Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.7 LAccepted-AOC 60 4 MOTILAL GUPTA ROAD KOL 700008 | KOLKATA | WEST BENGAL | 700008 | L1 | Accepted-AOC Being lowest bidder and reasonable | |
| 2 | L2₹46.3 L+₹83,727 (1.84%)Rejected-Finance 0 KALIKAPUR KALIKA PUR CHAMPAHATI SOUTH 24 PARGANAS WEST BENGAL 743330 | 24 PARAGANAS SOUTH | WEST BENGAL | 743330 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹49.0 L+₹3.5 L (7.70%)Rejected-Finance 165 UTTAR KASTODANGA ROAD KOLKATA 700 061 | KOLKATA | KOLKATA | WEST BENGAL | 700061 | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹49.9 L+₹4.5 L (9.79%)Rejected-Finance P 45 KHIRODE VIDYA BINOD AVENUE KOLKATA 700003 | KOLKATA | WEST BENGAL | 700003 | L4 | Rejected-Finance Other than lowest |
Tender Value
₹42 L
EMD Value
₹84,000
Closing Date
22 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (FW) Kolkata
D9 Commissariat Road Hastings Kolkata 700022
REPAIR MAINT OF OTM ACCN OF ZONE-I AREA INCL MISC B R WORKS AT OUTSIDE FORT WILLIAM UNDER GE(FW) KOLKATA
2022_MES_534036_2
8869/FW/E8
Open Tender
Civil Works
Item Rate
240 days
GE(FW) Kolkata
Ref tender documents
7 documents required · 7 mandatory
₹500
GE (FW) Kolkata
₹84,000
19 Oct 2022
8 Sept 2022
23 Sept 2022
8 Sept 2022
22 Sept 2022
8 Sept 2022
Amount
Taking down cement plaster on brick or concrete surfaces incl racking out joints, hacking for key, scrubbing down with water etc. all as specified and directed.
Removal of existing water proof treatment of any description from roof surface including cement plaster/screed bed carefully from the surfaces, roughening concrete surfaces and cleaning the roof surfaces by brushing, sweeping and scrubbing down with water and removal of debris complete all as specified and as directed.
Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 cm thick below or above GL complete all as specified and directed.
Dismantling of floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing tiles from site and rubbish off the premises complete all as specified and directed.
Dismantling stone slabs and tiles, laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and directed.
Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches, pillars etc complete all as specified and directed.
Taking down chowkhats or frames with shutters (w/o taking off shutters from the frames) area not exceeding 1.5 sqm each and removing from the site complete all as specified and directed.
Taking down chowkhats or frames with shutters (w/o taking off shutters from the frames) area exceeding 1.5 sqm and not exceeding 4 sqm each and removing from the site complete all as specified and directed.
Taking down PVC door shutter with PVC chowkats including all fittings area exc 1.00 Sqm but n.exc 2.00 Sqm complete all as specified and directed.
Taking down unserviceable steel windows/ ventilators, of any size incl grill/guard bars and removing from site complete all as specified and directed.
Taking down shutters of any description area exceeding 1.00 sqm and not exceeding 2.00 Sqm each and removing from the site complete all as specified and directed.
Taking down shutters any description exc 1.0 but not exc. 2.0 sqm each and refixing in the same opening after necessary repair like easing etc complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
Dismantling of plain or corrugated steel sheeting any gauge or any thickness in roof covering including stacking serviceable materials of re-use and removing unserviceable materials complete all as specified and directed.
Dismantling of Asbestos cement corrugated, semi-corrugated sheet in roof covering complete all as a specified and as directed
M&L for applying one coat of acrylic distemper with rollers to old decorated surfaces of wall including preparation of surface complete all as specified and directed.
M&L for applying one coat of acrylic distemper to old decorated surfaces of ceiling including preparation of surface complete all as specified and directed.
M&L Preparing old decorated plastered surfaces of walls and applying One Coat of Plastic/Acrylic Emulsion Paint with rollers over 10 cm width or girth , complete all as specified and as directed.
M&L Preparing old decorated plastered surfaces of ceilings and applying One Coat of Plastic/Acrylic Emulsion Paint with rollers over 10 cm width or girth , complete all as specified and as directed.
M&L for applying one coat of synthetic enamel paint to old painted steel surfaces of any description not exceeding 10 cm width or girth including preparation of surfaces complete all as specified and directed.
M&L for applying one coat of synthetic enamel paint to old painted steel surfaces of any description over 10 cm width or girth including preparation of surfaces complete all as specified and directed.
M&L for applying one coat of synthetic enamel paint to old painted wooden surfaces of any description over 10 cm width or girth including preparation of surfaces complete all as specified and directed.
M&L for preparation of old decorated wall surfaces and applying one coat of cement base paint with brush complete all as specified and directed.
