CERTAIN SPECIAL REPAIR, REVENUE WORK AND MINOR WORKS OF B/R AND E/M NATURE AT DAMANA AND SUNJUWAN UNDER GE JAMMU

Amount

B/R Portion: - Taking down chowkhats or frames with shutter without taking off shutter from the frame not exceeding 1.5 Sqm each including cutting holes for taking out hold fast or dismantling brick (holes cut and any other damage to jambs, wall for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt) complete all as specified and as directed.

Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement supplying and fixing in the frame at site as per specification and drawing complete all as specified and as directed.

Supply and fixing solid PVC door frame of size 50mm X 47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube complete all as specified and as directed.

Supply and fixing butt hinges 100mm long medium weight cold rolled mild steel and fixed complete all as specified and as directed.

Supply and fixing 250mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.

Supply and fixing 100mm long aluminium anodised, cast type handles complete all as specified and as directed.

Supply and fixing 150mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed.

Dismantling asbestos cement (corrugated or semicorrugated etc) sheets in roof covering complete all as specified and as directed.

Dismantling timber scantling 40 sqcm and over in section framed work of any description complete all as specified and as directed.

Material and labour for pre-painted galvalume zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Supply and fixing for structural steel works of Fe-410W (Gde E 250) quality 'A', as n roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc including painted one shop coat of zinc chromate / red oxide primer paint (inluding preparation of surface) before fabrication complete all as specified and as directed.

Supply and fixing plates (plain or chequered channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and as directed.

Material and labour for mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 22.5 cm and not exceeding 30cm long, diameter of neck 16mm to 20mm complete all as specified and as directed. Make: - Conforming to IS

Material and labour for applying two coats of synthetic enamel paint tint over one coat of red oxide, zinc chrome after preparation of new surfaces of steel of any description, over 10cm in width or girth when unconnected with other painting or when painted in a different tint complete all as specified and as directed.

Taking down cement plaster of any description on brick or stone walls or from concrete surface including racking out joints, hacking for key, scrubbing with water etc complete all as specified and as directed.

Material and labour rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:6) surface finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:4) surface finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering 5mm thick on fair faces of brick work or concrete surfaces on ceiling 1:3 finishing the surface even and smooth without using extra cement complete all as specified and as directed.

Material and labour for preparing surfaces plastered or unplastered new surface of ceiling and applying three coats of white wash on ceiling complete all as specified and as directed.

Material and labour for preparing surfaces plastered or unplastered new surface of walls and applying three coats of white wash on walls complete all as specified and as directed.

Material and labour for preparation of wall plastered or unplastered surfaces and applying two coats of cement based paint over a coat of cement primer complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified and as directed.

Material and labour for non skid ceramic coloured tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc including and over 15mm thick screed bed or bedding layer of CM 1:4 set and jointed in neat cement slurry and pointed in white or colored cement to match the surface of tiles finish complete all as specified and as directed.

Material and labour glazed ceramic coloured tiles in vertical surfce (350 X 250) / (300 X 450) X 7mm thick as in vertical surfaces including 10mm thick rendering in CM 1:3 set and jointed in neat cement slurry and pointed in white or colored cement to match the surface of tiles complete all as specified and as directed.

Taking up or down steel tubing and connection including cleaning for refixing 15mm dia bore complete all as specified and as directed.

Taking up or down steel tubing and connection including cleaning for refixing 20mm dia bore complete all as specified and as directed.

Supply and fixing tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors for 15mm bore complete all as specified and as directed.

Description same as per Ser Item No 27.00 here-in-before but except pipe complete all as specified and as directed.

Supply and fixing tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors for 20mm bore complete all as specified and as directed.

Description same as per Ser Item No 29.00 here-in-before but except pipe complete all as specified and as directed.

Supply and fixing in repair 500 litre rotational moulded polyethylene water storage tank (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I in repair including dismantling of old tank complete all as specified and as directed.

Supply and fixing in repair fancy type CP bib tap cast copper alloy 15mm bore screwed down screwed for iron pipe or for brass ferrule complete all as specified and as directed.

Supply and fixing in repair fancy type CP, 15mm dia concealed stop cock, cast copper alloy screwed above high pressure with crutch or butterfly handle and screwed both ends for iron or for union complete all as specified and as directed.

Supply and fixing in repair fancy type CP, 15mm dia stop / angle valves, cast copper alloy screwed above high pressure with crutch or butterfly handle and screwed both ends for iron or for union complete all as specified and as directed.

Supply and fixing in repair 15mm bore pillar taps, fancy type, cast copper alloy, with capstan heads, CP screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and as directed.

Supply and fixing in repair 20mm bore dia gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

Supply and fixing in repair 20mm dia ball valve PTMT, high pressure with polythene float and fly nut complete screwed for iron pipe complete all as specified and as directed.

Supply and fixing in repair CP shower rose, 15mm dia with or without swivel joints, any size including fixing to steel pipe or union complete all as specified and as directed.

