REPAIRS TO WOODEN AND STEEL FURNITURE RECANNING AND POLISHING REPAIRS TO CHAIRS DESKS AND SOFA SETS INCLUDING PAINTING UNDER GE I R AND D WEST BANGALORE

Amount

Repairing of Almirah Large Steel with shelves (FD-67 / 1031) including rectifying the dents & bends, straightening of doors, re-aligning hinges and carrying out necessary welding works whatever required to make the almirah serviceable and Preparing the surfaces by removing rust and cleaning with sand paper and applying two coats of synthetic enamel spray painting, olive green / smoke grey colour, both internally and externally (includes legs, shelves etc), complete all as specified and directed.

All as per item No 1.00 but of Almirah Med Steel with shelves (FD-243 /1032).

Taking down old and unserviceable locks and provision of new locks of 6-levers of approved quality to suit the existing for Almirah large / medium steel with shelves (FD-67/1031 & FD-243 / 1032 ), complete all as specified in the drawing and as directed.

Taking down old and unserviceable handle and provision of new chromium plated handle of approved quality to suit the existing for Almirah large / medium steel with shelves (FD-67 / 1031 & FD-243 / 1032), complete all as shown in drawing and all as specified and directed.

Removing old and damaged seat and back of Chair CBA steel with or without arms ( FD-75(M)) and provision of new seat and back of size 450 mm x 410 mm , with frame size of 40 x 25 mm made of second class hardwood, to existing shape and duly canned with 0.40 mm thick and 2 mm wide plastic cane, laid in approved pattern (i.e., Godrej pattern) , the seat shall be fitted to the steel frame with 6 mm dia 75 mm long bolts, nuts and washers,including painting the wooden surfaces and tublar pipe frame, two coats of synthetic enamel paint complete all as specified in the drawing and as directed.

Removing old and damaged arms rest of Chair CBA steel with arms ( FD-75(M) ) and provision of new arm rests made of second class hardwood, to existing shape including painting the wooden surfaces two coats of synthetic enamel paint complete all as specified in the drawing and as directed.

Removal of old and unserviceable fabric and foam from the seat and back of Chair revolving low Back (Trade Pattern) and replacing with new approved quality fabric (cost not less than Rs 350/- Metre) and 50mm thick cushion of 32 density, quality and design, for complete all as specified in the drawing and as directed.

All as per item No 7.00 but of Chair Revolving Medium Back with Arms (TP).

All as per item No 7.00 but of Chair executive revolving High Back (TP).

All as per item No 7.00 but of Chair computer (FD/E6/MAP/01)

Replacing old and damaged hand rest of chair Revolving Low, Medium and High Backs (Trade Pattern) with new hand rest made of polyurethane material to suit the existing size and design, completeall as specified in the drawing and as directed.

Replacing old, damaged and unserviceable hydraulic steel assembly of approved quality to suit the existing size and design of chair revolving/executive low, high and medium backs (Trade Pattern) and chair computer complete all as specified in the drawing and as directed.

Replacing old, damaged base platform with new base platform made of hard PVC of good quality to suit the existing size and design of chair revolving low, high and medium backs (Trade Pattern) and Chair Computer all as specified in the drawing and as directed.

Replacing old, damaged and unserviceable tiling bolt assembly (Base plate) with new tiling service assembly of approved quality to suit the existing size and design of chair revolving low, high and medium backs (Trade Pattern) complete all as specified in the drawing and as directed.

Replacing old, damaged and unserviceable caster wheel 50mm dia from Chairs Revolving all type (Trade Pattern) and Chair computer complete all as specified in the drawing and as directed.

Removing unserviceable plywood from Charpoy GI Pipe with plywood top (FD-220) and supply and fix plywood 12mm thick, 7 ply, BWR grade, commercial face with ISI marked of size 1980mm x 900mm with edges rounded and fixed to charpoy using 8 Nos of 6mm dia, 75mm long bolt and nuts with plate washers, carrying out necessary welding works if required, welding of 2 Nos of MS flat iron 40 mm x 5 mm complete all as specified in the drawing and as directed.