M&L for preparation of new surfaces of walls and soffit of chajja, roof slab etc., by cleaning, brooming, rubbing and scrapping as required using broom, emery paper, putty blade/scraper as applicable to make the surface free from protrutions, loose particles, dust etc including necessary safety & protective measures such as safety belt, headgear etc, finishing the surface with 2 mm thick exterior wall putty (in two layers) for smooth finish and finishing with two coats of weather proof exterior emulsion paint over a coat of suitable exterior primer of approved make using airless spray technology capable of operating single spray gun with hose of adequate length and necessary scaffolding for upto 4 storey building height complete all as specified and directed.
M&L for complete removal of existing treatment on old painted surfaces of walls and soffit of chajja, roof slab etc. by scrapping and removing treated surfaces with mechanical wall sander (having vacuum mechanism for suction) having minimum 1500 RPM, sanding pad of 80 grit size having 7"- 9" dia (as required) including cleaning, watering to make the surface clean and free from dust, for upto 4 storey building height including necessary scaffolding, safety and protective measures complete all as specified and directed.
M&L for complete removal of existing treatment on old painted surfaces of walls and soffit of chajja, roof slab etc. by using high pressure jet washer including cleaning the surface by scrapping as required using emery paper, putty blade/scraper as applicable for removing loose paint, corrosion, algae formation etc., to make the surface clean and free from dust, for upto 4 storey height including necessary scaffolding, safety and protective measures complete all as specified and directed.
M&L for applying 2mm thick wall care putty (in two layers) on old cleaned surfaces of walls, soffits of chajja, roof slab etc, for smooth finish and finishing with two coats of weather proof exterior emulsion paint over a coat of suitable exterior primer of approved make using airless spray technology capable of operating single spray gun with hose of adequate length for upto 4 storey building height including necessary scaffolding, safety and protective measures complete all as specified and directed.
M&L for preparation of old treated/painted surfaces of walls and soffit of chajja, roof slab etc., by cleaning, brooming, rubbing and scrapping as required using broom, emery paper, putty blade/scraper as applicable to make the surface free from loose paint, algae formation, dust etc including necessary safety & protective measures such as safety belt, headgear etc including filling cracks upto 5mm with and including suitable elastomeric crackfill paste and applying one coat of weather proof exterior emulsion paint of approved make using airless spray technology capable of operating single spray gun with hose of adequate length and necessary scaffolding for upto 4 storey building height complete all as specified and directed.
M&L for brick work using old size fly-ash bricks straight or curved on plan exec 6 metre mean radius, built in cement mortar 1:6 including necessary scaffolding complete all as specified and directed.
M&L for brick work using old size fly-ash bricks straight or curved on plan to any radius in half brick wall, built in cement mortar 1:4 complete all as specified and directed.
S&F in repair 15mm bore galvanised steel tubing (medium grade) with all fittings and fixed to walls and ceiling or laid in floors incl necessary scaffolding complete all as specified and directed.
-ditto all as per item No 33 here-in-before but 20 mm bore
-ditto all as per item No 33 here-in-before but 25 mm bore
Taking down and re-fixing old steel tubing 15mm bore and connection in new or old position(wall, ceiling, floor etc.) after properly cleaning incl necessary scaffolding complete all as specified and directed.
-ditto all as per item No 36 here-in-before but 20 mm bore
-ditto all as per item No 36 here-in-before but 25 mm bore
S&F in repair Chromium plated brass Pillar tap, fancy type. with areator, fixed to wash hand basin, complete all as specified and directed. (Make : ESS ESS, Cat No: RO-101 / PRAYAG, Cat No: 6702 / Essco, Cat No: SQT-507KN / SOMANY, Model: ETHER)
S&F in repair swan neck pillar cock 15mm dia chromium plated cast copper alloy with round spout left hand knob operating screwed for iron pipe etc complete all as directed (MAKE : ESSCO, Cat No : MQT-510AKN / ESS ESS, Cat No: T-113B / PRAYAG, Cat No: 6414 / SOMANY, Model: ETHER)