Supply and fixing vitreous china, Orissa pattern water closet seat of size 580mm X 440mm white with and including CI 'P' or 'S' trap and provision of lime concrete bedding in repairs complete all as specified and as directed.

Supply and fixing in repairs PVC connection 15mm size with PTMT nut of length 450mm complete all as specified and as directed.

Supply and fixing in repair PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float and handle including flush pipe of CP brass suitable for IWC / EWC, 10 litre capacity complete all as specified and as directed.

Supply and fixing in repair CP towel rail 20mm dia and 600mm long including a pair of CP brackets fixed with plastic rawl plugs and CP screws complete all as specified and as directed.

Supply and fixing in repair vitreous china wash hand basin, white size 550 X 400mm including bracket, PVC waste pipe and CP waste coupling complete all as specified and as directed.

Supply and fixing in repair for Vitreous china urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinals against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe complete all as specified and as directed.

Taking down eaves gutters and rain water pipe etc of any size / dia and pattern, including all fittings and removal from site complete all as specified and as directed.

Supply and fixing PVC (SWR) pipes, 110mm single socketed in any length with rubber ring joints fixed in walls complete all as specified and as directed.

Supply and fixing PVC (SWR) pipes, 75mm single socketed in any length with rubber ring joints fixed in walls complete all as specified and as directed.

Supply and fixing in repair PVC (SWR) bend any radius of 110mm bore complete all as specified and as directed.

Supply and fixing in repair PVC (SWR) bend any radius of 75mm bore complete all as specified and as directed.

Supply and fixing in repair PVC (SWR) gully trap 100/110mm, setting and jointing with solvent cement complete all as specified and as directed.

Supply and fixing in repair PVC (SWR) floor trap 75mm with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repair 75mm dia PVC (SWR) cowls complete all as specified and as directed.

Supply and fixing sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm X 460mm bowl size 410mm X 330mm X 160mm complete all as specified and as directed.

Supply and fixing kitchen plate rack of stainless steel of size 900 X 800 X 230mm made out of 1mm thick stainless steel sheet complete all as specified and as directed.

Supply and fixing grating square 150mm size of PTMT (minimum weight 100 grams) including all necessary fittings such as hinges including embedding in tiles with white cement complete all as specified and as directed.

Supply and fixing bib tap cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe for brass ferrule of size 15mm bore complete all as specified and as directed.

Supply and fixing steel water tubing grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc) of nominal bore 15mm complete all as specified and as directed.

E/M Portion: - Taking down old unserviceable copper / aluminium point wiring concealed / batten (light, fan, socket or power) complete, including fixture and fittings such as switches, sockets, ceiling roses, bell push, bell electric, lamp holder, bulk head fitting, pendants, regulators, sockets, light fitting and any type switch board wooden / iron, round block etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc complete all as specified and as directed.

Taking down old and unserviceable distribution board any type including MCB's etc after removing all connection and make good the disturbed surface complete all as specified and as directed by Engineer-in-Charge.

Material and labour for point wiring for one light / fan / 5 Amps independent socket point / call bell point controlled by one 5 Amp switch with 1.5 Sqmm single core multistranded copper conductor FRLS, PVC insulated (unsheathed) heavy duty cable including continuous earth wire of size 1.5 Sqmm copper conductor multistranded FRLS, PVC insulated (unsheathed) drawn into and including new concealed PVC rigid / steel conduit 1.8 mm wall thickness ISI marked terminated into CI / pressed steel terminal boxes including 3.00mm thick hylam brand IS-2036 marked, laminated sheet cover for mounting switches, sockets, fan regulators etc complete all as specified and as directed. Note: - (a) Wiring shall be done by using proper colour coding. (b) Earth wire shall be of green colour. (c) On RCC roof / ceiling PVC conduit shall be provided on surface with proper fixing clips all as directed by Engineer-in-Charge.

Description same as per Ser Item No 61.00 here-in-before but 5 Amps socket outlet on same board complete all as specified and as directed.

Description same as per Ser Item No 61.00 here-in-before but socket outlet 5 Amps on independent board complete all as specified and as directed by Engineer-in-Charge.

Description same as per Ser Item No 61.00 here-in-before but for one 6 pin socket outlet 15 Amps on independent board with cables 2.5 Sqmm size complete all as specified and as directed.

Material and labour for distribution board sheet steel phosphatised powder coated for MCB with copper bus bar and neutral link earthing stud SPN 4 way 240 Volts double door complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in replacement for MCB SP 6 to 32 Amps, 240 Volts 'B' Series complete all as specified and as directed.

Supply and fixing in replacement for MCB SPN 32 Amps, 240 Volts, 'B' series complete all as specified and as directed.

Supply and fixing in replacement for switch piano, flush type single pole one way 5 Amp, 240 Volts of size 300mm sweep with blades, frame and louvers complete all as specified and all as directed.

Supply and fixing in replacement socket outlet 5 Amp / 5 pin flush type complete all as specified and as directed.

Supply and fixing in replacement socket outlet 15 Amps, 240 Volts, 6 pin flush type complete all as specified and as directed.

Supply and fixing in replacement for switch piano, flush type single pole one way 15 Amps, 240 Volts complete all as specified and as directed.

Supply and fixing in replacement for ceiling rose 3 terminal surface type complete all as specified and as directed.

Material and labour in replacement for lamp holder, insulated body, with back plate suitable for batten fittings complete all as specified and as directed.

Material and labour in replacement self ballast LED retrofit lamp with PVC body and PC Diffuser 9 watt 230 Volt 6500K complete all as specified and as directed.

Supply and fixing in replacement new generation energy saving, wall mounted LED tube light batten fittings, extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver 20 watt LED duly fitted on PVC square block 6500K (4' ft long) with LED rod 20 watt, 230 Volts, 50 Hz complete all as specified and as directed.

Material and labour for Earthing complete with galvanised mild steel earth plate electrode of size 60 X 60cm X 6.3mm thick buried directly in ground earth vertically at a depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.50 metre below ground level connected to galvanised iron or earth lead wire 4 mm dia (8 SWG) as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron earth plate electrode surrounded by a packed thickness of charcoal or choke dust mixed with common salt in alternate layers not exceeding 150mm thick, GI wire protected with and including galvanized iron pipe 20mm bore (dia) light grade, upto 1.0 metre above the floor level of the building where main switch / DB situated including PCC pit in cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) and precast RCC cover using reinforcement with suitable handle made of round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube for watering with one end fixed with cast iron funnel and wire mesh 15mm dia bore light grade galvanised steel tubing upto 5m length for drawing earth lead wire protection, common salt, charcoal etc complete all as shown in electrical plate No. 3 of MES Schedule Part-I and testing on completion including taking down unserviceable earthing complete all as specified and as directed.

Supply and fixing in replacement for LED street light fitting 35 watt 230 Volt AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP-65/66 protection complete all as specified and as directed.

Material and labour in replacement for laying PVC flat serviceable cable, multistranded aluminium conductor 16 Sqmm 2 core in air hang with proper GI earth wire and reinsulators space 1 mtr distance each / on pole / on wall / trenches / through pipe complete all as specified and as directed by Engineer-in-Charge.

Supply and installed water heater storage type (Geyser) BE 5 star rating, confirming to ISI complete, capacity 25 litres complete all as specified and as directed.

Labour for fixing of 4 No's rawl plug of suitable size (4" to 6") nuts and bolts, grouting work in RCC / Brick wall, cemented works, labour charges for cutting to existing GI pipe line of size 15mm dia in position for insertion of tee or branch connection jointing complete with necessary GI fittings, plumbing work all as per site requirement complete all as specified and as directed.

Material and labour for sub main wiring with proper color coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 2 run 4 Sqmm for phase and neutral and one run of 2.5 Sqmm for earth wire unsheathed, multistranded, copper conductor FRLS, drawn through rigid PVC concealed conduit fixed on wall complete all as specified and as directed. Two runs of cable for phase / neutral and one run of cable for earth will be measured and paid as one unit length. Note: - Wiring shall be done in proper colour coding.

Supply and fixing MCB DB 2 pin with earthing plug CRCA body with MCB 32 Amps complete all as specified and as directed.

Supply and fixing stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15mm dia of pipe complete all as specified and as directed.

Supply and fix PVC connection of size 15mm dia with PTMT nuts of length 450mm long (hot series braded, threaded and cold series) complete all as specified and as directed by Engineer-in-Charge.

Labour for cutting to existing GI pipe of size 20 / 25 mm dia in position for addition / alteration or insertion of TEE for branch connection complete with cutting, threading and jointing / fixing including GI fitting as per site requirement complete all as specified and as directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 Volts, 1200mm sweep. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed.

Supply and connection of PVC insulated, unsheathed multistranded, three core twisted copper flexible cable of size 1.5 Sqmm complete all as specified and as directed.

Making holes for 300mm dia exhaust fan of suitable shape and size into or through brick walls at ground / any (1 to 3) floor including plastering in cement mortar 1:3 for making good to the original surfaces of any description disturbed including painting / distemper matching with the existing colour complete all as specified and as directed. Note: - Rates are deemed to be including charges of any type of T&P, insurance of staff deployed at site.

Supply and fixing exhaust fan, steel body AC single phase 230 Volt of size 300mm sweep with blades and frame and louvers complete with louver shutter including fixing rawl plug / nut and bolts complete all as specified and as directed.

NOTE NO 1: - Samples of materials as approved will be kept in GE's sample room. NOTE NO 2: - All fittings and fixtures mentioned above will be fixed to the satisfaction of Engr-in-Charge and GE. NOTE NO 3: - Warranty certificate to the Engineer-in-Charge where ever applicable shall be submitted by the Contractor at the time of fittings.

bushan kumar

Shri Karshni Builders

Sarbat Construction Co

DARVESH ENGINEERING WORKS

M/S Shesh Paul Gupta

Bidder Name

M/S Shesh Paul Gupta

Shri Karshni Builders

Sarbat Construction Co

kerni electricals

bushan kumar

DARVESH ENGINEERING WORKS