COMPREHENSIVE B/R REPAIRS TO OTM ACCN OF OLD NEHRA, NEW NEHRA AND ATA AT CMM AND PERIODICAL WORK IN THE PREMISES OF CDA OFFICE AND DAD COLONY AT LEKHANAGAR UNDER AGE B/R-I OF GE (EAST) JABALPUR

Amount

Dismantling of asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings complete all as specfied and directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specfied and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specfied and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F rolled mild steel section of Gde Fe-410W, Gde 250, Quality 'A' roof trusses (framed), trussed, purlins, crane gantries, rails and fastening and heavy bracket framing (beam, tee, angle channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.

S&F MS steel flat iron as in wind tie for roof sheet including securing bolts complete all as specified and directed.

Dismantling of wall & ceiling Boards (fibre, pulp, insulation etc) or insulation board/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

S&F anodised aluminium snap grid frame work for false ceiling with angle 25 mm x 25 mm x 1.5 mm fixed to perimeter of wall, main 'T' runner 38 mm x 25 mm x 1.5 mm and secondary/cross 'T' runner 25 mm x 25 mm x 1.5 mm to be interlocked in such a way that the size of grid shall be 605 mm x 605 mm including 6 mm dia GI hangers (upto 1200 mm length) adjusting level fixed to roof by means of ceiling cleats made out of GI flat 40 x 3 mm, 60 mm long and expansion hold fasteners 12.5 mm dia , 40 mm long and 4 mm thick Non asbestos fibre board (E-board or V board) designer tiles (Electra) suitably fixed in false ceiling grid/frame with staples or screws complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

S&F non skid ceramic coloured tiles (400 x 400) x 7 to 8mm thick as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including provision of 15 mm thick backing coat in CM 1:6 complete all as specified and directed.

S&F non skid ceramic coloured tiles (400 x 400) x 7 to 8mm thick as in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including provision of 10 mm thick backing coat in CM 1:4 complete all as specified and directed.

S&F non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.06 sqm but no.exc 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including provision of 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

S&F glazed ceramic coloured tiles (450 x 300) x 7 to 8 mm thick, in dado/skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match including provision of 10 mm thick backing coat in CM 1:4 complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20 to 25mm thick over and including 20mm thick cement screed in CM 1:6 base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for Kota stone slab 20 to 25mm thick in riser steps, skirting or dadao and pillar laid over and including 10mm thick backing coat in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for 18 to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in CM 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite including rounding laid over and including 20 mm thick screed bed in CM 1:6 rates including moulding and rounding complete all as specified and directed.

M&L for machine cut cudappah stone slab 20 to 25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing laid over and including 20 mm thick screed bed in CM 1:6 complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in roof/floors other than ground level beam, stair case, landing, chajjas and similar items including water proofing treatment in any layers and removal of debris to distance exc 250m and n.exc 500m from the site complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate levelling course average thickness 40 mm, to match the undulations of roof complete all as specified and directed.

M&L for rendering 10 mm thick on fair faces of concrete surface in CM 1:3 for receive the roof finishes with water proofing liquid complete all as specfied and directed. Note - WPL shall be measured and paid separately.

M&L for fillet of 75mm size using PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate at the junction of all horizontal and vertical surfaces complete all as specified and directed.

M&L for APP based polymeric membrane minimum weighing 3.50 kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric (weight not less than 160 gm/sqm) laid over primed surface including bituminous primer conforming to IS-3384-1965 applied @ 0.3 ltr/ Sqm by forced application complete all as speficied and directed. Three course roof treatment consists of as under :- (i) Applying one coat of bituminous primer conforming to IS-3384-1965 @ 0.30 ltr/Sqm. (ii) Laying APP based membrane as specififed. (iii) Applying a layer of blown grade bitumen 85/25 @ 1.2 Kg/Sqm conforming to IS : 702

M&L for APP based polymeric membrane minimum weighing 3 Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric (weightt not less than 150 gms /sqm) laid over primed surface including bituminous primer conforming to IS-3384 applied @ 0.3 ltr/Sqm by forced complete all as specified and directed. Four course roof treatment consists of as under :- (i) Applying one coat of bituminous primer conforming to IS-3384 @ 0.30 Ltr per sqm. (ii) Laying of APP based membrane as specified thickness and weight. (iii) Applying two coat of aluminium paint @ 100ml/sqm.

M&L for cement concrete tiles 25 cm x 25 cm x 22 mm thick, machine pressed including provision of 15 mm thick screed bed in CM 1:4 with using water proofing compound complete all as specified and directed.

Taking down chowkhat n.exc 1.5 sqm each without taking of shutter from frame complete all as specified and directed.

Taking down chowkhat exc 1.5 sqm but n.exc 4.00 sqm each without taking of shutter from frame complete all as specified and directed.

Taking down shutters of any description exc 1 sqm but n.exc 2 sqm each complete all as specified and directed.

Taking down shutters of any description exc 2 sqm each complete all as specified and directed.

Resecuring or easing and adjusting without taking down Shutters of any description exc 1 sqm but n.exc 2 sqm each complete all as specified and directed.

Resecuring or easing and adjusting without taking down shutters of any description exc 2 sqm each complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

S&F powder coated aluminium frame for doors, windows, ventilators or partition with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F powder coated aluminium ventilator shutters, partly fixed and partly louvered type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 Nos), hinges type B-21 100mm long (2 Nos), suitable handle (1 Nos) complete all as specified and directed.

S&F powder coated aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc including 6.3 mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 Sqm in each pane complete all as specified and directed.

S&F 4 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sqm in each pane complete all as specified and directed.

S&F 4 mm thick tinted sheet glass, with necessary clip or clamp, screws etc in square n.exc 0.5 sqm in each pane complete all as specified and directed.

S&F 12 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

S&F (factory made) steel windows with side hung shutters including projecting type hinges with lugs steel handles and steel peg stays, with glazing bars, devetailed or welded complete all as specified and directed.

S&F (factory made) steel windows with side hung shutters including projection type hinges with steel handle, and steel peg stay without glazing bars, dovetailed or welded complete all as specified and directed.

S&F 105 x 60 mm size of pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

S&F 125 x 60 mm size of pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

M&L for PCC 1:3:6 type C-0 using 12.5 mm graded crushed stone aggregate for filling of hollow pressed steel frame complete all as specified and directed.

S&F 25 x 3mm F1 hold fast conforming to Fe 290, Gde -E-165 complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate for fixing hold fast including repairing of disturbed plaster (while taking down Door/window,ventilator frame) and matching the repaired surface with existing one complete all as specified and directed.

S&F 35mm thick second class hardwood factory made flush shutters, solid, core construction with black board core and plywood face panals commercial type on both sides complete all as specified and directed.

S&F 35 mm thick second class hardwood factory made glazed and skelton shutters open rebated and prepared to receive glass gauge etc wihout sash bars sizes of the members of the shutters as specified in SSR Part-I Section 8 , Clause 8.24 (a) complete all as specified and directed.

S&F factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain coloured PVC sheet reinforced with MS square tube as specified & directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails M.S frame shall be covered with heat moulded plain colour PVC `C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail bottom rail on either side & as gap insert for top rail & bottom rail panel ling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stile & rails with suitable PVC sheet beading & joined together with solvent cement specified and shown on drawing complete all as specified and directed.

S&F solid PVC Double door frame of size 50mm x 95mm made out of 5mm single side prelam PVC sheet used instead of Plain colour PVC sheet reinforced with M.S. tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F 18mm thick Solid PVC Sandwich Panel with lmm plain colour PVC Sheet on both sides suitably fixed in M.S. angle frame work as per specification & drawing complete all as specified and directed.

S&F 100mm butt hinges extruded aluminum alloy with galvanised mild steel hinge pin anodised type B-21 complete all as specified and directed.