S&F in repair Chromium plated brass Bib cock with wall flange, fancy type, fixed to 15 mm bore of Iron pipe complete all as specified and directed. (Make : Ess Ess, Cat No: RB-103 / PRAYAG, Cat No: 6706 / Essco, Cat No: SQT-512KN / / /SOMANY, Model: ETHER)
S&F in repair 15mm bore chromium plated two way bib cock with flange, fancy type complete all as specified and as directed. (Make : Ess Ess, Cat No: RO-103A / PRAYAG, Cat No: 6712 / Essco, Cat No: SQT-512ANKN /SOMANY, Model: ETHER)
S&F in repair chromium plated brass over head shower rose with arm, with 3 flow, fixed to 15mm bore of iron pipe complete all as specified and directed. (Make : Essco, Cat No: ALE-536A & EOS-542N / ESS ESS, Cat No: SA-101 & OH-202 / PRAYAG, Cat No: BS-73 / SOMANY, Model: ETHER)
S&F in repair 15mm bore chromium plated central hole basin mixer without popup waste system with 450mm long copper pipe and brass nut, complete all as specified and directed. (MAKE : Ess Ess, Cat No: RO-118 / PRAYAG, Cat No: 6750 / Essco, Cat No: SQT-516KN /SOMANY, Model: ETHER)
S&F in repair, 15 mm bore fancy type stop valves, cast copper alloy, chromium plated (concealed type), screwed down, high pressure, with crutch or butterfly handle, incl concealed body, screwed both ends for iron pipe or for unions and, complete all as specified and directed. (MAKE : Ess Ess, Cat No: RO-332 & E-2211 / PRAYAG, Cat No: 6718 / / Essco, Cat No: SQT-514EKN /SOMANY, Model: ETHER)
S&F in repair Chromium plated brass Angular stop cock, fancy type, concealed type with wall flange fixed to 15 mm bore of Iron pipe complete all as specified and directed. (Make :ESS ESS, Cat No: RO-112 / PRAYAG, Cat No: 6710 / ESSCO, Cat No: SQT-526NKN / SOMANY, Model: ETHER)
S&F in repair PTMT Angular stop cock, concealed type with wall flange fixed to 15 mm bore of Iron pipe complete all as specified and directed. (Make : PRAYAG, Cat No: 144-E or any other make as approved by GE)
S&F in repair chromium plated Hand shower (health faucet), ABS body with 1.0 metre long flexible tube in chrome finish with wall hook complete all as specified and directed. (MAKE : ESS ESS, Cat No: C-232X / PRAYAG, Cat No: 451 / ESSCO, Cat No: ALE-IVY-583 / SOMANY, Model: ETHER)
S&F in repairs chromium plated brass jet spray with one metre PVC tube complete all as specified and as directed . (Make : Essco, Cat No ALE-547/PRAYAG, Cat No: BEA-17 or equivalent as approved by GE)
S&F in repair urinal spreader of PTMT any colour for fixing with 15 mm dia pipe complete all as specified and directed. (Make: PRAYAG, Cat No: 186 or equivalent make as approved by GE)
S&F in repair urinal spreader, chromium plated for fixing with 15 mm dia pipe complete all as specified and directed. (Make : CERA, Cat No: F8070201 / PRAYAG, Cat No: BEA-25 or equivalent model as approved by GE)
S&F in repair CP waste coupling for Urinal Pot complete all as specified and directed. (Make PARRYWARE, Cat No: T9954A1 / PRAYAG, Cat No: BEA-09 or equivalent model as approved by GE)
S&F in repair 50 mm bore PVC urinal waste pipe, 800 mm long complete all as specified and directed. (Make: PRAYAG, Cat No: 345 or equivalent make as approved by GE)
S&F in repair self closing urinal flush valve, cast copper alloy, chromium plated, screwed for iron pipe and fixed complete all as specified and directed. (Make : HINDWARE, Cat No: F310016 / PARRYWARE, Cat No: G2007A1 / PRAYAG, Cat No: BSC-10 / CERA, Cat No: F9020201 / JAQUAR, Cat No: PRS-077)
S&F in repairs, Tubular towel rail, 20mm dia, 600 mm long between flanges including brass chromium plated, complete all as specified and directed. (MAKE : ESS ESS, Cat No : AC-701 / Essco, Cat No : AEC-1111N / PRAYAG, Cat No: BA-40 / SOMANY, Model: ETHER)
S&F in repairs, PTMT towel rail 600 mm complete all as specified and directed. (Make :PRAYAG, Cat No: 200 or equivalent make as approved by GE).
S&F in repair Towel Ring PTMT complete all as specified and directed. (Make :PRAYAG, Cat No: 196 or equivalent make as approved by GE).
S&F in repair Chromium plated brass Towel ring (premium quality) complete all as specified and directed. (Make : ESS ESS, Cat No: AC-702 / ESSCO, Cat No: AEC-1121N / PRAYAG, Cat No: BA-02 / SOMANY, Model: ETHER)
S&F in repair PVC framed mirror of size 500X400mm fixed on walls complete all as specified and directed.
S&F in repair 5.5 mm thick bevelled edge mirror of size as required fixed on 6mm thick acrylic PVC sheet complete all as specified and directed.
S&F in repair soap dish, PTMT body complete all as specified and directed. (Make : PRAYAG, Cat No : 195 or equivalent make as approved by GE).
