Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.2 LAccepted-AOC 255 VILLAGE UGRA POST OFFICE BARA AMBALA HARAYANA PIN 134003 | AMBALA | AMBALA | HARYANA | 134003 | ₹18.2 L Quoted ₹19.5 L | L1 | Accepted-AOC BEING LOWEST |
| 2 | L2₹20.0 LRejected-Finance 44 NEAR DURGA MANDIR TRIPURI TOABA TRIPURI TOWN PATIALA 147004 PB | PATIALA | PUNJAB | 147004 | ₹20.0 L | L2 | Rejected-Finance NOT BEING LOWEST |
| 3 | L3₹20.8 LRejected-Finance H NO 597 SEONA ROAD RANJIT NAGAR PATIALA PB 147001 | PATIALA | PATIALA | PUNJAB | 147001 | ₹20.8 L | L3 | Rejected-Finance NOT BEING LOWEST |
| 4 | L4₹22.1 LRejected-Finance 300 STREET NO 10 PREM BASTI SANGRUR PB PUNJAB 148001 | SANGRUR | SANGRUR | PUNJAB | 148001 | ₹22.1 L | L4 | Rejected-Finance NOT BEING LOWEST |
| 5 | Rejected-Technical | - | - | Rejected-Technical RENEWAL OF ENLISTMENT LETTER NOT UPLOADED |
| Sl No | Description | Qty | Unit | u and v engineers and consultants L1 | Jawandha Enterprises L3 | krishna engineers L4 | Mohinder Pal and Sons L2 |
|---|---|---|---|---|---|---|---|
| 1.00 | Material and labour for rewinding of ceiling fan of any size with super enameled copper wire of existing gauge incuding varnishing and drying complete reassembling & testing complete of size 1200 mm sweep complete all as specified and directed.
NOTE for item ser No 1 to 6 : -(i) Fans to be repaired/ rewinded will be handed over to contractor at MES store yard after cutting the burnt winding in presence of Engineer-in-charge and cost of cutting of winding shall be included in the quoted rate.
(ii) The cost of shifting the fan from MES store yard to contractors workshop and back shall be included in the item.
(iii) Fans will be issued to the contractor in lots of 10 Nos and more for which, contractor shall ensure that minimum lot of 10 number each be returned to the department on every fifth day from the issue of fans after carried out rewinding and other repair, in failing so, the amount @ Rs. 20/- per fan per day shall be deducted from the contractor due till the returning of fan duly tested. | 650 | Each Job | 250 ₹1.6 L | 400 ₹2.6 L | 330 ₹2.1 L | 300 ₹1.9 L |
| 2.00 | Material and labour for rewinding of ceiling fan of any size with super enameled copper wire of existing gauge incuding varnishing and drying complete reassembling & testing complete of size 1400 mm sweep complete all as specified and directed. | 200 | Each Job | 280 ₹56,000 | 425 ₹85,000 | 330 ₹66,000 | 300 ₹60,000 |
| 3.00 | Material and labour for new rotor assembly complete of any size with super enameled copper wire of existing gauge incuding varnishing and drying complete reassembling & testing complete of size 1200 mm sweep complete all as specified and directed.
NOTE for item ser No 1 to 6 : -(i) Fans to be repaired will be handed over to contractor at MES store yard after cutting the burnt winding in presence of Engineer-in-charge and cost of cutting of winding shall be included in the quoted rate.
(ii) The cost of shifting the fan from MES store yard to contractors workshop and back shall be included in the item.
