SPL REPAIR TO BLDG NO LSF-6/1 AND LSF 2/4 AND LSM-75/03 OF 39 COY ASC TYPE A AND SPL REPAIR TO BLDG NO. COOK HOUSE (T-50) OF 39 COY ASC TYPE A AND PROVN OF OVERHEAD PROTECTION IN FRONT OF ALL STORES BLDGS OF 39 COY ASC (SUP) TYPE A AND PROVN OF RAIN

Amount

Dismantling of wall/ceiling boards (fibre, pulp,insulation, etc.) or insulation boards/ slab/blankets, any thickness including cover fillets complete all as specified and directed.

M&L for 4mm E boards 600x600 mm prepainted fibre boards ceiling designer/decorative type with different designs as approved by the Engr-in-charge fixed or laid in ceiling timber /GI/ aluminium frame work in ceiling flat or sloping complete all as per manufacturer instruction complete all as specified and directed.

S&F Anodised Aluminium frame work for snap grid false ceiling comprising of Gl perimeter channnel 0.55 mm thick with Aluminium main T- flange of 25 mm and web of 30 mm fixed to surrounding wall angle with flange and web 25 mm each , Cross T with flange 25 mm and web 25 mm fixed to main T, Main T is suspended from soffit @ 1200 mm c/c using Gi wire of 4mm thickness Aluminium frame will be 60 x 60 cm to recieve ceiling board complete all as specified and as directed .

Dismantling plain or corrugated steel sheeting, any guage, thickness incl nainital,AC Sheets or similar pattern as in roof coverings.

S&F pre-painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick as in roof covering including fixing with self driving machine made screws with washers and fitting of same manufacture of approved profile, shape and colour complete all as specified and directed

Dismantling boarding any description fixed in any position with nails complete all as specified and directed

S&F 20 mm thick 2nd class hard wood boarding in eaves board/fascia plained one side with butt joints fixed with nails complete all as specified.

Taking down chowkhat with shutter (without taking off shutter from the frame) and area n exc 1.5 sqm each complete all as specified and directed.

Taking down chowkhat with shutter (without taking off shutter from the frame) and area exc 1.5 sqm but n.exc 4 sqm each complete all as specified and directed.

S & F Factory made solid pannel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heatmoulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

M&L 2nd class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid ,rounded or chamfered ,put together with glue pinned at joints , supplied and fixed.

S&F 35mm thick 2nd class hard wood skelton shutters open rebated and prepare to receive glass, gauze, etc devided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(a) complete all as specified and directed.

S&F 30 mm thick Flush door shutters solid core construction with block board core and ply wood face pannels commercial veneered on both faces complete

S&F powder coated (min powder coating 50 micron) anodised aluminium frame for doors, windows , ventilators and partition plain or sliding type with one or more rebates including joining cleat for fixing etc complete all as specified and as directed

S&F powder coated(powder coating min 50 micron) anodised window and ventilator shutters side hung/sliding type without sash , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , anodised aluminium snap beading screws ,anodised aluminium fittings such as peg stays 150 mm long(1 no) hinges type B-21 100 mm long (2 no) suitable handle (1 no ) complete as specified

S&F pre-painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick as in roof covering of tensile strength 550 mpa including fixing with self driving machine made screws with washers and fitting of same manufacture of approved profile, shape and colour complete all as specified and directed.

S& for PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F 12 mm thick block boards grade 1 quality exterior grade , commercial type fixed with screws to timber frame complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frame including taking out old wooden beads complete all as specified and directed.

S&F Sheet glass, 5.50mm thick ordinary quality, in squares,exceeding 0.50 sqm in each pane including rubber packing and aluminium beading complete all as specified and directed

S&F in repairs CP single lever wall mixer 3-in-1 system with provision for bath hand shower & overhaed shower complete with 115 mm long bend pipe connecting legs & wall flange (without hand & over head shower) complete all as specified and directed.