S&F in repair PTMT shelf, 450 mm long complete all as specified and directed. (Make : PRAYAG, Cat No : 191 or equivalent make as approved by GE).
S&F in repair PTMT corner shelf, 200 mm long complete all as specified and directed. (Make : PRAYAG, Cat No : 192 or equivalent make as approved by GE).
S&F in repair sinks with drainage board made of stainless steel 1 mm thick in kitchen with plug washers, waste coupling, PVC waste pipe and fixing cantilever brackets connecting union to pipe, overall size of sink 914 mm x 460 mm and bowl size 405 mm x 354 mm x 203 mm complete including taking down existing sink complete all as specified and directed. (MAKE : CERA, Cat No: B4512201 /PRAYAG, Cat No. 1339D / PARRYWARE, Cat No: C855099 or equivalent model in NIRALI / ANJALI / JAYNA) (NOTE: Waste coupling and Waste pipe shall be measured and paid seperately)
Repair to CP brass item of Bib tap, Stop cock, Pillar tap, angular cock, shower rose, hand shower, health faucet etc of 15mm size including replacement of washer/spindle if required in day to day maintenance complete all as specified and directed.
S&F in repairs PTMT round grating 100 mm dia complete all as specified and directed. (Make : PRAYAG, Cat No: 111 or equivalent make as approved by GE)
S&F in repair CP grating 100mm size fixed with white cemnt complete all as directed. (Make : PRAYAG, Cat No : FT-62 or equivalent make as approved by GE)
S&F in repair acrylic bathroom cabinet box with mirror of size 622 mm X 422 mm size complete all as specified and directed. (MAKE: PRAYAG, Cat No: 555 or equivalent model in POLYTUF / JEXON / SHAKTI / NILKAMAL )
S&F in repairs Low density polythelene pipe connection, comprising of 15 mm dia 450 mm long having PTMT union at each end of connection to each of pillar tap/cistern/stop cock/urinal etc. at one end, stop cock at other end complete. (MAKE : PRAYAG, Cat No. 323 / POLYTUF, Cat No. 4003 / ESS ESS, Cat No: B2CH118 or equivalent model in SHAKTI / JEXON)
-ditto- all as per Item No. 70 here in before but 600mm long. (MAKE : PRAYAG, Cat No. 324 / POLYTUF, Cat No. 4004-D / SHAKTI, Cat No: SB 1324-D or equivalent model in JEXON / ESS ESS)
S&F in repair 32 mm bore PVC corrugated waste pipe, 800 mm long for wash hand basins, sinks etc complete all as specified and directed. (Make: PRAYAG, Cat No: 327 or equivalent make as spproved by GE)
S&F in repair 32 mm bore PVC collapsible waste pipe, 800 mm long complete all as specified and directed. (Make: PRAYAG, Cat No: 3272 or equivalent make as spproved by GE)
S&F in repair strainer for kitchen sinks, round, complete all as specified and directed. (Make: PRAYAG, Cat No: SA-03 or equivalent item as approved by GE)
S&F in repair chromium plated brass waste coupling, 32 mm size, full threaded complete all as specified and directed. (Make: PRAYAG, Cat No: BEA-11 / ESS ESS, Cat No: C-230C / ESSCO, Cat No: ALE-544NT)
S&F in repair 32mm CP Waste coupling (half threaded) complete all as specified and directed. (MAKE : PRAYAG, Cat No: BEA-10 / ESS ESS, Cat No: C-230H / ESSCO, Cat No: ALE-543HT)
S&F in repair coloured (any) PVC seat cover for EWC of any description with hinging device complete all as specified and directed.
-ditto- but white seat cover for EWC
S&F in repair Plastic seat & cover, white, soft close type, for coupled water closet (of any description) incl chromium plated hinge complete all as specified and directed. (Make : PARRYWARE, Cat No: E8300 / PRAYAG, Cat No: 725 or equivalent model in JAQUAR / CERA / HINDWARE)
S&F in repair PTMT bottle trap with internal portion 40 mm bore complete all as specified and directed (Make: PRAYAG, Cat No: 105 or equivalent model in JEXON / POLYTUF / SHAKTI)
S&F in repair CP bottle trap with internal portion 32mm size with 190mm long wall connection pipe complete all as specified and directed (Make: ESS ESS, Cat No: C-231C / PRAYAG, Cat No: BEA-23 / ESSCO, Cat No: ALE-773ML190x125)
S&F in repair 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and incl with flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed. (MAKE : PARRYWARE, Model : Slim line Economy / HINDWARE, Model : Sleek Plus / CERA, Model : Corona / PRAYAG, Model: SMART /ESSCO, Cat No: WHE-WHT-183NL)
Repair only to PVC flushing cistern incl cleaning and replacement of washer and syphonage of suitable size if required complete all as specified and directed.
