Nit No. 33 Item No. 02

Amount

SITC of 5 HP openwell horizontal Mono Submersible Pumpset 65mm x 50 mm discharge not less than 800 lpm for operation on Three phase 415V , 50Hz AC supply alongwith suitable DOL control panel , 6-10A relay range, complete with ammeter 0-20A, 0-500V , MCB , phase indication lamp etc ,CPRI approved complete as required

SITC of hot press moulded SMC panel/canopy box of size OD 920 mm x 460 mm x 260 mm & ID 900 mm x 450 mm x 250 mm anti corrosive , rust proof , dust proof , shock proof , self-extinguishing property , resistant to heat , vermin proof , ultra-voilet stablised , pilfer resistant , suitable for mounting , 1 no three phase starter , 1 nos 63 Amps four pole isolator and 1 three phase energy meter , socket for outgoing connection with pilferage proof SMC door duly welded with S/S handle having danger logo on its outer surface with one no hot dip galvanised iron stand for a base of size 40mm x 40 mm x 5 mm and heigth of stand is 600 mm including 300 mm height below the ground with side strip of size 25 x 5 mm

Providing and laying in position cement concrete 1:3:6 (1 cement : 2 coarse sand : 6 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m All kinds of soil

Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)

SITC of 1m dia ring made of 40 mm cross section size GI pipe, with sockets for nozzles assembly provision, with supporting leg complete in all respect including threading flanges nut/bolts etc as reqd

SITC of 2m dia ring made of 40 mm cross section size GI pipe, with sockets for nozzles assembly provision, inlet with supporting leg complete in all respect including threading flanges nut/bolts etc as reqd

SITC of 12 mm size Crown Jet Nozzles in Brass with chrome plated

SITC of 20 mm size Vertial Jet Nozzles in Brass with chrome plated

SITC of 750x900 mm dia Debris Collection Strainer complete with fixing etc as required.

SITC of Following Size Upvc Pipe for branching with all accessories like elbows, tees, sockets including cutting, threading, welding complete as required.

50 mm Dia Complete as reqd.(10kg pressure)

63 mm Dia Complete as reqd.(10kg pressure)

32 mm Dia Complete as reqd.(10kg pressure)

SITC of Following Size Upvc Ball valve and accessories complete as required.

50 mm Dia Complete as Reqd.

32 mm Dia Complete as Reqd.

SITC of water proof LED 18 w RGB LED lights made out of die cast stainless steel suitable 304 gr suitable to be fitted with emitter type power LED's with all in one optical lens of 85% effeciency step tempered glass 8 mm with protection class of IP-68 i/c connection & water proof jointing etc Completeas required

SITC of straight through water proof joint I/c ferrules and other jointing material for size upto 6 sq mm copper conductor submersible cable complete as reqd.

SITC of Constant Voltage Driver(CVD) for LED lights 24 Volts complete as required.

Supplying and Fixing of Programeble DMX for LED lights 24 Volts complete as required.

Providing and fixing gun metal non- return valve of approved quality (screwed end) : 50 mm nominal bore ( Horizontal )

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :

40 mm nominal bore

50 mm nominal bore

Supplying, lowering and fixing following size of G.I. Pipe (M- Class) i/c cutting threading on both sides etc ISI marked etc as reqd. (b) 40 mm dia

(c) 50 mm dia

S& F following sizes of GI Elbow as reqd. (b) 40 mm dia

(c) 50 mm dia

S&F following sizes of GI socket as reqd. (b) 40 mm dia

(c) 50 mm dia.

P&F of following sizes of PVC insulated & PVC sheathed copper conductor 3 core submersible cable confirming to IS.694/1990 etc. as reqd. (b) 3 x4 sq.mm.

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Upto 35 sq. mm

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessedconduit as required. 20 mm