S & F in repair Brass CP WHB mixer for mixing hot & cold water screwed down for iron pipe and fixed

M/L 3mm thick sheet glass ordinary quality and glazing with oil putty/wooden beading(fillets) in square n exc 0.5 sqm in each pane complete all as specified and directed.

S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for Non Skid joint free coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile colour including Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM (1:6). complete all as specified and directed.

All as per Item no 27 above but in vertical surfaces such as skirting / dado laid over and incl a backing coat of 10mm thick CM 1:4

M&L for Non Skid joint free coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile colour including Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM (1:6). complete all as specified and directed.

M&L for Glazed ceramic coloured tiles in vertical surface of size 450 x 300 x 7mm/300x600x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with the tile colour over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed.

S&F in Vitreous China Wash Hand Basins size 550 x 400 mm with pedestal including cutting or pinning in ends of brackets or erecting incl 32 mm dia waste pipe complete all as specified .

S&F in repair Vitreous China EWC with P or S Trape including seat cover closed pattern with flats bottom and cover and MS CP hinging device, PVC flush bend pipe incl PVC Flushing cistern 10 Ltr Capacity, Low Level Valve Less , Symphonic Action type , White , with inlet, Ball Valve, Float and handle includind 32 mm dia PVC Flush pipe , a pair of cast iron Brackets duly painted / Erecting Stand including Cutting and pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 including taking down unserviceable Flushing Cistern and connected Items af any description , complete as specified and as directed.

S&F for vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including PVC flushing cistern 10 liters low level, PVC pipe connection suitable to joint flushing cistern to water closet fixed on 'P' or 'S' trap, lime concrete bedding complete all as specified and directed by Engineer-in-Charge.

S & F in repair CP Brass Chromium plated shower roses 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs washers and wastes incl bedding in CM to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 915x460 mm bowl size 410mmx360mmx160 mm complete all as specified and directed.

S & F Stainless steel kitchen plate rack of size 31'' X 30 '' X 10'' made out of stainless steel sheet of 1.00 mm with all accessories including taking down old unservicable one etc complete all as specified and directed.

S & F in repair corner glass shelf with bracket complete all as specified and directed.

S & F in repair Brass CP sink mixer with swinging provm for mixing hot & cold water screwed down for iron pipe and fixed

S&F in repair Health faucet (ABS Body) mild steel chroumium plated suitable for 15mm dia pipe with 1.25metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S & F Brass tubular towel rail 20 mm dia , 60 cm long including brackets complete all as specified and directed.

S&F of Brackets decorative ( Latto ) for 20 mm dia curtain rails complete all as specified and directed.

S & F Grating doom 100 mm dia PTMT ( Minium weight 25 gms ) complete all as specified and directed.

S & F (20 mm Curtain rail ) Harrison rails , aluminium anodised alloy , with fixing brackets , stops , rollars etc 20 mm dia complete all as specified and as directed .

Material & Labour for applying Two or more coats (over 1 mm thick wall care putty ) of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over New surfaces. on New or previously untreated surface all as specified and directed .

M&L for preparation of old wall surface and applying two coats of oil bound distemper over 1mm of wall care putty and one coat of wall primer and complete all as specified and directed.

Taking up or down steel tubing and connections for 20 mm bore of pipes complete all as specified and directed.

Taking up or down steel tubing and connections for 15 mm bore complete all as specified and directed.

S & F G . I pipe 15 mm bore tubing medium graded galvanised with all fitting fixed to wall , ceiling and laid in floor complete all as specified .

S & F G . I pipe 20 mm bore tubing medium graded galvanised with all fitting fixed to wall , ceiling and laid in floor complete all as specified .

S&F Butt hinges of 100mm size, extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed complete all as specified and directed.

S&F Extruded Aluminium, anodised, handles of size 100mm complete all as specified and directed.

S&F aluminium anodised barrel bolts and fixed of 150 mm length complete all as specified and directed.

S&F 300mm long aliminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts ans sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed.

Demolition of concrete of any description in any postion not not otherwise specifically provided for complete all as specified and directed.