Taking down WHB, any type or size and re-fixing in existing or new location with new brackets complete all as specified and directed.
S&F in repair Vitreous China Wash Hand Basin 630x450mm in size, White (Flat Back or Angle Back Type) with 32mm dia Brass Chromium Plated Waste Fitting, making good disturbed Surfaces in Cement Mortar 1:3 complete all as specified and directed. (MAKE : CERA, Cat No: S2040104 / HINDWARE, Cat No. 10001 or equivalent model in ASIAN PAINTS/PARRWARE) (NOTE: Waste coupling and Waste pipe shall be measured and paid seperately)
S&F in repair Vitreous china, white, half stall urinal flat back with grating and union for discharge pipe (excl flush pipe and flushing cistern and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing flush pipe, grating and Union for discharge pipe complete all as specified and directed. (Make: HINDWARE, Model: CORTO / PARRYWARE, Model: Aquaseal N / ASIAN PAINTS, Model: UR-22-MS or equivalent model in CERA)
S&F in repair vitreous China Squatting pan ‘Orissa’ pattern, size 580 X 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, etc and including making good to floor, complete all as specified and directed. (MAKE : CERA, Cat No: S3010109 / HINDWARE, Cat No. 20042 /ASIAN PAINTS, Cat No: WM-32-X / PARRYWARE, Cat No: C0126)
S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white and trap, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc including PVC seat cover complete all as specified and directed. (Make : Parryware, Model: Verve/CERA, Model: Celeb/HINDWARE, Model: Superb S) (NOTE: Cost of seat cover, hinges etc shall be deemed to be included in the quoted rate)
S&F in repair flush valve concealed push type (dual flush) 40 mm bore including concealed body and all other fittings complete all as specified and as directed. (Make: CERA, Cat No: F8010202 / HINDWARE, cat No: F860042 / PARRYWARE, Cat No: T3305A1 / PRAYAG, Cat No: BEA-37 / JAQUAR, Cat No: FLV-1089N)
S&F in repair 40 mm dia LDPE pipe with bends, etc fixed to walls, ceilings or floors including clamps complete all as specified and directed.
S&F in repair gun metal gate or globe valve, with iron wheel head, screwed both ends for iron pipe and fixed for 20 mm bore pipe complete all as specified and directed.
-ditto- but 25 mm bore gate valve
-ditto- but 40 mm bore gate valve
M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description over 10cm width or girth including cleaning and preparation of surfaces complete all as specified and directed.
M&L 2nd class hard wood plain solid straight chowkhats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.
M&L for mild steel bands and straps support or stays holdfast and similar articles conforming to Fe-290 Gde E-165 complete all as specified and directed.
M&L for preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, treating ends of posts, back of chowkhats etc, with tar or coal tar black paint, area tarred exc 0.1 sqm but n. exc 0.5 sqm each complete all as specified and directed.
-ditto- as per Item No. 97 above but treating small articles such as holdfasts, ends of posts, back of chowkhats, etc, area n exc 0.1 sqm each
S&F factory made 35 mm thick 2nd class hard wood panelled shutters (any Nos of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density wood particle board with commercial face veneers, fitted to chowkhats complete all as specified and directed.
S&F factory made 30 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR PartI, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.
S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded for fixing wire mesh including one shop coat of priming, complete all as specified and directed. (NOTE : Sheet glass for glazing shall be measured and paid seperately)
S&F 4 mm thick plain sheet glass ordinary quality and glazing with oil putty or wooden beads in square n.exc 0.50 Sqm in each pane complete all as specified and directed.
-ditto- but 4 mm thick frosted glass
S&F in repair powder coated (medium thickness of powder coating 50 micron) aluminium frame for door, windows, partitions and ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.
S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium doors shutters, aluminium section weighing 0.55 Kg/metre including necessary jointing cleats, glazing clips rubber packing handle 2 Nos in each door, hinges, Mortise lock vertical type size 100 mm 4 levers of brass in each door, anodised aluminium snap beading screws etc with 5.5 mm thick tinted glass ordinary quality as per manufactures instruction complete all as specified and directed. (NOTE: Quoted rate shall be deemed to be inclusive of the cost of sheet glass)
S&F in repair powder coated (minimum thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters, side hung type with sash bars, aluminium section weighing 0.55 Kg/metre including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as suitable peg stays, hinges and handles- 02 Nos etc with 4mm thick tinted/frosted glass ordinary quality as per manufactures instruction complete all as specified and directed. (NOTE: Quoted rate shall be deemed to be inclusive of the cost of sheet glass)
S&F in repair anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-Charge.
