVC conduit, complete all as specified and directed.

S&F in replacement surface/ recessed mounting LED luminaire, size 600mm x 600mm, capacity 35/36 Watt, 220 Volts AC, recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders and LED lamp, suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.

S&F in replacement surface/ recessed mounting Trim NXT 15 Watt LED down light, round/ square type, 220 Volts AC, cool light, suitable for ceiling with high efficiency PMMA and surge protection upto 3 KV, diffuser soft glare free light complete with drivers including connecting cable of suitable size, complete all as specified and directed.

S&F in replacement LED light fitting 1x16 Watts flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP-65 protection with die cast aluminum housing with heat resistant toughened glass and with LED tube light fixtures driver, holders, connector etc, complete all as specified and directed.

S&F in replacement MCB TPN, capacity 63 Amps, 415 Volts, 'C' curve of 10 KA, complete all as specified and directed.

S&F in replacement metal clad plug socket, single pole enclosure with two pin earth plug and socket including MCB SP 32 Amp 240 volts, complete all as specified and directed.

Supply only PVC insulated single core copper conductor of size 1.5 Sqmm, complete all as specified and directed.

Supply only PVC insulated single core copper conductor of size 2.5 Sqmm, complete all as specified and directed.

S&F in replacement electrical PVC round cover plate, complete all as specified and directed.

S&F in replacement 3mm thick plastic laminated ebonite sheet cover of size 200x150mm including cutting / finishing or making hole for mounting of switches, sockets, regulators etc, complete all as specified and directed.

All as per serial item No. 62.00 here-in-above but sheet cover of size 250x200mm.

M&L for disconnecting all electrical connection from MCB DB TPN / Wall mounted panel box for reconnecting the same with providing proper copper bottle lugs of suitable size and removing the burnt out internal wiring of DB/ Panel complete with providing PVC flexible conduit for hanging wire, complete all as specified and directed. Note :- Replacement burnt out MCB of any type and size shall be measured and paid separately under relavent item of this BOQ.

S&F in replacement on load changeover switch, 4 Pole, 415 Volts in sheet metal enclosure of capacity 100 Amps, complete all as specified and directed.

All as per serial item No. 65.00 here-in-above but of capacity 63 Amps.

Supply, laying/ fixing and testing XLPE insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 Sqmm 4 Core, as in trenches/ floor/ pole/ GI pipe complete including cutting/ chasing to any surface and making good to the disturbed surface to match with existing surfaces and including taking out/ down existing cable, complete all as specified and directed.

Excavation in trenches in any type of soil, not exc 1.5 mtr deep and not exc 1.5 mtr wide for laying of under ground cable, pipe, electric pole and getting out, complete all as specified and directed.

Returning, filling in including spreading, leveling and well ramming in layers not exc 25cm in thick, complete all as specified and directed.

Removing excavated material to a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point, complete all as specified and directed.

Supply and laying DWC pipe (double wall corruguated) HDPE, PE-100, PN-4, confirming to IS:14930 (Part-II) alongwith necessary snap fit coupler for inter connection and size suitable protection for LT cable, complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode of size 600mm x 600mm x 6mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to earth plate with GI wire of 4mm dia by means of nuts, bolts and washers, check nuts of galvanized iron or steel including 15mm dia GI pipe light grade upto 1.5 mtr below GL for protection pipe, excavation and earth work, charcoal dust, common salt, PCC 1:3:6 type C-1 chamber with cover and RCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregates), reinforced with 6mm dia round bars @ 75mm c/c both way with MS handle 12mm dia, PGI funnel and wire mesh all as shown in electrical plate No. 3 of SSR Part-I, connected to earthing test point terminal including testing on completion, complete all as specified and directed.

M/S GURU DEV BUILDERS (BID ID -3304478)

DEV RAJ MAGOTRA (BID ID -3304382)