Taking down unserviceable of Legs (Threads wornout) of GI Charpoy and provisioning with suitable 32 mm GI pipe legs complete all as specified in the drawing and as directed.

Taking down unserviceable Angle Elbow of GI Charpoy and provisioning with suitable 32 mm GI Angle Elbow complete all as specified in the drawing and as directed.

Repairs and maintenance of Table office Clerk steel (FD-84(M)/1004) by taking out drawer, greasing drawer channels, refixing the drawer without any damage after painting the entire steel surfaces with two coats of synthetic enamel spray paint (Olive green / smoke grey colour) after preparation of surfaces, including carrying out necessary welding works if required and providing PVC / rubber shoe / bush to legs etc., completeall as specified in the drawing and as directed.

All as per item No 19.00 but of Table Office Officer steel (FD-84(M))

Removing the existing unserviceable table tops of Table office Clerk steel (FD-84(M)/1004) and fixing new table tops with 19mm thick pre-laminated particle board exterior grade, ISI marked with natural teak shade on one side and white shade of approved quality on the other side. Border with 4mm thick teak wood beading all around the top duly french polished all as specified in the drawing and as directed.

All as per item No 21.00 but of Table Office Officer steel (FD-84(M))

All as per item No 3.00 but of Table office Clerk, Table Office Officer steel (FD-84(M)/1004)

Repairs and maintenance of TABLE COMPUTER (FD-E/06/MAP/03) and removing the existing unserviceable Table top of and fixing of new top made out of pre-laminated particle board 18 mm thick, exterior grade with natural teak shade on one side and white shade on the other side of approved quality. Border with 4mm thick teak wood beading all around the top duly french polished all as specified in the drawing and as directed..

Removing the existing unserviceable Bottom shelf of TABLE COMPUTER and fixing shelf made out of pre-laminated particle board 18 mm thick exterior grade with natural teak shade on one side and white shade on the other side of approved quality. Border with 4mm thick teak wood beading all around the shelf duly french polished all as specified in the drawing and as directed.

Removing the existing unserviceable Key board tray of TABLE COMPUTER and fixing new Key board tray made out of pre-laminated particle board 18 mm thick, exterior grade with natural teak shade on one side and white shade of approved quality on the other side. Border with 4mm thick teak wood beading all around the key board duly french polished all as specified in the drawing and as directed.

Removing the existing unserviceable Pull out tray (Mouse tray) of TABLE COMPUTER and fixing new Pull out tray made out of pre-laminated particle board 18 mm thick, exterior grade with natural teak shade on one side and white shade of approved quality on the other side. Border with 4mm thick teak wood beading all around the top duly french polished as specified in the drawing and as directed.

Removing the existing unserviceable drawer of TABLE COMPUTER and fixing new Drawer 75mm deep made of pre-laminated particle board 18 mm thick, exterior grade with natural teak shade on one side and white shade on the other side of approved quality and providing suitable knob for the drawer as specified in the drawing and as directed.

Removing the existing unserviceable Telescopic channels of TABLE COMPUTER and fixing new for key board tray, pull out tray and drawer of suitable size and of approved quality as specified in the drawing and as directed.

Repairing of Rack shoe steel (FD/E6/MAP/02(R)) and Preparing the surfaces by removing rust and cleaning with sand paper and applying two coats of synthetic enamel spray painting, black colour, completeall as specified in the drawing and as directed.

Removing the existing unserviceable top of teapoy verandah MAP (FD/E6/MAP/17) and fixing new top made of pre-laminated particle board 18 mm thick, exterior grade with natural teak shade on one side and white shade on the other side of approved quality. Border with 4mm thick teak wood beading all around the top duly french polished as specified in the drawing and as directed.