S&F stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F in repairs stainless steel wire cloth of 0.36mm nominal dia of wire & average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F PVC solid door frame of size 50 x 47 mm made out of 5 mm thick prelaminated single side PVC sheet reinforced with MS square tube complete all as specified and as directed.
S&F 30 mm thick factory made both side prelaminated solid panel PVC door shutter consisting of frame made out of MS tube of 19 gauge thickness and size of 19mm X 19mm for stiles, top and bottom rails, treated with a coat of metal primer, MS frame covered with heat moulded prelaminated PVC 'C' channel for stiles and both side prelaminated PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; stiles and rails feathered at edges, panelling of both side prelaminated PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement and fixing in frame complete all as specified and directed.
M&L for preparation of new untreated wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
S&F 100 mm stainless steel butt hinges (medium weight) cold rolled complete all as specified and directed.
S&F 75mm stainless steel butt hinges (medium weight) cold rolled complete all as specified and directed.
S&F 150 mm long aluminium anodised handles (cast type) ISI marked complete all as specified and directed.
S&F 125 mm long aluminium anodised handles (cast type) ISI marked complete all as specified and directed.
S&F 150 mm long aluminium anodised tower bolts extruded section, ISI marked complete all as specified and directed.
S&F 200 mm long aluminium anodised tower bolts extruded section, ISI marked complete all as specified and directed.
S&F 300mm long aluminium anodised sliding bolt with hasp, staple (bolt type) and fixing clips or sheets cast of extruded section and fixing bolts and sliding bolts of extruded section ISI marked complete all as specified and directed.
-ditto- but 300 mm sliding bolt fixed in repairs
M&L Rendering 15mm thick, on fair faces of brick or concrete surfaces of walls in cement mortar 1:6, finished even and smooth without using extra cement complete incl necessary scaffolding complete all as specified and directed.
M&L 10 mm thick rendering on ceiling surfaces in cement mortar 1:3, finishing even and smooth without using extra cement including necessary scaffolding complete all as a specified and as directed
S&F 0.50 mm thick TCT (total coated thickness) pre-coloured galvalume sheets with minimum base metal thickness of 0.45 mm, single skin high rib/multi rib profile galvalume sheeting having 1000-1020 mm width and 28-30 mm high crest @ maximum 250-255 mm pitch (centre) with sheets manufactured out of 0.50 mm this TCT (total coated thickness) high tensile galvalume sheets having tensile strength 550 MPA with 18-20 micron top coat over 5 micron primer and 8-10 micron alkyld backer zinc aluminium alloy AZ-150, sheets having a dip metallic zinc (43.5%0 aluminium (55%) & silicon (1.5%) with total mass coating of 150 gms/sqm on both sides, having wide pans with minimum 3 small stiffening ribs for effective water shedding and special male/female ends with full return legs on laps for purlin support and fixed as per existing profile of roof complete all as specified and directed.
All as per Item No. 124 above but 0.50 mm thick coloured plain galvalume sheet as in ridge/valley gutter of roof.
M&L for 6 mm thick asbestos cement, corrugated sheet in roof, wall fixed with L type or J type hook complete all as a specified and as directed
M&L for Asbestos cement one piece plain angular ridge 6mm thick, fixed with coach screws complete all as specified and directed.
S&F in repair 2mm thick fibre glass reinforced transluent corrugated or plain coloured/printed sheeting with two corugation side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed.
M&L for providing 40 mm thick plain cement concrete (1:2:4) type B1 using 20mm graded stone aggregate as in sub base of floor, etc complete all as specified and directed.
M&L 18-20mm thick granite slab in window cills, cooking platform etc and like set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match laid over screed bed 20mm thick in cement mortar 1:4 all as specified and as directed.
S&F join free ceramic coloured floor tiles (square/ rectangular), minimum 7mm thick, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as per approved design, set and jointed in neat cement slurry in floors and pointed in white or coloured cement to match the shade of tiles, laid over and including screed bed 15mm thick in cement mortar 1:4 complete all as specified and directed.
-ditto- as per Item No 131 but in skirting fixed over and including 10 mm thick screed bed in cement mortar 1:3
S&F join free ceramic coloured floor tiles (square/ rectangular), minimum 7 mm thick, area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, as per approved design, set and jointed in neat cement slurry in floors and pointed in white or coloured cement to match the shade of tiles, laid over and including screed bed 15mm thick in cement mortar 1:4 complete all as specified and directed.
-ditto- as per Item No 133 but in skirting fixed over and including 10 mm thick screed bed in cement mortar 1:3
S&F glazed coloured ceramic tiles in vertical surface, as per approved design, size 300 X 450 X 7 mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles, laid over and incl 10mm thick screed bed in cement mortar 1:3 complete all as specified and directed.