Demolition and breaking up drain pipes 150 mm dia (Salt glazed ware, AC or Reinforced concrete set in cm) complete all as specified and directed.

M&L for 18/20mm thk granite slab ( as in table top rubbed and polished) as in counter fixed in CM 1:4 , pointing in white cement 1:2 using granite dust with admixture of pigment to match complete including dismantling the existing slab all as directed.

Labour only for chamfer , splays or arris in facework of Granite not exc 15mm wide complete

S & F 18/19 mm thick Block board , grade 2 quality , interior grade commercial type , fixed with screw to timber frame work complete all as specified and as directed.

S&F 0.90 mm thick decorative laminates type 1 of surface finish color and pattern as approved fixed with approved adhesive as per manufactures instruction complete all as specified

S&F Continuous (Piano) hinges, mild steel , bright finish or electrogalvanised , width of flaps 30 mm (when open) complete all as specified and directed.

S&F Magnet catches for cupboard shutter, brass body and striking plate including letting in all as specified and as directed

S&F extruded fancy type Brass handles fabricated type of size 100 mm complete all as specified and directed.

S&F Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed of 200 mm length complete all as specified and directed.

S & F Rotational moulded polyethylene water storage tanks 500 Ltr (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

S&F in repairs PVC (SWR) Pipes single socketed in any length with rubber ring joints, 110 mm bore fixed to walls/floor complete all as specified and directed.

S & F PVC (SWR ) 75 mm bore vent cowel.

S & F PVC (SWR ) 75 mm bore bends any radius with access door complete all as specified and directed.

S&F PVC (SWR) bends, any radius, 110 mm bore complete all as specified and directed.

S & F PVC (SWR ) pipes 75 mm bore single socketed , in any length with ribber ring joints , laid in trenches or in floor complete all as specified and directed.

S&F in repair PVC (SWR) junction single, (Single T) provided with access door, any radius, 110 mm bore complete all as specified and directed.

S&F in repair PVC (SWR) branch piece, single, (Single Y), any radius, 110 mm bore complete all as specified and directed.

S&F in repair Bip tap, chromium plated, 15mm fancy type,complete all as specified and directed.

S&F in repair Angular stop cock, fancy type, chromium plated, 15 mm bore complete all as specified and directed.

Taking down cement plaster including racking out joints, hacking for key scrubbing down with water etc including removal of rubbish material from site.

M&L Rendering, 15 mm thick in CM 1:4, in two layers, first 5 mm thick with approved Water proofing compound @ 3% by the weight of cement or as per manufacturers instructions over a coat of 10 mm thick base coat finished even and smooth complete all as specified and as directed by Engineer-in-Charge. Note : WPC shall be measured and paid separately.

M&L for 10 mm thick plaster in cm (1:6) on fair faces of brick or concrete surfaces including finishing even & smooth without using extra cement.

M & L for preparation of old treated wood or wood based surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M / L precast cement concrete block massonry with solid blocks nexc 10 cm in width and setting in CM 1:4 type C1 1:3 :6 (20mm graded aggregate ) complete all as specified and directed.

M/L precast cement concrete block masonry with solid blocks exc 10 cm in width and settings in CM 1:6 type C1 1:3:6 (20mm graded aggregate) complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 (using 20 mm graded stone aggr ), 75 mm thick as in plinth protection finished even and smooth without using extra cement layed in bays not exc.2.00 ccomplete all as specified and directed.

M & L PCC 1:4:8 Type D2 ( using 40 mm graded aggrigate) as in foundations, filling and mass concrete complete all as specified and directed.

S&F Gun metal gate valve class I (ISI) marked with iron wheel head , screwed both ends for iron pipe , suitable for following bore of pipe including taking down old exesting unservisable gate valve of dia 20 mm complete all as specified and directed by Engr -in- charge

M&L cement concrete in surface channels and drains type C2 1:3:6 (40 mm graded aggregate ) complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms moulds mitred/stopped ends etc complete

M&L for vitrified double charged tiles lightshade (square /rectangular) polished area of each tiles exc 0.36 sqm but nexc 0.42 sqm in floors laid over and incl. 15mm thk 1:4 screed bed jointed pointed with coloured cement to match the tiles complete all as specified and directed.