S&F 150 mm extruded aluminium alloy handles, fabricated type, anodised and fixed complete all as specified and directed.

S&F 300 mm Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections and fixed complete all as specified and directed.

S&F 150 mm long aluminum anodized barred tower bolts of extruded section complete all as specified and directed.

S&F Aluminium door stopper of size 150 mm long double legged fixed to bottom rail of door shutter provided with rubber bushing at one end to stop the door at floor and other end provided with aluminium plate base fixed with door shutter with screws at appropriate height complete all as specified and directed.

S&F MS 300mm helical door springs including roller and roller plate complete all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F in repair 150mm brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed.

S&F in repair 150mm size extruded alluminium alloy handle fabricated type anodaised complete all as specified and directed.

S&F in repair 150mm size extruded brass handle fabricated type polished complete all as specified and directed.

S&F in repair 300mm size length alluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolt and sliding bolt of extruded section or cast alluminium alloy complete all as specified and directed.

S&F in repair 300mm Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed.

S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.50 Sqm in each pane complete all as specified and directed. complete all as specified.

Demolition of concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for PCC 1:5:10, type E-2 using 40mm graded crushed stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L 15 mm thick renedering on fair faces of brick work or concrete surfaces in CM 1:3 finished even and smooth without using extra cement with using water proofing liquid complete all as specified and directed. Note - WPL shall be measured and paid separately.

Applying acrylic cementicious polymer modified elastomeric waterproofing & protective coating like brush bond of Fosroc or Pidifin 2K (Pidilite) as per manufacturer instructions on rendered surfaces of floor and wall of sunken portion complete all as specified and directed.

Demolition of brick work/stone masonry/ PCC block masonry built in cement mortar or cement lime mortar including all quoins, pillars, arches etc, but excluding ashlar facings dressed stone work and precast concrete articles complete all as specified and directed.

Taking down cement plaster on brick/concrete/stone surfaces including racking out jointing hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for old size bricks with fly ash bricks straight or curved on plan exc 6m mean radius and setting in CM 1:6 etc complete all as specified as directed.

M&L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate in coping and bed blocks for angle iron post including necessary formwork/moulds complete all as specified and directed.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified of face beds and joints as specified of random rubble walling, uncoursed or brought upto courses with 40mm maximum depression on face from straight edge held against the dressed surfaces complete all as specified and directed.

M&L for flush pointing to random rubble masonry, uncoursed or brought upto course in CM 1:3 complete all as specified and directed.

M&L for rendering 10 mm thick on fair faces of brick or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick on brick work or concrete surfaces in CM 1:6 finished even and smoothe without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in CM 1:4 in tow layers, first one 10 mm thick plaster in CM 1:4 and second one 5 mm thick in CM 1:4 with liquid water proofing comppound @ 150 ml per bag of cement finished evern and smooth without using extra cement complete all as specified and directed. Note - WPL shall be measured and paid seperately.

M&L for rendering 5 mm thick cement plaster on ceiling in CM 1:3 finished even and smooth without using extra cement complete in complete all as specified and directed.

M&L for preparation of new plastered surfaces of celling and applying two coat of white wash complete all as specified and directed.

M&L for preparation of old decorated plastered surfaces of ceiling and applying one coat of whitewash complete all as specified and as directed.

Supply only liquid water proofing compound (ISI Mark) complete all as specified and directed.

M&L for mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

Taking up or down 15mm bore steel water tubing & connections, including cleaning for refixing complete all as specified and directed.

Taking up or down 20 mm bore steel water tubing & connections, including cleaning for refixing complete all as specified and directed.

S&F 15mm bore medium grade galvanised tube with all fitting & fixed complete to walls or ceiling & laid in floors complete all as specified and directed.

S&F 20 mm bore medium grade galvanised tube with all fitting & fixed complete to walls or ceiling & laid in floors complete all as specified and directed.

Cutting chases, pinning in. making good to facings where required and pointing in CM 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting n.exc 10 cm girth in brick wall complete all as specified and directed.