M&L for 75mm thick PCC (1:3:6) type 'C-2' (using 40mm graded crushed stone aggregate) as in sub base of fllor, hardstanding, path etc complete all as specified and directed.
M&L for 75mm thick PCC (1:3:6) type 'C-2' (using 40mm graded crushed stone aggregate) as in floor, plinth protection etc, surfaces finished even and smooth without using extra cement complete all as specified and directed.
M&L for 25mm thick PCC (1:2:4) type 'B-1' (using 20mm graded crushed stone aggregate) as in floor complete all as a specified and as directed
M&L 25 mm thick pre-polished coloured chequred tiles of size 300mm X 300mm, jointed & pointed in neat cement slurry with white or coloured to match the shade of tiles, laid over & incl 15 mm thick screed bed in cement mortar 1:4 complete all as specified & directed.
M&L for brushing neat cement slurry with 2.75 Kg of cement per Sqm on roof complete all as specified and directed.
M & L for cutting Grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 or cement concrete 1:2:4 type-B1 as required complete all as specified and directed.
M&L bituminous gola, with 80/25 bitumen and coarse sand mixture, 1:3 by weight, 8cmx8cm at the junction of roofing to vertical surfaces, all as specified and directed.
M&L for Providing Cement Concrete, 25 mm thick, type B-0, 1:2:4 (using 12.50 mm graded Stone aggregate), as in roof padding mixed with water proofing compound and the concrete surfaces is to be finished even and fair (without using extra cement) complete all as directed by Engineer - in - charge . (NOTE: WPC Shall be measured & paid separately)
M&L 15 mm thick screed bed in cement mortar 1:3 over roof mixed with water proofing compound as per manufacturer's instruction complete all as specified and directed. (NOTE: WPC will be measured and paid separately)
Supply only liquid Water Proofing Compound, conforming to IS and as approved, complete all as specified.
M&L for water proofing treatment on existing cleaned RCC roof with the following specifications and manufacturer's instruction complete all as specified and directed :- (i) Preparing and cleaning of fully dried surfaces as per IS 3067-1966. (ii) Applying bitumen primer conforming to IS:3384-1968 over the cleaned base @ 0.50 litre per sqm. (iii) Providing a layer of 3 mm thick APP modified pre-fabricated five layer, weight not less than 3.6 kg/sqm, black finished reinforced with non-woven polyster matt membrane with butane torch application. Overlap shall be minimum 100 mm on the transverse direction and 75 mm on longitudinal direction. (iv) Applying two coats of bitumen based UV reflective paint with aluminium finish @ 0.10 litre per sqm over APP membrane.
M&L for repair of loose joints or punctured patches of existing waterproofing membrane by removing all laitance, foreign matter, dirt, oil, grease and loose particles fom the top of APP membrane using conventional methods, removing air bubbles or blister areas, sealing of all open joints by torching method and fixing new 200 mm wide strip of 3 mm thick APP modified pre-fabricated five layer, weight not less than 3.6 kg/sqm, black finished reinforced with non-woven polyster matt membrane with butane torch application over the existing joint and finished with two coats of bitumen based UV reflective paint with aluminium finish @ 0.10 litre per sqm over APP membrane. (NOTE: The work is rquired to be executed in patches as per site requirement. As the repaired patch would be higher than the rest areas, it shall be ensured that no particular area is covered on all sides to avoid ponding during rains.
Supply, hoisting and fixing rotational moulded polyethylene water storage tank (cylindrical vertical type with closed top) of capacity 500 Litres, multi-layered (ISI marked), with GI tank nipple & cover, hoisted and fixed in position all as specified in SSR Part-I incl dismantling of existing unsv tank complete all as specified and directed. (NOTE: GI long screw shall be measured and paid seperately)
- ditto - all as per item No 148 here-in-before but 1000 ltrs capacity.
- ditto - all as per item No 148 here-in-before but 2000 ltrs capacity.
S&F in repair 40 mm bore GI long screw 150 mm long, fixed with service tank complete all as specified and directed.
-ditto- but 25 mm bore
-ditto- but 20 mm bore
S&F in repair 20 mm bore Ball brass valves, high pressure, with HDPE float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. (MAKE : PRAYAG, Cat No. B-152 or equivalent model in JEXON / POLYTUF / SHAKTI)
All as per Item No. 154 here-in-before but 25 mm bore Ball brass valves. (MAKE : PRAYAG, Cat No. B-153 or equivalent model in JEXON / POLYTUF / SHAKTI)
S&F in repair PTMT Ball Valve 15mm dia, high pressure with epoxy coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipe and fixed as in repair, complete all as specified and as directed. (MAKE : PRAYAG, Cat No. 151 or equivalent model in JEXON / POLYTUF / SHAKTI)
Disconnecting exiting water storage Tank of capacity exceeding 250 litres but not exceeding 500 liters for cleaning of water tank, removing of mud, sludge etc and flushing with chlorine water including supply and fixing of any damaged accessories for water Tank and writting MES No, Unit Name (With capital letter, not exceeding 15cm height and not exceeding 10ms each tank ) and re-connecting and refixing all connections complete all as specified and directed.