Taking down shutters of any description nexc 1.0 Sqm reach complete.

Taking down shutters of any description exc 1.0 Sqm and nexc 2 sqm.

Demolition of Brickwork/solid concrete block work built in Cement mortar complete

Demolition of cement concrete (unreinforad) in ground floors and pavings n exc 15cm thickness (below or above ground level) complete all as specified and as directed.

Demolition of reinforced cement concrete in ground floors and pavings n exc 15cm thickness (below or above ground level) complete all as specified and as directed.

Dismantling of stone slabs and tiles of any description or thickness in floors aprons laid in any mortar

RCC nominal mix 1:2:4 type B-1 (using 20mm graded aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in kitchen shelves and the like including necessary formwork complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia quality conforming to Fe 500 or Fe-550 as in steel reinforcement for concrete complete all as specified and directed.

S&F Gl frame work for snapgrid false ceiling comprising of Gl perimeter channnel 0.55 mm thick with Main T- flange of 25 mm and web of 30 mm fixed to surrounding wall angle with flange and web 25 mm each , Cross T with flange 25 mm and web 25 mm fixed to main T, Main T is suspended from soffit @ 1200 mmm c/c using GI wire of 4mm thickness GI frame will be 60 x 60 cm to recieve E-board ceiling complete all as specified and as directed .

S&F 2nd class SW boarding 20mm thick fixed with nails in eaves board plained one side with butt joint complete all as directed.

S&F stainless steel wire cloth,0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples.

S&F butt hinges 75 mm medium weight, stainless steel, and fixed complete all as specified and directed.

S&F Butt hinges 125mm, medium weight, stainless steel, and fixed complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section and fixed complete 100 mm long complete

S&F extruded aluminium alloy handles fabricated type anodised of size 150 mm complete

S&F extruded aluminium alloy handles fabricated type anodised of size 125 mm complete

M&L for 4.80 mm thick sheet glass quality and glazing fixed to aluminium frame n.exc 0.50 sqm complete all as specified and as directed.

M&L for 4.80 mm thick sheet glass quality and glazing fixed to aluminium frame exc 0.50 sqm complete all as specified and as directed.

M&L for 4.80 mm thick frosted sheet glass quality and glazing fixed to aluminium frame n. exc 0.50 sqm complete all as specified and as directed.

Machine cut kota stone slab flooring 20-25mm thick over in including 15mm thick cement screed base in cm1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for scrubbing and polishing of existing kota stone with pigment match the shade of the stone slab complete all as specified and directed by Engr-in-charge.

M&L for 25 mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in sub base to recd floor tiles complete all as specified and directed

M&L for Non Skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile colour including Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM (1:6). complete all as specified and directed.

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking plateform, and other similar situation.

M&L rendering 15mm thick, CM 1:4 on fair faces of brick work or concrete surfaces complete all as specified and directed by Engr-Incharge.

Supply only Integral waterproofing compound

S&F 20 mm dia harrison rails, chromiun plated with wooden finished fancy type with fixing brackets stops , rollers etc all as directed and specified.

S&F 20 mm dia aluminium inodised double rod brackets all as directed and specified.

S&F in repair Bib tap standard of PTMT any colour high pressure screwed for iron pipe bore dia 15mm and fixed. (Minimum weight 15mm-90gms/20mm-125gms) complete all as specified and directed.

S&F stainless steel gratings 100mm bore size fixed with cement motar complete all as specified .

S&F Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms)

S&F shower arm 15 mm size, 195mm long with bend of 45 degree with flange of PTMT any colour.(Minimum weight 40gms

S&F in repairs pillar tap 15 mm, chromium plated, fancy type complete all as specified and directed.