(iii) Fans will be issued to the contractor in lots of 10 Nos and more for which, contractor shall ensure that minimum lot of 10 number each be returned to the department on every fifth day from the issue of fans after carried out rewinding and other repair, in failing so, the amount @ Rs. 20/- per fan per day shall be deducted from the contractor due till the returning of fan duly tested. | 400 | Each Job | 420 ₹1.7 L | 400 ₹1.6 L | 400 ₹1.6 L | 350 ₹1.4 L |
| 4.00 | Supply & fixing in replacement of NEW PCB unit of suitable size of existing make and description of make (Bajaj) for BLDC ceiling fan of 1200 mm sweep, single phase 240 V complete all as specified and directed by the Eng-in-charge. | 80 | Each | 400 ₹32,000 | 350 ₹28,000 | 500 ₹40,000 | 450 ₹36,000 |
| 5.00 | Supply & fixing in replacement of NEW PCB unit of suitable size of existing make and description of make Khaitan for BLDC ceiling fan of 1200 mm sweep, single phase 240 V complete all as specified and directed by the Eng-in-charge. | 40 | Each | 400 ₹16,000 | 350 ₹14,000 | 500 ₹20,000 | 450 ₹18,000 |
| 6.00 | Supply & fixing in replacement of NEW PCB unit of suitable size of existing make and description of make (Halonix ) for BLDC ceiling fan of 1200 mm sweep, single phase 240 V complete all as specified and directed by the Eng-in-charge. | 40 | Each | 400 ₹16,000 | 350 ₹14,000 | 500 ₹20,000 | 450 ₹18,000 |
| 7.00 | Dismantling of wall mounting/Cabin fan 380/400mm sweep, (any make and type , taking out rotor, removing all coils (burnt and alive), rewinding all the coils with suitable size super enamelled copper wire (ISI Marked) including all packing materials, insulating materials, varnishing, greasing, oil, re-assembling, split pins, body/blade screws and testing on full speed,. as per the direction of Engineer-in-Charge complete all as specified and directed. | 50 | Each Job | 350 ₹17,500 | 375 ₹18,750 | 500 ₹25,000 | 300 ₹15,000 |
| 8.00 | Dismantling of industrial wall mounting air circulator fan 450/600mm sweep, (any make and type , taking out rotor, removing all coils (burnt and alive), rewinding all the coils with suitable size super enamelled copper wire (ISI Marked) including all packing materials, insulating materials, varnishing, greasing, oil, re-assembling, split pins, body/blade screws and testing on full speed,. as per the direction of Engineer-in-Charge complete all as specified and directed. | 25 | Each Job | 400 ₹10,000 | 500 ₹12,500 | 350 ₹8,750 | 450 ₹11,250 |
| 9.00 | Dismantling of exhaust fan 380/450mm sweep, (any make and type , taking out rotor, removing all coils (burnt and alive), rewinding all the coils with suitable size super enamelled copper wire (ISI Marked) including all packing materials, insulating materials, varnishing, greasing, oil, re-assembling, split pins, body/blade screws and testing on full speed,. as per the direction of Engineer-in-Charge complete all as specified and directed. | 120 | Each Job | 450 ₹54,000 | 450 ₹54,000 | 320 ₹38,400 | 300 ₹36,000 |
| 10.00 | Dismantling of exhaust fan 225/300 mm sweep, (any make and type , taking out rotor, removing all coils (burnt and alive), rewinding all the coils with suitable size super enamelled copper wire (ISI Marked) including all packing materials, insulating materials, varnishing, greasing, oil, re-assembling, split pins, body/blade screws and testing on full speed,. as per the direction of Engineer-in-Charge complete all as specified and directed. | 300 | Each Job | 300 ₹90,000 | 350 ₹1.1 L | 320 ₹96,000 | 260 ₹78,000 |
Updated dates
Tender Value
Refer Docs
EMD Value
₹58,100
Closing Date
8 Apr 2026, 6:00 pmClosed
MAJ MOHAMMED AQIL AZEEM
GE NORTH PATIALA MILITARY ENGINEER SERVICES SANGRUR ROAD PATIALA CANTT
REPAIR OF CEILING FANS, EXHAUST FANS, AIR CIRCULATORS, DESERT COOLERS AND CONNECTED ITEMS AT PATIALA MIL STN UNDER GE (N) PATIALA
2026_MES_755884_1
GE (N)/TOKEN-107/2025-2026
Open Tender
Civil Works
210 days
PATIALA
AS PER TENDER DOCUMENTS
9 documents required · 9 mandatory
₹500
GE N PATIALA
₹58,100
Yes
25 May 2026
11 Mar 2026
11 Apr 2026
11 Mar 2026
8 Apr 2026
25 Mar 2026
Material and labour for rewinding of ceiling fan of any size with super enameled copper wire of existing gauge incuding varnishing and drying complete reassembling & testing complete of size 1400 mm sweep complete all as specified and directed.