Repairing of teapoy verandah MAP (FD/E6/MAP/17) and preparing the surfaces by removing rust and cleaning with sand paper and applying two coats of synthetic enamel spray painting, black colour, complete all as specified in the drawing and as directed.

Renewal of top of table bed side (FD/E6/Map/15 (R) with prelaminated particle board of size 450x450mm 19 mm thick, BWR type, exterior grade, of natural teak finish with 4 mm thick teak wood edging alround all as specified in the drawing and as directed.

Renewal of upper drawer of table bed side (FD/E6/Map/15 (R) of size 450x100x19 with prelaminated particle board, BWR type, exterior grade, of natural teak finish with 4 mm thick teak wood edging alround all as specified in the drawing and as directed.

Renewal of bottom drawer of table bed side (FD/E6/Map/15 (R)) of size 450x350x19 with prelaminated particle board, BWR type, exterior grade, of natural teak finish with 4 mm thick teak wood edging alround all as shown on drawings.

Renewal of Handle for drawer of table bed side (FD/E6/Map/15 (R)) with handle 100mm chromium plated and all as specified in the drawing and as directed.

Renewal of top of Table 3 'x 2' steel with drawer (FD-1008) with pre-laminated particle board 18 mm thick, exterior grade with natural teak shade on one side and white shade on the other side of approved quality. Border with 4mm thick teak wood beading all around the top duly french polished as specified in the drawing and as directed.

Repair and maintenance of Bed plywood top (FD-246) and renewal of plywood top with Plywood 12mm thick BWR quality, IS grade of size 1860mm x 900mm including fixing of 4 Nos MS Clamp 6mm thick of suitable size between horizontal members and legs all as specified in the drawing and as directed.

Renewal of Head board of Bed plywood top with both sides teak veneered plywood and teak wood lipping 4mm alround of size 900mm x 450mm all as specified in the drawing and as directed.

Renewal of Foot board of Bed plywood top with both sides teak veneered plywood and teak wood lipping 4mm alround of size 900mm x 300mm all as specified in the drawing and as directed.

Renewal of bottom stiffeners of Bed plywood top (FD-246) with 1st Class Hardwood all as specified in the drawing and as directed.

Renewal of teakwood arms of Chair Writing (FD-20/250/280) all as specified in the drawing and as directed.

Renewal of teakwood stiffeners of Chair Writing Chair Writing (FD-20/250/280) all as specified in the drawing and as directed.

Renewal of teakwood front legs of Chair Writing Chair Writing (FD-20/250/280) all as specified in the drawing and as directed.

Renewal of teakwood rear legs of Chair Writing Chair Writing (FD-20/250/280) all as specified in the drawing and as directed.

Renewal of teakwood rails (front, back & sides) of Chair Writing Chair Writing (FD-20/250/280) all as specified in the drawing and as directed.

Renewal of teakwood front legs of Chair Dining (FD-228/279) all as specified in the drawing and as directed.

Renewal of teakwood rear legs of Chair Dining (FD-228/279)) all as specified in the drawing and as directed.

Renewal of teakwood rails (front, back & sides) of Chair Dining (FD-228/279) all as specified in the drawing and as directed.

Renewal of teakwood stiffeners of Chair Dining (FD-228/279) all as specified in the drawing and as directed.

Repair of Chair Dining Officers (FD/E6/MAP/10, FD/E6/MAP/16, FD/MAP-II/04) and removal of old unserviceable fabric and cushion and providing new fabric of approved quality, design and colour costing not less than Rs.350 per metre with cushion 75 mm thick 32 density provied to the existing shape complete all as specified in the drawing and as directed.

Renewal of teakwood front legs of Chair dining Officers all as specified in the drawing and as directed.

Renewal of teakwood rear legs of Chair dining Officers all as specified in the drawing and as directed.

Renewal of teakwood rails (front, back & sides) of Chair dining Officers all as specified in the drawing and as directed.

Renewal of teakwood bottom stiffeners of Chair dining Officers all as specified in the drawing and as directed.

Renewal of teakwood back stiffeners of Chair dining Officers and all as specified in the drawing and as directed.

Renewal of teakwood rails (front, back & sides) of Chair Easy (FD-229/17(M)) all as specified in the drawing and as directed.

Renewal of teakwood front legs of Chair Easy (FD-229/17(M)) all as specified in the drawing and as directed.

Renewal of teakwood rear legs of Chair Easy (FD-229/17(M)) all as specified in the drawing and as directed.

Renewal of teakwood arms of Chair Easy (FD-229/17(M)) all as specified in the drawing and as directed.

Removal of old and unserviceable fabric/Rexene and rubber foam etc., of Sofa Set Five Seater (Trade Pattern) and providing new fabric/Rexene of approved quality, design and colour costing not less than Rs 380 per metre (approx. area 8 sqm), stitched to existing shape and design with 20 mm thick foam to arm rest and 100 mm thick PU foam of 40 density to rest of the areas, underneath of seat covered with approved black cloth and and carrying out necessary repair works if required and polishing the wooden parts with french polish complete all as specified in the drawing and as directed.

Removal of old and unserviceable foam cushion with cover from seat and back of Sofa set 5 Seater (FD 373/281) and providing new foam cushion of size 550 x 530 x 100 mm , 40 Kg/cum density ,covered with tapestry cloth of best quality and colour costing not less than Rs. 350 per metre, with zips of size 560mm long matching with colour of cloth complete all as specified in the drawing and as directed. Note:- Set of 10 Nos. i.e 5 nos seat and 5 nos back will be measured as one set.

Repair and maintenance of Side board (FD-26(M)/241) and renewal of top of with pre-laminated particle board 18 mm thick, exterior grade with natural teak shade on one side and white shade on the other side of approved quality . Border with 4mm thick teak wood beading all around all as specified in the drawing and as directed.

Renewal of Door shutter of Side board (FD-26(M)/241) in two parts of size 655mm x 835mm made out of pre-laminated particle board 18 mm thick, exterior grade with natural teak shade on one side and white shade on the other side of approved quality . Border with 4mm thick teak wood beading all around including piano hinges, knobs etc all as specified in the drawing and as directed.. Note:- Double leaf shutter will be measured as single unit.

Renewal of Side portion of Side board (FD-26(M)/241) with pre-laminated particle board of size 455mm x 625mm 18 mm thick, exterior grade with natural teak shade on one side and white shade of approved quality on the other side. Border with 4mm thick teak wood beading all around all as specified in the drawing and as directed..

Renewal of Back side of Side board (FD-26(M)/241) with plywood of size 625mm x 1100mm using 6mm commercial plywood.

Renewal of Leg with Frame of Side board (FD-26(M)/241) of size 1050mm x 360mm with teak wood scantling of size 25mm x 45mm alround with legs four Nos made out of teak wood of size 45mm x 45mm x 125mm on top and 25mm x 25mm x 125mm at bottom all as specified in the drawing and as directed..

Renewal of drawers of Side board (FD-26(M)/241) with new Drawer alongwith with chromium plated knobs complete all as specified in the drawing and as directed.

Repair and maintenance of Table Dining 8 persons (FD-239/273) and renewal of top of Table Dining 8 persons (FD-239/273) with prelaminated particle board, 19 mm thick, BWR type, exterior grade, of natural teak finish with 4 mm thick teak wood edging alround all as specified in the drawing and as directed.

All as per item No 69.00 but of Table Dining 6 persons (FD-239/273)

Renewal of teakwood legs of Table Dining 6 to 8 persons (FD-239/273) all as specified in the drawing and as directed.

Renewal of teakwood side rails of Table Dining 6 to 8 persons (FD-239/273) all as specified in the drawing and as directed.

Renewal of teakwood front / back rails of Table Dining 6 to 8 persons (FD-239/273) all as specified in the drawing and as directed.

Repair and maintenance of Table Dining 4 persons (FD-88) and renewal of top of with prelaminated particle board, 19 mm thick, BWR type, exterior grade, of natural teak finish with 4 mm thick teak wood edging alround all as specified in the drawing and as directed.

Renewal of teakwood legs of Table Dining 4 persons (FD-88) all as shown on drawings.

Renewal of teakwood rails of Table Dining 4 persons (FD-88) all as specified in the drawing and as directed.

Renewal of broken mirror of Table dressing gents with mirror (FD 230) with new mirror of size 760 mm x 380 mm, 5 mm thick sheet glass duly electro-copper plated and polished, complete all as specified in the drawing and as directed.

Renewal of unserviceable broken back side ply of Table dressing gents with mirror (FD 230) with new back side ply of size 760 mm x 380 mm made of 6mm thick plywood, commercial type, complete all as specified in the drawing and as directed.

Renewal of unserviceable broken drawer of Table dressing gents with mirror (FD 230) with new drawer of size 290 mm x 130 mm made of 12 mm thick prelaminated particle board with teak finish lamination on one side and the other side balancing white lamination, exterior grade, ISI marked, duly providing 20 mm dia powder coated aluminium knob , complete all as specified in the drawing and as directed.

Removing unserviceable broken top/Bottom of Table dressing gents with mirror (FD 230) and provision of new top of size 900 mm x 300 mm made of 12 mm thick prelaminated particle board with teak finish lamination on one side and the other side balancing white lamination, exterior grade, ISI marked, duly fixed with 4 mm thick teak wood edging, complete all as specified in the drawing and as directed.

Renewal of unserviceable broken back board of Table dressing gents with mirror (FD 230) with new back board of size 900 mm x 120 mm made of 12 mm thick particle board, commercial type, exterior grade, ISI marked, duly fixed with 4 mm thick teak wood edging, completeall as specified in the drawing and as directed.

Renewal of unserviceable and broken mirror of Table dressing ladies with mirror (FD 251) with new mirror of size 1220 mm x 366 mm, 5 mm thick sheet glass duly electro-copper plated and polished, completeall as specified in the drawing and as directed.

Renewal of unserviceable broken top/Bottom of Table dressing ladies with mirror (FD 251) with new top of size 900 mm x 380 mm made of pre-laminated particle board 18 mm thick, exterior grade, ISI marked, with natural teak shade on one side and white shade on the other side of approved quality, duly fixed with 4 mm thick teak wood edging, completeall as specified in the drawing and as directed.

Removing unserviceable broken back side ply of Table dressing ladies with mirror (FD 251) and provision of new back side ply of size 1220 mm x 366 mm made of 6 mm thick plywood, commercial type, complete all as specified in the drawing and as directed.

Removing the unserviceable and broken glass shutter complete with alround aluminium double channel of Table dressing ladies with mirror (FD 251) and provision of new glass shutter with aluminium double channel, complete all as specified in the drawing and as directed.

Removing unserviceable broken back board of Table dressing ladies with mirror (FD 251) and provision of new back board of size 900 mm x 380 mm made of 12 mm thick particle board, commercial type, exterior grade, ISI marked, duly fixed with 4 mm thick teak wood edging, complete all as shown in drawing and all as specified and directed.

Removing unserviceable broken drawer of Table dressing ladies with mirror (FD 251) and provision of new drawer of size 290 mm x 130 mm made of pre-laminated particle board 18 mm thick, exterior grade, ISI marked, with natural teak shade on one side and white shade on the other side of approved quality, duly providing 20 mm dia powder coated aluminium knob , complete all as specified in the drawing and as directed.

Repair of Table centre (FD-29(M)/235/274) and renewal of top with prelaminated particle board, 19 mm thick, BWR type, exterior grade, of natural teak finish with 4 mm thick teak wood edging alround all as specified in the drawing and as directed.

Renewal of teakwood side rails of Table centre (FD-29(M)/235/274) all as specified in the drawing and as directed.

Renewal of teakwood legs of Table centre (FD-29(M)/235/274)all as specified in the drawing and as directed.

Renewal of teakwood front / back rails of Table centre (FD-29(M)/235/274) all as specified in the drawing and as directed.

Renewal of top of Table 900 x 600 mm with or without drawers (FD-231/284/41/224) with prelaminated particle board, 19 mm thick, BWR type, exterior grade, of natural teak finish with 4 mm thick teak wood edging alround all as shown on drawings.

Renewal of teakwood legs of Table 900 x 600 mm with or without drawers (FD-231/ 284/41/224)all as specified in the drawing and as directed.

Renewal of teakwood side rails of Table 900 x 600 mm with or without drawers (FD-231/ 284/41/224) all as specified in the drawing and as directed.

Renewal of teakwood horizontal/vertical stiffeners of Table 900 x 600 mm with or without drawers (FD-231/ 284/41/224) all as specified in the drawing and as directed.

Renewal of Front drawer of Table 900 x 600 mm with drawers (FD-231/ 284/41/224) with 12 mm thick commercial plywood and laminated with 1 mm thick decolam sheet (natural teak finish) on front exposed side of the drawer and fixing of drawer knobs, 40 mm round, chromium plated or brass coated, natural teak colour all as specified in the drawing and as directed.

Repair of Peg Table (FD-236/25(M)/277) and renewal of top of with prelaminated particle board, 19 mm thick, BWR type, exterior grade, of natural teak finish with 4 mm thick teak wood edging alround all as specified in the drawing and as directed.

Renewal of teakwood front / back rails of Peg Table (FD-236/25(M)/277) all as specified in the drawing and as directed.

Renewal of teakwood side rails of Peg Table (FD-236/25(M)/277) all as specified in the drawing and as directed.

Renewal of teakwood legs of Peg Table (FD-236/25(M)/277) all as specified in the drawing and as directed.

Repair of TABLE BED SIDE (FD-276) and renewal of top of with prelaminated particle board of size 450mm x 230mm, 19 mm thick, BWR type, exterior grade, of natural teak finish with 4 mm thick teak wood edging alround all as specified in the drawing and as directed.

Renewal of side of TABLE BED SIDE (FD-276) with prelaminated particle board of size 230mm x 510mm,18mm thick, BWR type, exterior grade, of natural teak finish with 4 mm thick teak wood edging alround all as specified in the drawing and as directed.

Renewal of back side of TABLE BED SIDE (FD-276) with plywood 6mm thick commercial of size 450mm x 410m all as specified in the drawing and as directed.

Renewal of shelf of TABLE BED SIDE (FD-276) with 12mm thick prelaminated particle board of size 450mm x 230mm with natural teak shade on one side and white shade on the other side along with 4mm thick teak wood beading on the front side all as specified in the drawing and as directed.

Repair of Table writing (FD-249/275) and renewal of top of top with prelaminated particle board, 19 mm thick, BWR type, exterior grade, of natural teak finish with 4 mm thick teak wood edging alround all as specified in the drawing and as directed.

Renewal of Front drawer of Table writing (FD-249/275) with 12 mm thick commercial plywood and laminated with 1mm thick decolam sheet (natural teak finish) on front exposed side of the drawer and fixing drawer knobs, 40 mm round, chromium plated or brass coated, natural teak colour all as specified in the drawing and as directed.

Renewal of legs of Table writing (FD-249/275) with teakwood of size 55mm x 35mm x 760mm long all as specified in the drawing and as directed.

Renewal of horizontal stiffeners of Table writing (FD-249/275) with teakwood of size 50mm x 25mm x 1145mm all as specified in the drawing and as directed.

Renewal of bottom shutters of Table writing (FD-249/275) with prelaminated particle board of size 370mm x 470mm , 18 mm thick, exterior grade, of natural teak finish with 4 mm thick teak wood edging alround all as specified in the drawing and as directed.

Renewal of back side of Table writing (FD-249/275) with plywood 6mm thick commercial grade of size 410mm x 610mm all as specified in the drawing and as directed.

Repair of Teapoy (FD-278) and renewal of top of with prelaminated particle board, 19 mm thick, BWR type, exterior grade, of natural teak finish with 4 mm thick teak wood edging alround all as specified in the drawing and as directed.

Renewal of side rails of Teapoy (FD-278) with teakwood of size all as specified in the drawing and as directed.

Renewal of front / back rails of Teapoy (FD-278) with teakwood of size all as specified in the drawing and as directed.

Renewal of legs of Teapoy (FD-278) with teakwood of size all as specified in the drawing and as directed.

Preparation of old wooden surfaces of Bed plywood top (FD-246) with suitable abrasive paper, removing dust, dirt, filling the chipped and loose holes with bees wax, including cleaning / scrapping off, carrying out necessary repair works, providing with suitable nylone buffers for the legs and applying French polish two or more coats (till the desired finish quality is achieved), complete all as specified in the drawing and as directed.

All as per item No 115.00 but of Chair Writing (FD 20, 280)

All as per item No 115.00 but of Chair Dining FD-16,279)

All as per item No 115.00 but of Chair Dining Officers (FD/E6/MAP/10, FD/E6/MAP/16, FD/MAP-II/04)

All as per item No 115.00 but of Chair Easy (FD 229)

All as per item No 115.00 but of Sofa set 5 seater (FD 373/281)

All as per item No 115.00 but of Side board (FD-26(M)/241)

All as per item No 115.00 but of Table dining 8 person (FD-239/273)

All as per item No 115.00 Table dining 6 person (FD-239/273)

All as per item No 115.00 but of Table dining 4 person (FD-88)

All as per item No 115.00 but of Table dressing gents with mirror (FD-230)

All as per item No 115.00 but of Table dressing ladies with mirror (FD-251/378)

All as per item No 115.00 but of Table centre (FD-29(M)/235/274)

All as per item No 115.00 but of Table 900x600 w/o drawer (FD-284)

All as per item No 115.00 but of Table 900x600 with drawer (FD-41/224)

All as per item No 115.00 but of Peg Table (FD-25(M)/236/277)

All as per item No 115.00 but of Table bed side (FD-28/276)

All as per item No 115.00 but of Table writing FD 275/249

All as per item No 115.00 but of Teapoy (FD-278)

Removing the unserviceable cane plastic from vartious types of CHAIRS (FD 20/280/16/279/229) cleaning the rebated portion and smoothening with emery paper, carrying out necessary repair works and re-caning with plastic cane, white colour, 0.40 mm thick and 1.80 mm width for weaving and 2.80 mm width for borders, of approved make, completeall as specified in the drawing and as directed.

Removing existing unserviceable plastic cane from Chair verandah and preparing the surfaces with abrasive (emery) paper, re-caning with plastic cane, 0.40 mm thick and 3.80 mm width, of approved make and quality, including painting the frame with two coats of synthetic enamel paint white colour and providing PVC/ rubber shoe / bush to legs etc complete all as specified in the drawing and as directed.

Fixing of 'L' Clamp 4mm thick made of made of GI / MS of suitable with wood screws size between horizontal members and legs of various types of wooden chairs, teapoy, table centre, table 900mm x 600mm with or without drawer etc all as specified and as directed by the engineer-in-charge.

Fixing of 'L' Clamp 6mm thick made of made of GI /MS of suitable size with wood screws between horizontal members and legs of sofa set 5 seater (FD-281/373), Table dining 6 to 8 person (FD-239/273), Table dinming 4 person (FD-88), Table writing (FD-249/275) etc all as specified and as directed by the engineer-in-charge.

REENA INDUSTRIES (BID ID -3499683)

OM ENTERPRISES (BID ID -3503450)

Budget Furniture Industries (BID ID -3494657)