M&L 75mm dia PVC(SWR)floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F PVC (SWR) bends 75mm dia complete all as specified and as directed

S&F stop valve/CP cast copper alloy screwed down, high pressure with crutch or butterfly handle 15mm dia complete all as specified and directed

S&F cutting chases, pinning in concrete block workmaking good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:2:4, type B-2 (using 40mm graded agg) as in plinth protection finished even and smooth without using extra cement.(incl necessary joint filling with mixture of paving bitumen & sand in 1:3) complete all as specified and directed.

M&L for PCC coping (1:2:4) type B-1 (using 20mm graded stone aggregate) over walls under roof sheets or over false ceiling complete all as specified.

M&L for PCC (1:3:6) type C2 using 40mm graded aggregates as in footpath, foundations, filling and mass concrete or any other directed and specified.

S&F MS framed work such as grills, gratings, etc with ends of bars, shouldered and/ or riveted or forged into spikes framed guard bars, barred iron doors, ladders, framed balusters, walk way, railing and framed work of water tanks and similar work confirming to Fe 290 Gde E-165 complete all as specified and as directed.

Complete removal existing treatment and applying 1mm thick of Birla white wall care putty to achieve smooth surfaces and applying two coats of Oil Bound Distemper of approved shade/tint complete all as specified and as directed.

M & L for preparation of new plastered/concrete surfaces of walls, providing 1 mm thick of Birla white wall care putty to achieve smooth surfaces and applying two coats of Oil Bound Distemper of approved shade/tint complete all as specified.

M&L for preparation of new steel surfaces of any description , over 10 cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat red oxide primer all as specified.

M&l new steel surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint, two coat of synthetic enamel paint over a coat red oxide primer complete all as specified.

M&L for preparation of new or previously untreated surfaces of wood and wood based materials of any description not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer all as specified and as directed.

M&L preparation surface of wood and wood based material new or old of any description and girth and treated with creosote oil complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of wood and wood based materials description n exc 10cm width or girth and applying two coat of synthetic enamel paint (ordinary tint) over pink primer surfaces when unconnected with other painting or when painted in different tint complete all as specified and directed.

M&L preparing old wall surfaces by washing rubbing down and stopping of distempered or any painted surfaces and priming with alkali resistant primer paint and applying two coats of cement base paint complete all as specified and directed.

M&L preparing new plastered surfaces by priming with alkali resistant primer paint and applying two coats of cement base paint complete all as specified and directed.

Excavation in post holes each n.exc. 0.5 cum in soft/loose soil getting out returning, filling in and ramming earth or broken rubble mixed with earth around in layer n.exc. 25 cm, watering and removing surplus soil to a distance n.exc. 50 mtr and making good surface complete all as specified and directed.

S&F steel work as in tubular , rafters, purlins, posts and similar work (round/square/rectangular shape of pipes as approved by Engr-in-charge ) trusses including posts, special shaped washers, gusset plates etc complete using ERW or induction butt welded tubes conformining to IS 1161-1998 grade St-240 complete all as specified and directed.

M&L for MS Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410 -W (Gde-E- 250) quality- A Fe comlete all as spd and directed.

S&F 0.63 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 and fitting of same manufacture of approved profile, shape and colour complete all as specified by Engr-in-Charge.

M & L for hardcore of broken brick/stone or boulders gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and remmed to a true surface, complete all as specified

M&L PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base and foundation filling mass concrete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete including all fittings and fixtures such as switches, pendant, lamp holder, regulators, socket outlet, etc and removing unserviceable materials from site of work and making good disturbed surfaces of walls, floors with cement mortar and white/colour wash to match with existing surfaces etc complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS-H, 1100 volt grade ISI marked with multi stranded copper conductor drawn through and including medium grade, ISI marked, PVC conduit not less than 20 mm dia with accessories, concealed on wall/ceiling surfaces and including provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS-H, 1100 volt grade, ISI marked with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box or pressed steel terminal boxes modular type of size/modules as required at site with earth dolly (boxes shall be galvanised or painted with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally) including provision of new covered plate over sunken box for housing the modular switches , modular socket outlets,modular fan regulators etc. for one light/fan/exhaust fan/bell point controlled by one way switch, complete all as specified and as directed by Engineer-in-Charge.

Description all as per Srl item No. 146 above but for one bell point controled by one bell push .

Description all as per Srl item No. 146 above but for socket outlet point 5 Amp on same board.

Description all as per serial item No. 146 above but for One 3 pin, 6 Amps, socket outlet controlled by one switch on independent board, complete all as specified and as directed by Engineer-in-Charge.

Description all as per serial item No 146 above but with 4 sqmm cable for 3 pin 15 Amps switch socket outlet (Power point) complete all as specified.

Description all as per serial item No. 146 above but for one socket outlet 16 Amp with 2.50 sq mm PVC insulated, unsheathed cable FRLS-H, 1100 volt grade ISI marked with multi stranded copper conductor along with 2.50 sqmm PVC insulated , unsheathed cable green colour FRLS-H, 1100 volt grade, ISI marked with multi stranded copper wire as earth continuity conductor connected to common earth dolly complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing of modular switch 1 module, single pole, one way 6 Amps flush type, 230 volts complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing of modular switch 1 module, single pole, one way 16 Amps flush type, 230 volts complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing of modular socket outlet 2/3 pin combined, 6 Amp, one way, two module, 230 volts complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing of modular socket outlet 3/3 pin combined, (6pin), 6/16 Amp, one way, two module, 230 volts complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing modular bell push 1 way 6 A module 230/250 volt with frame and cover complete , AC supply, ISI Marked, with cover plate complete all as specified and directed.

Supply and fixing call bell ding dong, AC, 230 V, Single pole ISI marked all as specified and directed.

Supply and fixing ceiling rose surface type 2/3 terminal polycarbonate, isolated body complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing electric water heater storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 ltr, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece, etc complete all as specified and directed.

Supply and fixing LED batten fittings 1x18 Watt complete pre wired fixed to wall with 2 nos PVC block of suitable size including taking down old unserviceable one complete all as specified and directed.

Supply and fixing LED light fitting with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S & F Exhaust fan 230 volts , 250mm,plastic body including making all electric connection complete all as specified and as directed including cutting of hole on wall and makng good disturbed surface of wall and outer wooden box for fan fix on wall complete all as specified and directed.

S&F lamp holder, insulated body, with back plate for batten fitting complete complete all as specified and directed.

Supply and fix in repairs LED lamp 7 Watt B22 base Color Temp 6500 K complete including taking down old unserviceable one all as directed.

Supply and fixing in repair, LED Bldg Security Light Fittings of capacity 25 watt made up of die cast aluminium housing with black epoxy powder coating with cover heat resistance glass safety input voltage range 170 to 270 volts, industrial model with IP-65 protection and other connected accessories including electronic driver and making electrical connection, service bracket of mild steel pipe 25 mm bore medium grade of length 0.70 mtr fixed to wall with two clamps made of 20 x 3 mm mild steel flat minimum 15cm long, 4 nos 8mm dia bolts with nuts and washer and suitable reducer for connecting fitting to GI pipe as required at site including two coats of synthetic enamel paint over one coat of red oxide primer on mild steel work complete complete all as specified and as directed by the Engineer-in-Charge.

Supply and fix in repairs MCB DB 4 way vertical sheet metal enclosure TPN 415 volts, 50 Hz, with IP-43 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete all as specified.

Supply and fix MCCB TPN, 240 Volts, 100 Amps, 10 kA rupturing capacity415 Volts complete all as specified and directed including taking down old one.

Supply and fix sheet metal MCB DB SPN 8 way with 200 Amps rated bus bar single pole and neutral with double door IP-54 fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection, including making smooth the disturbed surfaces including removing old unserviceable enclosure complete all as specified and as directed by the Engr-in-charge.

Supply and fix MCB SP, 6-32 Amps, 240 volt,10 KA , 'B' curve as per site requirement including removing old unserviceable MCB complete all as specified and as directed by the Engineer-in-Charge.

Supply and fix MCB SPN 40 Amps, 240 volt,10 KA , 'B' curve as per site requirement including removing old unserviceable MCB complete all as specified and as directed by the Engineer-in-Charge.

M&L for sub main wiring with two run of 6 sqmm PVC insulated , unsheathed cable FRLS-H,1100 volts grade ISI marked with multi stranded copper conductor and one run of 6 sqmm PVC insulated , unsheathed cable FRLS-H, 1100 volt grade ISI marked multi stranded copper conductor as earth continuty conductor connected to common earth dolly including concealed on wall/ceiling surfaces in and including PVC conduit medium grade ISI marked of adequate size for housing the wires complete all as specified and as directed by the Engineer-in-Charge. Note:- Three runs of 6 sqmm cable and one run of PVC conduit shall be measured and paid as one unit length.

Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to galvanised earth wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron.Earth wire protected by GI pipe 15mm bore(medium grade) and connected to earthing test point as directed and as specified and shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm c/c both ways with one handle for lifting made out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing as in repair complete all as directed by Engineer-in-Charge and earth testing on completion .

Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, including 20 mm casing caping PVC on wall/ceiling and incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild galvanised sunken box/metal flush box made out of 1.6 mm thick galvanised sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including accessories including making good the disturbed surfaces as per existing for one light point controlled by one switch complete all as specified and directed by Engr-in-charge.

Description all as per Srl item No 173 above but for socket outlet point 5 Amp on same board.

Description all as per Srl item No 173 above but for socket outlet point 5 Amp on Independent board.

Description all as per serial item No 173 above but with 4 sqmm cable for 3 pin 15 Amps switch socket outlet (Power point) complete all as specified.

Supply and fixing LED batten fittings 1x 20 Watt complete including LED light driver, holder, LED lamp and connection up to ceiling rose with three core wire fixed to wall with 2 nos PVC block of suitable size including taking down old unserviceable one .

S&F wall bracket decorative LED light fitting 10 watt Aluminium housing complete with necessary connection including taking down old unserviceable one.

Supply and fixing LED security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including bracket, clamps etc complete all as specified and directed

Supply and fix in repairs MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 200 Amps rated busbar with neutral link, 12 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed. Make: Schnieder/GE/C&S.

Supply and fix MCCB TPN, 240 Volts, 63 Amps, 10 kA rupturing capacity415 Volts complete all as specified and directed including taking down old one.

Supply and fix MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed including taking down old one.

Supply, lay in trenches, floors ,fix on wall/pole, passing through pipes etc.,LT UG cable , 1100 volts grade, PVC/ XLPE insulated , with multistranded aluminium conductors, armoured with galvanised steel wire or tape ,gland, lugs etc , of size 16 Sq.mm 4 core , confirming to IS specifications :-

Excavation in trenches not exc 1.5 m wde and 1.5 m deep for taking out/laying of UG cable/GI pipe of any dismeter in soft/loose soil and getting out complete all as specified and directed

Returning and filling including spreadking levelling watering and well ramming in layers not exc 25 cm thick soft/loose soil complete all as specified and directed

Removing excavated material at a distance n exc 50m and deposited where directed at a level not exc 1.5 above the starting point for soft/lose soil complete all as specified and directed

M & L for sand filing in treances for providing sand cushion for protection of UG cable complete all as specified and directed.

Supply and laying of sub class B bricks locally available alying perpendicular of UG cable complete all as specified and directed.

M/s Nishi Kumar Das (BID ID -3399615)

M/s M.L Consortium (BID ID -3400513)

M/S Mani Construction (BID ID -3402995)

M/S. Zoya Construction (BID ID -3400625)

M/S K.B.VENTURES PVT LTD (BID ID -3400102)