Supply & fixing in replacement of NEW PCB unit of suitable size of existing make and description of make (Bajaj) for BLDC ceiling fan of 1200 mm sweep, single phase 240 V complete all as specified and directed by the Eng-in-charge.
Supply & fixing in replacement of NEW PCB unit of suitable size of existing make and description of make Khaitan for BLDC ceiling fan of 1200 mm sweep, single phase 240 V complete all as specified and directed by the Eng-in-charge.
Supply & fixing in replacement of NEW PCB unit of suitable size of existing make and description of make (Halonix ) for BLDC ceiling fan of 1200 mm sweep, single phase 240 V complete all as specified and directed by the Eng-in-charge.
Dismantling of wall mounting/Cabin fan 380/400mm sweep, (any make and type , taking out rotor, removing all coils (burnt and alive), rewinding all the coils with suitable size super enamelled copper wire (ISI Marked) including all packing materials, insulating materials, varnishing, greasing, oil, re-assembling, split pins, body/blade screws and testing on full speed,. as per the direction of Engineer-in-Charge complete all as specified and directed.
Dismantling of industrial wall mounting air circulator fan 450/600mm sweep, (any make and type , taking out rotor, removing all coils (burnt and alive), rewinding all the coils with suitable size super enamelled copper wire (ISI Marked) including all packing materials, insulating materials, varnishing, greasing, oil, re-assembling, split pins, body/blade screws and testing on full speed,. as per the direction of Engineer-in-Charge complete all as specified and directed.
Dismantling of exhaust fan 380/450mm sweep, (any make and type , taking out rotor, removing all coils (burnt and alive), rewinding all the coils with suitable size super enamelled copper wire (ISI Marked) including all packing materials, insulating materials, varnishing, greasing, oil, re-assembling, split pins, body/blade screws and testing on full speed,. as per the direction of Engineer-in-Charge complete all as specified and directed.
Dismantling of exhaust fan 225/300 mm sweep, (any make and type , taking out rotor, removing all coils (burnt and alive), rewinding all the coils with suitable size super enamelled copper wire (ISI Marked) including all packing materials, insulating materials, varnishing, greasing, oil, re-assembling, split pins, body/blade screws and testing on full speed,. as per the direction of Engineer-in-Charge complete all as specified and directed.
Supply and replacement of exhaust fan motor suitable for 225/230mm sweep complete including necessary fitting & connection. (Make:Khaitan/Cool home/Crompton Greaves
Supply and replacement of exhaust fan motor suitable for 300mm sweep complete including necessary fitting & connection. (Make:Khaitan/Cool home/Crompton Greaves
Supply and replacement of exhaust fan motor suitable for 380/450mm sweep complete including necessary fitting & connection. (Make:Khaitan/Cool home/Crompton Greaves
Supply and replacement of industrial wall mounted fan motor suitable for 450/600mm sweep complete including necessary fitting & connection. (Make:Khaitan/Cool home/Crompton Greaves
Opening up ceiling fan, exhaust fans, wall mounting/table fans, air circulator fans (any sweep, size or make) as kept unserviceable in E/M store yard for detection of defect and reassembling after cleaning, greasing and overhauling including replacement of split pins, body/blade screws and testing before depositing in store yard complete all as specified and directed. Note: Other spares necessary to be replaced shall be measured and paid for separately under following items of this schedule.
Supply and fix in replacement of Capacitor 2.5/3.15 mfd 230 Volts (+) 5 % dry type complete all as specified and directed. Make- TIBCON/ELCAP/'AD/TORCON)
Supply and fixing PVC capacitor assy two ways with fixing screws any type all as specified and directed
Supply and fix in replacement of capacitor suitable for PVC Exhaust fan motor 1.5 mfd 230 volts (+) 5 % dry complete all as specified and directed. Make- TIBCON/ELCAP/'AD/TORCON)
Supply and replacement of ball bearing for ceiling fans of any sweep/size/ any make complete all as specified and directed. Size of 6200,6201,6202,6203,6204 & size S-7/S-8 (Make of bearing : Make ABC/SKF/NBC. Note : Ball bearing shall be replaced in the store yard of E/M or in the civil workshop on lathe machine if required and cost thereof shall be included under this item.
Replacement of gun metal bush for ceiling fans, exhaust fans and cabins fans of any makes/size complete all as of specified and directed. Note : Bush shall be replaced in the store yard of E/M or in the civil workshop on lathe machine if required and cost thereof shall be included under this item. Note:- Cost of replacement of UNSV Shaft for exhaust fan of capacity 200/300mm sweep shall be included under this item.
Taking down and refixing of ceiling fan after supply and replacement of hanging assembly set comprising of rubber reels , mild steel clamps, nuts, bolts with one lock hole and lock pins suitable for any types of fans and rods complete all as specified and directed by Engr-in-charge.Note:-Contractor has to submit the certificate regarding serviceable condition of rubber reel, fan hook, clamp hook and split pin of ceiling fan.
Supply and replace fan regulator electronic, Piano type, stepped, AC 230 volts suitable for 1200mm/1400mm ceiling fan complete all as specified and directed .
Supply and replace fan regulator electronic, modular type as per sample, stepped, AC 230 volts suitable for 1200mm/1400mm ceiling fan complete all as specified and directed .
Replacement of Capacitor 4 mfd 230 Volts (+) 5 % dry type complete suitable for desert cooler all as specified and directed. Make- TIBCON/ELCAP/'AD/TORCON)
Replacement of ceiling fan blade (multipurpose type) suitable for 1200 mm sweep ceiling fan including nuts, washers etc complete all as specified and directed suitable for any make of fan. (white/Browm colour/as per site requirement).
Supply and connecting flexible Cable of copper wire 2 core of size 23/0.0076, 0.5 sq mm (white colour) complete.
Supply & fixing as in old/damaged body of Exhaust Fan including exhaust fan blade made of steel properly painted with all fixtures make as same of motor and size upto 300 mm all as directed by Engineer-in-Charge.
Supply & fixing as in old/damaged body of Exhaust Fan including exhaust fan blade made of steel properly painted with all fixtures make as same of motor and size upto 380/450 mm all as directed by Engineer-in-Charge.
Supply & fixing as in old/damaged body of wall mounted Fan including exhaust fan blade made of steel properly painted with all fixtures make as same of motor and size upto 450/600 mm all as directed by Engineer-in-Charge.
S&F in replacement of fan blade suitable for upto 300 mm dia PVC exhaust fan complete all as specified and directed. Note : Blade shall be suitable for Bajaj/ Crompton/ Usha/ Havells/ Polar make fans.
S&F in replacement louver shutter made out of 0.63 mm galvanised iron sheet for exhaust fan of 300/250 mm sweep size round or square as per site condition including fixing arrangement with fixing material complete all as specifed and directed.
S&F in replacement louver shutter made out of 0.63 mm galvanised iron sheet for exhaust fan of 380/450 mm sweep size round or square as per site condition including fixing arrangement with fixing material complete all as specifed and directed.
Replacement of PVC canopy (upper/bottom) for ceiling fan of any make and size all as directed by Engineer-in-Charge.
Supply & fixing clamp/ bracket for building security Light made out of MS pipe 15mm bore medium grade size 2 feet spray painted with synthetic enamel paint including nuts/gulmek ( 4 inch size) ( set of 02 nuts/gulmek) all as directed by Engr-in-Charge.
Supply & fixing down rod for ceiling fans made out of MS pipe 15mm bore medium grade 60 cm long duly threaded, holes drilled and spray painted with synthetic enamel paint all as directed by Engr-in-Charge
Supply & fixing down rod for ceiling fans made out of MS pipe 15mm bore medium grade 1.2 m long duly threaded, holes drilled and spray painted with synthetic enamel paint all as directed by Engr-in-Charge
Material and labour for painting of ceiling fan using synthetic enamel paint in two coats over a coat of primer of any make/sweep/model etc after cleaning/washing and fill up cavities using filler including writing MES NO Black Colour complete all as specified and directed.
Spray painting on outside body of the exhaust fan incl blades any size with synthetic enamel paint (smoke gray colour) including scrapping existing paint and incl writing MES Number with black paint all as directed.
Supply and fix ceiling fan box round cover plate size 8 inch complete all as specified and directed by Engr-in-chrge.
Supply and fixing in replacement by cutting sizes water proof plywood ISI Marked, 12mm thick, of required size incl necessary provisions for mounting in walls, openings and securing using fasteners 10 cms long and 8 mm dia for mounting of exhaust fans in various locations and sizes as directed.
S&F MS screw for fixing of ceiling fan blade of any size and type complete all as specified and directed. ( Set of 02 Screws for each blade)
Painting of one coat of primer red oxide and two coat of super enamelled paint for Desert cooler and matching the same on the exterior colour by metal paste/puty and of any size/ make complete all as specified and directed.
Dismantling of desert cooler motor,(any make and type,taking out rotor removing all coils(burnt and alive)rewinding all the coils with suitable size super enamled copper wire(ISI marked) including all packing materials,insulating materials,varnishing greesing oils,reassembling,split pins, body blade screw and testing on full speed as per the direction of EIC complete all as specified and directed . Note: Cost of Replacement of UNSV gun metal bush and shaft for desert cooler shall be included under this item
Supply and fixing in replacement submersible PVC body Tulu pump suitable for desert cooler of any size. Make- KHAITAN/COOL HOME/CG
Supply and fixing in replacement wood wool padding for desert coolers on all three sides ( for any size and type of cooler) all as directed.
Supply and fixing flexible PVC transparent 15mm bore pipe set comprising one pipe from pump to PVC junction and 3 Nos short pieces of pipe from junction to shutter.
Supply and replacement of fan motor 1/10HP capacity suitable for desert cooler complete including necessary fitting & connection. (Make:Khaitan/Cool home/Crompton Greaves
Supply and replacement of Desert Cooler body duly spray painted made out of 22 gauge MS sheet complete with front grill side shutters, control switch piano type 5 Amp speed regulator including lamp, wiring with suitable copper cable complete all as specified and directed.
Supply and fixing in replacement of PVC front grill (Jali) suitable to existing size.
Supply and fix as in replacement flexible copper conductor cable 3 core, PVC insulated of size 70/.0076 and connected electrically to any electric devices/of any capacity size type & make etc complete all as specified and directed.Make:KEI,Plaza,Kalinga,Havells
Supply & replacement of regulator knob type switch, 3 step control of speed of Desert cooler motor 230 volts, 50 Hz all as specified and directed.
S & F fan (PVC or metal) blade of suitable size for desert cooler complete all as specified and directed.
S & F Top Plug 3 Pin 5 Amps 230 Volts Make: Anchor/Plaza/Kalinga/Polycab
S & F metallic frame with set of 4 legs as per model suitable for fixing/mounting fan motor of desert cooler with nuts, bolts, rubber etc., complete all as specified and directed.
S&F in replacement of PVC water distributer and elbow for desert cooler ( for any type and size of desert cooler) all as directed and specified
Supply and replacement of PTMT Ball Valve suitable for 15 mm bore pipe complete suitable for desert cooler complete all as directed.
Taking down old unserviceable PVC ventilation fan after disconnecting the wire from ceiling rose and deposited to store yard of AGE E/M and supply and fix PVC ventilationt fan made out of plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 200 to 250 mm incl electrically connection complete all as specified and directed. Note:- Size of fan shall be decided by the Engineer-in-Charge.
Please Enable Macros to View BoQ information
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.71 MB
BOQ_846664.xls
BOQ • 0.38 MB
TENDERDOCUMENTS.pdf
Tender Documents • 2.13 MB
Download all tender documents and submit your bid