Dismantling of water tanks of 500 ltrs capacity and removing to store and S&F of 500 ltrs rotational moulded polythelene water storage tanks (02 layered) ISI marked (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed.

Dismantling of water tanks of exc 500 ltrs and n.exc 1000ltrs capacity and removing to store and S&F of 1000 ltrs rotational moulded polythelene water storage tanks (02 layered) ISI marked (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed.

Cleaning and removing all scale and dirt etc from water tanks and from mouths of circulating pipe exc 500 but n.exc 1000 ltr capacity tank complete all as specified and directed. Note - After cleaning write the date of cleaning with paint on tank.

Cleaning and removing all scale and dirt etc from water tanks and from mouths of circulating pipe exc 250 but n.exc 500 ltr capacity tank complete all as specified and directed. Note - After cleaning write the date of cleaning with paint on tank.

S&F 20mm bore ball brass valve, high pressure with polythene float & fly nut complete, screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F in repair 20mm bore Gun metal gate valve with iron wheel head screwed both end for iron pipe complete all as specified and directed.

Demolition and breaking up 100 mm dia drain pipes (Salt glazed ware, PVC, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.

S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubberring joints fixed to walls 75mm bore complete all as specified and directed.

S&F 110mm bore PVC (SWR) bend with access door complete all as specified and directed.

S&F 110mm bore PVC (SWR) branch piece, single `Y’ equal or un equal with access door complete all as specified and directed.

S&F 75mm bore PVC (S.W.R) bend with access door complete all as specified and directed.

S&F 110mm bore PVC vent cowl complete all as specified and directed.

S&F PVC floor trap 75 mm dia with CP gratings complete all as specified and directed.

S&F PVC nahani trap 110 mm dia with CP gratings complete all as specified and directed.

S&F in repairs brass chromium plated bottle trap for wash basin/sink with inlet and outlet screwed for pipe or connections including necessary packing, union and cap bore of trap 32mm fixed complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including seat cover complete all as specified and directed.

S&F in repairs vitreous china water closet squatting pan 'orissa pattern, ivory coloured of size 580 x 440 mm, with integral foot rest and outlet for 'P' or 'S' trap, WC pan shall be set in lean concrete below level of rim of pan to receive the floor finish complete all as specified and directed.

S&F in repair PVC valveless syphonic action type flushing cistern 10 ltrs capacity low lwvel, white with inlet ball valve, float and handle including brackets flush pipe of polythene of low or high density of PVC 32mm dia for low level cistern complete all as specified.

S&F in repairs Vitreous China wash basin, white, flat back, size 550 x 400mm including brackets complete all as specified and directed.

S&F in repairs vitreous china white counter oval shape wash hand basin of size 630 x 450mm including brackets complete all as specified.

S&F in repairs vitreous china urinal, Half stall type white, with grating and union etc complete all as specified and directed.

S&F pressmatic push cock 15mm dia for urinal including all fittings, screws etc complete all as specified and directed.

S&F brass chromium plated urinal spreader with brass CP connector complete all as specified and directed.

S&F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including 40 mm waste coupling and waste pipe of suitable length complete all as specified and directed.

S&F waste coupling brass CP for glazed ware sink, WHB etc with long screwed shanks and fly nuts complete of 32mm dia etc complete all as specified and directed.

S&F in repairs tubular towel rail 20 mm dia 'D' type 600mm long of stainless steel complete all a specified and diredted.

S&F in repairs 15mm bore fancy type chromium plated bib taps with crutch or butterfly handle screwed down for iron pipes complete all as specified and directed.

S&F in repairs angle stop valves 15mm bore, fancy type chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs 15mm bore PVC connection with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair 15 mm dia brass CP wall mixer unit for mixing hot & cold water screwed down for iron pipe and fixed including all necessary fittings complete all as specified and directed.

Supply and fix swan neck long body 15 mm bore CP pillar taps, fancy type, cast copper alloy with capstan heads screwed down high pressure with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed.

