Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.3 LAccepted-AOC F 402 AMBIKA APARTMENT PLOT A 9 SECTOR 20 NERUL W NAVI MUMBAI 400 706 | THANE | MAHARASHTRA | 400706 | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹34.3 L+₹4.0 L (13.1%)Rejected-AOC 1ST FLOOR SIDDHI PUJA BUSINESS SQUARE SONY PAITHANI CHOWK NASHIK MAHARASHTRA INDIA PIN 422 002 | NASHIK | MAHARASHTRA | 422002 | L2 | Rejected-AOC NOT LOWEST | |
| 3 | L3₹34.6 L+₹4.3 L (14.1%)Rejected-AOC | L3 | Rejected-AOC NOT LOWEST | |
| 4 | L4₹35.5 L+₹5.2 L (17.3%)Rejected-AOC UNIT NO 7 MOUNT VIEW CO OP HOUSING SOCIETY LIMITED MUMBAI MANKHURD 400 088 | MUMBAI SUBURBAN | MAHARASHTRA | 400088 | L4 | Rejected-AOC NOT LOWEST | |
| 5 | L5₹41.3 L+₹11.1 L (36.5%)Rejected-AOC TULSI ASTHA FLAT NO 1 PLOT NO 54 SECTOR 12 VASHI NAVI MUMBAI THANE 400 703 | THANE | MAHARASHTRA | 400703 | L5 | Rejected-AOC NOT LOWEST |
Tender Value
₹32.1 L
EMD Value
₹64,200
Closing Date
25 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (NW) MANKHURD
GE (NW) MANKHURD MUMBAI-88
CONSTR OF ADDL BLDG SPACE OF 1000SQFT FOR TECHNICAL ACCN OF TECHNICAL STORE ROOM FOR TOOLS, TECHNICAL DOCU/STORAGE ROOM FOR TEST SAMPLE AND GUAGE ROOM AT P-14 BLDG AT NAD, TROMBAY UNDER GE (NW) MANKHURD
2024_MES_636412_1
8278/E8
Open Tender
Civil Works
Item Rate
180 days
GE (NW) MANKHURD
As per NIT and Tender Documents
9 documents required · 9 mandatory
₹500
GE (NW) MANKHURD
₹64,200
15 Feb 2024
8 Jan 2024
29 Jan 2024
8 Jan 2024
25 Jan 2024
11 Jan 2024
Amount
M & L Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out In Hard/dense soil.completed all as specified
Surface excavation n.exc. 30 cm deep and averaging 15 deep and getting out in soft loose soil.
Excavating in trenches, by mechanical means(hydraulic excavator) n exc 1.5 m wide and n exc 1.5 m in depth; for Plinth Beam & Dwarf Wall, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth for Dwarf Wall and getting out in Hard/dense soil.
Excavating in trenches, n. exc. 1.5 m wide and n. exc. 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in soft loose soil.
Excavation in trenches not exceeding 1.50 m wide and n.exc 1.5 m in depth for foundation of poles, cable etc, not exc 10 sqm on plan and getting out in soft/loose soil including taking out brick protection etc complete all as specified and directed.
M & L for sand cushioning by spreading in trenches crushed sand by gently by punning down manually as in cable protection all as specified and as directed by Engineer -in-charge.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm
Removing excavated material (soil) n exc 50 Mtr and depositing where directed at a level n exc 1.5 Mtr above the starting point.
M & L Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface
M & L Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured)
M & L Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall
M & L Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area
M & L Cement concrete in foundations, filling and mass concrete 1:4:8 using 40 mm graded aggregate as in foundation and paving etc complete all as specified & directed.
M & L for cement concrete 1:3:6 type C-1, using 20mm grade stone aggregate as in coping of stone masonry wall, bed blocks and the like including weathering slightly rounded or chamfered and throating as directed including necessary formwork complete all as specified and directed.
M & L Pre-cast cement concrete block masonry with solid blocks Type C1 1:3:6, exc. 10 cm in width and setting in Cement mortar (1:6) mortar, complete.
M & L Pre-cast cement concrete Type C1 1:3:6 (20mm graded aggregate) block masonry with solid blocks, exc 10 cm in width and setting in cement mortar 1:6, complete all as specified and all as directed.
M & L for providing precast cement concrete type A1 1:1.5:3 (using 20mm graded stone aggregate) in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar 1:6
M & l for plain Cement concrete Type B-1 1:2:4 (using 20 mm graded stone aggregate) as in surface channels and drains finished even and smooth
M & L RCC- M-30 (Design Mix) using 20mm graded aggregate For Footing and plinth beams
M & L RCC- M30 (Design Mix) using 20mm graded aggregate for Column complete all as specified and directed
M & L RCC- M30 (Design Mix) using 20mm graded aggregate for beams and lintels complete all as specified and directed
M & L RCC- M30 (Design Mix) using 20mm graded aggregate for RCC Slab
M & L RCC- M30 (Design Mix) using 20mm graded aggregate for RCC Slab
S & F TMT bars 10mm dia & over of Grade Fe 500 incl cutting, bending, binding & placing in position with binding wirefor footings Slab beams roof slab etc complete al as specified and directed
Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips
Ditto but 5 to 10mm dia in stirrups, spacers & binders.
M & L Form work for rough finished surfaces of concrete measured flat for For Footing
M & L Form work for rough finished surfaces of concrete measured flat for Column,
M & L use & waste Form work for rough finished surfaces of concrete measured flat for Plinth Beam
M & L use & waste Form work for rough finished surfaces of concrete measured flat for RCC beams sides and soffits
M & L use & waste Form work for rough finished surfaces of concrete measured flat for RCC Slab
M & L use & waste Form work for rough finished surfaces of concrete measured flat for RCC chajjas
S& F factory made WPC solid door frames of size 65x100mm complete all as specified .and directed
S& F factory made single extruded WPC solid door shutters decorative type flush door of size 35mm complete all as specified .and directed
S&F extruded aluminum alloy handles (150mm ) fabricated type anodised complete all as specified Make :- Shalimar / jyoti/ Classic/ Ashoka
S&F hinges (150 mm) stainless steel medium weight complete all as specified
S&F aluminum anodised barrel tower bolts (150 mm ) of extruded section complete all as specified
S&F 300 mm Aluminium alloy , anodised , sliding door bolt with hasp, staple (bolt type ) and fixing clips of sheet , cast , exctruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified
Supply and fix aluminium alloy anodised sliding door bolt with hasp and staple(bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolt of extruded section of size 250 mm fixed at any position all as specified and directed.
S & F For powder coated aluminium sections frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified
M&L for Ready mix plaster 10mm thick on faces of bricks or concrete surface including including preparation of wall surfaces etc complete all as specified and directed.
M&L for rendering 5mm thick in ready mix plaster on ceiling surface and finishing the surfaces even and smooth without using extra cement including scrapping down and preparation of ceiling surfaces to receive plaster, scaffolding as reqd etc, complete all as specified and directed.
M&L for Ready mix polimer modified cement based plaster 12mm thick on new bricks or concrete surface including preparation of wall surfaces etc complete all as specified and directed.
Material & Labour for applying Two Coats Of Oil Bound Distemper Over One Coat Of Primer on Internal Wall
Material & Labour for applying Three Coat of White Wash on ceiling
Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additivesM @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.
M & L for hard core of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 10 cm thick watered and rammed to a true surface complete all as specified.
M & L 75 mm thick Cement concrete type D-2 1:4:8 (40mm graded aggregate) as in Sub-Floors, Sub-Bases, Floors and pavings, etc all as specified and as directed.
Screed bed or bedding layer of mortar CM(1:6) 15 mm thick for laying floor finishes
Screed bed or bedding layer of mortar CM(1:3) 10 mm thick
M & L for Coloured Non Skid ceramic tiles 7 to 8mm thick (square/rectangular), area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match
All as per items No 51 above but as in skirting complete all as specified and directed
M & L 10mm Backing Coat In CM (1:4)
M & L 75mm thick Plinth Protection PCC (1:3:6) using 20mm graded aggregate (0.75 m wide).
M & l for 3mm APP based polymeric membrane minimum weighing 3.5 kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid on primed surface by torched application complete and finally finished as per manufacturers instructions
SUPPLY ONLY Water Proofing compound
S&F aluminum anodised grill DG- 202 ( 10 mm x 5.2mm ) of Deco grill or equivalent fixed with 'F' section size not less than 20.60 x 15.20 x 1.5mm thick of approved make all as specified and directed. Note : (i) Make shall be of M/s Decogrille of M/s Associated Groups or equivalent as approved by the GE. (ii) Minimum thickness of anodizing shall be 15 microns.
Supply only 4mm thick sheet figured glass, pin head type and glazing with oil putty in square not exceeding 0.5 Sqm in each pane etc complete all as specified and directed
Supply only stainless steel wire cloth of 0.36 mm nominal dia of wire and average width of aperture 1.40 mm , fixed in aluminium windows complete all as specified and directed.
S&F in Godrej night latch 4 lever for entrance door with fittings complete all as specified and directed
S&F brass powder coated curtain MS rod 25mm etc complete all as specified and directed. Make:Prayag polymers Pvt Ltd or equivalent
S&F 25mm dia fancy type chromium plated MS curtain rod brackets complete all as specified and directed
M & L Rendering 15 mm thick on fair faces of brick work or concrete surfaces using CM 1:4, finished the surface even and smooth all as specified and as directed.
M & l Moorum /red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled and rammed including watering
M & L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in near cement slurry in floors with grey cement and pigments including 20 mm thick Screed bed or bedding layer or mortar layer of mortar for laying floor finishes in CM 1:6
M & L 3 coats of white wash on newly plastered surfaces including Preparing of surfaces on walls
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc.
Material and labour for Plain Cement Concrete (1:3:6) Type C-2 (using 40 mm graded brocken stone aggregate) as in bed to drain pipe including packing under and haunching against the sides of pipes with concrete after they are laid and tested in 450 mm dia pipe complete all as specified and directed.
M & L for RCC NP2 450mm internal diameter laid in trenches and jointed complete all as specified and directed.
M & L for point wiring complete with proper colour coding with 1100 Volts grade, 1.5 Sqmm PVC insulated FRLS, unsheathed, wire confirming to IS-694, Part II, ISI marked with multistranded copper conductor drawn in and including PVC concealed conduit of suitable size of wall/ RCC slab/ ceiling/ colunms/ beams etc with all accessories, fittings, PVC junction boxes etc, including 1.6 mm thick pressed steel terminal boxes concealed in wall covered with laminated sheet top cover 3 mm thick for mounting switches/ sockets/ fan regualtors fixed with cadmium plated machine screws , also including 1.5 Sqmm, PVC insulated, FRLS unsheathed, 1100 Volts multistranded copper conductor green colour as contineous earth wire connected to common earth dolly for one light point/fan/bell point controlled by one way switch, complete all as specified and directed. Note : Rates included for concealed cutting as required at site without any damage and making good in CM 1:4 and matching the surface as required 2 all screws and washer for point wiring shall be Stainless steel. Nothing is extra shall be admisible on this account. Make of conduit :- Sudhakar/ Precision/ Diamond, Make of wire :- Finolex/ Havells/ Polycab/ KEI
-ditto- all as per item No. 70 above but for One 2pin/3 pin socket outlet 5 Amps on same board complete all as specified and directed.
-ditto- all as per item No. 70 above but for One 2 pin/3 pin socket outlet 5 Amps on independent board.
All as per item No. 70 above but wiring complete with 2.5 Sqmm for 3 pin 15A socket multipurpose on independent board
S&F Switch Piano , one way, flush type, 5 Amps, 230 Volts ISI marked complete all as specified and directed. Make : Anchor/ Leader/ Maru/ Havells/ Vinay.
S&F Switch Socket combination 2 in 1 , 5 Amps, flush type, 5 Pin, 230 Volts ISI marked, complete all as specified and directed. Make : Anchor/ Leader/ Maru/ Havells/ Vinay.
S&F Switch Socket combination 2 in 1 , 5/15 Amps, flush type, 6 Pin, 230 Volts ISI marked complete all as specified and directed. Make : Anchor/ Leader/ Maru/ Havells/ Vinay.
S&F ceiling rose three terminal, 230 Volts ISI marked PVC / Polycarbonate body, complete all as specified and directed. Make : Anchor/ Leader/ Maru/ Havells/ Vinay.
S&F fan regulator, electronic stepped (5 step), 230 volts ISI marked, 100 watt, flush type and connecting-up, complete all as specified and directed. Make : Anchor/ Leader/ Maru/ Havells/ Vinay.
Supply & Fix LED betten plastic type fitting of capacity 20W, operating on 230V, 50Hz, AC Supply having luminous efficacy of not less than 100 lumens/watts, CCT 6500K, P.F>0.9, 2.5 KV surge protection, 4-feet long, housing made out of alluminium housing with decorative dual colour end caps elegently designed complete all as specified. Make :-BAJAJ/ JAGUAR/ WIPRO/ CROMPTON.
Supply & Fix LED betten plastic type fitting of capacity 10W, operating on 230V, 50Hz, AC Supply having luminous efficacy of not less than 100 lumens/watts, CCT 6500K, P.F>0.9, 2.5 KV surge protection, 4-feet long, housing made out of Elegant endcaps with housing made from engineering plastic complete all as specified. Make :-BAJAJ/ JAGUAR/ WIPRO/ CROMPTON.
S & F LED light fitting 1X10W Bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make :-BAJAJ/ JAGUAR/ WIPRO/ CROMPTON.
S & F Angular Holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings etc. all as specified and directed.
S & F LED Light Bulb 8/9 watt of white colour, 230 V complete all as specified and directed. Make :-BAJAJ/ JAGUAR/ WIPRO/ CROMPTON.
S & F MCB DB, 12 way, SPN, double door, 240 Volts and including cutting chases in wall, concealing DB in wall, making good the disturbed surfaces and making all connections complete all as specified and directed. Make -Havells/Indoasaian/Legrand/ABB/Schnider Note: Quoted rate shall be deemed to include for provision of copper bus bar of 200 Amps rating.
S & F MCB, SP, 05 to 32 Amps, 240 Volts, 10 KA Breaking capacity, C-series, complete all as specified and directed. Make -Havells/Indoasaian/Legrand/ABB/Schnider
S & F MCB SPN 40 Amps, 240 / 415 Volts, 50 Hz, 10 KA Breaking capacity, C-series, complete all as specified and directed. Make -Havells/Indoasaian/Legrand/ABB/Schnider
Supply & fixing MCCB 4 Pole,415 V, fixed type, 125 Amps with breaking capacity 16 KA including connecting up electrically with proper lugs glands and including all necessary fittings complete all as specified and directed. Make -Havells/Indoasaian/Legrand/ABB/Schnider
S & F MCCB TPN DB, 4 way TPN (vertical type), double door, 415 Volts and including cutting chases in wall, concealing DB in wall, making good the disturbed surfaces and making all connections complete all as specified and directed. Note: Quoted rate shall be deemed to include for provision of copper bus bar of 200 Amps rating. Make -Havells/Indoasaian/Legrand/ABB/Schnider
Supply and fixing SP 63 Amps rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed. Make -Havells/Indoasaian/Legrand/ABB/Schnider
-Ditto- all as per item No 89 above but for SP 40 Amps, 240V, 10KA 'C' curve miniature circuit breaker (MCB) complete all as specified and directed. Make -Havells/Indoasaian/Legrand/ABB/Schnider
Supply and fixing ceiling fans complete with blades, down rods accessories etc operating with electronic regulator on 230 V, 1200 mm sweep. Min air delivery 210 CFM full load wattage 26 to 32 watts, High Speed conforming to IS 374 :2019, colour white BEE 5 star rated with brushless direct current motor (BLDC) without remote complete including taking down old unserviceable fan to MES store all as directed by Engr-in-Charge. Make : BAJAJ (Model : ENERGOS 28) / ORIENT (I FALCON)
Supply and fix in repairs Exhaust fan 300 mm sweep, operating on single phase, 230V, AC, 50 Hz, supply complete made out steel body with louvers, having speed of 1400 rpm, air delivery 6800 CMH, power output of 410W, with double ball bearing confirming to IS : 374 complete all as specified and directed. Make :- ALMONARD / ORIENT/ BAJAJ
M&L for sub main wiring with two single core 1.5 Sqmm PVC insulated FRLS multistranded flexible copper conductor cable 660/1100 volts grade down in through non metalic PVC casing caping with and including PVC insulated 1.5 Sqmm single core single strand copper conductor as continous earth wire in green colour connected to common earth dolly all as specified and as directed. Make - KEI/ Polycab/ Anchor/ FInolex Note : 1. Two runs of cable, one run of earth wire, one run of PVC casing capping will be measured and paid one unit.
Supply & fixing for sub main wiring with two single core 4.0 Sqmm PVC insulated FRLS multistranded flexible copper conductor cable 660/1100 volts grade down in through rigid flexible where applicable non metalic PVC casing caping with and including PVC insulated 4.0 Sqm single core single strand copper conductor as continous earth wire in green colour connected to common earth dolly all as specified and as directed including taking down of old sub main wiring Note : 1. Two runs of Single core cable, one run of earth wire & PVC Cassing Capping will be measured and paid one unit. Make - Havells/ Polycab/ KEI
Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and plasma filter for better indoor air quality with minimum 3 star rating and EER 3.20 of capacity 2 Ton electric driven single phase 230 Volt. Make :- Voltas/ LG/ Blue Star/ Carrier/ Mitsubishi
S&F single pole and neutral enclosure with a two pin and earth and metal clad plug socket complete with one single pole MCB 20 Amp 240 Volts complete all as specified including concealing in wall and directed. Make - Havells/ Crompton/ Legrand
Supply and fix copper tube of size 1/4" bore including brazing etc with rubberised insulation and tape suitable for supply pipes for air conditioners complete all as specified and directed.
Supply and fix copper tube of size 5/8" bore including brazing etc with rubberised insulation and tape suitable for supply pipes for air conditioners complete all as specified and directed.
Supply and fix PVC drain pipe of size 5/8" bore for supply pipes for air conditioners complete all as specified and directed.
Supply and fix 4 core 2.5 sqmm PVC insulated FRLS multistranded flexible copper conductor cable 660/1100 volts grade ISI marked complete all as specified and directed.
Supply and fix Heavy duty Water Proof Powder coated mounting bracket for installation of outdoor unit of air condiioner made out of 2 mm thick high grade steel with suitable fastener, MS nuts, bolts M8 x 45mm, washer, bolt M8 x 30mm nut, bolts & washers etc. duly painted complete set all as specified and directed. Make :- Companion Sleek, Aircool Sales Corporation or equillant make.
Supply and laying un-reinforced precast concrete cable cover class LV, type-I, flat size 250 mm x 150 mm x 40 mm laid in trenches all as specified. Make - Mehtab Tiles / National Tiles
Supply and Laying or fixing or passing through pipe, XLPE/PVC insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 25 Sqmm 3.5 core including necessary connection and providing cable lugs as required all as specified. Make - Polycab/ KEI/ Havells
M&L for cutting existing road/hard, dense soil not exc 45 x 60 cm in wide & depth getting out excavated material for laying GI tube returning filling & well ramming watering finish suraface 10 cm from top using PCC 1:3:6; of not less than 4 inch including removal of surplase soil all as directed
S& F of HDPE type pipe, PN-10, 50 mm dia for laying in ground, road crossing etc for cabe protection including necessary fittings for wall and ducting with required clamps and supports, etc all as directed by Engineer in charge. Make - Sudhakar/ Supreme/ Paryag Note : Required Clamps and supports shall be fixed on wall with distance 1.00 RM as directed by Engr-in-Charge.
S&F in repair/replacement of building Security light fitting 30/35 Watt made up of pressure die cast alluminium body with mid power LED as lighting sources and PC cover having Top opening separate driver compartment with IP66 protection and impact resistance of IK07 including fixing arrangements and taking down old rusted bracket fittings complete all as per directed by Engr- in – charge. Make - Bajaj/ Crompton/ Wipro
S& F in replacement of GI steel tubing medium grade 40 mm dia and length up to 1.5 meter bent to shape of offset angle upto 45degree for fixing of security /street light fittings including MS clamps made of 32mm x5mm flat iron, nuts , bolts, etc all as directed by Engineer in charge
M&L for earthing using galvanised earth lead wire 4.0 mm dia complete with galvanised steel earth plate electode 600mmx600mmx6mm thick buried directly in ground, earth pit not less than 2.25 meters deep below ground level connection to and including GI strip of size 32x6mm to the extend 7.5 mtr as earth lead by means of GI bolts, Nuts etc. with provision of charcoal and salt all as per electrical plate No 3 of SSR Part I including water arrangement with GI Pipe 20 MM dia (medium Grade), earth lead protection pipe 50mm madium grade with bends, elbow etc. from earth plate to test point, excavation and earth work returning, filling, ramming and removing of soil to distance not exc 50mtr, make good to match with existing surface making PCC pit (Earth chamber) having internal size 30cm x 30cm x 30cm and outer size 60cm x 60cm x 60cm with RCC reinforced cover 50mm thick with one lifting handle made of 8mm dia MS bar funnel wie mesh and testing on completion including making test point on wall as per SSR specification all as specified and directed.
M/s Mohd Altaf Hanif Qureshi
H R ENGINEERS
Joy builders
sahajanand const co.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .