Diversion of 11kV Overhead line near III and IV Bhubaneswari Siding and near Overbridge next to the Jagannath Area GM Office of Ananta OCP

Amount

Dismantling of overhead lines comprising of copper/aluminium over head conductor, G.I wire, cross arms, insulators etc as required.

Dismantling of pole/street light standard/strut embedded in cement concrete foundation etc. as required.

Erection of steel tubular or rail pole strut in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling and secured with holding clamps, bolts, nuts, etc. as required.

Supplying and erection of stay set complete (galvanised) with 19/20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, turn buckle ( 20 mm X 60 cm ), 7/ 3.15 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required.

Supplying and erection of a set of three 11 KV disc insulator for 33 KV over head lines with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, bolts, nuts, washers etc. as required.

Erection of ACSR conductor of 7/2.11 mm to 7/3.00 mm diameter including binding etc. as required.

Erection of G.I Wire, 8 SWG including binding etc. as required.

Supplying and erection of 33 KV pin insulator complete with large steel head G.I. pin, nuts, washers etc. as required.

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for two 11 KV over head line conductors complete with 50 mm X 50 mm X 6 mm (angle iron bracket welded to the channel iron and complete with 50 mm X 6mm M.S. flat iron clamps, bolts and nuts including drilling holes for insulator pins, bolts, nuts and washers etc (as per drawing) and painting with primer and finish paint as required.

Supplying of 50 mm X 8 mm M.S. flat iron pole top bracket/ cross arm for single 11/22/33 KV over head line conductor complete with fixing clamps, bolts, nuts and washers drilling holes for insulator pins, bolts and nuts etc and painting with primer and finish paint as required.

Erection of pole top/ straight two wire/ V shape two wire, angle iron/ channel iron, cross arm on steel tubular/ rail/ PCC pole for 11/22/33 KV as required.

Supplying of two lengths of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) double pole cross arm for three wire 11KV over head line conductors complete with through bolts and nuts for clamping to the poles, 50 mm X 6 mm M.S. flats welded on one side to the channel iron and with bolts and nuts on the other side for tying the cross arms together, including drilling holes for insulator pins/ fittings, bolts, nuts and washers etc (as per drawing) and painting with primer and finish paint as required .

Supplying and erection of a set of cross bracing frame work for 11 KV over head line double pole structure having four members fabricated out of 50 mm X 50 mm X 6 mm angle iron to form a rectangle of minimum size 1400 mm width X 2500 mm height , complete with 50 mm X 6mm M.S. flat iron clamps, bolts and nuts including drilling holes for insulator pins, bolts and nuts etc (as per drawing) and painting with primer and finish paint as required .

Erection of cradle guard as required.

Clamps, bolts, nuts etc.

Supply of G.I wire 6 SWG

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required: 120 sq. Mm

Supplying and erection of three piece nonlinear resistor type lightning arrestor suitable for 3 wire, 11 KV overhead lines with rated voltage 9 KV (rms) with a nominal discharge current rating of 5 KA and complete with galvanised clamping arrangement, G.I. bolts, nuts, washers etc. as required.

Providing and fixing H.T. danger notice plate of 250 mm X 200 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade `of following size in the existing RCC/ HUME/ METAL pipe as required. Upto 120 sq. Mm

Excavation of the cable trenches in hard rock not exceeding 1.5 metres in width, and lift upto 1.5 metres, including getting out the excavated soil and disposal of excavated soil as directed within a lead of 50 metres.

Excavation for cable trenches in soft soil, depth upto 1.2 m including dressing of sides lift upto 1.5 m, including getting out the excavated soil, refilling with sand and or good soil after laying of cable/ pipe etc in layers of 20 cm, ramming, watering and disposal of surplus excavated soil as directed, within a lead of 50 metres.

Providing and laying in position cement concrete 1:3:6 (1 cement : 2 coarse sand : 6 graded stone aggregate 40 mm nominal size) in foundation of pump, DG set etc including form work etc as required.

Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required 150 mm dia

Supplying and fixing of light class G.I. pipe of 100 mm |dia. (nominal) 3 metres length along the pole for protection of under ground cable as required.

Trimming / cutting of tree branches with 4 person including cutting accessory.

Installation ,Laying and commissioning of 3-Core, 1 1 KV grade 120 samm XLPE cable with Horizontal Directional Drilling(HDD) method by providing 160mm HDPE pipe (PE-80, PN-8) pipe casing including jointing of HDPE Pipe, pit making for machine placement etc.(At a depth of 4 mtr below ground ) (Excluding of pipe)

Supply of 160 mm dia HDPE Pipe, (PE-80, PN-8) ISI marked and as per relevant IS specification

Supply Of 3C X 120 Sq mm 11 kV (UE) XLPE Cable With Stranded Compact Circular Aluminium Conductor, Conductor Screen With Extruded Semi Conducting Compound, Xlpe Insulated, Insulation Screening With extruded Semi Conducting Compound In Combination (Quotation VWith Copper Tape, Cores Laid Up, Extruded Innersheath Of Pvc, Galvanised Steel Round Wire Armoured, And Overall Pvc Sheathed Cable Conforming To Is 7098 (Part-2) 2011, Including All Test Reports With Upto Date Amendments.

Supplying and erection of channel iron 75 mm X 40 mm X6 mm (7.14 kg per metre) 11.18 MTR at pole/structure for installation of one nos GOAB Switch with necessary arrangement.

Fixing of 11 KV 630 Amp double break flat type GOAB switch (horizontal) complete set with nuts bolt, drill holes, gas cutting & necessary arrangement.

Supply of 11 kV horizontal type GOAB switch 630 Amp, 11 kV X 3 post insulator per phase with all acessories as required.

Total impact of GST plus Labour Cess [@ 1 % (BOCW Cess to be deducted from the RA bill as per the value of the work progress)] for the purpose of CTC

M/S B.K ENTERPRISES

M/S. PHASE AND CONTROL

SIVA SHEKHAR SAHOO