Supply and fix in repair swan neck long body 15 mm bore CP pillar taps, fancy type, cast copper alloy with capstan heads screwed down high pressure with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.

S&F in repair brass chromium plated shower rose 125mm size complete all as specified and directed.

S&F in repairs 20 mm dia curtain rod brass chromium plated with fixing fancy bracket stops rollers etc complete all as specified and directed.

S&F in repair kitchen steel plate rack of size 786 x 914 x 254mm stainless steel 1mm thick of standard quality complete all as specified and directed.

S&F repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

Demolition of cement concrete (un reinforced) in ground floor and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed.

M&L for PCC 1:4:8 type D-2, 75mm thick using 40mm graded crushed stone aggregate as in sub base complete all as specified and directed.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for 60 mm thick glossy finish machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of M-35 grade complete all as specified and directed.

S&F glossy finished chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

S&F in repair 15 mm bore bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs Seat cover ( colour - white ) for Vitreous China wash down water closet pan (pedestal pattern) complete all as specified and directed.

S&F in repair CP health faucets including all neceesary fittings specifictions complete all as specified and directed.

S&F in repair CP Cloth peg set including fittings complete all as specified and directed.

S&F (fixed in repair) CP 15mm dia two way bib cock specifictions complete all as specified and directed.

S&F in repair PVC waste pipe 32 /40 mm dia x 600 mm long complete all as specified and directed.

S&F in repairs 40mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F in repairs 32mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F in repairs 20mm bore ball brass valve, high pressure with polythene float and flynut complete, scrwed for iron pipe or brass ferrule fixed in repair complete all as specified and as directed.

S&F in repairs ISI Marked water tank lids with all necessary fittings complete for 500 ltr & 1000 ltr capacity pvc water tanks complete all as specified and as directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed.

Dismantling fencing wire mesh/chain link any type complete all as specified and directed.

S&F posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting/welding, etc and similar work conforming to Fe-410-0 or Fe 310-0 complete all as specified and directed.

Supply only chain link MS galvanisd fencing, any size or type complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provission of binding wire complete all as specified and directed.

S&F in repair aluminium ( die cast body )door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and, ISI mark complete all as specified and directed.

S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F in repair glass corner 8 to 10 mm thick of 300 mm dia with SS railing over it including all fittings and fixtures complete all as specified and directed.

M&L for preparing new steel surfaces and applying two coat of synthetic enameled paint over a coat of red oxide primer exc 10 cm width or girth complete all as specified and directed.

M&L for preparation of new or previously untreated wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparatiion of old painted wooden surfaces of any description exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of surfaces of newly plastered walls and applying two coats of oil bond distemper over a coat of alkali resistant priming preparatory to distempering complete all as specified and directed

M&L for preparation of surfaces of newly plastered ceiling surface and applying two coats of oil bond distemper over a coat of alkali resistant priming preparatory to distempering complete all as specified and directed

M&L for preparation of newly plastered surfaces of wall and applying two coat of cement based paint over one coat of chalk whitening complete all as specified and directed.

M&L for preparation of old decorated plastered surface of ceiling and applying one coat of OBD complete all as specified and directed.

M&L for preparation of old decorated surface ofwalls and applying one coat of oil bond distemper complete all as specified and directed.

M&L preparation of old painted steel surfaces of any description exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of surfaces of newly plastered wall and applying two coats distmper oil emulsion over a coat of primer including average 3 mm thick wall care putty complete all as specified and directed.

M&L for prepraring newly plastered surfaces of wall and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new/old treated surfaces of wall.

Finishing walls with textured exterior paint of required shade : New work (Two coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm complete all as specified and directed.

Schedule of credit amount of Rs. 1,39,059.00 to be deducted during AOC.

M/S BHARTI ENTERPRISES

M/s Brij Constructions

JITENDER SINGH

Goodluck Enterprises

Bidder Name

a k builders