Disconnecting exiting water storage Tank of capacity exceeding 500 litres but not exceeding 1000 liters for cleaning of water tank, removing of mud, sludge etc and flushing with chlorine water including supply and fixing of any damaged accessories for water Tank and writting MES No, Unit Name (With capital letter, not exceeding 15cm height and not exceeding 10ms each tank ) and re-connecting and refixing all connections complete all as specified and directed.
Disconnecting existing water storage Tank of capacity exceeding 1000 litres but not exceeding 2000 liters for cleaning of water tank, removing of mud, sludge etc and flushing with chlorine water including supply and fixing of any damaged accessories for water Tank and writting MES No, Unit Name (With capital letter, not exceeding 15cm height and not exceeding 10ms each tank ) and re-connecting and refixing all connections complete all as specified and directed.
M&L for uprooting of plants or vegetation growth from wall up to roof level, applying two coats of tartaric acid and repair to broken/chipped off plastered surfaces with cement mortar 1:3 mixed with liquid water proofing compound as per manufacturer's instruction and sealed with 85/25 grade hot blown bitumen in patch not exc 2.0 sqm and removal of debris outside MOD land and disposed off complete all as specified and directed by Engineer -in charge.
M&L for cleaning of inaccesible areas of roof including parapet walls upto 0.50 metre height, removal of vegetation growth, including uprooting, if required and repair to broken/chipped off plastered surfaces with cement mortar 1:4, mixed with water proofing compound @ 200 ml per 50 kg bag of cement, finished fair and even including necessary ladder/scaffolding complete all as specified and directed. (NOTE: Water Proofing Compound shall be measured and paid seperately)
M&L for cleaning of outer surfaces of down take pipes, any type, treating minor leakages at joints, clearing of vegetation, scraping of algae growth with wire brush, chipping of damaged plaster at the joints (area not exc 0.50 sqm) and making good with cement mortar 1:4 duly mixed with water proofing compound @ 200 ml per 50 kg bag of cement and applying one coat of tartaric acid on dry finished plaster surface including necessary ladder/scaffolding complete all as specified and directed. (NOTE: Water Proofing Compound shall be measured and paid seperately)
M&L for small repairs of hinges of doors and windows, adjusting sliding door bolts, tower bolts, repair of handles, mortice locks etc and similar works complete all as specified and directed.
S&F 20mm dia fancy type chrominum plated drapery rod incl heavy duty decorative bracket and all fittings fixed on wall sample as approved by Engr-in-charge complete all as directed.
S&F Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed.
M&L in repair 19/20mm thick pre-laminated particle board as in cup board shutter double leaf one side decorative shade lamination and other side balancing white lamination. All edges properly sealed with 5mm thick 2nd class hardwood beading fixed with water resistant adhesive except rebate side which shall be of 25mm thick complete all as specified and directed.
S&F in repair Door closer hydraulically regulated, designation No. 2, universal type, cast iron body, suitable for door shutters of 701 to 850 mm in width and weight between 36 to 60 kg complete all as specified and directed.
S&F in repair drawer knobs 40 mm dia of brass polished fixed with nut screw and washer complete all as specified and directed.
S&F in repair for 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.
M&L for steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 complete all as specified and directed. (NOTE: Quoted rates shall be deemed to include for cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing and fitting angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing complete)
S&F plates (plain or chequered) channels, square cut or notched (ordninary and counter sunk) forming holes, without any attachment all as specified rolled mild steel in stairs (framed) including stringers, treades landing, balusters, hand rails etc including cleats, brackets etc complete all as specified and as directed.
S&F in repair 110 mm bore PVC (SWR) pipes, Type 'B', single socketed in any length with rubber ring joints fixed to walls with clamps for bldg height upto 4 storey incl necessary scaffolding complete all as specified and directed.
S&F in repair PVC (SWR) pipes 110 mm OD, Type 'B' single socketed in any length with rubber ring joints, laid in trenches complete.
S&F in repair PVC (SWR) junction single, (Single T) equal or unequal for 110 mm OD SWR pipe complete all as specified and directed.
S&F in repair PVC (SWR) bend, any radius for 110 mm OD SWR pipe complete all as specified and directed.
S&F in repair PVC (SWR) vent cowl for 110 mm OD SWR pipe complete all as specified and directed.
GHOSH ENTERPRISE
MS AP CONSTRUTION AND CO
UNIVERSAL TRADING CENTRE
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .