Loading
Loading…
Loading…
Tender Value
₹4.0 Cr
EMD Value
₹6.0 L
Closing Date
21 May 2026, 11:00 pmClosed
Minor Irrigation Department
EXECUTIVE ENGINEER
CONSTRUCTION OF MINOR IRRIGATION AND GEOLOGY OFFICE AT HEBBALA IN MYSORE CITY
MI/2026-27/BD/WORK_INDENT11658/CALL-2
MI/2026-27/BD/WORK_INDENT11658/CALL-2
Open
Buildings
Two Tender Document System(Two Cover)
Minor Irrigation Division Mysore
8 documents required · 8 mandatory
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Executed in any one year, the following minimum quantities of work - Earth Work Excavation 954.00 Cum - Providing Brick Masonry 332.00 Cum - Cement Concrete both PCC and RCC 447.00 Cum - Reinforcement of Steel 29.066 Tonne - Providing and laying vitrified flooring 671.00 Sqm - Design, Supplying, erecting, testing and commissioning of Passenger Lift - Minimum 8 Person Capacity - 1 Job
b)Satisfactorily completed ( at least 90% of the contract value), as prime contractor, at least one similar work such as CONSTRUCTION OF OFFICE BUILDINGS OF VALUE NOT LESS THAN RS 199.14 LAKHS (usually not less than 50% estimated value of contract)
Liquid assets and /or availability of credit facilities of not less than Rs 121.45 Lakhs(Credit lines/letter of credit/certificates from banks for meeting the fund requirement etc.)
3.2To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e., 2021-22, 2022-23, 2023-24, 2024-25 and 2025-26(a) Achieved in at least two financial years a minimum financial turnover (i,e from 2021-22 to 2025-26) (in all classes of civil engineering construction works only) of Rs 796.63 Lakhs (Attach certificates from chartered accountant ALONG WITH UDIN NUMBER)
Each Tenderer should further demonstrate(a)Availability by owning at least 50percent of the required specified key and critical equipment for this work and the remaining 50 percent can be deployed on lease hire basis for all works provided, the relevant documents Commitment agreements, RC book, Purchase invoice, sale deed, hire/lease deed , latest B-extracts, latest insurance copy etc) for availability for this work are furnished Hydraulic Excavator-2Nos(1 own,1 Lease or hire), Lorry / Tipper2Nos(1 own,1 Lease or hire), Transit Cement Concrete Mixer-2Nos(1 own,1 Lease or hire), Pin Vibrator-3 Nos(3 Lease or hire)
₹5,000
₹6.0 L
13 May 2026
13 May 2026
25 May 2026
18 May 2026
16 May 2026
TENTATIVE PHYSICAL / FINANCIAL ACTIVITY CHART
PÁªÀÄUÁjAiÀÄ ºÉ¸ÀgÀÄ : ZÁªÀÄgÁd£ÀUÀgÀ f¯Éè UÀÄAqÀÄè¥ÉÃmÉ vÁ®ÆèPÀÄ aPÀÌ£À¥ÀÄgÀ ªÀÄvÀÄÛ PÀUÀμÀ UÁæªÀÄUÀ¼À ºÀwÛgÀ ZÉPïqÁåA¤ªÀiÁðt PÁªÀÄUÁj.
Total Duration - 11 Months (Including Monsoon) Indent no : MI/2024-25/AB/WORK_INDENT4083 APT Rs 159,87,272.47
Sl. No. Code No Activity Unit Quantity Rate Amount ( in Rs) Physical Financial Progress (in lakhs)
1st Month 2nd Month 3rd Month 4th Month 5th Month 6th Month 7th Month 8th Month 9th Month 10th Month 11th Month Total
PHYSICAL FINANCIAL PHYSICAL FINANCIAL PHYSICAL FINANCIAL PHYSICAL FINANCIAL PHYSICAL FINANCIAL PHYSICAL FINANCIAL PHYSICAL FINANCIAL PHYSICAL FINANCIAL PHYSICAL FINANCIAL PHYSICAL FINANCIAL PHYSICAL FINANCIAL PHYSICAL FINANCIAL PHYSICAL FINANCIAL
1 Code No 1 Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness. By Mechanical Means using Dozer - In area of light jungle 100 Sqm 451.5 393 451.5 0 0 0 0 0 0 0 0 0 0
2 Code No 2 Cutting and removing jauliflora bushes upto 1.50 m girth excluding removal of stumps and including burning or disposing off the materials as directed with all other ancillary operations complete. Each 1120 25.5 1120 0 0 0 0 0 0 0 0 0 0
3 Code No 3 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m. Cum 1161.78 102 91.78 190 195 220 150 150 85 25 25 30 0
4 Code No 4 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In ordinary/soft rock without blasting - Depth exceeding 1.5 m, but not exceeding 3 m Cum 281.14 425 81.14 55 55 32 20 15 10 13 0 0 0
5 Code No 5 Providing rubble stone/boulder filling between or behind abutment below apron including cost of all materials, labour, hand packing, finishing top surface & all necessary works as directed and complete as per specification. Cum 190.95 1278 0 30 30 35 30 35 10 10 5 5.95 0
6 Code No 6 Providing and laying in-situ vibrated M-15 grade cement concrete using 40 mm down approved, clean, hard, graded aggregates for plain concrete works including cost of all materials, machinery, labour, cleaning, providing mortar layer for lift joints, batching, mixing, placing in position, levelling, vibrating, finishing, curing with all other ancillary operations complete Cum 0.999 6067 58.29 50 20.1 0 0 0 0 0 0 0 0
7 Code No 7 Providing and laying insitu vibrated M-20 ( 28 days cube compressive strength not less than 20 N / sq mm ) grade cement concrete using 20 mm down size approved, clean, hard, graded aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, including cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing, centering, formwork and scafolding and all other appurtenances required to complete the work as per technical specifications for check dam /pickups /irrigation tanks/waste weir/ sluice, sluice canal and other allied works like abutments/wing walls/returns/cutoff walls works & all necessary works as directed and complete as per specification. Cum 0.999 6955 235 170 130 100 170 190 175 180 200 100 25.18
8 Code No 8 Steel Fabrication - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification - All other type of structures. Tonne 0.9999 79011 0.999 3.24 3.5 2.7 2 0.5 0.5 0.000 0 0 0
9 Code No 9 Providing impervious filling adjacent to masonry / concrete structure and filling trial pits with soil available in adjacent area in layers of 100 to 150 mm and compacting each layer to density control of not less than 95 percent using pneumatic tampers or by vibratory earth rammers including cost of all materials, machinery, labour, picking previous layer, spreading soil in layer, breaking clods, watering & all necessary works as directed and complete as per specification. Cum 672.42 257 36.42 42 45 60 80 100 110 120 79 0 0
10 Code No 10 De-silting of Feeder Channel/Canal in dry condition by excavating the deposited bed material and loading the same to transport vehicle ( excluding cost of transportation ) including cost of all machinery, labour & all necessary works as directed and complete as per specification. Cum 7515 54 7350 0 0 0 0 0 0 0 0 0 165
11 Code No 11 Providing casing embankment using approved semi-pervious soil from soil borrow areas in layers of 250 to 300 mm (before compaction) including cost of all materials, machinery, labour, all other operations such as collection of soil, spreading soil in layer of specified thickness, sorting out, breaking clods, levelling, sectioning edges / sides, watering, compacting to density control of not less than 95 percent using power roller etc., complete with all lead and all lifts. Cum 0.999 454 0 0 0 0 0 0 0 0 0 650 385.6
12 Code No 12 Providing and constructing dry rubble stone pitching with pin headers at 2 per m2 using stones and stone chips from approved source including cost of all materials, labour, hand packing / wedging stone chips, finishing and all other ancillary operations complete. 300mm thick Sqm 235 455 0 0 0 0 0 0 0 0 0 62 173
13 Code No 13 Providing and constructing 450 mm thick hand packed rough stone revetment consisting of 300 mm thick rough stones with 400 to 450 mm long through stones at 1.5 m c / c over a backing of 150 mm thick 40 mm down graded coarse aggregate layer including cost of all materials, machinery, labour, laying to specified slope, wedging with chips, finishing etc., complete with all lead and lifts. Sqm 462 735 0 0 0 0 0 0 0 0 0 130 332
14 Code No 14 Painting Two Coats on New Concrete Surfaces - Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces Sqm 12 109 0 0 0 0 0 0 0 0 0 0 12
15 Code No 15 Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical Specifications M 93.6 138 0 0 0 0 0 0 0 0 0 0 93.6
16 Code No 16 Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade per cm height per letter 7600 1.6 0 0 0 0 0 0 0 0 0 0 7600
Milestone 1st Milestone 2st Milestone 3st Milestone 4th Milestone
Cumulative Milstone
APT Milestones and liquidity damages
MILESTONES AMOUNT Liquidity damage
Self loading Concrete mixer-2(1 OWN & 1 own/hire/lease) 5218549.533899999 Earthwork excavation, Desilting and Embankment (Combined Quantity) Cum 8715
Vibrator roller-1 own/hire/lease Cement Concrete both PCC and RCC Cum 1573
Reinforcement of Steel Tonne 14.9
EMD mini In Rs 240000
Annual turn over - In Lakhs 319.75
Line of credit In Lakhs 48
Similar nature of work - In Lakhs 79.95
qty calcuaton tender time
year / 12 30 % line of credit to APT DIFF
TENTATIVE PHYSICAL / FINANCIAL ACTIVITY CHART
NAME OF WORK : CONSTRUCTION OF MINOR IRRIGATION AND GEOLOGY OFFICE AT HEBBALA IN MYSORE CITY
Total Duration - 11 Months (Including Monsoon) Indent no : MI/2026-27/BD/WORK_INDENT11658/CALL-2 APT Rs 03,98,27,319.25 KW 4
Sl. No. Code No Activity Unit Quantity Rate Amount ( in Rs) Physical Financial Progress (in lakhs)
1st Month 2nd Month 3rd Month 4th Month 5th Month 6th Month 7th Month 8th Month 9th Month 10th Month 11th Month Total
PHYSICAL FINANCIAL PHYSICAL FINANCIAL PHYSICAL FINANCIAL PHYSICAL FINANCIAL PHYSICAL FINANCIAL PHYSICAL FINANCIAL PHYSICAL FINANCIAL PHYSICAL FINANCIAL PHYSICAL FINANCIAL PHYSICAL FINANCIAL PHYSICAL FINANCIAL PHYSICAL FINANCIAL PHYSICAL FINANCIAL
1 Vol 1 PNo 8 ITNo 1.12 202324 Earth work in surface excavation by mechanical means for lowering and leveling the ground for all works other than foundation in all kinds of soils and upto depth not exceeding 300mm as per drawing and technical specifications including setting out shoring strutting barricading caution lights removal of stumps and other deleterious matter including dressing of excavated surfaces disposing off or levelling the excavated earth or sorting and stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour tools usage of machinery and other appurtenances required complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 336.6 99.75 160 176.6
2 Vol 1 PNo 8 ITNo 1.14.1 202324 Earth work excavation for Foundation by mechanical means for all works and depth upto 3 m as per drawing and technical specifications including setting out shoring strutting barricading caution lights including dressing of excavated surfaces disposing off or levelling the excavated earth or sorting and stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour tools usage of machinery and other appurtenaces required to complete the work In all kinds of soils Depth upto 3 mcomplete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 602.2499999999999 107.1 350 252.25
3 Vol 1 PNo 8 ITNo 1.12.2 202324 Earth work excavation for Foundation by mechanical means for all works and depth upto 3 m as per drawing and technical specifications including setting out shoring strutting barricading caution lights including dressing of excavated surfaces disposing off or levelling the excavated earth or sorting and stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour tools usage of machinery and other appurtenaces required to complete the work In ordinary soft rock without blasting Depth exceeding 1.5 m but not exceeding 3 mcomplete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 229.02 446.25 50 179.02
4 Vol 2 PNo 5 ITNo 4.1 202324 Providing and injecting chemical emulsion for Pre constructional Anti Termite Treatment creating continuous chemical barrier under and around the column pits walls trenches basement excavation top surface of the plinth filling junction of wall and floor along the external perimeter of building expansion joints over the top surface of consolidated earth on which apron is to be laid surrounding of pipes and conduits with Chlorpyriphos 20 Percentage E.C. Lindane 20 Percentage E.C. at 3.19 l m2 including cost of chemical diluting in water to one percent concentration labour usage charges of machinery complete as per specifications complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 1595.62 123.9 650 945.62
5 Vol 1 PNo 15 ITNo 2.1.3 202324 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed laid in layers not exceeding 150 mm thickness well compacted using plate vibrators including all lead and lifts cost of all materials of quality labour Usage charges of machinery curing and all the other appurtenances required to complete the work as per technical specifications Mix 1 3 6 Using 40 mm nominal size graded crushed coarse aggregates complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 85.97000000000001 6213.9 35 25 25.97
6 Vol 2 PNo 9 ITNo 5.2 202324 Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1 6 (1 cement 6 coarse sand) complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 58.2 6923.7 25 33.2
7 Vol 2 PNo 9 ITNo 5.3 202324 Providing Coursed rubble masonry (second sort) with hard stone in foundation and plinth with Cement mortar 1 6 (1 cement 6 coarse sand) complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 43.66 6490.05 20 23.66
8 Vol 2 PNo 214 ITNo 8.80 202324 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer in charge 20 mm to 25 mm wide to required depth complete with all lead and lifts and as per the directions of Engineer in charge of the work M 431.08 69.3 120 150 161.08
9 Vol 1 PNo 16 ITNo 2.4.3 202324 Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works and super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers well compacted using needle vibrators. The cost includes all lead and lifts cost of all materials quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatescomplete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 171.23000000000002 9807.525 50 40 40 41.23
10 Vol 1 PNo 16 ITNo 2.5.2 202324 Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works and super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers well compacted using needle vibrators. The cost includes all lead and lifts cost of all materials quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 10.690000000000001 12020.189999999999 5 5.69
11 Vol 1 PNo 16 ITNo 2.5.2 202324 Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works and super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers well compacted using needle vibrators. The cost includes all lead and lifts cost of all materials quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatescomplete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 21.44 11313.119999999999 12 9.44
12 Vol 1 PNo 16 ITNo 2.5.2 202324 Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works and super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers well compacted using needle vibrators. The cost includes all lead and lifts cost of all materials quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatescomplete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 55.75 10606.05 15 20 15 5.75
13 Vol 1 PNo 16 ITNo 2.5.2 202324 Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works and super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers well compacted using needle vibrators. The cost includes all lead and lifts cost of all materials quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 9.928000000000003 9807.525 4 4 0.000
14 Vol 2 PNo 13 ITNo 6.6 202324 Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 5.0 conforming to IS 2222 in superstructure above plinth level in cement mortar 1 6 (1 cement 6 coarse sand) With Modular bricks including cost of all materials labour ascaffolding and usage charges of machinery and other incidental charges complete as per the direction of engineer incharge of work. Cum 133.87 12186.3 20 26 30 32 5 5 7.87 8
15 Vol 1 PNo 84 ITNo 2.11 202324 Supplying fitting and placing TMT FE 550 550D Steel Reinforcement including cost of all materials machinery labour cleaning straightening cutting bending hooking laping welding joints tying with binding wire soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.complete with all lead and lifts and as per the directions of Engineer in charge of the work Tonne 14.68 94987.2 0.000 4 4 0.999
16 Vol 2 PNo 41 ITNo 8.2.1 202324 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1 4 (1 cement 4 fine sand) including rounding off corners wherever required smooth rendering providing and removing scaffolding including cost of materials labour curing complete as per specifications complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 406.13 307.65 200 200 6.13
17 Vol 2 PNo 41 ITNo 8.1.1 202324 Providing 12 mm cement plaster with cement mortar 1 4 (1 cement 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering providing and removing scaffolding including cost of materials labour curing complete as per specificationscomplete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 363.74 265.65 150 150 63.74
18 Vol 2 PNo 42 ITNo 8.8 202324 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1 5 (1 cement 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1 6 (1 cement 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering providing and removing scaffolding including cost of materials labour curing complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 1025.2299999999996 387.45 360 400 260 5.23
19 Vol 2 PNo 50 ITNo 8.5.1 202324 Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete as per specifications complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 1388.9699999999996 105 680 708.97
20 Vol 2 PNo 60 ITNo 9.12.2 202324 Providing and laying vitrified floor tiles with thickness 9 10 mm in different sizes with water absorption less than 0.08 Percentage and conforming to IS 15622 of approved make in all colours and shades laid on 20mm thick cement mortar 1 4 (1 cement 4 coarse sand) jointing with grey cement slurry at 3.3 kg m2 including grouting the joints with white cement and matching pigments Size of Tile 600x600 mmcomplete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 280.3 1198.05 150 130.3
21 Vol 2 PNo 64 ITNo 9.30 202324 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1 6 20 mm thick and joints finished with cement mortar 1 3 over existing cement concrete bed including cost of materials mortar labour curing complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 64.42 5592.3 30 34.42
22 Vol 2 PNo 71 ITNo 10.14 202324 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS 15622 (thickness to be specified by the manufacturer) of approved make in all colours shades except burgundy bottle green black of any size as approved by Engineer in Charge in skirting risers of steps and dados over 12 mm thick bed of cement mortar 1 3 (1 cement 3 coarse sand) and jointing with grey cement slurry at 3.3kg m2 including pointing in white cement mixed with pigment of matching shade complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 46.519999999999996 1157.1 20 26.52
23 Vol 2 PNo 45 ITNo 8.25 202324 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt dust mortar drops and foreign matter including preparing the surface even and sand paper smooth cost of materials labour complete as per specifications and as per directions of Engineer in charge Sqm 406.13 143.85 260 146.13
24 Vol 2 PNo 46 ITNo 8.31 202324 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade New work (Two coats applied at 1.43 ltr 10 m2 over and including priming coat of exterior primer applied at 2.20 kg 10 m2) with paint of approved quality to give an even shade after thoroughly brooming the surface to remove all dirt dust mortar drops and foreign matter including preparing the surface even and sand paper smooth cost of materials labour complete as per specifications and as per directions of Engineer in charge. Sqm 406.13 186.9 260 146.13
25 Vol 2 PNo 46 ITNo 8.33.1 202324 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Two coats applied on walls at 1.25 ltr 10 m2 over and including one coat of Special primer applied at 0.75 ltr 10 m2 with paint of approved quality to give an even shade after thoroughly brooming the surface to remove all dirt dust mortar drops and foreign matter including preparing the surface even and sand paper smooth cost of materials labour complete as per specifications and as per directions of Engineer in charge. Sqm 1388.9699999999996 165.9 450 650 288.97
26 Vol 2 PNo 99 ITNo 12.11 202324 Providing Honne wood frames of doors windows clerestory windows ventilators and other frames wrought framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps) but including cost of materials labour usage charges complete as per specifications.complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 1.0999999999999999 144977.7 1.1
27 Vol 2 PNo 104 ITNo 12.51 202324 KSRB 9 27.1 Fixing of door frame in an existing opening including embeeding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1 3 6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame making good the damages to walls and floor as required and disposal of the debries with lead upto 50 m. including cost of materials labour charges complete as per specifications.complete with all lead and lifts and as per the directions of Engineer in charge of the work No 16 1065.75 8 8
28 Vol 2 PNo 103 ITNo 12.51 202324 Providing and fixing in position Honne wood half panelled shutters at bottom and half glazed at top for window shutters with stiles and rails of 35mm. thick 75mm wide in two halves with panels of 25mm thick 3mm thick reeded glass for top panels fixed with wooden beading including cost of materials labour charges usage charges complete as per specifications. (excluding cost of fixtures)complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 11.93 7264.95 5 6.93
29 Vol 2 PNo 108 ITNo 12.83.2 202324 Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance plus or minus1mm) with wall thickness 2.0 mm (plus or minus 0.2 mm) corners of the door frame to be Jointed with galvanized brackets and stainless steel screws joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (plus or minus 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer in charge 42x50 mm PVC Extruded sectioncomplete with all lead and lifts and as per the directions of Engineer in charge of the work M 30 250.95 30
30 Vol 2 PNo 111 ITNo 12.92 202324 Providing and fixing of Openable door made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) and lead free with gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile through out the openable frame. The frame having overall size of 60mm x 55mm with GI reinforcement of 1mm thickness and openable sash with overall size of 60mm x 102mm and GI reinforcement of 2mm thickness. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 34 mm. Windows shall be provided with 6mm plain float glass Standard hardware with 2D 3D hinge and Multi point locking system with Handle. Wall thickness of frame and sash shall be of 2mm 2.5mm. Maximum possible size – 900mm x 2400mm. (The cost is inclusive of all fixtures and separate charges for minor T and P's shall not be made)complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 9.45 6557.25 9.45
31 Vol 2 PNo 200 ITNo 20.34.1 202324 Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete. 125x70x4 mm (ordinary type)complete with all lead and lifts and as per the directions of Engineer in charge of the work Each 48 178.5 48
32 Vol 2 PNo 105 ITNo 12.62 202324 Providing and fixing chromium plated brass handles of 100 125 mm with necessary screwscomplete with all lead and lifts and as per the directions of Engineer in charge of the work No 11 248.85 11
33 Vol 2 PNo 105 ITNo 12.60 202324 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws complete with all lead and lifts and as per the directions of Engineer in charge of the work No 11 1104.6 11
34 Vol 2 PNo 105 ITNo 12.58 202324 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws complete with all lead and lifts and as per the directions of Engineer in charge of the work No 11 126 11
35 Vol 2 PNo 105 ITNo 12.59 202324 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI IS 3564 embossed on the body door weight upto 35 kg and door width upto 700 mm) with necessary accessories and screws complete with all lead and lifts and as per the directions of Engineer in charge of the work No 11 1169.7 11
36 Vol 2 PNo 110 ITNo 12.90 202324 Providing and fixing of 3 track x 2 panel sliding windows made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile through out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass standard hardware and Multi point locking system with touch lock. Wall thickness of frame and sash shall be of 2mm 2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T and P shall not be made)complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 62.78 7070.7 62.78
37 Vol 2 PNo 85 ITNo 11.28 202324 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes channels plates etc. including welding grinding buffing polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete i c fixing the railing with necessary accessories and stainless steel dash fasteners stainless steel bolts etc. of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer in charge (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts bolts fasteners etc.) including cost of materials labour usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge. Sqm 218.1 593.25 218.1
38 Vol 2 PNo 149 ITNo 15.1 202324 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace Chajjas Sunken portion of WC Bathroom cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400 Percentage and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats at 1.6 kg m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer at 150 g m2 and protection with 120gsm Geo textile over the waterproofing membrane. The finished cost to include surface preparation making coving at Junction Bore Packing treatment of construction joints completely as per specification.complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 31.89 857.85 16 15.89
39 Code No39 Design supplying erecting testing and commissioning of Passenger Bed cum passenger hospital lift with speed of 1mtr per second variable voltage variable frequency drive with or without machine room for the available well size operating at 415 V 3 phase 50 cycles AC supply powder coated Stainless Steel car entrance doors enclosures with suitable colour vinyl flooring LED car illumination emergency light intercom and fan as desired by the user central opening side opening door with or without attendant operation 7 segment display buttons call register indicator fireman drive SS handrails inside car full length infrared curtain in car door automatic rescue device with batteries voice announcing in regional international languages Braille buttons with one year warranty and maintenance with necessary scaffolding and minor civil works like fixing of guide rail counter weight etc.The total product and services shall adhere to IS 14665 2016 ( with latest amendments) part section 1 to 5 with regards to general guidelines of fire safety rated doors MRLL beams pressure switch manual change over for doors during emergency ARD of 10 times with sufficient battery back up and standard dimensions of chair car and door openings for all sizes and capacities of lifts including fitness certificate and duly observing all other safety norms prescribed and adhere to CPWD specifications PCB Norms National Electricity Code (NEC) NBC 2016 IEC and Karnataka State Lifts Escalators and Passengers Conveyers Act 2012 and Rules 2014. The Supplier shall be registered in Government Electrical Inspectorate in the State of Karnataka. B.With Machine Room SS Finishcomplete with all lead and lifts and as per the directions of Engineer in charge of the work Job 1 1604115.45 1
40 Vol 2 PNo 86 ITNo 11.34B 202324 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings wooden frames with rawl plugs screws complete with all lead and lifts and as per the directions of Engineer in charge of the work Kg 627.8 197.9145 600 27.8
41 Vol 2 PNo 82 ITNo 11.16.2 202324 Providing and fixing Steel work in built up tubular (round square or rectangular hollow tubes etc.) trusses etc. including cutting hoisting fixing in position and applying a priming coat of approved steel primer including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials labour usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge Kg 1764.54 158.9805 464.54 500 800
42 Vol 1 PNo 16 ITNo 2.5.2 202324 Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works and super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers well compacted using needle vibrators. The cost includes all lead and lifts cost of all materials quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatescomplete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 11.190000000000001 12140.393999999998 11.19
43 Vol 1 PNo 16 ITNo 2.5.2 202324 Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works and super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers well compacted using needle vibrators. The cost includes all lead and lifts cost of all materials quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatescomplete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 22.020000000000003 11426.247 22.02
44 Vol 1 PNo 16 ITNo 2.5.2 202324 Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works and super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers well compacted using needle vibrators. The cost includes all lead and lifts cost of all materials quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatescomplete with all lead and lifts and as per the directions of Engineer in charge of the work. Cum 3.59 10712.1105 3.59
45 Vol 1 PNo 16 ITNo 2.5.2 202324 Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works and super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers well compacted using needle vibrators. The cost includes all lead and lifts cost of all materials quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatescomplete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 53.65 10712.1105 25 20 8.65
46 Vol 2 PNo 13 ITNo 6.6 202324 Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 5.0 conforming to IS 2222 in superstructure above plinth level in cement mortar 1 6 (1 cement 6 coarse sand) With Modular bricks including cost of all materials labour ascaffolding and usage charges of machinery and other incidental charges complete as per the direction of engineer incharge of work. Cum 123.23 12308.162999999999 60 63.23
47 Vol 1 PNo 84 ITNo 2.11 202324 Supplying fitting and placing TMT FE 550 550D Steel Reinforcement including cost of all materials machinery labour cleaning straightening cutting bending hooking laping welding joints tying with binding wire soft annealed steel wire and other ancilary operations complete with all lead and lifts and as per the directions of Engineer in charge of the work Tonne 0.000 95937.072 4 5 0.000
48 Vol 1 PNo 16 ITNo 2.5.2 202324 Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works and super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers well compacted using needle vibrators. The cost includes all lead and lifts cost of all materials quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatescomplete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 2.9299999999999997 10355.036999999998 2.93
49 Vol 2 PNo 41 ITNo 8.2.1 202324 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1 4 (1 cement 4 fine sand) including rounding off corners wherever required smooth rendering providing and removing scaffolding including cost of materials labour curing complete as per specifications and as per directions of Engineer in charge. Sqm 365.18000000000006 310.7265 60 120 180 5.18
50 Vol 2 PNo 41 ITNo 8.1.1 202324 Providing 12 mm cement plaster with cement mortar 1 4 (1 cement 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering providing and removing scaffolding including cost of materials labour curing complete as per specifications and as per directions of Engineer in charge Sqm 373.40000000000003 268.3065 110 190 73.4
51 Vol 2 PNo 42 ITNo 8.8 202324 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1 5 (1 cement 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1 6 (1 cement 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering providing and removing scaffolding including cost of materials labour curing complete as per specifications and as per directions of Engineer in charge. Sqm 1053.9299999999998 391.3245 650 400 3.93
52 Vol 2 PNo 50 ITNo 8.51 202324 Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Sqm 1427.33 106.05 650 777.33
53 Vol 2 PNo 60 ITNo 9.12.2 202324 Providing and laying vitrified floor tiles with thickness 9 10 mm in different sizes with water absorption less than 0.08 Percentage and conforming to IS 15622 of approved make in all colours and shades laid on 20mm thick cement mortar 1 4 (1 cement 4 coarse sand) jointing with grey cement slurry at 3.3 kg m2 including grouting the joints with white cement and matching pigments Size of Tile 600x600 mmcomplete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 273.35999999999996 1210.0305 50 100 100 23.36
54 Vol 2 PNo 64 ITNo 9.30 202324 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1 6 20 mm thick and joints finished with cement mortar 1 3 over existing cement concrete bed including cost of materials mortar labour curing complete as per specifications.complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 64.43 5648.223 0.000
55 Vol 2 PNo 71 ITNo 10.14 202324 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS 15622 (thickness to be specified by the manufacturer) of approved make in all colours shades except burgundy bottle green black of any size as approved by Engineer in Charge in skirting risers of steps and dados over 12 mm thick bed of cement mortar 1 3 (1 cement 3 coarse sand) and jointing with grey cement slurry at 3.3kg m2 including pointing in white cement mixed with pigment of matching shade complete.complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 46.519999999999996 1168.671 20 26.52
56 Vol 2 PNo 45 ITNo 8.25 202324 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt dust mortar drops and foreign matter including preparing the surface even and sand paper smooth cost of materials labour complete as per specifications and as per directions of Engineer in charge. Sqm 365.17 145.2885 119.99 245.18
57 Vol 2 PNo 46 ITNo 8.31 202324 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade New work (Two coats applied at 1.43 ltr 10 m2 over and including priming coat of exterior primer applied at 2.20 kg 10 m2) with paint of approved quality to give an even shade after thoroughly brooming the surface to remove all dirt dust mortar drops and foreign matter including preparing the surface even and sand paper smooth cost of materials labour complete as per specifications and as per directions of Engineer in charge. Sqm 365.18000000000006 188.769 180 185.18
58 Vol 2 PNo 46 ITNo 8.33.1 202324 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Two coats applied on walls at 1.25 ltr 10 m2 over and including one coat of Special primer applied at 0.75 ltr 10 m2 with paint of approved quality to give an even shade after thoroughly brooming the surface to remove all dirt dust mortar drops and foreign matter including preparing the surface even and sand paper smooth cost of materials labour complete as per specifications and as per directions of Engineer in charge. Sqm 1427.33 167.55900000000003 750 677.33
59 Vol 2 PNo 99 ITNo 2.11 202324 Providing Honne wood frames of doors windows clerestory windows ventilators and other frames wrought framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps) but including cost of materials labour usage charges complete as per specificationscomplete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 0.083 146427.47699999998 0.999
60 Vol 2 PNo 99 ITNo 2.11 202324 Providing Honne wood frames of doors windows clerestory windows ventilators and other frames wrought framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps) but including cost of materials labour usage charges complete as per specifications.complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 0.889 146427.47699999998 0.000
61 Vol 2 PNo 104 ITNo 12.51 202324 KSRB 9 27.1 Fixing of door frame in an existing opening including embeeding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1 3 6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame making good the damages to walls and floor as required and disposal of the debries with lead upto 50 m. including cost of materials labour charges complete as per specifications.complete with all lead and lifts and as per the directions of Engineer in charge of the work No 13 1076.4075 6 7
62 Vol 2 PNo 104 ITNo 12.51 202324 Providing and fixing in position Honne wood half panelled shutters at bottom and half glazed at top for window shutters with stiles and rails of 35mm. thick 75mm wide in two halves with panels of 25mm thick 3mm thick reeded glass for top panels fixed with wooden beading including cost of materials labour charges usage charges complete as per specifications. (excluding cost of fixtures) complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 2.73 7337.599499999999 2.73
63 Vol 2 PNo 103 ITNo 12.36 202324 Providing and fixing in position Honne wood half panelled shutters at bottom and half glazed at top for window shutters with stiles and rails of 35mm. thick 75mm wide in two halves with panels of 25mm thick 3mm thick reeded glass for top panels fixed with wooden beading including cost of materials labour charges usage charges complete as per specifications. (excluding cost of fixtures)complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 7.1 7337.599499999999 7.1
64 Vol 2 PNo 108 ITNo 12.83.2 202324 Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance 1mm) with wall thickness 2.0 mm (plus or minus 0.2 mm) corners of the door frame to be Jointed with galvanized brackets and stainless steel screws joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (plus or minus 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer in charge 42x50 mm PVC Extruded section complete with all lead and lifts and as per the directions of Engineer in charge of the work M 24 253.4595 12 12
65 Vol 2 PNo 111 ITNo 12.92 202324 Providing and fixing of Openable door made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) and lead free with gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile through out the openable frame. The frame having overall size of 60mm x 55mm with GI reinforcement of 1mm thickness and openable sash with overall size of 60mm x 102mm and GI reinforcement of 2mm thickness. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 34 mm. Windows shall be provided with 6mm plain float glass Standard hardware with 2D 3D hinge and Multi point locking system with Handle. Wall thickness of frame and sash shall be of 2mm 2.5mm. Maximum possible size – 900mm x 2400mm. (The cost is inclusive of all fixtures and separate charges for minor T and P's shall not be made)complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 5.67 6622.8225 5.67
66 Vol 2 PNo 200 ITNo 12.34.1 202324 Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete. 125x70x4 mm (ordinary type) complete with all lead and lifts and as per the directions of Engineer in charge of the work Each 51 180.285 51
67 Vol 2 PNo 105 ITNo 12.62 202324 Providing and fixing chromium plated brass handles of 100 125 mm with necessary screws complete with all lead and lifts and as per the directions of Engineer in charge of the work No 16 251.3385 16
68 Vol 2 PNo 105 ITNo 12.60 202324 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws complete with all lead and lifts and as per the directions of Engineer in charge of the work No 16 1115.646 16
69 Vol 2 PNo 105 ITNo 12.58 202324 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws complete with all lead and lifts and as per the directions of Engineer in charge of the work No 16 127.26 16
70 Vol 2 PNo 105 ITNo 12.59 202324 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI IS 3564 embossed on the body door weight upto 35 kg and door width upto 700 mm) with necessary accessories and screws complete with all lead and lifts and as per the directions of Engineer in charge of the work No 16 1181.3970000000002 16
71 Vol 2 PNo 110 ITNo 12.90 202324 Providing and fixing of 3 track x 2 panel sliding windows made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile through out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass standard hardware and Multi point locking system with touch lock. Wall thickness of frame and sash shall be of 2mm 2.5mm. Maximum possible size – 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T and P's shall not be made) complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 60 7141.407 30 30
72 Vol 2 PNo 86 ITNo 11.34B 202324 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings wooden frames with rawl plugs screws complete with all lead and lifts and as per the directions of Engineer in charge of the work Kg 600 194.07150000000001 350 250
73 Vol 2 PNo 85 ITNo 11.28 202324 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes channels plates etc. including welding grinding buffing polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete i c fixing the railing with necessary accessories and stainless steel dash fasteners stainless steel bolts etc. of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer in charge (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts bolts fasteners etc.) including cost of materials labour usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge. Kg 262.5 599.1825 150 112.5
74 Vol 2 PNo 149 ITNo 15.1 202324 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace Chajjas Sunken portion of WC Bathroom cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400 Percentage and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats at 1.6 kg m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer at 150 g m2 and protection with 120gsm Geo textile over the waterproofing membrane. The finished cost to include surface preparation making coving at Junction Bore Packing treatment of construction joints completely as per specification.complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 31.89 866.4285 15 16.89
75 Vol 1 PNo 16 ITNo 2.5.2 202324 Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works and super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers well compacted using needle vibrators. The cost includes all lead and lifts cost of all materials quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 11.190000000000001 12260.597999999998 5 6.19
76 Vol 1 PNo 16 ITNo 2.5.2 202324 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 22.020000000000003 11539.3845 10 12.02
77 Vol 1 PNo 16 ITNo 2.5.2 202324 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates including cost of materials labour usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge. Cum 3.59 10818.171 3.59
78 Vol 1 PNo 16 ITNo 2.5.2 202324 Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works and super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers well compacted using needle vibrators. The cost includes all lead and lifts cost of all materials quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 53.66 10818.171 25 20 8.66
79 Vol 2 PNo 13 ITNo 6.6 202324 Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 5.0 conforming to IS 2222 in superstructure above plinth level in cement mortar 1 6 (1 cement 6 coarse sand) With Modular bricks including cost of all materials labour ascaffolding and usage charges of machinery and other incidental charges complete as per the direction of engineer incharge of work. Cum 123.24 12430.026000000002 60 63.24
80 Vol 1 PNo 84 ITNo 2.11A 202324 Supplying fitting and placing TMT FE 550 550D Steel Reinforcement including cost of all materials machinery labour cleaning straightening cutting bending hooking laping welding joints tying with binding wire soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.complete with all lead and lifts and as per the directions of Engineer in charge of the work Tonne 0.000 96886.94 3 2 0.000
81 Vol 1 PNo 16 ITNo 2.5.2 202324 Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works and super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers well compacted using needle vibrators. The cost includes all lead and lifts cost of all materials quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 2.9299999999999997 10457.56 2.93
82 Vol 2 PNo 41 ITNo 8.2.1 202324 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1 4 (1 cement 4 fine sand) including rounding off corners wherever required smooth rendering providing and removing scaffolding including cost of materials labour curing complete as per specifications and as per directions of Engineer in charge. Sqm 365.18000000000006 313.8 200 165.18
83 Vol 2 PNo 41 ITNo 8.1.1 202324 Providing 12 mm cement plaster with cement mortar 1 4 (1 cement 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering providing and removing scaffolding including cost of materials labour curing complete as per specifications and as per directions of Engineer in charge Sqm 373.40000000000003 270.96 200 173.4
84 Vol 2 PNo 42 ITNo 8.8 202324 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1 5 (1 cement 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1 6 (1 cement 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering providing and removing scaffolding including cost of materials labour curing complete as per specifications and as per directions of Engineer in charge Sqm 1053.9299999999998 395.19 350 350 353.93
85 Vol 2 PNo 50 ITNo 8.51 202324 Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Sqm 1427.33 107.1 450 450 527.33
86 Vol 2 PNo 60 ITNo 9.12.2 202324 Providing and laying vitrified floor tiles with thickness 9 10 mm in different sizes with water absorption less than 0.08 Percentage and conforming to IS 15622 of approved make in all colours and shades laid on 20mm thick cement mortar 1 4 (1 cement 4 coarse sand) jointing with grey cement slurry at 3.3 kg m2 including grouting the joints with white cement and matching pigments Size of Tile 600x600 mmcomplete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 273.35999999999996 1222.01 73.36 50 150
87 Vol 2 PNo 60 ITNo 9.12.2 202324 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1 6 20 mm thick and joints finished with cement mortar 1 3 over existing cement concrete bed including cost of materials mortar labour curing complete as per specifications.complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 64.42 5704.14 20 19.994 0.999
88 Vol 2 PNo 71 ITNo 10.14 202324 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS 15622 (thickness to be specified by the manufacturer) of approved make in all colours shades except burgundy bottle green black of any size as approved by Engineer in Charge in skirting risers of steps and dados over 12 mm thick bed of cement mortar 1 3 (1 cement 3 coarse sand) and jointing with grey cement slurry at 3.3kg m2 including pointing in white cement mixed with pigment of matching shadecomplete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 127.58 1180.24 50 50 27.58
89 Vol 2 PNo 45 ITNo 8.25 202324 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt dust mortar drops and foreign matter including preparing the surface even and sand paper smooth cost of materials labour complete as per specifications and as per directions of Engineer in charge. Sqm 365.18000000000006 146.72 150 215.18
90 Vol 2 PNo 46 ITNo 8.31 202324 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade New work (Two coats applied at 1.43 ltr 10 m2 over and including priming coat of exterior primer applied at 2.20 kg 10 m2) with paint of approved quality to give an even shade after thoroughly brooming the surface to remove all dirt dust mortar drops and foreign matter including preparing the surface even and sand paper smooth cost of materials labour complete as per specifications and as per directions of Engineer in charge. Sqm 365.18000000000006 190.64 240 125.18
91 Vol 2 PNo 46 ITNo 8.33.1 202324 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Two coats applied on walls at 1.25 ltr 10 m2 over and including one coat of Special primer applied at 0.75 ltr 10 m2 with paint of approved quality to give an even shade after thoroughly brooming the surface to remove all dirt dust mortar drops and foreign matter including preparing the surface even and sand paper smooth cost of materials labour complete as per specifications and as per directions of Engineer in charge. Sqm 1427.33 169.23 650 777.33
92 Vol 2 PNo 99 ITNo 12.11 202324 Providing Honne wood frames of doors windows clerestory windows ventilators and other frames wrought framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps) but including cost of materials labour usage charges complete as per specifications.complete with all lead and lifts and as per the directions of Engineer in charge of the work. Cum 0.083 147877.25 0.999
93 Vol 2 PNo 99 ITNo 12.11 202324 Providing Honne wood frames of doors windows clerestory windows ventilators and other frames wrought framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps) but including cost of materials labour usage charges complete as per specifications.complete with all lead and lifts and as per the directions of Engineer in charge of the work. Cum 0.889 147877.25 0.000
94 Vol 2 PNo 104 ITNo 12.51 202324 KSRB 9 27.1 Fixing of door frame in an existing opening including embeeding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1 3 6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame making good the damages to walls and floor as required and disposal of the debries with lead upto 50 m. including cost of materials labour charges complete as per specifications.complete with all lead and lifts and as per the directions of Engineer in charge of the work No 13 1087.07 13
95 Vol 2 PNo 103 ITNo 12.36 202324 Providing and fixing in position Honne wood half panelled shutters at bottom and half glazed at top for window shutters with stiles and rails of 35mm. thick 75mm wide in two halves with panels of 25mm thick 3mm thick reeded glass for top panels fixed with wooden beading including cost of materials labour charges usage charges complete as per specifications. (excluding cost of fixtures)complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 2.73 7410.25 2.73
96 Vol 2 PNo 103 ITNo 12.36 202324 Providing and fixing in position Honne wood half panelled shutters at bottom and half glazed at top for window shutters with stiles and rails of 35mm. thick 75mm wide in two halves with panels of 25mm thick 3mm thick reeded glass for top panels fixed with wooden beading including cost of materials labour charges usage charges complete as per specifications. (excluding cost of fixtures)complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 7.1 7410.25 7.1
97 Vol 2 PNo 108 ITNo 12.83.2 202324 Providing and fixing factory made UPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance plus or minus1mm) with wall thickness 2.0 mm (plus or minus 0.2 mm) corners of the door frame to be Jointed with galvanized brackets and stainless steel screws joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (plus or minus 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer in charge 42x50 mm PVC Extruded sectioncomplete with all lead and lifts and as per the directions of Engineer in charge of the work M 24 255.97 12 12
98 Vol 2 PNo 111 ITNo 12.92 202324 Providing and fixing of Openable door made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) and lead free with gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile through out the openable frame. The frame having overall size of 60mm x 55mm with GI reinforcement of 1mm thickness and openable sash with overall size of 60mm x 102mm and GI reinforcement of 2mm thickness. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 34 mm. Windows shall be provided with 6mm plain float glass Standard hardware with 2D 3D hinge and Multi point locking system with Handle. Wall thickness of frame and sash shall be of 2mm 2.5mm. Maximum possible size – 900mm x 2400mm. (The cost is inclusive of all fixtures and separate charges for minor T and P's shall not be made)complete with all lead and lifts and as per the directions of Engineer in charge of the work. Sqm 5.67 6688.4 5.67
99 Vol 2 PNo 200 ITNo 20.34.1 202324 Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete. 125x70x4 mm (ordinary type) complete with all lead and lifts and as per the directions of Engineer in charge of the work Each 51 182.07 51
100 Vol 2 PNo 105 ITNo 12.62 202324 Providing and fixing chromium plated brass handles of 100 125 mm with necessary screws complete with all lead and lifts and as per the directions of Engineer in charge of the work. No 16 253.83 16
101 Vol 2 PNo 105 ITNo 12.60 202324 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws complete with all lead and lifts and as per the directions of Engineer in charge of the work. No 16 1126.69 16
102 Vol 2 PNo 105 ITNo 12.58 202324 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws complete with all lead and lifts and as per the directions of Engineer in charge of the work No 16 128.52 16
103 Vol 2 PNo 105 ITNo 12.59 202324 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI IS 3564 embossed on the body door weight upto 35 kg and door width upto 700 mm) with necessary accessories and screws complete with all lead and lifts and as per the directions of Engineer in charge of the work. No 16 1193.094 16
104 Vol 2 PNo 110 ITNo 12.90 202324 Providing and fixing of 3 track x 2 panel sliding windows made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile through out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass standard hardware and Multi point locking system with touch lock. Wall thickness of frame and sash shall be of 2mm 2.5mm. Maximum possible size – 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T and P's shall not be made)complete with all lead and lifts and as per the directions of Engineer in charge of the work. Sqm 60 7212.12 60
105 Vol 2 PNo 86 ITNo 11.31B 202324 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings wooden frames with rawl plugs screws complete with all lead and lifts and as per the directions of Engineer in charge of the work. Kg 600 195.99 300 300
106 Vol 2 PNo 85 ITNo 11.25 202324 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes channels plates etc. including welding grinding buffing polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete i c fixing the railing with necessary accessories and stainless steel dash fasteners stainless steel bolts etc. of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer in charge (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts bolts fasteners etc.) including cost of materials labour usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge Kg 262.5 605.12 150 112.5
107 Vol 2 PNo 149 ITNo 15.1 202324 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace Chajjas Sunken portion of WC Bathroom cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400 Percentage and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats at 1.6 kg m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer at 150 g m2 and protection with 120gsm Geo textile over the waterproofing membrane. The finished cost to include surface preparation making coving at Junction Bore Packing treatment of construction joints completely as per specification.complete with all lead and lifts and as per the directions of Engineer in charge of the work. Sqm 31.89 875.0070000000001 15 16.89
108 Vol 1 PNo 16 ITNo 2.5.2 202324 Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works and super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers well compacted using needle vibrators. The cost includes all lead and lifts cost of all materials quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatescomplete with all lead and lifts and as per the directions of Engineer in charge of the work. Cum 4.93 12380.79 4.93
109 Vol 1 PNo 16 ITNo 2.5.2 202324 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 0.5900000000000001 11652.51 0.59
110 Vol 1 PNo 16 ITNo 2.5.2 202324 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates including cost of materials labour usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge Cum 3.59 10924.23 3.59
111 Vol 1 PNo 16 ITNo 2.5.2 202324 Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works and super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers well compacted using needle vibrators. The cost includes all lead and lifts cost of all materials quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatescomplete with all lead and lifts and as per the directions of Engineer in charge of the work. Cum 4.03 10924.23 4.03
112 Vol 2 PNo 13 ITNo 6.6 202324 Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 5.0 conforming to IS 2222 in superstructure above plinth level in cement mortar 1 6 (1 cement 6 coarse sand) With Modular bricks including cost of all materials labour ascaffolding and usage charges of machinery and other incidental charges complete as per the direction of engineer incharge of work. Cum 33.99 12551.88 15 10 8.99
113 Vol 1 PNo 84 ITNo 2.11A 202324 Supplying fitting and placing TMT FE 550 550D Steel Reinforcement including cost of all materials machinery labour cleaning straightening cutting bending hooking laping welding joints tying with binding wire soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.complete with all lead and lifts and as per the directions of Engineer in charge of the work. Tonne 2.7 97836.81 1 1.7
114 Vol 1 PNo 16 ITNo 2.5.2 202324 Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works and super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers well compacted using needle vibrators. The cost includes all lead and lifts cost of all materials quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatescomplete with all lead and lifts and as per the directions of Engineer in charge of the work. Cum 0.18 10560.09 0.18
115 Vol 2 PNo 41 ITNo 8.2.1 202324 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1 4 (1 cement 4 fine sand) including rounding off corners wherever required smooth rendering providing and removing scaffolding including cost of materials labour curing complete as per specifications and as per directions of Engineer in charge. Sqm 123.19 316.88 60 63.19
116 Vol 2 PNo 41 ITNo 8.1.1 202324 Providing 12 mm cement plaster with cement mortar 1 4 (1 cement 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering providing and removing scaffolding including cost of materials labour curing complete as per specifications and as per directions of Engineer in charge Sqm 42.589999999999996 273.619 18 24.59
117 Vol 2 PNo 42 ITNo 8.8 202324 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1 5 (1 cement 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1 6 (1 cement 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering providing and removing scaffolding including cost of materials labour curing complete as per specifications and as per directions of Engineer in charge. Sqm 261.43 399.073 120 141.43
118 Vol 2 PNo 50 ITNo 8.51 202324 Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Sqm 304.02 108.15 120 120 64.02
119 Vol 2 PNo 60 ITNo 9.12.2 202324 Providing and laying vitrified floor tiles with thickness 9 10 mm in different sizes with water absorption less than 0.08 Percentage and conforming to IS 15622 of approved make in all colours and shades laid on 20mm thick cement mortar 1 4 (1 cement 4 coarse sand) jointing with grey cement slurry at 3.3 kg m2 including grouting the joints with white cement and matching pigments Size of Tile 600x600 mmcomplete with all lead and lifts and as per the directions of Engineer in charge of the work. Sqm 11.45 1233.99 11.45
120 Vol 2 PNo 64 ITNo 9.30 202324 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1 6 20 mm thick and joints finished with cement mortar 1 3 over existing cement concrete bed including cost of materials mortar labour curing complete as per specifications.complete with all lead and lifts and as per the directions of Engineer in charge of the work. Sqm 22.88 5760.0689999999995 22.88
121 Vol 2 PNo 45 ITNo 8.25 202324 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt dust mortar drops and foreign matter including preparing the surface even and sand paper smooth cost of materials labour complete as per specifications and as per directions of Engineer in charge Sqm 123.19 148.17 60 63.19
122 Vol 2 PNo 46 ITNo 8.31 202324 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade New work (Two coats applied at 1.43 ltr 10 m2 over and including priming coat of exterior primer applied at 2.20 kg 10 m2) with paint of approved quality to give an even shade after thoroughly brooming the surface to remove all dirt dust mortar drops and foreign matter including preparing the surface even and sand paper smooth cost of materials labour complete as per specifications and as per directions of Engineer in charge. Sqm 123.19 192.507 60 63.19
123 Vol 2 PNo 46 ITNo 8.33.1 202324 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Two coats applied on walls at 1.25 ltr 10 m2 over and including one coat of Special primer applied at 0.75 ltr 10 m2 with paint of approved quality to give an even shade after thoroughly brooming the surface to remove all dirt dust mortar drops and foreign matter including preparing the surface even and sand paper smooth cost of materials labour complete as per specifications and as per directions of Engineer in charge. Sqm 304.02 170.877 150 154.02
124 Vol 2 PNo 99 ITNo 12.11 202324 Providing Honne wood frames of doors windows clerestory windows ventilators and other frames wrought framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps) but including cost of materials labour usage charges complete as per specifications.complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 0.000 149327.03 0.129
125 Vol 2 PNo 104 ITNo 12.51 202324 KSRB 9 27.1 Fixing of door frame in an existing opening including embeeding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1 3 6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame making good the damages to walls and floor as required and disposal of the debries with lead upto 50 m. including cost of materials labour charges complete as per specifications.complete with all lead and lifts and as per the directions of Engineer in charge of the work. No 2 1097.72 2
126 Vol 2 PNo 103 ITNo 12.36 202324 Providing and fixing in position Honne wood half panelled shutters at bottom and half glazed at top for window shutters with stiles and rails of 35mm. thick 75mm wide in two halves with panels of 25mm thick 3mm thick reeded glass for top panels fixed with wooden beading including cost of materials labour charges usage charges complete as per specifications. (excluding cost of fixtures)complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 1.03 7482.89 1.03
127 Vol 2 PNo 108 ITNo 12.83.2 202324 Providing and fixing factory made UPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance plus or minus1mm) with wall thickness 2.0 mm (plus or minus 0.2 mm) corners of the door frame to be Jointed with galvanized brackets and stainless steel screws joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (plus or minus 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer in charge 42x50 mm PVC Extruded sectioncomplete with all lead and lifts and as per the directions of Engineer in charge of the work. M 12 258.48 12
128 Vol 2 PNo 111 ITNo 12.92 202324 Providing and fixing of Openable door made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) and lead free with gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile through out the openable frame. The frame having overall size of 60mm x 55mm with GI reinforcement of 1mm thickness and openable sash with overall size of 60mm x 102mm and GI reinforcement of 2mm thickness. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 34 mm. Windows shall be provided with 6mm plain float glass Standard hardware with 2D 3D hinge and Multi point locking system with Handle. Wall thickness of frame and sash shall be of 2mm 2.5mm. Maximum possible size – 900mm x 2400mm. (The cost is inclusive of all fixtures and separate charges for minor T and P's shall not be made)complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 3.78 6753.96 3.78
129 Vol 2 PNo 200 ITNo 20.34.1 202324 Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete. 125x70x4 mm (ordinary type)complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 4 183.85 4
130 Vol 2 PNo 105 ITNo 12.62 202324 Providing and fixing chromium plated brass handles of 100 125 mm with necessary screws complete with all lead and lifts and as per the directions of Engineer in charge of the work. No 2 256.31 2
131 Vol 2 PNo 105 ITNo 12.60 202324 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws complete with all lead and lifts and as per the directions of Engineer in charge of the work. No 2 1137.73 2
132 Vol 2 PNo 105 ITNo 12.58 202324 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws complete with all lead and lifts and as per the directions of Engineer in charge of the work No 2 129.78 2
133 Vol 2 PNo 105 ITNo 12.59 202324 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI IS 3564 embossed on the body door weight upto 35 kg and door width upto 700 mm) with necessary accessories and screws complete with all lead and lifts and as per the directions of Engineer in charge of the work. No 2 1204.79 2
134 Vol 2 PNo 110 ITNo 12.90 202324 Providing and fixing of 3 track x 2 panel sliding windows made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile through out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass standard hardware and Multi point locking system with touch lock. Wall thickness of frame and sash shall be of 2mm 2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T and P's shall not be made) complete with all lead and lifts and as per the directions of Engineer in charge of the work. Sqm 2.4 7282.82 2.4
135 Vol 2 PNo 86 ITNo 11.34B 202324 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings wooden frames with rawl plugs screws complete with all lead and lifts and as per the directions of Engineer in charge of the work. Sqm 24 197.91 24
136 Vol 2 PNo 85 ITNo 11.28 202324 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes channels plates etc. including welding grinding buffing polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete i c fixing the railing with necessary accessories and stainless steel dash fasteners stainless steel bolts etc. of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer in charge (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts bolts fasteners etc.) including cost of materials labour usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge. Sqm 262.5 611.05 80 150 32.5
137 Vol 2 PNo 149 ITNo 15.1 202324 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace Chajjas Sunken portion of WC Bathroom cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400 Percentage and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats at 1.6 kg m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer at 150 g m2 and protection with 120gsm Geo textile over the waterproofing membrane. The finished cost to include surface preparation making coving at Junction Bore Packing treatment of construction joints completely as per specification.complete with all lead and lifts and as per the directions of Engineer in charge of the work. Sqm 348.01 883.58 180 150 18.01
138 Vol 2 PNo 82 ITNo 11.16.2 202324 Providing and fixing Steel work in built up tubular (round square or rectangular hollow tubes etc.) trusses etc. including cutting hoisting fixing in position and applying a priming coat of approved steel primer including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials labour usage charges of machinery complete with all lead and lifts and as per the directions of Engineer in charge of the work. Kg 7812.64 158.98 7812.64
139 Vol 2 PNo 21 ITNo 7.5.1 202324 Providing and fixing corrugated G.S. sheet roofing including vertical curved surface fixed with polymer coated J or L hooks bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete as per design drawings (up to any pitch in horizontal vertical or curved surfaces) excluding the cost of purlins rafters and trusses and including cutting to size and shape wherever required as per the direction of Engineer in charge. 1.60 mm thick with zinc coating not less than 350 g m2complete with all lead and lifts and as per the directions of Engineer in charge of the work. Sqm 390.63 2231.14 251.632 51 52 10 10 9.998 6
140 Vol 1 PNo 16 ITNo 2.5.2 202324 Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works and super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers well compacted using needle vibrators. The cost includes all lead and lifts cost of all materials quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatescomplete with all lead and lifts and as per the directions of Engineer in charge of the work. Cum 3.05 10442.25 3.05
141 Vol 2 PNo 82 ITNo 11.16.2 202324 Providing and fixing Steel work in built up tubular (round square or rectangular hollow tubes etc.) trusses etc. including cutting hoisting fixing in position and applying a priming coat of approved steel primer including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials labour usage charges of machinerycomplete with all lead and lifts and as per the directions of Engineer in charge of the work. Sqm 9161.6 154.35 9161.6
142 Vol 2 PNo 38 ITNo 7.67.2 202324 Providingfabricating and fixing Profiled Poly Urethane insulated Roof(PUFSheet) having modular density 40kg m2 and size 1.06m width and 7.60m length sheets roof having external sheet of 0.5mm steel bottom sheet of 0.40mm steel with powder coated finish. The precoated sheet shall be of minimum 240MPa steel conforming to IS 14246 1995 and shal have zinc coating with minimum 120gsm as per IS 277 1992.The roofing system shall have suitable water proof over lapping arrangments and GRIHA ceritifed.The fasting shall be of self tapping screws of required length with PVC head along with washer pre painted aluminium cap unit with build in seal arrangments. The entire roof shall be firmly fastened to the existng frame including all lead and lifts loading and unloading usage charges of machinery and equipments transportation chargeslabour charges and all other incidental charges etc.complete as per standard technical detailed specifications and as directed by the Engineer in charge of the work. 1.60 mm thick with zinc coating not less than 350 g m2 50mm thicknesscomplete with all lead and lifts and as per the directions of Engineer in charge of the work. Sqm 322 2724.75 322
143 Vol 3 PNo 74 ITNo 8.42.7 202324 Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway Sidewalls and gutters fixed with CM 1 3 fixed and finsihed in line as per direction of Engineer in charge. (The cost of PCC shall be paid extra) 300 x 300 x 150 mm sizecomplete with all lead and lifts and as per the directions of Engineer in charge of the work. M 163 394.8 50 113
144 Vol 2 PNo 63 ITNo 8.42.7 202324 Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M 30 grade made of C and D waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand filling the joints with fine sand etc. all complete as per the direction of Engineer in charge. Sqm 609.33 840 250 250 109.33
145 Vol 2 PNo 21 ITNo 7.5.1 202324 Providing and fixing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete as per design drawings.0.63 mm thick with zinc coating not less than 275 g m2complete with all lead and lifts and as per the directions of Engineer in charge of the work M 23 670.95 23
146 Vol 1 SR 202122 PNo 5 ITNo 1.6.1 Earth work excavation for pipelines cables by Manual means upto 600 mm trench width as per drawing and technical specifications including setting out shoring strutting barricading caution lights removal of stumps and other deleterious matter including dressing of excavated surfaces disposing off or leveling the excavated earth or sorting and stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches plinth sides of foundations etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour tools usage and other appurtenances required to complete the work.In all kinds of soils. Depth upto 1.50m complete with all lead and lifts and as per the directions of Engineer in charge of the work. Cum 24.3 508.2 24.3
147 Vol 5 SR 202425 PNo A45 ITNo 684 PVC pipes of 8 Kg cm2 for 200mm complete with all lead and lifts and as per the directions of Engineer in charge of the work. M 30 983.85 30
148 Vol 5 SR 202425 PNo A45 ITNo 684 PVC pipes of 8 Kg cm2 for 160mmcomplete with all lead and lifts and as per the directions of Engineer in charge of the work. M 109.5 639.45 109.5
149 Vol 5 SR 202425 PNo A45 ITNo 683 PVC pipes of 8 Kg cm2 for 110mm complete with all lead and lifts and as per the directions of Engineer in charge of the work. M 89.4 297.15 89.4
150 Vol 2 SR 202122 PNo 120 ITNo 13.22.1.1 Providing and fixing PTMT grating of approved quality and colour.Circular type 100 mm nominal diacomplete with all lead and lifts and as per the directions of Engineer in charge of the work. M 50 43.05 50
151 Vol 2 SR 202122 PNo 128 ITNo 14.29 Providing and fixing 100 mm sand cast Iron grating for gully trap. complete with all lead and lifts and as per the directions of Engineer in charge of the work. No 25 49.35 25
152 Vol 2 SR 202425 PNo A34 ITNo 735 S.C.I. gully or nahani grating 100 mm diacomplete with all lead and lifts and as per the directions of Engineer in charge of the work. No 70 33.6 70
153 Vol 2 SR 202122 PNo 117 ITNo 13.2.1 Providing and fixing brass bib cock of approved quality 15 mm nominal bore complete with all lead and lifts and as per the directions of Engineer in charge of the work. No 35 300.3 35
154 Vol 2 SR 202122 PNo 121 ITNo 13.28.3 Providing and fixing PTMT extension nipple for water tank pipe fittings of approved quality and colour. 25mm nominal bore weighing not less than 62 g complete with all lead and lifts and as per the directions of Engineer in charge of the work. No 75 110.25 75
155 Vol 2 SR 202122 PNo 121 ITNo 13.27.2 Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts collar and bush of approved quality and colour. 15 mm nominal bore with 45 cm length complete with all lead and lifts and as per the directions of Engineer in charge of the work. No 80 121.8 80
156 Vol 2 SR 202122 PNo 117 ITNo 13.1.1 Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee including cutting and threading the pipe etc. complete 25 to 40 mm nominal borecomplete with all lead and lifts and as per the directions of Engineer in charge of the work. No 80 638.4 80
157 Vol 2 SR 202122 PNo 117 ITNo 13.3.1 Providing and fixing brass stop cock of approved quality 15 MM Nominal bore complete with all lead and lifts and as per the directions of Engineer in charge of the work. No 35 313.95 35
158 Vol 2 SR 202122 PNo 117 ITNo 13.4.1 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) complete with all lead and lifts and as per the directions of Engineer in charge of the work. No 15 576.45 15
159 Vol 2 SR 202122 PNo 117 ITNo 13.6.1.1 Providing and fixing gun metal non return valve of approved quality (screwed end) 25 mm nominal bore Horizontal Typecomplete with all lead and lifts and as per the directions of Engineer in charge of the work. No 10 651 10
160 Vol 5 SR 202425 PNo 113 ITNo 10.1.1 Providing PVC ringtite pipes conforming to IS 4985 2000 with latest amendments and conveying to worksite rolling and lowering into trenches laying true to line and level and perfect linking at joints testing and commissioning including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type with all labour with all lead and lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For PVC pipes 25mm dia 10 kg sqcm and class 5 complete with all lead and lifts and as per the directions of Engineer in charge of the work. M 208 50.4 208
161 Vol 5 SR 202425 PNo 116 ITNo 10.8.1 Supplying of special moulded variety PVC couplers as per IS 7834 1987 and fabricated as per IG124 1984 with ISI mark and with its latest amendments to walk site 25mm dia PVC couplerscomplete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 74 12.6 74
162 Vol 5 SR 202425 PNo 117 ITNo 10.9.1 Supply and delivery at site special moulded variety PVC elbows as per IS 7834 1987 and fabricated as per IG124 1984 with ISI mark with its latest amendments 25 mm dia PVC Elbowscomplete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 25 16.8 25
163 Vol 5 SR 202425 PNo 117 ITNo 10.10.1 Supply and delivery at site special moulded variety PVC tee as per IS 7834 1987 and fabricated as per IG124 1984 with ISI mark with its latest amendments 25 mm dia PVC Teecomplete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 20 22.05 20
164 Vol 5 SR 202425 PNo 41 ITNo 2.79.2 Supply of PPR Gate valve confirming to IS 15801 2008 and DIN Standards 8077 8092 PPR Gate valve 25mm complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 8 435.75 8
165 Vol 2 SR 202425 PNo 123 ITNo 13.34A Providing and fixing rectangular high density polyethylene water storage loft tank with cover conforming to ISI 12701 colour of opaque white or as approved by Engineer in charge. The rate includes making necessary holes for inlet outlet and over flow pipes. The base support i c fittings and fixtures for tank shall be paid separately.complete with all lead and lifts and as per the directions of Engineer in charge of the work. L 4000 9.45 4000
166 Vol 5 SR 202425 PNo 155 ITNo 13.3 Supply and delivery at site Accessories for Single Phase pumpset like SS Groove NipplesSS Studs and NutsScrew Clips and water proof Insulation Tape etc complete with ISI mark complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 1 4725 1
167 Vol 2 SR 202425 PNo 137 ITNo 14.35.1 Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat and lid fixed with C.P. brass hinges and rubber buffers 10 litre low level flushing cistern with fitting and brackets 40 mm flush bend 20 mm over flow pipe with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets cutting and making good the walls and floors wherever required White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend.complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 4 9063.6 4
168 Vol 2 SR 202122 PNo 131 ITNo 14.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid 10 litre low level white vitreous china flushing cistern and C.P. flush bend with fittings and C.I. brackets 40 mm flush bend overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 12 6275.85 12
169 Vol 2 SR 202122 PNo 131 ITNo 14.4.1 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete including painting of fittings and brackets cutting and making good the walls and floors wherever required One urinal basin with 5 litre white P.V.C. automatic flushing cistern Schedule of rates complete with all lead and lifts and as per the directions of Engineer in charge of the work. Unit 9 4676.7 9
170 Vol 2 SR 202122 PNo 136 ITNo 14.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Schedule of rates complete with all lead and lifts and as per the directions of Engineer in charge of the work. Unit 12 1281 12
171 Vol 2 SR 202122 PNo 132 ITNo 14.7.1 Providing and fixing wash basin with C.I. brackets 15 mm C.P. brass pillar taps 32 mm C.P. brass waste of standard pattern including painting of fittings and brackets cutting and making good the walls wherever require White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps Schedule of rates complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 12 3236.1 12
172 Vol 2 SR 202425 PNo 201 ITNo 16.40.3 Providing and constructing of Machinehole chambers conical in shape at top with CC 1 3 6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15m alround the chamber and brick masonry in C.M 1 4 plaster with bricks of approved quality and CM plaster 1 3 proportion 12mm thick inside and outside except for the conical surface outside where the thickness of plaster shall be 20 mm thick with 1 to 6 slope in the concrete towards the central drain finished smooth and fixing of pipes in CC 1 2 4 with graded metal of 20 mm and down size including Providing and fixing SFRC Machinehole frame and cover confoming to IS 12592(Part I) 1988 and IS 12592(Part II) 1991 with latest amendments in CC 1 2 4 Providing and fixing of plastic foot steps staggered at 30cms apart as directed watering curingbarricading danger lighting pouring tar over M.H. frame and cover cost of tar shoring strutting dewatering engraving Machinehole No. on the inner and outer conical surface etc. as per the drawing with all lead and lift for various diameters and depths noted below. With Table Moulded Bricks and Medium Duty cover and frame.For 1.2m dia Constructing Table Moulded Bricks Machinehole 1.2 m internal dia 3.0M depth and Medium duty SFRC cover and frame complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 1 74631.9 1
173 CP 1 ITNO 1.1.1 ELE SR Supplying heavy gauge PVC conduit pipe . mm dia..mm thick confirming to IS 2509 with suitable size bends metal PVC Junction boxes adhesive paste etc. and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures run with 18SWG GI fish wire wherever necessary.19 20 mm dia 2 mm thick complete with all lead and lifts and as per the directions of Engineer in charge of the work M 225 69.3 225
174 CP 1 ITNO 1.1.2 ELE SR Supplying heavy gauge PVC conduit pipe mm dia..mm thick confirming to IS 2509 with suitable size bends metal PVC Junction boxes adhesive paste etc. and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures run with 18SWG GI fish wire wherever necessary.25 mm dia 2 mm thick complete with all lead and lifts and as per the directions of Engineer in charge of the work. M 315 81.9 315
175 CP 1 ITNO 1.2.1 ELE SR Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends metal junction boxes adhesive paste etc.by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary.19 20 mm dia 2 mm thick complete with all lead and lifts and as per the directions of Engineer in charge of the work. M 135 71.4 135
176 CP 1 ITNO 1.2.2 ELE SR Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends metal junction boxes adhesive paste etc.by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary.25 mm dia 2 mm thick complete with all lead and lifts and as per the directions of Engineer in charge of the work. M 165 82.95 165
177 CP 1 ITNO 1.5.1 ELE SR Supplying and fixing PVC metal conduit Deep junction box 19 20 mm deep Junction box complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 45 51.45 45
178 CP 1 ITNO 1.5.2 ELE SR Supplying and fixing PVC metal conduit Deep junction box 25 mm deep Junction box complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 60 58.8 60
179 CP 1 ITNO 1.12 ELE SR Supplying And Fixing Metal Fan Box with Round Hook complete with all lead and lifts and as per the directions of Engineer in charge of the work. No 31 122.85 31
180 Code180 Supply and laying of under floor(concealed) race ways manufactured from1.5mm thick cover and base (including partitions for multi compartment raceways) zero spangle pre galvanized sheet steel with 275GSM(36.67microns) coating mass cover and base MIG welded together. the length of raceways shall be2.5meters per length with single accessories acting as duct connector including fastening clamps and vertical access boxes and with all required connected accessories complete and load bearing capacity in line with EN 50085 2 2 50 x 38 x 2500mm 1 compartment complete with all lead and lifts and as per the directions of Engineer in charge of the work. M 240 662.55 240
181 CP 2 ITNO 2.2.1 ELE SR Supplying and wiring adopting loop system in existing PVC Conduit casing capping using 2x1.5Sqmm (Phase and Neutral) and 1x1.0 Sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS 694 and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet gang box the other end of the wires shall be terminated with sufficient loose length in a wood PVC round block. complete for each outlet.Short point upto 3Mtr from tapping point to out let via switch complete with all lead and lifts and as per the directions of Engineer in charge of the work. Point 43 299.25 43
182 CP 2 ITNO 2.2.2 ELE SR Supplying and wiring adopting loop system in existing PVC Conduit casing capping using 2x1.5Sqmm (Phase and Neutral) and 1x1.0 Sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS 694 and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet gang box the other end of the wires shall be terminated with sufficient loose length in a wood PVC round block. complete for each outlet.Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch complete with all lead and lifts and as per the directions of Engineer in charge of the work. Point 43 413.7 43
183 CP 2 ITNO 2.2.3 ELE SR Supplying and wiring adopting loop system in existing PVC Conduit casing capping using 2x1.5Sqmm (Phase and Neutral) and 1x1.0 Sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS 694 and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet gang box the other end of the wires shall be terminated with sufficient loose length in a wood PVC round block. complete for each outlet.Long point above 6Mtr upto 10Mtr from tapping point to out let via switch complete with all lead and lifts and as per the directions of Engineer in charge of the work. Point 62 598.5 62
184 CP 2 ITNO 2.3.1 ELE SR Wiring for lighting power circuit using one of FRLS PVC insulated 1100V grade multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694 20101 mm2 complete with all lead and lifts and as per the directions of Engineer in charge of the work. M 540 19.95 540
185 CP 2 ITNO 2.3.2 ELE SR Wiring for lighting power circuit using one of FRLS PVC insulated 1100V grade multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694 20101.5 mm2 complete with all lead and lifts and as per the directions of Engineer in charge of the work. M 600 27.3 600
186 CP 2 ITNO 2.3.3 ELE SR Wiring for lighting power circuit using one of FRLS PVC insulated 1100V grade multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694 20102.5 mm2 complete with all lead and lifts and as per the directions of Engineer in charge of the work. M 900 44.1 900
187 CP 2 ITNO 2.3.4 ELE SR Wiring for lighting power circuit using one of FRLS PVC insulated 1100V grade multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694 2010 4 mm2 complete with all lead and lifts and as per the directions of Engineer in charge of the work. M 540 66.15 540
188 CP 2 ITNO 2.3.5 ELE SR Wiring for lighting power circuit using one of FRLS PVC insulated 1100V grade multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694 2010 6 mm2 complete with all lead and lifts and as per the directions of Engineer in charge of the work. M 540 96.6 540
189 CP 3 ITNO 3.4.1 ELE SR Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick Stone C.C wall 1 2 Way complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 6 144.9 6
190 CP 3 ITNO 3.4.2 ELE SR Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick Stone C.C wall 3 Way complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 9 166.95 9
191 CP 3 ITNO 3.4.3 ELE SR Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick Stone C.C wall 6 Way complete with all lead and lifts and as per the directions of Engineer in charge of the work Each 9 231 9
192 CP 3 ITNO 3.4.4 ELE SR Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick Stone C.C wall 8 Way complete with all lead and lifts and as per the directions of Engineer in charge of the work Each 21 274.05 21
193 CP 3 ITNO 3.4.5 ELE SR Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick Stone C.C wall 10 12 Way complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 24 334.95 24
194 CP 3 ITNO 3.5.1 ELE SR Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws bolts nuts etc. complete on the existing metal PVC box. 3 Module complete with all lead and lifts and as per the directions of Engineer in charge of the work Each 6 143.85 6
195 CP 3 ITNO 3.5.2 ELE SR Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws bolts nuts etc. complete on the existing metal PVC box. 3 Module complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 9 169.05 9
196 CP 3 ITNO 3.5.3 ELE SR Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws bolts nuts etc. complete on the existing metal PVC box. 6 Module complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 9 245.7 9
197 CP 3 ITNO 3.5.4 ELE SR Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws bolts nuts etc. complete on the existing metal PVC box. 8 Module complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 21 298.2 21
198 CP 3 ITNO 3.5.5 ELE SR Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws bolts nuts etc. complete on the existing metal PVC box. 10 12 Module complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 24 361.2 24
199 CP 3 ITNO 3.6.1 ELE SR Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6A One Way Switch complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 90 107.1 90
200 CP 3 ITNO 3.6.2 ELE SR Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6A Two Way Switch complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 15 174.3 15
201 CP 3 ITNO 3.6.4 ELE SR Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293 Stepped Fan Regulator Two Module complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 31 374.85 31
202 CP 3 ITNO 3.6.8 ELE SR Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293 16A One Way Switch complete with all lead and lifts and as per the directions of Engineer in charge of the work Each 12 189 12
203 CP 3 ITNO 3.6.11 ELE SR Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6 16A Universal Socket complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 60 247.8 60
204 CP 3 ITNO 3.6.13 ELE SR Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293 RJ45 I.O Outlet Cat 6 complete with all lead and lifts and as per the directions of Engineer in charge of the work Each 330 353.85 330
205 CP 3 ITNO 3.6.13 ELE SR Supplying and fixing 32A security and energy saving DP switch with key tag suitable to operate on 230 V 50HZ AC supply and completely wired on existing box. complete with all lead and lifts and as per the directions of Engineer in charge of the work Each 12 678.3 12
206 CP 3 ITNO 3.6.10 ELE SR Supplying And fixing replacing of 6 16 32A electrical accessories on existing switch board.6A Bakelite Ceiling Rose complete with all lead and lifts and as per the directions of Engineer in charge of the work. No 90 81.9 90
207 CP 3 ITNO 3.14.6 ELE SR Supplying And fixing replacing of 6 16 32A electrical accessories on existing switch board.6A Batten Holder complete with all lead and lifts and as per the directions of Engineer in charge of the work. No 69 77.7 69
208 CP 5 ITNO 5.7.4 ELE SR Supplying and fixing of Porcelain fuse channel with cut out on existing wooden panel using necessary nuts bolts and washers 100 A complete with all lead and lifts and as per the directions of Engineer in charge of the work. No 4 725.55 4
209 CP 5 ITNO 5.14.7 ELE SR Supplying and fixing Moulded Case Circuit Breaker (MCCB)over the existing wood panel board using necessary screwsbolts nuts necessary phase separatorshandle and wiring complete. Protection of Overload and Short circuit with adjustable thermal magnetic release Micro processor release shall have Earth Fault as per IS IEC 60947 2 . (Icu equal 100 Percentagelcs). In 4PMCCB all Poles should have protection for Short Cicrcuit Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non Priority loads must be available in the MCCB. MCCB shall be provided with double insulation(insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. FOUR Pole 100 A 25 kA complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 1 8911.35 1
210 CP 5 ITNO 5.16.3 ELE SR Supplying and fixing regular MCCB distribution Panel confirming to IS IEC61439 3 and IK09 tested as per IS IEC62262 with minimum IP43 protection provided with Polyurethane (PUR) gasket with suitable earthing system onwall wood board flush mounting using required cl A bolts nuts etc.with provision for fixing of suitable type capacity MCCB's as an incomer for 3phase Double door with necessary busbar completely wired to use on 440V 3phase 4wire powder coated painting etc. complete with a provision for fixing of single three phase suitable capacity MCB's as outgoings confirming to IS IEC 60898 2.12 Way complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 4 16305.45 4
211 CP 5 ITNO 5.17.4 ELE SR Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C'Type curve indicator ON OFF energy cross 3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6 32 A DP complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 13 775.95 13
212 CP 5 ITNO 5.17.7 ELE SR Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C'Type curve indicator ON OFF energy cross 3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6 32 A TPN complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 7 1802.85 7
213 CP 5 ITNO 5.17.9 ELE SR Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C'Type curve indicator ON OFF energy cross 3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 50 63 A TPN complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 6 3242.4 6
214 CP 5 ITNO 5.18.3 ELE SR Supplying and fixing regular MCB distribution boards on wall ood board flush mounting using required clamps bolts nuts etc. with provision for fixing suitable type capacity MCB's single phase 3 phase single door with powder coated painting Made out of 14SWG MS enclosure.I Single Door 8 Way SP and N complete with all lead and lifts and as per the directions of Engineer in charge of the work Each 4 1566.6 4
215 CP 5 ITNO 5.19.1 ELE SR Supplying fixing and wiring Residual current circuit breaker (RCCB) 240 450V upto 300mA sensitivity on existing wood panel board.16A 25A 2 pole complete with all lead and lifts and as per the directions of Engineer in charge of the work Each 4 4490.85 4
216 CP 5 ITNO 5.19.4 ELE SR Supplying fixing and wiring Residual current circuit breaker (RCCB) 240 450V upto 300mA sensitivity on existing wood panel board. 32 40A 4 pole complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 4 5404.35 4
217 CP 5 ITNO 5.21 ELE SR Supplying fixing and wiring earth leakage relay with core balanced current transformer suitable forsingle phase 50HZ AC with latest microcontroller based digital readout of percentage leakage current programmable delay auto manual reset facility suitableto mount on DIN rail flush mounting on panel board. complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 1 9717.75 1
218 CP 5 ITNO 5.22 ELE SR Supplying fixing and wiring 0 to 600V 96x96mm AC Voltmeter on existing panel wood board. complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 1 474.6 1
219 CP 5 ITNO 5.25 ELE SR Supplying fixing and wiring 0 to 100A Direct Reading AC analog type Ammeter complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 1 550.2 1
220 CP 5 ITNO 5.27 ELE SR Supplying fixing and wiring rotary selector switch suitable for Ammeter complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 1 210 1
221 CP 5 ITNO 5.28 ELE SR Supplying fixing and wiring rotary selector switch suitable for Voltmeter complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 1 168 1
222 CP 5 ITNO 5.29 ELE SR Supplying fixing and wiring 3 Phase Digital Ammeter Voltmeter complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 1 1496.25 1
223 CP 5 ITNO 5.30 ELE SR Supplying fixing and wiring Electronic Trivector Meter(ETV) 5to 32 63A three phase 4wire whole current class 1Accuracy Energy Meter. complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 1 5990.25 1
224 CP 5 ITNO 5.37 ELE SR Supplying fixing and wiring heavy duty low voltage capacitors conforming to IS2834.3 phase400 440Vgrade for power factor improvement of rotating machineries like induction motor. complete with all lead and lifts and as per the directions of Engineer in charge of the work. KVAR 5 504 5
225 CP 5 ITNO 5.38 ELE SR Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230 440VAC. 50 HZ 12 24V D.C. complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 4 540.75 4
226 CP 5 ITNO 5.41.2 ELE SR Supplying and fixing angle iron frame work fabricated out of M.S. angle iron..and M.S.Flat......with boltswashers etc.and painted with 2 coats of red oxide and then two coats of approved paint. 50 x 50 x 6 mm complete with all lead and lifts and as per the directions of Engineer in charge of the work. M 5 414.75 5
227 CP 5 ITNO 5.44.3 ELE SR Supply and Installation Fixing Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid shock proof IP65(Weather Proof) rust proof dust proofwater proofcorrosion proof having internally Embedded gasket on both lid and flap suitable to fix Single Phase Three Phase Energy Meter insuitable base plate and having a provision for Fuse MCB cut out with suitable transparent hinged flap opening for operating MCB along with complete tamper proof SEALING facility.300 mm x 600 mm x 170 mm complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 2 7210.35 2
228 CP 6 ITNO 6.1 ELE SR Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50HZ AC Supply complete 12 inch Sweep (300 mm) complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 16 3117.45 16
229 CP 6 ITNO 6.4.1 ELE SR Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS 374 19 and also comply with IS 1709 1984 with latest amendment Rated voltage 220V 50HZ Rated power upto 35W plus 10 Percentage Rated current As per IS 374 19 Rated power factor 0.9 lagging(min) Rated speed 350 plus 10 Percentage RPMRated air delivery210 plus 10 Percentage Cubic Meter Minimum Rated service value 6.2CMM W Three Blades of blade leaf 1.05mm thick Aluminium Alloy sheet Class B motor insulation Bearing Two ball bearingsTop 6202Bottom6201as per IS specification Motor winding. Temp rise Shall not exceed 75deg Cover and ambient of 40 0C by resistance method at 245V Insulation resistance Shall not be less than Two Mega Ohms (2MOhms) Leakage current Should not exceed 210Micro AmpPower input W and currentAir Delivery and Fan Speed as per IS 374 2019 with latest amendment 2 year manufacturer Warranty. (BLDC fans) 48 inch Sweep 5 Star (1200 mm) complete with all lead and lifts and as per the directions of Engineer in charge of the work Each 31 4518.15 31
230 CP 6 ITNO 6.7.2 ELE SR Supplying ......TR split Air conditioners suitable for operation on A C supply single phase 50HZ 230V with hermetically sealed compressor with air cooled condensermotor capacitor and start run capacitors relay and overload protector internal unit with one indoor and one outdoor unit The condenser unit will be placed outside the room on the terrace to avoid noise including standard length of suitable size copper tubing covered with insulationtube. (Highwall chorded cordless) suitable capacity 3 core sheathed PVC copper cable and a battery operated wireless remote unit 1.5 Ton capacity complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 11 50067.15 11
231 CP 6 ITNO 6.12 ELE SR Installation charges for split type air conditioner with allied works for one indoor and one outdoor unit is tobe mounted on suitable Angle Iron support upto 3.0 Ton split cassette type A C. complete with all lead and lifts and as per the directions of Engineer in charge of the work Each 11 3333.75 11
232 CP 10 ITNO 10.1.4 ELE SR Supplying installing testing and commissioning of Diesel Generator set with following specifications. Power rating as per standard reference condition as perBS5514 ISO3046 ISO8528 and IS 1002 ISO 3046 Generator set specifications Engine Diesel generating set are rated at1500RPM and conform to ISO8528 specifications. The engines are radiator cooled four stroke and multi cylinder conforming to ISO 3046. The scope of supplyi ncludesElectrical starter motor 12VDC Battery charging alternator Bosch fuel system with mechanical governor A1 Class. Spinon lubeoil filter Spinondual fuel filter with water separator Turbocharger Charge air cooler Silencer Hospital grade Dry type aircleaner Shutoff coil Flywheel and fly wheel housing First fill of lube oil and coolant Safety for low lube oil pressureSafety for high water temperature Permissible overload of 10percent for one hour in 12 hours of operation Capacity of Fuel Tank Fuel tank suitable for 8 hours of operation Alternator Alternator is suitable for operation at 1500 RPM415 V 0.8 pf lag suitable for 50 HZ 3 phase 4 wire systems conforming to IS IEC 600341. The Alternator is brush less type screen protected revolving field self excited self regulated through an AVR. The alternator shall have Plus or minus 1.0percent Voltage regulation max in static conditions IP 23 protections with insulation class F andH Mounting arrangement Engine and alternator are mounted on a common MS fabricated base frame with AVM pads Control Panel The control panel is manufactured with 14 16 gauge CRCA sheet and is powder coated for weatherproof and long lasting finish. The control panel consists of the following parts PS0500 Controller Aluminium bus bars with suitable capacity within outgoing terminals Indicating lA for Load On and Set Running Instrument fuses duly wired and ferruled MCCB of suitable rating with overload and short circuit protections Genset Controller microprocessor based generator set monitoring and control system. The control provides a simple operator interface to the generator set manual and remote start stop control shutdown fault indication and an LCD hour counter. The integration of all functions into a single control system provides enhanced reliability and performance compared to conventional generator set control systems. This control has been designed and tested to meet harsh environment in which gensets are typically applied. Features Functions protections 16 character x 2 line alphanumeric LCD display with LED Backlight. Operator interface Provide a record of most recent fault conditions. Fault history stored in the control non volatile memory Provide Alternator Data. Voltage 1 ph or 3 ph line to line and line to neutral voltage Current 1 ph or 3 ph kVA 3 ph and total Frequency Provide Engine Data Starting battery voltage Engine running hours Engine Temp Engine oil pressure Control includes provision for Service adjustment and calibration of DG control functions Voltage frequency selection Configurable input and output set up Meter calibration Engine controls Power Start operates on 12 VDC batteriesAuto start mode accepts a ground signal from remote devices to automatically start the DG set The remote start will also wake up the control system from sleep mode Engine Starting The control system supports automatic engine starting Primary and back up start disconnects are achieved by battery charging alternator feedback or main alternator output frequency. Controller provide configurable time delay of 0300 sees to start after remote start signal and time delay of 0 600secs prior to shut down after stop signal. Sleep mode increase battery life 30KVA 24kw complete with all lead and lifts and as per the directions of Engineer in charge of the work. Set 1 479920.35 1
233 CP 10 ITNO 10.2.1 ELE SR Supply Erection testing and commissioning of AMF panel suitable for15 KVA to 30 KVA DG set. The panel is of cubical type base floor mounting control panel with hinged doors undrilled bottom gland plate aluminium Bus Bar with the accommodation for .....A 4 pole contactor for alternator with thermal O L relay..... A 4 pole contactor for mains HRC fuse for short circuit protection Microprocessor based AMF module with supply failure timer Restoration timer 3 impulse automatic engine start stop logic Mains generator voltage ....capacity bypass switch and frequency sensing PCC 1301controller with water temperature Lube oil pressure engine speed Voltage ampere Frequency kVA Running hour count No of starts Fault indication over under speed Fails to start Low oil pleasure High engine temperature Under over voltage over current Earth fault relay with indications for Mains on Load on Mains Battery charger on Push buttons AMF module by pass Mode Battery charger unit with inbuilt Auto Manual and Flat Boost facility. The complete set shall have sufficient safety and adhere to NEC NBC 2016 IEC CPWD specifications PCB norms and KSGEI Acts and Rules. complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 1 61646.55 1
234 CP 11 ITNO 11.2.1 ELE SR Supplying and fixing retrofit type PL LED Lamp ...... W LED linear source with CCT 6500 degree K CRIgrater than 70 Percentage. efficacy grater than80 lumen per W lifegrater than 25000 burning hours and Compliance to IS 10322 IEC 60598 LM 79 and LM 80. The LED are driven by HF electronic driver integrated in the system with PF grater than0.95 power loss should less than 5 Percentage of lamp Wage. short circuit and open circuit protection to be integrated in the circuit THD less than 20 Percentage Life as per LM 79. The operating input voltage should be between 130 to275 V. Tested by NABL CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.8 9 W complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 15 654.15 15
235 CP 11 ITNO 11.3.2 ELE SR Supplying of .....feet PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours and 70 Percentage lumen maintenance with CRI grater than 80. Power Input 220 240V at 50 60HZ and Power factor grater than0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.LED light fitting 1 x 4ft 20 22 W complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 98 724.5 98
236 CP 11 ITNO 11.6.2 ELE SR Supplying of recess mounting non integral type.. LEDw luminaire comprising of pressure decast extruded aluminium housing with spring loaded false ceiling clamps Power LEDs with CCT 6500degree KCRIgrater than70 Percentage. efficacygrater than100lumen per W 120 degree beam spread lifegrater than 25000 burning hours and Compliance to IS10322 IEC60598 LM79 and LM80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level LEDs are driven by HF electronic driver integrated in a separate control gear assembly. with PFgrater than0.95 power loss shouldless than5 Percentageof lamp Wage.short circuit and open circuit protection to be integrated in the circuit THD less than 20 Percentage Life as per LM79. The operating input voltage should be between 130 to 275V. BIS Approved and Tested by NABL CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition LED modular down light 2'x2ft36 W complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 18 4780.65 18
237 CP 12 ITNO 12.8.5 ELE SR Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material delivering superior light output Rated life Burning Hrs 50000 hr at Lumen Maintenance of 70 Percentage maximum light intensity should be between 60 degrees to 70 degrees. CCT grater than 5500K IP66 optical and electrical compartment and impact resistance of complete luminaire grater than IK08. Power Factor grater than0.9 with mains Surge Protection Min 5KV along with Over voltage Overload short circuit miss wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm.Universal Voltage driver to operate wide voltage range from 100V to 270V 50 60HZ application. Compliance to IS 10322 IEC 60598 LM 79 and LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiencygrater than1301m w nominal CRI grater than75. Luminaire manufacturer should have in house facility accredited by NABL CPRI and any Government certified agency and Design and Development facility certified by ISO 9001 2008. Housing with supplier word mark name shall be Engraved Embossing on the die cast housing Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer and Cree Nichia Lumileds Osram make LED Source.LED Streetlight 120W complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 1 10563 1
238 CP 11 ITNO 11.9.2 ELE SR Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate clear glass material delivering superior light output Rated life Burning Hrs 50000 hr at Lumen Maintenance of 70 Percentage CCT grater than 5500K IP 66 optical and electrical compartment and impact resistance of complete luminaire grater than IK08. Power Factor grater than0.9 with mains Surge Protection Min 5KV along with Over voltage Overload short circuit miss wiring protection. Compatible for pole mauling with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100 V to 270V 50 60HZ application. Compliance to IS 10322 IEC 60598 LM 79 and LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ....... W System Power consumption. LED Efficiencygrater than 1301m w nominal CRI grater than75.Luminaire manufacturer should have in house facility accredited by NABL CPRI and any Government certified agency and Design and Development facility certified by ISO 9001 2008. Housing with supplier word mark name shall be Engraved Embossing on the die cast housing Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer and Cree Nichia Lumileds Osram make LED Source.LED Floodlight 100W complete with all lead and lifts and as per the directions of Engineer in charge of the work Each 4 9960.3 4
239 CP 12 ITNO 12.2.3 ELE SR Supplying and fixing one of 230V Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote. complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 9 1249.5 9
240 Code240 Supplying fixing wiring earth electrode for grounding conduitsI.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm allround the pipe to complete depth. The connection from the pipe to the conduit etc. is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts nuts washers and check nuts etc. the pipe shall have 16 through holes of 12 mm dia complete with all lead and lifts and as per the directions of Engineer in charge of the work. No 9 3685.5 9
241 Code241 Supplying fixing and wiring earth electrode for grounding of lifts transformersDG sets etc.using 40mm dia 2.9mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode.The funnel should be enclosed in a CC chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150 mm all round with alternate layers of salt and charcoal from the bottom of the CC chamber.The connection from the electrode is to be established through GI strip using GI bolts and nuts complete with all lead and lifts and as per the directions of Engineer in charge of the work. No 6 4468.8 6
242 Code242 GI strips for grounding connections using necessary fixing materials as required. 25 x 3 mm GI strip complete with all lead and lifts and as per the directions of Engineer in charge of the work. M 60 86.1 60
243 Code243 Copper strips for grounding connections using necessary fixing materials as required. 25 x 3 mm Copper strip complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 20 598.5 20
244 Code244 Supplying and Fixing of........mm dia class A GI pipe bracket upto 2 ms long bent at suitable angle and fixing to this bracket street light fitting of all capacities to GI or GI or rail or RCC pole wall using suitable clamps bolts and nuts and wiring using suitable capacity wires.Using 32mm dia G.I.Pipe complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 4 1097.25 4
245 Code245 Fixing halogen metal halide SVL IL LED floodlight fitting over existing pole wall ceiling including clamps bolts nuts and wiring using suitable capacity wires complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 8 170.1 8
246 Code246 Fixing all types and all capacities of fluorescent false ceiling spot light CFL LED fittings indoor on the wall ceiling rafters girders using 23 0.0076 twin twisted PVC insulated wires required Nos of round blocks and clamps.On wall ceiling Rafter Girders complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 98 128.1 98
247 Code247 Fixing a ceiling Wall mounting fan of all capacities and all types to the existing 'S'fthook with fan regulator to the existing board together with supplying andfixing 5A. ceilingrose necessary length of23 0.0076 inch PVC insulated twin twisted copper wire and wiring. complete with all lead and lifts and as per the directions of Engineer in charge of the work Each 31 179.55 31
248 CP 13 ITNO 13.14 ELE SR Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 A. ceiling rose with sufficient length of 23 0.0076 inch PVC insulated twin core wire. complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 16 516.6 16
249 CP 13 ITNO 13.17.1 ELE SR Fixing a shunt capacitor of ... kVAR capacity with necessary clamps bolts and nuts on existing wooden or metal board including banking of more than one capacitor upto 5 kVAR complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 5 283.5 5
250 CP 13 ITNO 13.10 ELE SR Fixing all types and all capacities of 1ftx4ft 2 inch x2ftLED Light fittings indoor on the wall ceiling rafters girders with necessary supporting frame using 2310.0076 inch twin twisted PVC insulated wires required Nos of round blocks and clamps. complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 18 514.5 18
251 Code251 Earth work excavation for pipelines cables by Manual means upto 600 mm trench width as per drawing and technical specifications including setting out shoring strutting barricading caution lights removal of stumps and other deleterious matter including dressing of excavated surfaces disposing off or leveling the excavated earth or sorting and stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches plinth sides of foundations etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour tools usage and other appurtenances required to complete the work. In all kinds of soils. Depth upto 1.50m complete with all lead and lifts and as per the directions of Engineer in charge of the work. M 40 508.2 40
252 BESCOM ITNO 32 SL 224 IT 32.14 Supplying of 95 Sqmm 3.5 Core (21 GI Strips 4 x 0.8 mm) XLPE or Heat resistant PVC insulated PVC exutruted Inner Seath Armoured LTUG Cable as per IS 1554 (Part 1) or IS 7098 Part 1 Armouring strip thickness and resistivity as per IS 3975 complete with all lead and lifts and as per the directions of Engineer in charge of the work. Km 0.05 391875.75 0.05
253 BESCOM ITNO 35 SL 264 IT 35.02 Epoxy Terminating Kit (Pothead) suitable for 1.1 kV LTUG Cable.Up to 3.5 x 70 95 120 Sqmm complete with all lead and lifts and as per the directions of Engineer in charge of the work. Set 2 401.1 2
254 BESCOM ITNO 31 SL 231 IT 31.06 Laying of cable in Existing Trench GI pipe Stone Ware RCC Hume pipe using Wooden Aluminum Rollers as directed by the departmental staff LT cable 35 to 95 Sqmm complete with all lead and lifts and as per the directions of Engineer in charge of the work. Km 0.05 32695.95 0.05
255 Code255 Making and Fixing pot head for LT Cable Heat shrinkable Type Terminations 35 to 95 Sqmm complete with all lead and lifts and as per the directions of Engineer in charge of the work. Set 2 199.5 2
256 CP 5 ITNO 5.17.4 ELE SR Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fining materials and 'C"Type curve indicator ON OFF energy cross 3 with Short droit breaking capacity of 10K and complete wiring as required confirming to IEC 60998 6 32 A DP complete with all lead and lifts and as per the directions of Engineer in charge of the work Each 1 775.95 1
257 Vol 5 SR 202324 PNo 140 ITNo 12.4 Geophysical investigation at site for sinking borewells for Providing drinking water to the habitation either through the Hand Pump MWS or P.W.S.S by vertical electrical sounding by adopting Venner or Schlumbergers's method including reconnaissance survey of geological formation. Geophysical investigation of existing ground water in the vicinity its quality quantity and acceptability of the users indicating the location of the site recommended depth of casing pipe required to seal the top unconsolidated formation including an extra depth of 1.0 metre in consolidated formation for proper seating of casing pipe depth of drilling required to cover full depth of aquifer proposed to be tapped probable yield and other information required including transportation of instruments and ccessories to work site engaging technical personal and labour required NOTE 1)Additional rate on item 1 and 2 is allowed for drilling in over burden and fixing Casing pipes beyond 20 M (for fixing Casing pipes only) a) Above 20 M and upto 30 M15 Percentage b) Above 30 M 30 Percentage (Measurement of overburden is restricted to the depth of casing pipe fixed excluding initial depth of 20M and projection above ground level). 2) A sum of Rs. 100 is to be deducted for Dry Borewell towards yield test complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 1 5288 1
258 Vol 5 SR 202324 PNo 139 ITNo 12.1.1 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG and above 1100 CMF and above in all strata including over burdern upto 20 m. Fixing of casing pipes collars and cap with necessary cutting threading and welding including ransportation of rig and supporting vehicle crew charges and cost of consumables etc.complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes collars cap etc. complete ) (Above 450m of drilling add 10 Percentage for every 50m depth) Borewell depth of 0 to 50 Mtrscomplete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 50 370 50
259 Vol 5 SR 202324 PNo 139 ITNo 12.1.2 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG and above 1100 CMF and above in all strata including over burdern upto 20 m. Fixing of casing pipes collars and cap with necessary cutting threading and welding including ransportation of rig and supporting vehicle crew charges and cost of consumables etc.complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes collars cap etc. complete ) (Above 450m of drilling add 10 Percentage for every 50m depth) Borewell depth of 50 to 100 Mtrs complete with all lead and lifts and as per the directions of Engineer in charge of the work. Rmtr 50 464 50
260 Vol 5 SR 202324 PNo 140 ITNo 12.1.3 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG and above 1100 CMF and above in all strata including over burdern upto 20 m. Fixing of casing pipes collars and cap with necessary cutting threading and welding including ransportation of rig and supporting vehicle crew charges and cost of consumables etc.complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes collars cap etc. complete ) (Above 450m of drilling add 10 Percentage for every 50m depth) Borewell depth of 10 to 150 Mtrscomplete with all lead and lifts and as per the directions of Engineer in charge of the work. Rmtr 50 493 50
261 Vol 5 SR 202324 PNo 140 ITNo 12.1.4 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG and above 1100 CMF and above in all strata including over burdern upto 20 m. Fixing of casing pipes collars and cap with necessary cutting threading and welding including ransportation of rig and supporting vehicle crew charges and cost of consumables etc.complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes collars cap etc. complete ) (Above 450m of drilling add 10 Percentage for every 50m depth) Borewell depth of 150 to200 Mtrs complete with all lead and lifts and as per the directions of Engineer in charge of the work. Rmtr 25 572 25
262 Vol 5 SR 202324 PNo 143 ITNo 12.32 Supply of ISI mark 175mm nominal boreplain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270 2001 and latest ammendments electrical resistance welded steel tubes material and conforming to IS 1387 1993 and manufactured by basic open hearth electric or basic oxygen process in random length of 5 7m both ends.threaded conforming to IS 554 1985 one end fixed with socket conforming to IS 4270 2001 and the other end with screwed pipes all shall be responsibaly free from defects. The tubes shall be responsible straight end should be with ISI marking weighing 25.10kg m.prices include Collar Medium duty. complete with all lead and lifts and as per the directions of Engineer in charge of the work. Rmtr 35 1933 35
263 Vol 5 202324 PNo 143 ITNo 12.33 Providing and fixing MS casing collars as per IS 1239 (part II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part II) 1982 with all amendments complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 8 150 8
264 Vol 5 202324 PNo 143 ITNo 12.34 Providing and laying at site of work MS casing caps as per IS 1239 (part II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part II) 1982 with all amendments including cost of material and labour charges for fixing if any etc. complete with all lead and lifts and as directed by the Ingineering incharge complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 1 164 1
265 Vol 5 202324 PNo 152 ITNo 13.15.4 Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034 2000;3Phase SS Bowl and Impeller with Low volt Motor as per specifications to work site as per necessary ammendments and instructions of engineer incharge of work. For 3 HP etc. complete 7.50 HP 155 LPM at 112 m equal 10 STG Outlet Dia 2.00 complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 1 34213 1
266 Vol 5 202324 PNo 154 ITNo 13.22.3 Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694 1990 with ISI Mark and as per its latest amendments.1x3x4 Sqm complete with all lead and lifts and as per the directions of Engineer in charge of the work. Rmtr 160 135 160
267 Vol 5 202324 PNo 154 ITNo 13.25.1 Supply and delivery at site of brand new best make non return valve as per IS 778 1984 with ISI Mark and as per its latest amendments complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 1 1250 1
268 Vol 5 202324 PNo 155 ITNo 13.24.3 Supply installingtesting and commissioning COMMON control panel consisting of the following INCOMING 1 No set of Phase indicating lamps with SFU of suitable rating 1 No Analog Ammeter 1 No Analog Voltmeter 1ni with Phase selector switch Isolating switch OUTGOING for Main Electrical Pump 1 No. MCB 1 No. DOL of S D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor under voltage over Volage under current over current and dry run protection suitable for the pump described above 1 no Indoor type NOTE 1) DOL Direct Online Starter 2) S D Star Delta Startercomplete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 1 17500 1
269 Vol 5 202324 PNo 155 ITNo 13.27.1 Supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (C Class) as per IS 1239 (Part I) 1990 with latest amendments with ISI Mark (one end fitted with Heavy Duty collar and other end fitted with protection 50 mm complete with all lead and lifts and as per the directions of Engineer in charge of the work. each 27 3050 27
270 Vol 5 202324 PNo 156 ITNo 13.32 Labour charges for Erection Electrification and commissioning of Pump sets including aligning and balancing of all items including supply and erection of two pair of supporting clamps bore well caps cable clips and water tight gland cable protectors bolts nuts valve and gaugestools and equipments etc. involved in the job as per specifications with ecessary tests as per specifications with testing of as per instructions of engineer incharge of work Each 1 6500 1
271 Vol 5 202324 PNo 156 ITNo 13.34 Labour charges for erection of outdoor type panel board and meter board units with all necessary materials and labour tools and equipments including providing cement concrete foundation bed etc. complete as per specification with testing of as per instructions of engineer incharge of work. Each 1 1450 1
272 Code272 K E B Registration Charges For 7.5 HP Pump and Morter complete with all lead and lifts and as per the directions of Engineer in charge of the work. LS 1 17500 1
273 Vol 2 202324 PNo 88 ITNo 11.35.2.3 Providing and fixing aluminium work for doors windows ventilators and partitions with extruded built up standard tubular sections appropriate sections and other sections of approved make conforming to IS 733 and IS 1285 fixing with dash fasteners of required dia and size including necessary filling up the gaps at junctions i.e. at top bottom and sides with required EPDM rubber neoprene gasket etc. Aluminium sections shall be smooth rust free straight mitred and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing paneling C.P. brass stainless steel screws all complete as per architectural drawings and the directions of Engineer in charge. (Glazing paneling and dash fasteners to be paid for separately) For shutters of doors windows and ventilators including providing and fixing hinges pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber neoprene gasket required (Fittings shall be paid for separately) Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) including cost of materials labour usage charges of machinery complete as per specifications. complete with all lead and lifts and as per the directions of Engineer in charge of the work. Kg 2498.03 611.1 2498.03
274 Vol 2 202324 PNo 89 ITNo 11.37.3 Providing and fixing glazing in aluminium door window ventilator shutters and partitions etc. with EPDM rubber neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in charge . (Cost of aluminium snap beading shall be paid in basic item) With float glass panes of 8 mm thickness (weight not less than 20 kg m2) including cost of materials labour usage charges of machinery complete as per specifications complete with all lead and lifts and as per the directions of Engineer in charge of the work. Sqm 24.82 1370.25 24.82
275 Vol 2 202324 PNo 89 ITNo 11.36.2 Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS 12823 Grade l Type ll in panelling fixed in aluminum doors windows shutters and partition frames with C.P. brass stainless steel screws etc. complete as per architectural drawings and directions of engineer in charge Pre laminated particle board with decorative lamination on both sides including cost of materials labour usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge. Sqm 49.61 1032.15 49.61
276 Vol 2 202324 PNo 217 ITNo 22.6 Providing and supplying 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand bo xesshelvesracksalmirahcupboard and drawer etc. including necessary nailsscrews etc. complete as per direction of Engineer in charge. Sqm 474.64 1165.5 474.64
277 Vol 2 202324 PNo 218 ITNo 22.96 Providing and fixing stainless steel 304 grade fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer in charge. (150mm length) complete with all lead and lifts and as per the directions of Engineer in charge of the work. No 74 1417.5 74
278 Vol 2 202324 PNo 218 ITNo 22.12 Providing and fixing stainless steel 304 grade soft closing hinges with two hole fixing and 165 degrees turning option for Wardrobe Doors Kitchen and other utilities of reputed make with screws etc. complete as per directions of Engineer in charge No 160 236.25 160
279 Vol 2 202324 PNo 218 ITNo 22.11 Providing and fixing Stainless Steel soft closing heavy telescopic drawer channels of approved make 500mm long with screws etc. including making necessary recess in board and finished etc. complete as per direction of Engineer in charge. No 296 273 296
280 Vol 2 202324 PNo 218 ITNo 22.14 Providing and fixing 2mm thick 16 to 19mm wide PVC edge binding tape of approved quality for cupboard wardrobe kitchen shutters including necessary synthetic resin hot pressed to edges on binding machine etc. complete as per directions of Engineer in charge. M 289 4.2 289
281 Vol 2 202324 PNo 219 ITNo 22.15.5 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge. SS Tower bolt 150X10mm complete with all lead and lifts and as per the directions of Engineer in charge of the work No 40 126 40
282 Vol 2 202324 PNo 105 ITNo 12.65 Providing and fixing magnetic catcher of approved quality in cupboard ward robe shutters including fixing with necessary screwscomplete with all lead and lifts and as per the directions of Engineer in charge of the work No 50 61.95 50
283 Vol 2 202324 PNo 107 ITNo 12.77.1 Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete 40 mm complete with all lead and lifts and as per the directions of Engineer in charge of the work Each 46 326.55 46
284 Vol 2 202324 PNo 17 ITNo 6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg m3 and minimum compressive strength of 4.00 N mm2 conforming to IS 2185 (Part I) 2005 and constructed with CM 1 4 as per IS 2572 2005 including cost of all materials labour scaffolding and curing usage charges of machinery etc complete as per specifications. complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 3.5 1375.5 3.5
285 Vol 2 202324 PNo 41 ITNo 8.1.1 Providing 12 mm cement plaster with cement mortar 1 4 (1 cement 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering providing and removing scaffolding including cost of materials labour curing complete as per specifications and as per directions of Engineer in charge. Sqm 21.2 267.75 21.2
286 Vol 1 202324 PNo 16 ITNo 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works and super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers well compacted using needle vibrators. The cost includes all lead and lifts cost of all materials quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all other appurtenances required to complete the work as per technical specifications. 2.5.2 M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 1.68 7070.7 1.68
287 Vol 2 202324 PNo 63 ITNo 9.24 Providing and laying Polished Granite stone flooring in required design and patterns in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1 4 (1 cement 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing curing and polishing etc. all complete as specified and as directed by the Engineer in Charge.Polished Granite stone slab Black Cat Eye River Pink or equivalent complete with all lead and lifts and as per the directions of Engineer in charge of the work. Sqm 6.5 2990.4 6.5
288 Vol 2 202324 PNo 46 ITNo 8.33.1 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Two coats applied on walls at 1.25 ltr 10 m2 over and including one coat of Special primer applied at 0.75 ltr 10 m2 with paint of approved quality to give an even shade after thoroughly brooming the surface to remove all dirt dust mortar drops and foreign matter including preparing the surface even and sand paper smooth cost of materials labour complete as per specifications and as per directions of Engineer in charge. Vol 2 46 8.33.1 complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 21.2 165.9 21.2
289 Vol 2 202324 PNo 219 ITNo 22.19 Providing and fixing Single seater Recliner with cushion of size 3(L)x2.5(W)X2.75(H) ft made of Polyurethane or High performance upholstery fabric with seats fitted with cushion padding springs webbing and as per direction of engineer in charge No 2 31500 2
290 Vol 2 202324 PNo 219 ITNo 22.20 Providing and fixing of Tea table 900mm x 750mm 450mm with 12mm thick ethched tempered glass with bevelled drawing made out of BWP ply and out faces laminated with 4mm thick veneer or 1mm thick laminate complete with all lead and lifts and as per the directions of Engineer in charge of the work No 1 7875 1
291 Code291 Original Schmidt N ( PROCEQ) Analog Rebound Hammer Consisting of Test hammer Carrying case Grinding stone Operating instruction complete with all lead and lifts and as per the directions of Engineer in charge of the work No 2 150000 2
292 Code292 Concrete Pan Mixer Pan Type Capacity 40L complete with all lead and lifts and as per the directions of Engineer in charge of the work No 1 95000 1
293 Code293 Accelerated Curing Tank for 12 moulds of 150mm size complete with all lead and lifts and as per the directions of Engineer in charge of the work No 1 112000 1
294 Code294 VicaT Apparatus with ISI Certification Mark IS 5513 fitted in Aluminium Box complete with all lead and lifts and as per the directions of Engineer in charge of the work No 1 3500 1
295 Code295 Pace Control Digital Compression Testing Machine Capacity 2000kN with NABL calibration certificate complete with all lead and lifts and as per the directions of Engineer in charge of the work No 1 340000 1
296 Code296 Mould Steel for 70.6mm cube complete with all lead and lifts and as per the directions of Engineer in charge of the work No 12 780 12
297 Code297 Standard Sand Grade I complete with all lead and lifts and as per the directions of Engineer in charge of the work Bag 1 1750 1
298 Code298 Standard Sand Grade II complete with all lead and lifts and as per the directions of Engineer in charge of the work Bag 1 1750 1
299 Code299 Standard Sand Grade Ill complete with all lead and lifts and as per the directions of Engineer in charge of the work Bag 1 1750 1
300 Code300 Laboratory Electric Oven with Digital Indicator Cum Controller with Safety Alarm range 50deg to 250 deg C plus 1 deg C with Air Circulating Fan S.S. Inside Size 600 x 600 x 600mm complete with all lead and lifts and as per the directions of Engineer in charge of the work No 1 50000 1
301 Code301 Vibrating table 50 x 50cm for 4 moulds of 150mm cube complete with all lead and lifts and as per the directions of Engineer in charge of the work No 1 35000 1
302 Code302 Sieve Shaker Motorised with built in Digital Timer complete with all lead and lifts and as per the directions of Engineer in charge of the work No 1 25000 1
303 Code303 Domestic Use Micro Oven complete with all lead and lifts and as per the directions of Engineer in charge of the work No 1 12000 1
304 Code304 Compaction Mould 150mm ID 127.3mm height 2250ml volume complete with Collar and Base Plate made of Mild steel complete with all lead and lifts and as per the directions of Engineer in charge of the work No 2 3200 2
305 Code305 Rammer 4.9kg x 450mm controlled dropcomplete with all lead and lifts and as per the directions of Engineer in charge of the work No 2 2200 2
306 Code306 Compaction Mould 100mm ID 127.3mm height 1000ml volume complete with Collar and Base Plate made of Mild Steel complete with all lead and lifts and as per the directions of Engineer in charge of the work No 2 2500 2
307 Code307 Rammer 2.6kg x 310mm fall as per IS 9198 complete with all lead and lifts and as per the directions of Engineer in charge of the work No 2 2000 2
308 Code308 Gauging Trowel Ref. Standard IS 4031 100 to 150mm long blade with straight edge. Weight 210plus or minus10g complete with all lead and lifts and as per the directions of Engineer in charge of the work No 2 530 2
309 Code309 Gauging Trowel Ref.Standard IS 5515 200mm long blade Weight 210 plus10g complete with all lead and lifts and as per the directions of Engineer in charge of the work No 2 560 2
310 Code310 Universal Automatic Compactor with Mild Steel compaction mould as per IS supplied with AIM 11001 MS Compaction Mould 100mm ID 127.3mm height 1000ml volume complete with Collar and Base Plate made of Mild Steel and AIM 11101 MS Compaction Mould 150mm ID 127.3mm height 2250ml volume complete with Collar and Base Plate made of Mild steel complete with all lead and lifts and as per the directions of Engineer in charge of the work No 1 155000 1
311 Code311 Core Cutter apparatus supplied with 100mm dia Core Cutter Steel Dolly and Rammer – 1 No. each complete with all lead and lifts and as per the directions of Engineer in charge of the work No 5 2500 5
312 Code312 Tool kit which includes Spanners Cutting player Adjustable Wrenches Steel and Wooden Hammers complete with all lead and lifts and as per the directions of Engineer in charge of the work No 1 5500 1
313 Code313 Hose complete with all lead and lifts and as per the directions of Engineer in charge of the work No 2 800 2
314 Code314 Almirah complete with all lead and lifts and as per the directions of Engineer in charge of the work No 6 18000 6
315 Code315 Big knife complete with all lead and lifts and as per the directions of Engineer in charge of the work No 2 320 2
316 Code316 Engine oil complete with all lead and lifts and as per the directions of Engineer in charge of the work L 1 550 1
317 Code317 Cloth waste (10 kg) complete with all lead and lifts and as per the directions of Engineer in charge of the work Kg 1 300 1
318 Code318 Tarpaulin 6ft x 6ft complete with all lead and lifts and as per the directions of Engineer in charge of the work No 2 650 2
319 Code319 Trovel (big) complete with all lead and lifts and as per the directions of Engineer in charge of the work No 2 350 2
320 Code320 Trovel (big) complete with all lead and lifts and as per the directions of Engineer in charge of the work No 2 450 2
321 Code321 Grease complete with all lead and lifts and as per the directions of Engineer in charge of the work kg 1 1000 1
322 Code322 Wheel Barrow complete with all lead and lifts and as per the directions of Engineer in charge of the work No 1 7500 1
323 Code323 Thermal Resistant Glouse complete with all lead and lifts and as per the directions of Engineer in charge of the work Pair 1 500 1
324 Code324 Measurement Tape 5 15 30 and 50MTS complete with all lead and lifts and as per the directions of Engineer in charge of the work No 1 4500 1
325 Code325 HP Desktop G6 (Intelcore I5 Processor 8gb Dddr 4ram 128gb Solid State Drive 1tb Hard Disk Drive 6usb Ports 10 100 1000 Gigabit Port Multimedia Keyboard Optical Scroll Mouse Window 10 Preloaded 23.8" Hd Ips Hdmi Moniter K7 Mat Total Security With One Year Licence Validity complete with all lead and lifts and as per the directions of Engineer in charge of the work No 4 80000 4
326 Code326 Canon Image Class Mf465dw Monochrome Duplex Wireless Laser Printer All In One With Scanner Copier Fax Home Or Office Auto Document Feeder complete with all lead and lifts and as per the directions of Engineer in charge of the work No 1 70000 1
Milestone 1st Milestone 2st Milestone 3st Milestone
Cumulative Milstone
APT Milestones and liquidity damages
MILESTONES AMOUNT Liquidity damage
Earth Work Excavation 1192.17 Cum 954.00 Cum
Providing Brick Masonry 414.33 Cum 332.00 Cum
Cement Concrete both PCC and RCC 558.15 Cum 447.00 Cum
Reinforcement of Steel 0.000 Tonne 29.066 Tonne
Providing and laying vitrified flooring 838.47 Sqm 671.00 Sqm
Design, Supplying, erecting, testing and commissioning of Passenger Lift - Minimum 8 Person Capacity - Job 1 1 Job
EMD mini In Rs 598000
Annual turn over - In Lakhs 796.55
Line of credit In Lakhs 121.45
Similar nature of work - In Lakhs 199.14
TENTATIVE PHYSICAL / FINANCIAL ACTIVITY CHART
NAME OF WORK : CONSTRUCTION OF MINOR IRRIGATION AND GEOLOGY OFFICE AT HEBBALA IN MYSORE CITY
Total Duration - 11 Months (Including Monsoon)
Sl. No. Code No Activity Unit Quantity
1 Vol 1 PNo 8 ITNo 1.12 202324 Earth work in surface excavation by mechanical means for lowering and leveling the ground for all works other than foundation in all kinds of soils and upto depth not exceeding 300mm as per drawing and technical specifications including setting out shoring strutting barricading caution lights removal of stumps and other deleterious matter including dressing of excavated surfaces disposing off or levelling the excavated earth or sorting and stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour tools usage of machinery and other appurtenances required complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 336.6 A
2 Vol 1 PNo 8 ITNo 1.14.1 202324 Earth work excavation for Foundation by mechanical means for all works and depth upto 3 m as per drawing and technical specifications including setting out shoring strutting barricading caution lights including dressing of excavated surfaces disposing off or levelling the excavated earth or sorting and stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour tools usage of machinery and other appurtenaces required to complete the work In all kinds of soils Depth upto 3 mcomplete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 602.2499999999999 A
3 Vol 1 PNo 8 ITNo 1.12.2 202324 Earth work excavation for Foundation by mechanical means for all works and depth upto 3 m as per drawing and technical specifications including setting out shoring strutting barricading caution lights including dressing of excavated surfaces disposing off or levelling the excavated earth or sorting and stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour tools usage of machinery and other appurtenaces required to complete the work In ordinary soft rock without blasting Depth exceeding 1.5 m but not exceeding 3 mcomplete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 229.02 A
146 Vol 1 SR 202122 PNo 5 ITNo 1.6.1 Earth work excavation for pipelines cables by Manual means upto 600 mm trench width as per drawing and technical specifications including setting out shoring strutting barricading caution lights removal of stumps and other deleterious matter including dressing of excavated surfaces disposing off or leveling the excavated earth or sorting and stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches plinth sides of foundations etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour tools usage and other appurtenances required to complete the work.In all kinds of soils. Depth upto 1.50m complete with all lead and lifts and as per the directions of Engineer in charge of the work. Cum 24.3 A
5 Vol 1 PNo 15 ITNo 2.1.3 202324 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed laid in layers not exceeding 150 mm thickness well compacted using plate vibrators including all lead and lifts cost of all materials of quality labour Usage charges of machinery curing and all the other appurtenances required to complete the work as per technical specifications Mix 1 3 6 Using 40 mm nominal size graded crushed coarse aggregates complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 85.97000000000001 B
9 Vol 1 PNo 16 ITNo 2.4.3 202324 Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works and super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers well compacted using needle vibrators. The cost includes all lead and lifts cost of all materials quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatescomplete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 171.23000000000002 B
10 Vol 1 PNo 16 ITNo 2.5.2 202324 Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works and super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers well compacted using needle vibrators. The cost includes all lead and lifts cost of all materials quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 10.690000000000001 B
11 Vol 1 PNo 16 ITNo 2.5.2 202324 Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works and super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers well compacted using needle vibrators. The cost includes all lead and lifts cost of all materials quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatescomplete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 21.44 B
12 Vol 1 PNo 16 ITNo 2.5.2 202324 Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works and super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers well compacted using needle vibrators. The cost includes all lead and lifts cost of all materials quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatescomplete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 55.75 B
13 Vol 1 PNo 16 ITNo 2.5.2 202324 Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works and super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers well compacted using needle vibrators. The cost includes all lead and lifts cost of all materials quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 9.928000000000003 B
42 Vol 1 PNo 16 ITNo 2.5.2 202324 Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works and super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers well compacted using needle vibrators. The cost includes all lead and lifts cost of all materials quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatescomplete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 11.190000000000001 B
43 Vol 1 PNo 16 ITNo 2.5.2 202324 Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works and super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers well compacted using needle vibrators. The cost includes all lead and lifts cost of all materials quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatescomplete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 22.020000000000003 B
44 Vol 1 PNo 16 ITNo 2.5.2 202324 Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works and super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers well compacted using needle vibrators. The cost includes all lead and lifts cost of all materials quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatescomplete with all lead and lifts and as per the directions of Engineer in charge of the work. Cum 3.59 B
45 Vol 1 PNo 16 ITNo 2.5.2 202324 Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works and super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers well compacted using needle vibrators. The cost includes all lead and lifts cost of all materials quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatescomplete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 53.65 B
48 Vol 1 PNo 16 ITNo 2.5.2 202324 Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works and super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers well compacted using needle vibrators. The cost includes all lead and lifts cost of all materials quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatescomplete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 2.9299999999999997 B
75 Vol 1 PNo 16 ITNo 2.5.2 202324 Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works and super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers well compacted using needle vibrators. The cost includes all lead and lifts cost of all materials quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 11.190000000000001 B
76 Vol 1 PNo 16 ITNo 2.5.2 202324 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 22.020000000000003 B
77 Vol 1 PNo 16 ITNo 2.5.2 202324 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates including cost of materials labour usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge. Cum 3.59 B
78 Vol 1 PNo 16 ITNo 2.5.2 202324 Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works and super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers well compacted using needle vibrators. The cost includes all lead and lifts cost of all materials quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 53.66 B
81 Vol 1 PNo 16 ITNo 2.5.2 202324 Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works and super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers well compacted using needle vibrators. The cost includes all lead and lifts cost of all materials quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 2.9299999999999997 B
108 Vol 1 PNo 16 ITNo 2.5.2 202324 Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works and super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers well compacted using needle vibrators. The cost includes all lead and lifts cost of all materials quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatescomplete with all lead and lifts and as per the directions of Engineer in charge of the work. Cum 4.93 B
109 Vol 1 PNo 16 ITNo 2.5.2 202324 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 0.5900000000000001 B
110 Vol 1 PNo 16 ITNo 2.5.2 202324 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates including cost of materials labour usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge Cum 3.59 B
111 Vol 1 PNo 16 ITNo 2.5.2 202324 Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works and super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers well compacted using needle vibrators. The cost includes all lead and lifts cost of all materials quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatescomplete with all lead and lifts and as per the directions of Engineer in charge of the work. Cum 4.03 B
114 Vol 1 PNo 16 ITNo 2.5.2 202324 Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works and super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers well compacted using needle vibrators. The cost includes all lead and lifts cost of all materials quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatescomplete with all lead and lifts and as per the directions of Engineer in charge of the work. Cum 0.18 B
140 Vol 1 PNo 16 ITNo 2.5.2 202324 Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works and super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers well compacted using needle vibrators. The cost includes all lead and lifts cost of all materials quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatescomplete with all lead and lifts and as per the directions of Engineer in charge of the work. Cum 3.05 B
14 Vol 2 PNo 13 ITNo 6.6 202324 Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 5.0 conforming to IS 2222 in superstructure above plinth level in cement mortar 1 6 (1 cement 6 coarse sand) With Modular bricks including cost of all materials labour ascaffolding and usage charges of machinery and other incidental charges complete as per the direction of engineer incharge of work. Cum 133.87 C
46 Vol 2 PNo 13 ITNo 6.6 202324 Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 5.0 conforming to IS 2222 in superstructure above plinth level in cement mortar 1 6 (1 cement 6 coarse sand) With Modular bricks including cost of all materials labour ascaffolding and usage charges of machinery and other incidental charges complete as per the direction of engineer incharge of work. Cum 123.23 C
79 Vol 2 PNo 13 ITNo 6.6 202324 Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 5.0 conforming to IS 2222 in superstructure above plinth level in cement mortar 1 6 (1 cement 6 coarse sand) With Modular bricks including cost of all materials labour ascaffolding and usage charges of machinery and other incidental charges complete as per the direction of engineer incharge of work. Cum 123.24 C
112 Vol 2 PNo 13 ITNo 6.6 202324 Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 5.0 conforming to IS 2222 in superstructure above plinth level in cement mortar 1 6 (1 cement 6 coarse sand) With Modular bricks including cost of all materials labour ascaffolding and usage charges of machinery and other incidental charges complete as per the direction of engineer incharge of work. Cum 33.99 C
15 Vol 1 PNo 84 ITNo 2.11 202324 Supplying fitting and placing TMT FE 550 550D Steel Reinforcement including cost of all materials machinery labour cleaning straightening cutting bending hooking laping welding joints tying with binding wire soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.complete with all lead and lifts and as per the directions of Engineer in charge of the work Tonne 14.68 D
47 Vol 1 PNo 84 ITNo 2.11 202324 Supplying fitting and placing TMT FE 550 550D Steel Reinforcement including cost of all materials machinery labour cleaning straightening cutting bending hooking laping welding joints tying with binding wire soft annealed steel wire and other ancilary operations complete with all lead and lifts and as per the directions of Engineer in charge of the work Tonne 0.000 D
80 Vol 1 PNo 84 ITNo 2.11A 202324 Supplying fitting and placing TMT FE 550 550D Steel Reinforcement including cost of all materials machinery labour cleaning straightening cutting bending hooking laping welding joints tying with binding wire soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.complete with all lead and lifts and as per the directions of Engineer in charge of the work Tonne 0.000 D
113 Vol 1 PNo 84 ITNo 2.11A 202324 Supplying fitting and placing TMT FE 550 550D Steel Reinforcement including cost of all materials machinery labour cleaning straightening cutting bending hooking laping welding joints tying with binding wire soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.complete with all lead and lifts and as per the directions of Engineer in charge of the work. Tonne 2.7 D
20 Vol 2 PNo 60 ITNo 9.12.2 202324 Providing and laying vitrified floor tiles with thickness 9 10 mm in different sizes with water absorption less than 0.08 Percentage and conforming to IS 15622 of approved make in all colours and shades laid on 20mm thick cement mortar 1 4 (1 cement 4 coarse sand) jointing with grey cement slurry at 3.3 kg m2 including grouting the joints with white cement and matching pigments Size of Tile 600x600 mmcomplete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 280.3 E
53 Vol 2 PNo 60 ITNo 9.12.2 202324 Providing and laying vitrified floor tiles with thickness 9 10 mm in different sizes with water absorption less than 0.08 Percentage and conforming to IS 15622 of approved make in all colours and shades laid on 20mm thick cement mortar 1 4 (1 cement 4 coarse sand) jointing with grey cement slurry at 3.3 kg m2 including grouting the joints with white cement and matching pigments Size of Tile 600x600 mmcomplete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 273.35999999999996 E
86 Vol 2 PNo 60 ITNo 9.12.2 202324 Providing and laying vitrified floor tiles with thickness 9 10 mm in different sizes with water absorption less than 0.08 Percentage and conforming to IS 15622 of approved make in all colours and shades laid on 20mm thick cement mortar 1 4 (1 cement 4 coarse sand) jointing with grey cement slurry at 3.3 kg m2 including grouting the joints with white cement and matching pigments Size of Tile 600x600 mmcomplete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 273.35999999999996 E
119 Vol 2 PNo 60 ITNo 9.12.2 202324 Providing and laying vitrified floor tiles with thickness 9 10 mm in different sizes with water absorption less than 0.08 Percentage and conforming to IS 15622 of approved make in all colours and shades laid on 20mm thick cement mortar 1 4 (1 cement 4 coarse sand) jointing with grey cement slurry at 3.3 kg m2 including grouting the joints with white cement and matching pigments Size of Tile 600x600 mmcomplete with all lead and lifts and as per the directions of Engineer in charge of the work. Sqm 11.45 E
4 Vol 2 PNo 5 ITNo 4.1 202324 Providing and injecting chemical emulsion for Pre constructional Anti Termite Treatment creating continuous chemical barrier under and around the column pits walls trenches basement excavation top surface of the plinth filling junction of wall and floor along the external perimeter of building expansion joints over the top surface of consolidated earth on which apron is to be laid surrounding of pipes and conduits with Chlorpyriphos 20 Percentage E.C. Lindane 20 Percentage E.C. at 3.19 l m2 including cost of chemical diluting in water to one percent concentration labour usage charges of machinery complete as per specifications complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 1595.62
6 Vol 2 PNo 9 ITNo 5.2 202324 Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1 6 (1 cement 6 coarse sand) complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 58.2
7 Vol 2 PNo 9 ITNo 5.3 202324 Providing Coursed rubble masonry (second sort) with hard stone in foundation and plinth with Cement mortar 1 6 (1 cement 6 coarse sand) complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 43.66
8 Vol 2 PNo 214 ITNo 8.80 202324 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer in charge 20 mm to 25 mm wide to required depth complete with all lead and lifts and as per the directions of Engineer in charge of the work M 431.08
16 Vol 2 PNo 41 ITNo 8.2.1 202324 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1 4 (1 cement 4 fine sand) including rounding off corners wherever required smooth rendering providing and removing scaffolding including cost of materials labour curing complete as per specifications complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 406.13
17 Vol 2 PNo 41 ITNo 8.1.1 202324 Providing 12 mm cement plaster with cement mortar 1 4 (1 cement 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering providing and removing scaffolding including cost of materials labour curing complete as per specificationscomplete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 363.74
18 Vol 2 PNo 42 ITNo 8.8 202324 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1 5 (1 cement 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1 6 (1 cement 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering providing and removing scaffolding including cost of materials labour curing complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 1025.2299999999996
19 Vol 2 PNo 50 ITNo 8.5.1 202324 Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete as per specifications complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 1388.9699999999996
21 Vol 2 PNo 64 ITNo 9.30 202324 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1 6 20 mm thick and joints finished with cement mortar 1 3 over existing cement concrete bed including cost of materials mortar labour curing complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 64.42
22 Vol 2 PNo 71 ITNo 10.14 202324 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS 15622 (thickness to be specified by the manufacturer) of approved make in all colours shades except burgundy bottle green black of any size as approved by Engineer in Charge in skirting risers of steps and dados over 12 mm thick bed of cement mortar 1 3 (1 cement 3 coarse sand) and jointing with grey cement slurry at 3.3kg m2 including pointing in white cement mixed with pigment of matching shade complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 46.519999999999996
23 Vol 2 PNo 45 ITNo 8.25 202324 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt dust mortar drops and foreign matter including preparing the surface even and sand paper smooth cost of materials labour complete as per specifications and as per directions of Engineer in charge Sqm 406.13
24 Vol 2 PNo 46 ITNo 8.31 202324 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade New work (Two coats applied at 1.43 ltr 10 m2 over and including priming coat of exterior primer applied at 2.20 kg 10 m2) with paint of approved quality to give an even shade after thoroughly brooming the surface to remove all dirt dust mortar drops and foreign matter including preparing the surface even and sand paper smooth cost of materials labour complete as per specifications and as per directions of Engineer in charge. Sqm 406.13
25 Vol 2 PNo 46 ITNo 8.33.1 202324 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Two coats applied on walls at 1.25 ltr 10 m2 over and including one coat of Special primer applied at 0.75 ltr 10 m2 with paint of approved quality to give an even shade after thoroughly brooming the surface to remove all dirt dust mortar drops and foreign matter including preparing the surface even and sand paper smooth cost of materials labour complete as per specifications and as per directions of Engineer in charge. Sqm 1388.9699999999996
26 Vol 2 PNo 99 ITNo 12.11 202324 Providing Honne wood frames of doors windows clerestory windows ventilators and other frames wrought framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps) but including cost of materials labour usage charges complete as per specifications.complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 1.0999999999999999
27 Vol 2 PNo 104 ITNo 12.51 202324 KSRB 9 27.1 Fixing of door frame in an existing opening including embeeding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1 3 6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame making good the damages to walls and floor as required and disposal of the debries with lead upto 50 m. including cost of materials labour charges complete as per specifications.complete with all lead and lifts and as per the directions of Engineer in charge of the work No 16
28 Vol 2 PNo 103 ITNo 12.51 202324 Providing and fixing in position Honne wood half panelled shutters at bottom and half glazed at top for window shutters with stiles and rails of 35mm. thick 75mm wide in two halves with panels of 25mm thick 3mm thick reeded glass for top panels fixed with wooden beading including cost of materials labour charges usage charges complete as per specifications. (excluding cost of fixtures)complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 11.93
29 Vol 2 PNo 108 ITNo 12.83.2 202324 Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance plus or minus1mm) with wall thickness 2.0 mm (plus or minus 0.2 mm) corners of the door frame to be Jointed with galvanized brackets and stainless steel screws joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (plus or minus 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer in charge 42x50 mm PVC Extruded sectioncomplete with all lead and lifts and as per the directions of Engineer in charge of the work M 30
30 Vol 2 PNo 111 ITNo 12.92 202324 Providing and fixing of Openable door made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) and lead free with gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile through out the openable frame. The frame having overall size of 60mm x 55mm with GI reinforcement of 1mm thickness and openable sash with overall size of 60mm x 102mm and GI reinforcement of 2mm thickness. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 34 mm. Windows shall be provided with 6mm plain float glass Standard hardware with 2D 3D hinge and Multi point locking system with Handle. Wall thickness of frame and sash shall be of 2mm 2.5mm. Maximum possible size – 900mm x 2400mm. (The cost is inclusive of all fixtures and separate charges for minor T and P's shall not be made)complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 9.45
31 Vol 2 PNo 200 ITNo 20.34.1 202324 Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete. 125x70x4 mm (ordinary type)complete with all lead and lifts and as per the directions of Engineer in charge of the work Each 48
32 Vol 2 PNo 105 ITNo 12.62 202324 Providing and fixing chromium plated brass handles of 100 125 mm with necessary screwscomplete with all lead and lifts and as per the directions of Engineer in charge of the work No 11
33 Vol 2 PNo 105 ITNo 12.60 202324 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws complete with all lead and lifts and as per the directions of Engineer in charge of the work No 11
34 Vol 2 PNo 105 ITNo 12.58 202324 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws complete with all lead and lifts and as per the directions of Engineer in charge of the work No 11
35 Vol 2 PNo 105 ITNo 12.59 202324 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI IS 3564 embossed on the body door weight upto 35 kg and door width upto 700 mm) with necessary accessories and screws complete with all lead and lifts and as per the directions of Engineer in charge of the work No 11
36 Vol 2 PNo 110 ITNo 12.90 202324 Providing and fixing of 3 track x 2 panel sliding windows made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile through out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass standard hardware and Multi point locking system with touch lock. Wall thickness of frame and sash shall be of 2mm 2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T and P shall not be made)complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 62.78
37 Vol 2 PNo 85 ITNo 11.28 202324 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes channels plates etc. including welding grinding buffing polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete i c fixing the railing with necessary accessories and stainless steel dash fasteners stainless steel bolts etc. of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer in charge (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts bolts fasteners etc.) including cost of materials labour usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge. Sqm 218.1
38 Vol 2 PNo 149 ITNo 15.1 202324 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace Chajjas Sunken portion of WC Bathroom cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400 Percentage and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats at 1.6 kg m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer at 150 g m2 and protection with 120gsm Geo textile over the waterproofing membrane. The finished cost to include surface preparation making coving at Junction Bore Packing treatment of construction joints completely as per specification.complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 31.89
39 Code No39 Design supplying erecting testing and commissioning of Passenger Bed cum passenger hospital lift with speed of 1mtr per second variable voltage variable frequency drive with or without machine room for the available well size operating at 415 V 3 phase 50 cycles AC supply powder coated Stainless Steel car entrance doors enclosures with suitable colour vinyl flooring LED car illumination emergency light intercom and fan as desired by the user central opening side opening door with or without attendant operation 7 segment display buttons call register indicator fireman drive SS handrails inside car full length infrared curtain in car door automatic rescue device with batteries voice announcing in regional international languages Braille buttons with one year warranty and maintenance with necessary scaffolding and minor civil works like fixing of guide rail counter weight etc.The total product and services shall adhere to IS 14665 2016 ( with latest amendments) part section 1 to 5 with regards to general guidelines of fire safety rated doors MRLL beams pressure switch manual change over for doors during emergency ARD of 10 times with sufficient battery back up and standard dimensions of chair car and door openings for all sizes and capacities of lifts including fitness certificate and duly observing all other safety norms prescribed and adhere to CPWD specifications PCB Norms National Electricity Code (NEC) NBC 2016 IEC and Karnataka State Lifts Escalators and Passengers Conveyers Act 2012 and Rules 2014. The Supplier shall be registered in Government Electrical Inspectorate in the State of Karnataka. B.With Machine Room SS Finishcomplete with all lead and lifts and as per the directions of Engineer in charge of the work Job 1
40 Vol 2 PNo 86 ITNo 11.34B 202324 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings wooden frames with rawl plugs screws complete with all lead and lifts and as per the directions of Engineer in charge of the work Kg 627.8
41 Vol 2 PNo 82 ITNo 11.16.2 202324 Providing and fixing Steel work in built up tubular (round square or rectangular hollow tubes etc.) trusses etc. including cutting hoisting fixing in position and applying a priming coat of approved steel primer including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials labour usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge Kg 1764.54
49 Vol 2 PNo 41 ITNo 8.2.1 202324 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1 4 (1 cement 4 fine sand) including rounding off corners wherever required smooth rendering providing and removing scaffolding including cost of materials labour curing complete as per specifications and as per directions of Engineer in charge. Sqm 365.18000000000006
50 Vol 2 PNo 41 ITNo 8.1.1 202324 Providing 12 mm cement plaster with cement mortar 1 4 (1 cement 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering providing and removing scaffolding including cost of materials labour curing complete as per specifications and as per directions of Engineer in charge Sqm 373.40000000000003
51 Vol 2 PNo 42 ITNo 8.8 202324 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1 5 (1 cement 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1 6 (1 cement 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering providing and removing scaffolding including cost of materials labour curing complete as per specifications and as per directions of Engineer in charge. Sqm 1053.9299999999998
52 Vol 2 PNo 50 ITNo 8.51 202324 Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Sqm 1427.33
54 Vol 2 PNo 64 ITNo 9.30 202324 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1 6 20 mm thick and joints finished with cement mortar 1 3 over existing cement concrete bed including cost of materials mortar labour curing complete as per specifications.complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 64.43
55 Vol 2 PNo 71 ITNo 10.14 202324 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS 15622 (thickness to be specified by the manufacturer) of approved make in all colours shades except burgundy bottle green black of any size as approved by Engineer in Charge in skirting risers of steps and dados over 12 mm thick bed of cement mortar 1 3 (1 cement 3 coarse sand) and jointing with grey cement slurry at 3.3kg m2 including pointing in white cement mixed with pigment of matching shade complete.complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 46.519999999999996
56 Vol 2 PNo 45 ITNo 8.25 202324 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt dust mortar drops and foreign matter including preparing the surface even and sand paper smooth cost of materials labour complete as per specifications and as per directions of Engineer in charge. Sqm 365.17
57 Vol 2 PNo 46 ITNo 8.31 202324 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade New work (Two coats applied at 1.43 ltr 10 m2 over and including priming coat of exterior primer applied at 2.20 kg 10 m2) with paint of approved quality to give an even shade after thoroughly brooming the surface to remove all dirt dust mortar drops and foreign matter including preparing the surface even and sand paper smooth cost of materials labour complete as per specifications and as per directions of Engineer in charge. Sqm 365.18000000000006
58 Vol 2 PNo 46 ITNo 8.33.1 202324 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Two coats applied on walls at 1.25 ltr 10 m2 over and including one coat of Special primer applied at 0.75 ltr 10 m2 with paint of approved quality to give an even shade after thoroughly brooming the surface to remove all dirt dust mortar drops and foreign matter including preparing the surface even and sand paper smooth cost of materials labour complete as per specifications and as per directions of Engineer in charge. Sqm 1427.33
59 Vol 2 PNo 99 ITNo 2.11 202324 Providing Honne wood frames of doors windows clerestory windows ventilators and other frames wrought framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps) but including cost of materials labour usage charges complete as per specificationscomplete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 0.083
60 Vol 2 PNo 99 ITNo 2.11 202324 Providing Honne wood frames of doors windows clerestory windows ventilators and other frames wrought framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps) but including cost of materials labour usage charges complete as per specifications.complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 0.889
61 Vol 2 PNo 104 ITNo 12.51 202324 KSRB 9 27.1 Fixing of door frame in an existing opening including embeeding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1 3 6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame making good the damages to walls and floor as required and disposal of the debries with lead upto 50 m. including cost of materials labour charges complete as per specifications.complete with all lead and lifts and as per the directions of Engineer in charge of the work No 13
62 Vol 2 PNo 104 ITNo 12.51 202324 Providing and fixing in position Honne wood half panelled shutters at bottom and half glazed at top for window shutters with stiles and rails of 35mm. thick 75mm wide in two halves with panels of 25mm thick 3mm thick reeded glass for top panels fixed with wooden beading including cost of materials labour charges usage charges complete as per specifications. (excluding cost of fixtures) complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 2.73
63 Vol 2 PNo 103 ITNo 12.36 202324 Providing and fixing in position Honne wood half panelled shutters at bottom and half glazed at top for window shutters with stiles and rails of 35mm. thick 75mm wide in two halves with panels of 25mm thick 3mm thick reeded glass for top panels fixed with wooden beading including cost of materials labour charges usage charges complete as per specifications. (excluding cost of fixtures)complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 7.1
64 Vol 2 PNo 108 ITNo 12.83.2 202324 Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance 1mm) with wall thickness 2.0 mm (plus or minus 0.2 mm) corners of the door frame to be Jointed with galvanized brackets and stainless steel screws joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (plus or minus 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer in charge 42x50 mm PVC Extruded section complete with all lead and lifts and as per the directions of Engineer in charge of the work M 24
65 Vol 2 PNo 111 ITNo 12.92 202324 Providing and fixing of Openable door made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) and lead free with gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile through out the openable frame. The frame having overall size of 60mm x 55mm with GI reinforcement of 1mm thickness and openable sash with overall size of 60mm x 102mm and GI reinforcement of 2mm thickness. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 34 mm. Windows shall be provided with 6mm plain float glass Standard hardware with 2D 3D hinge and Multi point locking system with Handle. Wall thickness of frame and sash shall be of 2mm 2.5mm. Maximum possible size – 900mm x 2400mm. (The cost is inclusive of all fixtures and separate charges for minor T and P's shall not be made)complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 5.67
66 Vol 2 PNo 200 ITNo 12.34.1 202324 Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete. 125x70x4 mm (ordinary type) complete with all lead and lifts and as per the directions of Engineer in charge of the work Each 51
67 Vol 2 PNo 105 ITNo 12.62 202324 Providing and fixing chromium plated brass handles of 100 125 mm with necessary screws complete with all lead and lifts and as per the directions of Engineer in charge of the work No 16
68 Vol 2 PNo 105 ITNo 12.60 202324 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws complete with all lead and lifts and as per the directions of Engineer in charge of the work No 16
69 Vol 2 PNo 105 ITNo 12.58 202324 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws complete with all lead and lifts and as per the directions of Engineer in charge of the work No 16
70 Vol 2 PNo 105 ITNo 12.59 202324 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI IS 3564 embossed on the body door weight upto 35 kg and door width upto 700 mm) with necessary accessories and screws complete with all lead and lifts and as per the directions of Engineer in charge of the work No 16
71 Vol 2 PNo 110 ITNo 12.90 202324 Providing and fixing of 3 track x 2 panel sliding windows made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile through out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass standard hardware and Multi point locking system with touch lock. Wall thickness of frame and sash shall be of 2mm 2.5mm. Maximum possible size – 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T and P's shall not be made) complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 60
72 Vol 2 PNo 86 ITNo 11.34B 202324 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings wooden frames with rawl plugs screws complete with all lead and lifts and as per the directions of Engineer in charge of the work Kg 600
73 Vol 2 PNo 85 ITNo 11.28 202324 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes channels plates etc. including welding grinding buffing polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete i c fixing the railing with necessary accessories and stainless steel dash fasteners stainless steel bolts etc. of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer in charge (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts bolts fasteners etc.) including cost of materials labour usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge. Kg 262.5
74 Vol 2 PNo 149 ITNo 15.1 202324 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace Chajjas Sunken portion of WC Bathroom cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400 Percentage and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats at 1.6 kg m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer at 150 g m2 and protection with 120gsm Geo textile over the waterproofing membrane. The finished cost to include surface preparation making coving at Junction Bore Packing treatment of construction joints completely as per specification.complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 31.89
82 Vol 2 PNo 41 ITNo 8.2.1 202324 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1 4 (1 cement 4 fine sand) including rounding off corners wherever required smooth rendering providing and removing scaffolding including cost of materials labour curing complete as per specifications and as per directions of Engineer in charge. Sqm 365.18000000000006
83 Vol 2 PNo 41 ITNo 8.1.1 202324 Providing 12 mm cement plaster with cement mortar 1 4 (1 cement 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering providing and removing scaffolding including cost of materials labour curing complete as per specifications and as per directions of Engineer in charge Sqm 373.40000000000003
84 Vol 2 PNo 42 ITNo 8.8 202324 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1 5 (1 cement 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1 6 (1 cement 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering providing and removing scaffolding including cost of materials labour curing complete as per specifications and as per directions of Engineer in charge Sqm 1053.9299999999998
85 Vol 2 PNo 50 ITNo 8.51 202324 Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Sqm 1427.33
87 Vol 2 PNo 60 ITNo 9.12.2 202324 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1 6 20 mm thick and joints finished with cement mortar 1 3 over existing cement concrete bed including cost of materials mortar labour curing complete as per specifications.complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 64.42
88 Vol 2 PNo 71 ITNo 10.14 202324 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS 15622 (thickness to be specified by the manufacturer) of approved make in all colours shades except burgundy bottle green black of any size as approved by Engineer in Charge in skirting risers of steps and dados over 12 mm thick bed of cement mortar 1 3 (1 cement 3 coarse sand) and jointing with grey cement slurry at 3.3kg m2 including pointing in white cement mixed with pigment of matching shadecomplete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 127.58
89 Vol 2 PNo 45 ITNo 8.25 202324 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt dust mortar drops and foreign matter including preparing the surface even and sand paper smooth cost of materials labour complete as per specifications and as per directions of Engineer in charge. Sqm 365.18000000000006
90 Vol 2 PNo 46 ITNo 8.31 202324 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade New work (Two coats applied at 1.43 ltr 10 m2 over and including priming coat of exterior primer applied at 2.20 kg 10 m2) with paint of approved quality to give an even shade after thoroughly brooming the surface to remove all dirt dust mortar drops and foreign matter including preparing the surface even and sand paper smooth cost of materials labour complete as per specifications and as per directions of Engineer in charge. Sqm 365.18000000000006
91 Vol 2 PNo 46 ITNo 8.33.1 202324 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Two coats applied on walls at 1.25 ltr 10 m2 over and including one coat of Special primer applied at 0.75 ltr 10 m2 with paint of approved quality to give an even shade after thoroughly brooming the surface to remove all dirt dust mortar drops and foreign matter including preparing the surface even and sand paper smooth cost of materials labour complete as per specifications and as per directions of Engineer in charge. Sqm 1427.33
92 Vol 2 PNo 99 ITNo 12.11 202324 Providing Honne wood frames of doors windows clerestory windows ventilators and other frames wrought framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps) but including cost of materials labour usage charges complete as per specifications.complete with all lead and lifts and as per the directions of Engineer in charge of the work. Cum 0.083
93 Vol 2 PNo 99 ITNo 12.11 202324 Providing Honne wood frames of doors windows clerestory windows ventilators and other frames wrought framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps) but including cost of materials labour usage charges complete as per specifications.complete with all lead and lifts and as per the directions of Engineer in charge of the work. Cum 0.889
94 Vol 2 PNo 104 ITNo 12.51 202324 KSRB 9 27.1 Fixing of door frame in an existing opening including embeeding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1 3 6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame making good the damages to walls and floor as required and disposal of the debries with lead upto 50 m. including cost of materials labour charges complete as per specifications.complete with all lead and lifts and as per the directions of Engineer in charge of the work No 13
95 Vol 2 PNo 103 ITNo 12.36 202324 Providing and fixing in position Honne wood half panelled shutters at bottom and half glazed at top for window shutters with stiles and rails of 35mm. thick 75mm wide in two halves with panels of 25mm thick 3mm thick reeded glass for top panels fixed with wooden beading including cost of materials labour charges usage charges complete as per specifications. (excluding cost of fixtures)complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 2.73
96 Vol 2 PNo 103 ITNo 12.36 202324 Providing and fixing in position Honne wood half panelled shutters at bottom and half glazed at top for window shutters with stiles and rails of 35mm. thick 75mm wide in two halves with panels of 25mm thick 3mm thick reeded glass for top panels fixed with wooden beading including cost of materials labour charges usage charges complete as per specifications. (excluding cost of fixtures)complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 7.1
97 Vol 2 PNo 108 ITNo 12.83.2 202324 Providing and fixing factory made UPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance plus or minus1mm) with wall thickness 2.0 mm (plus or minus 0.2 mm) corners of the door frame to be Jointed with galvanized brackets and stainless steel screws joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (plus or minus 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer in charge 42x50 mm PVC Extruded sectioncomplete with all lead and lifts and as per the directions of Engineer in charge of the work M 24
98 Vol 2 PNo 111 ITNo 12.92 202324 Providing and fixing of Openable door made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) and lead free with gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile through out the openable frame. The frame having overall size of 60mm x 55mm with GI reinforcement of 1mm thickness and openable sash with overall size of 60mm x 102mm and GI reinforcement of 2mm thickness. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 34 mm. Windows shall be provided with 6mm plain float glass Standard hardware with 2D 3D hinge and Multi point locking system with Handle. Wall thickness of frame and sash shall be of 2mm 2.5mm. Maximum possible size – 900mm x 2400mm. (The cost is inclusive of all fixtures and separate charges for minor T and P's shall not be made)complete with all lead and lifts and as per the directions of Engineer in charge of the work. Sqm 5.67
99 Vol 2 PNo 200 ITNo 20.34.1 202324 Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete. 125x70x4 mm (ordinary type) complete with all lead and lifts and as per the directions of Engineer in charge of the work Each 51
100 Vol 2 PNo 105 ITNo 12.62 202324 Providing and fixing chromium plated brass handles of 100 125 mm with necessary screws complete with all lead and lifts and as per the directions of Engineer in charge of the work. No 16
101 Vol 2 PNo 105 ITNo 12.60 202324 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws complete with all lead and lifts and as per the directions of Engineer in charge of the work. No 16
102 Vol 2 PNo 105 ITNo 12.58 202324 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws complete with all lead and lifts and as per the directions of Engineer in charge of the work No 16
103 Vol 2 PNo 105 ITNo 12.59 202324 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI IS 3564 embossed on the body door weight upto 35 kg and door width upto 700 mm) with necessary accessories and screws complete with all lead and lifts and as per the directions of Engineer in charge of the work. No 16
104 Vol 2 PNo 110 ITNo 12.90 202324 Providing and fixing of 3 track x 2 panel sliding windows made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile through out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass standard hardware and Multi point locking system with touch lock. Wall thickness of frame and sash shall be of 2mm 2.5mm. Maximum possible size – 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T and P's shall not be made)complete with all lead and lifts and as per the directions of Engineer in charge of the work. Sqm 60
105 Vol 2 PNo 86 ITNo 11.31B 202324 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings wooden frames with rawl plugs screws complete with all lead and lifts and as per the directions of Engineer in charge of the work. Kg 600
106 Vol 2 PNo 85 ITNo 11.25 202324 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes channels plates etc. including welding grinding buffing polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete i c fixing the railing with necessary accessories and stainless steel dash fasteners stainless steel bolts etc. of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer in charge (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts bolts fasteners etc.) including cost of materials labour usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge Kg 262.5
107 Vol 2 PNo 149 ITNo 15.1 202324 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace Chajjas Sunken portion of WC Bathroom cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400 Percentage and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats at 1.6 kg m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer at 150 g m2 and protection with 120gsm Geo textile over the waterproofing membrane. The finished cost to include surface preparation making coving at Junction Bore Packing treatment of construction joints completely as per specification.complete with all lead and lifts and as per the directions of Engineer in charge of the work. Sqm 31.89
115 Vol 2 PNo 41 ITNo 8.2.1 202324 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1 4 (1 cement 4 fine sand) including rounding off corners wherever required smooth rendering providing and removing scaffolding including cost of materials labour curing complete as per specifications and as per directions of Engineer in charge. Sqm 123.19
116 Vol 2 PNo 41 ITNo 8.1.1 202324 Providing 12 mm cement plaster with cement mortar 1 4 (1 cement 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering providing and removing scaffolding including cost of materials labour curing complete as per specifications and as per directions of Engineer in charge Sqm 42.589999999999996
117 Vol 2 PNo 42 ITNo 8.8 202324 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1 5 (1 cement 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1 6 (1 cement 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering providing and removing scaffolding including cost of materials labour curing complete as per specifications and as per directions of Engineer in charge. Sqm 261.43
118 Vol 2 PNo 50 ITNo 8.51 202324 Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Sqm 304.02
120 Vol 2 PNo 64 ITNo 9.30 202324 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1 6 20 mm thick and joints finished with cement mortar 1 3 over existing cement concrete bed including cost of materials mortar labour curing complete as per specifications.complete with all lead and lifts and as per the directions of Engineer in charge of the work. Sqm 22.88
121 Vol 2 PNo 45 ITNo 8.25 202324 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt dust mortar drops and foreign matter including preparing the surface even and sand paper smooth cost of materials labour complete as per specifications and as per directions of Engineer in charge Sqm 123.19
122 Vol 2 PNo 46 ITNo 8.31 202324 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade New work (Two coats applied at 1.43 ltr 10 m2 over and including priming coat of exterior primer applied at 2.20 kg 10 m2) with paint of approved quality to give an even shade after thoroughly brooming the surface to remove all dirt dust mortar drops and foreign matter including preparing the surface even and sand paper smooth cost of materials labour complete as per specifications and as per directions of Engineer in charge. Sqm 123.19
123 Vol 2 PNo 46 ITNo 8.33.1 202324 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Two coats applied on walls at 1.25 ltr 10 m2 over and including one coat of Special primer applied at 0.75 ltr 10 m2 with paint of approved quality to give an even shade after thoroughly brooming the surface to remove all dirt dust mortar drops and foreign matter including preparing the surface even and sand paper smooth cost of materials labour complete as per specifications and as per directions of Engineer in charge. Sqm 304.02
124 Vol 2 PNo 99 ITNo 12.11 202324 Providing Honne wood frames of doors windows clerestory windows ventilators and other frames wrought framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps) but including cost of materials labour usage charges complete as per specifications.complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 0.000
125 Vol 2 PNo 104 ITNo 12.51 202324 KSRB 9 27.1 Fixing of door frame in an existing opening including embeeding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1 3 6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame making good the damages to walls and floor as required and disposal of the debries with lead upto 50 m. including cost of materials labour charges complete as per specifications.complete with all lead and lifts and as per the directions of Engineer in charge of the work. No 2
126 Vol 2 PNo 103 ITNo 12.36 202324 Providing and fixing in position Honne wood half panelled shutters at bottom and half glazed at top for window shutters with stiles and rails of 35mm. thick 75mm wide in two halves with panels of 25mm thick 3mm thick reeded glass for top panels fixed with wooden beading including cost of materials labour charges usage charges complete as per specifications. (excluding cost of fixtures)complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 1.03
127 Vol 2 PNo 108 ITNo 12.83.2 202324 Providing and fixing factory made UPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance plus or minus1mm) with wall thickness 2.0 mm (plus or minus 0.2 mm) corners of the door frame to be Jointed with galvanized brackets and stainless steel screws joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (plus or minus 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer in charge 42x50 mm PVC Extruded sectioncomplete with all lead and lifts and as per the directions of Engineer in charge of the work. M 12
128 Vol 2 PNo 111 ITNo 12.92 202324 Providing and fixing of Openable door made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) and lead free with gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile through out the openable frame. The frame having overall size of 60mm x 55mm with GI reinforcement of 1mm thickness and openable sash with overall size of 60mm x 102mm and GI reinforcement of 2mm thickness. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 34 mm. Windows shall be provided with 6mm plain float glass Standard hardware with 2D 3D hinge and Multi point locking system with Handle. Wall thickness of frame and sash shall be of 2mm 2.5mm. Maximum possible size – 900mm x 2400mm. (The cost is inclusive of all fixtures and separate charges for minor T and P's shall not be made)complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 3.78
129 Vol 2 PNo 200 ITNo 20.34.1 202324 Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete. 125x70x4 mm (ordinary type)complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 4
130 Vol 2 PNo 105 ITNo 12.62 202324 Providing and fixing chromium plated brass handles of 100 125 mm with necessary screws complete with all lead and lifts and as per the directions of Engineer in charge of the work. No 2
131 Vol 2 PNo 105 ITNo 12.60 202324 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws complete with all lead and lifts and as per the directions of Engineer in charge of the work. No 2
132 Vol 2 PNo 105 ITNo 12.58 202324 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws complete with all lead and lifts and as per the directions of Engineer in charge of the work No 2
133 Vol 2 PNo 105 ITNo 12.59 202324 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI IS 3564 embossed on the body door weight upto 35 kg and door width upto 700 mm) with necessary accessories and screws complete with all lead and lifts and as per the directions of Engineer in charge of the work. No 2
134 Vol 2 PNo 110 ITNo 12.90 202324 Providing and fixing of 3 track x 2 panel sliding windows made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile through out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass standard hardware and Multi point locking system with touch lock. Wall thickness of frame and sash shall be of 2mm 2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T and P's shall not be made) complete with all lead and lifts and as per the directions of Engineer in charge of the work. Sqm 2.4
135 Vol 2 PNo 86 ITNo 11.34B 202324 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings wooden frames with rawl plugs screws complete with all lead and lifts and as per the directions of Engineer in charge of the work. Sqm 24
136 Vol 2 PNo 85 ITNo 11.28 202324 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes channels plates etc. including welding grinding buffing polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete i c fixing the railing with necessary accessories and stainless steel dash fasteners stainless steel bolts etc. of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer in charge (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts bolts fasteners etc.) including cost of materials labour usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge. Sqm 262.5
137 Vol 2 PNo 149 ITNo 15.1 202324 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace Chajjas Sunken portion of WC Bathroom cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400 Percentage and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats at 1.6 kg m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer at 150 g m2 and protection with 120gsm Geo textile over the waterproofing membrane. The finished cost to include surface preparation making coving at Junction Bore Packing treatment of construction joints completely as per specification.complete with all lead and lifts and as per the directions of Engineer in charge of the work. Sqm 348.01
138 Vol 2 PNo 82 ITNo 11.16.2 202324 Providing and fixing Steel work in built up tubular (round square or rectangular hollow tubes etc.) trusses etc. including cutting hoisting fixing in position and applying a priming coat of approved steel primer including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials labour usage charges of machinery complete with all lead and lifts and as per the directions of Engineer in charge of the work. Kg 7812.64
139 Vol 2 PNo 21 ITNo 7.5.1 202324 Providing and fixing corrugated G.S. sheet roofing including vertical curved surface fixed with polymer coated J or L hooks bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete as per design drawings (up to any pitch in horizontal vertical or curved surfaces) excluding the cost of purlins rafters and trusses and including cutting to size and shape wherever required as per the direction of Engineer in charge. 1.60 mm thick with zinc coating not less than 350 g m2complete with all lead and lifts and as per the directions of Engineer in charge of the work. Sqm 390.63
141 Vol 2 PNo 82 ITNo 11.16.2 202324 Providing and fixing Steel work in built up tubular (round square or rectangular hollow tubes etc.) trusses etc. including cutting hoisting fixing in position and applying a priming coat of approved steel primer including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials labour usage charges of machinerycomplete with all lead and lifts and as per the directions of Engineer in charge of the work. Sqm 9161.6
142 Vol 2 PNo 38 ITNo 7.67.2 202324 Providingfabricating and fixing Profiled Poly Urethane insulated Roof(PUFSheet) having modular density 40kg m2 and size 1.06m width and 7.60m length sheets roof having external sheet of 0.5mm steel bottom sheet of 0.40mm steel with powder coated finish. The precoated sheet shall be of minimum 240MPa steel conforming to IS 14246 1995 and shal have zinc coating with minimum 120gsm as per IS 277 1992.The roofing system shall have suitable water proof over lapping arrangments and GRIHA ceritifed.The fasting shall be of self tapping screws of required length with PVC head along with washer pre painted aluminium cap unit with build in seal arrangments. The entire roof shall be firmly fastened to the existng frame including all lead and lifts loading and unloading usage charges of machinery and equipments transportation chargeslabour charges and all other incidental charges etc.complete as per standard technical detailed specifications and as directed by the Engineer in charge of the work. 1.60 mm thick with zinc coating not less than 350 g m2 50mm thicknesscomplete with all lead and lifts and as per the directions of Engineer in charge of the work. Sqm 322
143 Vol 3 PNo 74 ITNo 8.42.7 202324 Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway Sidewalls and gutters fixed with CM 1 3 fixed and finsihed in line as per direction of Engineer in charge. (The cost of PCC shall be paid extra) 300 x 300 x 150 mm sizecomplete with all lead and lifts and as per the directions of Engineer in charge of the work. M 163
144 Vol 2 PNo 63 ITNo 8.42.7 202324 Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M 30 grade made of C and D waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand filling the joints with fine sand etc. all complete as per the direction of Engineer in charge. Sqm 609.33
145 Vol 2 PNo 21 ITNo 7.5.1 202324 Providing and fixing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete as per design drawings.0.63 mm thick with zinc coating not less than 275 g m2complete with all lead and lifts and as per the directions of Engineer in charge of the work M 23
147 Vol 5 SR 202425 PNo A45 ITNo 684 PVC pipes of 8 Kg cm2 for 200mm complete with all lead and lifts and as per the directions of Engineer in charge of the work. M 30
148 Vol 5 SR 202425 PNo A45 ITNo 684 PVC pipes of 8 Kg cm2 for 160mmcomplete with all lead and lifts and as per the directions of Engineer in charge of the work. M 109.5
149 Vol 5 SR 202425 PNo A45 ITNo 683 PVC pipes of 8 Kg cm2 for 110mm complete with all lead and lifts and as per the directions of Engineer in charge of the work. M 89.4
150 Vol 2 SR 202122 PNo 120 ITNo 13.22.1.1 Providing and fixing PTMT grating of approved quality and colour.Circular type 100 mm nominal diacomplete with all lead and lifts and as per the directions of Engineer in charge of the work. M 50
151 Vol 2 SR 202122 PNo 128 ITNo 14.29 Providing and fixing 100 mm sand cast Iron grating for gully trap. complete with all lead and lifts and as per the directions of Engineer in charge of the work. No 25
152 Vol 2 SR 202425 PNo A34 ITNo 735 S.C.I. gully or nahani grating 100 mm diacomplete with all lead and lifts and as per the directions of Engineer in charge of the work. No 70
153 Vol 2 SR 202122 PNo 117 ITNo 13.2.1 Providing and fixing brass bib cock of approved quality 15 mm nominal bore complete with all lead and lifts and as per the directions of Engineer in charge of the work. No 35
154 Vol 2 SR 202122 PNo 121 ITNo 13.28.3 Providing and fixing PTMT extension nipple for water tank pipe fittings of approved quality and colour. 25mm nominal bore weighing not less than 62 g complete with all lead and lifts and as per the directions of Engineer in charge of the work. No 75
155 Vol 2 SR 202122 PNo 121 ITNo 13.27.2 Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts collar and bush of approved quality and colour. 15 mm nominal bore with 45 cm length complete with all lead and lifts and as per the directions of Engineer in charge of the work. No 80
156 Vol 2 SR 202122 PNo 117 ITNo 13.1.1 Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee including cutting and threading the pipe etc. complete 25 to 40 mm nominal borecomplete with all lead and lifts and as per the directions of Engineer in charge of the work. No 80
157 Vol 2 SR 202122 PNo 117 ITNo 13.3.1 Providing and fixing brass stop cock of approved quality 15 MM Nominal bore complete with all lead and lifts and as per the directions of Engineer in charge of the work. No 35
158 Vol 2 SR 202122 PNo 117 ITNo 13.4.1 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) complete with all lead and lifts and as per the directions of Engineer in charge of the work. No 15
159 Vol 2 SR 202122 PNo 117 ITNo 13.6.1.1 Providing and fixing gun metal non return valve of approved quality (screwed end) 25 mm nominal bore Horizontal Typecomplete with all lead and lifts and as per the directions of Engineer in charge of the work. No 10
160 Vol 5 SR 202425 PNo 113 ITNo 10.1.1 Providing PVC ringtite pipes conforming to IS 4985 2000 with latest amendments and conveying to worksite rolling and lowering into trenches laying true to line and level and perfect linking at joints testing and commissioning including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type with all labour with all lead and lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For PVC pipes 25mm dia 10 kg sqcm and class 5 complete with all lead and lifts and as per the directions of Engineer in charge of the work. M 208
161 Vol 5 SR 202425 PNo 116 ITNo 10.8.1 Supplying of special moulded variety PVC couplers as per IS 7834 1987 and fabricated as per IG124 1984 with ISI mark and with its latest amendments to walk site 25mm dia PVC couplerscomplete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 74
162 Vol 5 SR 202425 PNo 117 ITNo 10.9.1 Supply and delivery at site special moulded variety PVC elbows as per IS 7834 1987 and fabricated as per IG124 1984 with ISI mark with its latest amendments 25 mm dia PVC Elbowscomplete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 25
163 Vol 5 SR 202425 PNo 117 ITNo 10.10.1 Supply and delivery at site special moulded variety PVC tee as per IS 7834 1987 and fabricated as per IG124 1984 with ISI mark with its latest amendments 25 mm dia PVC Teecomplete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 20
164 Vol 5 SR 202425 PNo 41 ITNo 2.79.2 Supply of PPR Gate valve confirming to IS 15801 2008 and DIN Standards 8077 8092 PPR Gate valve 25mm complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 8
165 Vol 2 SR 202425 PNo 123 ITNo 13.34A Providing and fixing rectangular high density polyethylene water storage loft tank with cover conforming to ISI 12701 colour of opaque white or as approved by Engineer in charge. The rate includes making necessary holes for inlet outlet and over flow pipes. The base support i c fittings and fixtures for tank shall be paid separately.complete with all lead and lifts and as per the directions of Engineer in charge of the work. L 4000
166 Vol 5 SR 202425 PNo 155 ITNo 13.3 Supply and delivery at site Accessories for Single Phase pumpset like SS Groove NipplesSS Studs and NutsScrew Clips and water proof Insulation Tape etc complete with ISI mark complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 1
167 Vol 2 SR 202425 PNo 137 ITNo 14.35.1 Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat and lid fixed with C.P. brass hinges and rubber buffers 10 litre low level flushing cistern with fitting and brackets 40 mm flush bend 20 mm over flow pipe with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets cutting and making good the walls and floors wherever required White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend.complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 4
168 Vol 2 SR 202122 PNo 131 ITNo 14.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid 10 litre low level white vitreous china flushing cistern and C.P. flush bend with fittings and C.I. brackets 40 mm flush bend overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 12
169 Vol 2 SR 202122 PNo 131 ITNo 14.4.1 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete including painting of fittings and brackets cutting and making good the walls and floors wherever required One urinal basin with 5 litre white P.V.C. automatic flushing cistern Schedule of rates complete with all lead and lifts and as per the directions of Engineer in charge of the work. Unit 9
170 Vol 2 SR 202122 PNo 136 ITNo 14.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Schedule of rates complete with all lead and lifts and as per the directions of Engineer in charge of the work. Unit 12
171 Vol 2 SR 202122 PNo 132 ITNo 14.7.1 Providing and fixing wash basin with C.I. brackets 15 mm C.P. brass pillar taps 32 mm C.P. brass waste of standard pattern including painting of fittings and brackets cutting and making good the walls wherever require White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps Schedule of rates complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 12
172 Vol 2 SR 202425 PNo 201 ITNo 16.40.3 Providing and constructing of Machinehole chambers conical in shape at top with CC 1 3 6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15m alround the chamber and brick masonry in C.M 1 4 plaster with bricks of approved quality and CM plaster 1 3 proportion 12mm thick inside and outside except for the conical surface outside where the thickness of plaster shall be 20 mm thick with 1 to 6 slope in the concrete towards the central drain finished smooth and fixing of pipes in CC 1 2 4 with graded metal of 20 mm and down size including Providing and fixing SFRC Machinehole frame and cover confoming to IS 12592(Part I) 1988 and IS 12592(Part II) 1991 with latest amendments in CC 1 2 4 Providing and fixing of plastic foot steps staggered at 30cms apart as directed watering curingbarricading danger lighting pouring tar over M.H. frame and cover cost of tar shoring strutting dewatering engraving Machinehole No. on the inner and outer conical surface etc. as per the drawing with all lead and lift for various diameters and depths noted below. With Table Moulded Bricks and Medium Duty cover and frame.For 1.2m dia Constructing Table Moulded Bricks Machinehole 1.2 m internal dia 3.0M depth and Medium duty SFRC cover and frame complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 1
173 CP 1 ITNO 1.1.1 ELE SR Supplying heavy gauge PVC conduit pipe . mm dia..mm thick confirming to IS 2509 with suitable size bends metal PVC Junction boxes adhesive paste etc. and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures run with 18SWG GI fish wire wherever necessary.19 20 mm dia 2 mm thick complete with all lead and lifts and as per the directions of Engineer in charge of the work M 225
174 CP 1 ITNO 1.1.2 ELE SR Supplying heavy gauge PVC conduit pipe mm dia..mm thick confirming to IS 2509 with suitable size bends metal PVC Junction boxes adhesive paste etc. and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures run with 18SWG GI fish wire wherever necessary.25 mm dia 2 mm thick complete with all lead and lifts and as per the directions of Engineer in charge of the work. M 315
175 CP 1 ITNO 1.2.1 ELE SR Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends metal junction boxes adhesive paste etc.by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary.19 20 mm dia 2 mm thick complete with all lead and lifts and as per the directions of Engineer in charge of the work. M 135
176 CP 1 ITNO 1.2.2 ELE SR Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends metal junction boxes adhesive paste etc.by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary.25 mm dia 2 mm thick complete with all lead and lifts and as per the directions of Engineer in charge of the work. M 165
177 CP 1 ITNO 1.5.1 ELE SR Supplying and fixing PVC metal conduit Deep junction box 19 20 mm deep Junction box complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 45
178 CP 1 ITNO 1.5.2 ELE SR Supplying and fixing PVC metal conduit Deep junction box 25 mm deep Junction box complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 60
179 CP 1 ITNO 1.12 ELE SR Supplying And Fixing Metal Fan Box with Round Hook complete with all lead and lifts and as per the directions of Engineer in charge of the work. No 31
180 Code180 Supply and laying of under floor(concealed) race ways manufactured from1.5mm thick cover and base (including partitions for multi compartment raceways) zero spangle pre galvanized sheet steel with 275GSM(36.67microns) coating mass cover and base MIG welded together. the length of raceways shall be2.5meters per length with single accessories acting as duct connector including fastening clamps and vertical access boxes and with all required connected accessories complete and load bearing capacity in line with EN 50085 2 2 50 x 38 x 2500mm 1 compartment complete with all lead and lifts and as per the directions of Engineer in charge of the work. M 240
181 CP 2 ITNO 2.2.1 ELE SR Supplying and wiring adopting loop system in existing PVC Conduit casing capping using 2x1.5Sqmm (Phase and Neutral) and 1x1.0 Sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS 694 and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet gang box the other end of the wires shall be terminated with sufficient loose length in a wood PVC round block. complete for each outlet.Short point upto 3Mtr from tapping point to out let via switch complete with all lead and lifts and as per the directions of Engineer in charge of the work. Point 43
182 CP 2 ITNO 2.2.2 ELE SR Supplying and wiring adopting loop system in existing PVC Conduit casing capping using 2x1.5Sqmm (Phase and Neutral) and 1x1.0 Sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS 694 and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet gang box the other end of the wires shall be terminated with sufficient loose length in a wood PVC round block. complete for each outlet.Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch complete with all lead and lifts and as per the directions of Engineer in charge of the work. Point 43
183 CP 2 ITNO 2.2.3 ELE SR Supplying and wiring adopting loop system in existing PVC Conduit casing capping using 2x1.5Sqmm (Phase and Neutral) and 1x1.0 Sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS 694 and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet gang box the other end of the wires shall be terminated with sufficient loose length in a wood PVC round block. complete for each outlet.Long point above 6Mtr upto 10Mtr from tapping point to out let via switch complete with all lead and lifts and as per the directions of Engineer in charge of the work. Point 62
184 CP 2 ITNO 2.3.1 ELE SR Wiring for lighting power circuit using one of FRLS PVC insulated 1100V grade multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694 20101 mm2 complete with all lead and lifts and as per the directions of Engineer in charge of the work. M 540
185 CP 2 ITNO 2.3.2 ELE SR Wiring for lighting power circuit using one of FRLS PVC insulated 1100V grade multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694 20101.5 mm2 complete with all lead and lifts and as per the directions of Engineer in charge of the work. M 600
186 CP 2 ITNO 2.3.3 ELE SR Wiring for lighting power circuit using one of FRLS PVC insulated 1100V grade multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694 20102.5 mm2 complete with all lead and lifts and as per the directions of Engineer in charge of the work. M 900
187 CP 2 ITNO 2.3.4 ELE SR Wiring for lighting power circuit using one of FRLS PVC insulated 1100V grade multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694 2010 4 mm2 complete with all lead and lifts and as per the directions of Engineer in charge of the work. M 540
188 CP 2 ITNO 2.3.5 ELE SR Wiring for lighting power circuit using one of FRLS PVC insulated 1100V grade multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694 2010 6 mm2 complete with all lead and lifts and as per the directions of Engineer in charge of the work. M 540
189 CP 3 ITNO 3.4.1 ELE SR Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick Stone C.C wall 1 2 Way complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 6
190 CP 3 ITNO 3.4.2 ELE SR Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick Stone C.C wall 3 Way complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 9
191 CP 3 ITNO 3.4.3 ELE SR Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick Stone C.C wall 6 Way complete with all lead and lifts and as per the directions of Engineer in charge of the work Each 9
192 CP 3 ITNO 3.4.4 ELE SR Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick Stone C.C wall 8 Way complete with all lead and lifts and as per the directions of Engineer in charge of the work Each 21
193 CP 3 ITNO 3.4.5 ELE SR Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick Stone C.C wall 10 12 Way complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 24
194 CP 3 ITNO 3.5.1 ELE SR Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws bolts nuts etc. complete on the existing metal PVC box. 3 Module complete with all lead and lifts and as per the directions of Engineer in charge of the work Each 6
195 CP 3 ITNO 3.5.2 ELE SR Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws bolts nuts etc. complete on the existing metal PVC box. 3 Module complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 9
196 CP 3 ITNO 3.5.3 ELE SR Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws bolts nuts etc. complete on the existing metal PVC box. 6 Module complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 9
197 CP 3 ITNO 3.5.4 ELE SR Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws bolts nuts etc. complete on the existing metal PVC box. 8 Module complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 21
198 CP 3 ITNO 3.5.5 ELE SR Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws bolts nuts etc. complete on the existing metal PVC box. 10 12 Module complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 24
199 CP 3 ITNO 3.6.1 ELE SR Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6A One Way Switch complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 90
200 CP 3 ITNO 3.6.2 ELE SR Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6A Two Way Switch complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 15
201 CP 3 ITNO 3.6.4 ELE SR Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293 Stepped Fan Regulator Two Module complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 31
202 CP 3 ITNO 3.6.8 ELE SR Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293 16A One Way Switch complete with all lead and lifts and as per the directions of Engineer in charge of the work Each 12
203 CP 3 ITNO 3.6.11 ELE SR Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6 16A Universal Socket complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 60
204 CP 3 ITNO 3.6.13 ELE SR Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293 RJ45 I.O Outlet Cat 6 complete with all lead and lifts and as per the directions of Engineer in charge of the work Each 330
205 CP 3 ITNO 3.6.13 ELE SR Supplying and fixing 32A security and energy saving DP switch with key tag suitable to operate on 230 V 50HZ AC supply and completely wired on existing box. complete with all lead and lifts and as per the directions of Engineer in charge of the work Each 12
206 CP 3 ITNO 3.6.10 ELE SR Supplying And fixing replacing of 6 16 32A electrical accessories on existing switch board.6A Bakelite Ceiling Rose complete with all lead and lifts and as per the directions of Engineer in charge of the work. No 90
207 CP 3 ITNO 3.14.6 ELE SR Supplying And fixing replacing of 6 16 32A electrical accessories on existing switch board.6A Batten Holder complete with all lead and lifts and as per the directions of Engineer in charge of the work. No 69
208 CP 5 ITNO 5.7.4 ELE SR Supplying and fixing of Porcelain fuse channel with cut out on existing wooden panel using necessary nuts bolts and washers 100 A complete with all lead and lifts and as per the directions of Engineer in charge of the work. No 4
209 CP 5 ITNO 5.14.7 ELE SR Supplying and fixing Moulded Case Circuit Breaker (MCCB)over the existing wood panel board using necessary screwsbolts nuts necessary phase separatorshandle and wiring complete. Protection of Overload and Short circuit with adjustable thermal magnetic release Micro processor release shall have Earth Fault as per IS IEC 60947 2 . (Icu equal 100 Percentagelcs). In 4PMCCB all Poles should have protection for Short Cicrcuit Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non Priority loads must be available in the MCCB. MCCB shall be provided with double insulation(insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. FOUR Pole 100 A 25 kA complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 1
210 CP 5 ITNO 5.16.3 ELE SR Supplying and fixing regular MCCB distribution Panel confirming to IS IEC61439 3 and IK09 tested as per IS IEC62262 with minimum IP43 protection provided with Polyurethane (PUR) gasket with suitable earthing system onwall wood board flush mounting using required cl A bolts nuts etc.with provision for fixing of suitable type capacity MCCB's as an incomer for 3phase Double door with necessary busbar completely wired to use on 440V 3phase 4wire powder coated painting etc. complete with a provision for fixing of single three phase suitable capacity MCB's as outgoings confirming to IS IEC 60898 2.12 Way complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 4
211 CP 5 ITNO 5.17.4 ELE SR Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C'Type curve indicator ON OFF energy cross 3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6 32 A DP complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 13
212 CP 5 ITNO 5.17.7 ELE SR Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C'Type curve indicator ON OFF energy cross 3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6 32 A TPN complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 7
213 CP 5 ITNO 5.17.9 ELE SR Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C'Type curve indicator ON OFF energy cross 3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 50 63 A TPN complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 6
214 CP 5 ITNO 5.18.3 ELE SR Supplying and fixing regular MCB distribution boards on wall ood board flush mounting using required clamps bolts nuts etc. with provision for fixing suitable type capacity MCB's single phase 3 phase single door with powder coated painting Made out of 14SWG MS enclosure.I Single Door 8 Way SP and N complete with all lead and lifts and as per the directions of Engineer in charge of the work Each 4
215 CP 5 ITNO 5.19.1 ELE SR Supplying fixing and wiring Residual current circuit breaker (RCCB) 240 450V upto 300mA sensitivity on existing wood panel board.16A 25A 2 pole complete with all lead and lifts and as per the directions of Engineer in charge of the work Each 4
216 CP 5 ITNO 5.19.4 ELE SR Supplying fixing and wiring Residual current circuit breaker (RCCB) 240 450V upto 300mA sensitivity on existing wood panel board. 32 40A 4 pole complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 4
217 CP 5 ITNO 5.21 ELE SR Supplying fixing and wiring earth leakage relay with core balanced current transformer suitable forsingle phase 50HZ AC with latest microcontroller based digital readout of percentage leakage current programmable delay auto manual reset facility suitableto mount on DIN rail flush mounting on panel board. complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 1
218 CP 5 ITNO 5.22 ELE SR Supplying fixing and wiring 0 to 600V 96x96mm AC Voltmeter on existing panel wood board. complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 1
219 CP 5 ITNO 5.25 ELE SR Supplying fixing and wiring 0 to 100A Direct Reading AC analog type Ammeter complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 1
220 CP 5 ITNO 5.27 ELE SR Supplying fixing and wiring rotary selector switch suitable for Ammeter complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 1
221 CP 5 ITNO 5.28 ELE SR Supplying fixing and wiring rotary selector switch suitable for Voltmeter complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 1
222 CP 5 ITNO 5.29 ELE SR Supplying fixing and wiring 3 Phase Digital Ammeter Voltmeter complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 1
223 CP 5 ITNO 5.30 ELE SR Supplying fixing and wiring Electronic Trivector Meter(ETV) 5to 32 63A three phase 4wire whole current class 1Accuracy Energy Meter. complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 1
224 CP 5 ITNO 5.37 ELE SR Supplying fixing and wiring heavy duty low voltage capacitors conforming to IS2834.3 phase400 440Vgrade for power factor improvement of rotating machineries like induction motor. complete with all lead and lifts and as per the directions of Engineer in charge of the work. KVAR 5
225 CP 5 ITNO 5.38 ELE SR Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230 440VAC. 50 HZ 12 24V D.C. complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 4
226 CP 5 ITNO 5.41.2 ELE SR Supplying and fixing angle iron frame work fabricated out of M.S. angle iron..and M.S.Flat......with boltswashers etc.and painted with 2 coats of red oxide and then two coats of approved paint. 50 x 50 x 6 mm complete with all lead and lifts and as per the directions of Engineer in charge of the work. M 5
227 CP 5 ITNO 5.44.3 ELE SR Supply and Installation Fixing Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid shock proof IP65(Weather Proof) rust proof dust proofwater proofcorrosion proof having internally Embedded gasket on both lid and flap suitable to fix Single Phase Three Phase Energy Meter insuitable base plate and having a provision for Fuse MCB cut out with suitable transparent hinged flap opening for operating MCB along with complete tamper proof SEALING facility.300 mm x 600 mm x 170 mm complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 2
228 CP 6 ITNO 6.1 ELE SR Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50HZ AC Supply complete 12 inch Sweep (300 mm) complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 16
229 CP 6 ITNO 6.4.1 ELE SR Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS 374 19 and also comply with IS 1709 1984 with latest amendment Rated voltage 220V 50HZ Rated power upto 35W plus 10 Percentage Rated current As per IS 374 19 Rated power factor 0.9 lagging(min) Rated speed 350 plus 10 Percentage RPMRated air delivery210 plus 10 Percentage Cubic Meter Minimum Rated service value 6.2CMM W Three Blades of blade leaf 1.05mm thick Aluminium Alloy sheet Class B motor insulation Bearing Two ball bearingsTop 6202Bottom6201as per IS specification Motor winding. Temp rise Shall not exceed 75deg Cover and ambient of 40 0C by resistance method at 245V Insulation resistance Shall not be less than Two Mega Ohms (2MOhms) Leakage current Should not exceed 210Micro AmpPower input W and currentAir Delivery and Fan Speed as per IS 374 2019 with latest amendment 2 year manufacturer Warranty. (BLDC fans) 48 inch Sweep 5 Star (1200 mm) complete with all lead and lifts and as per the directions of Engineer in charge of the work Each 31
230 CP 6 ITNO 6.7.2 ELE SR Supplying ......TR split Air conditioners suitable for operation on A C supply single phase 50HZ 230V with hermetically sealed compressor with air cooled condensermotor capacitor and start run capacitors relay and overload protector internal unit with one indoor and one outdoor unit The condenser unit will be placed outside the room on the terrace to avoid noise including standard length of suitable size copper tubing covered with insulationtube. (Highwall chorded cordless) suitable capacity 3 core sheathed PVC copper cable and a battery operated wireless remote unit 1.5 Ton capacity complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 11
231 CP 6 ITNO 6.12 ELE SR Installation charges for split type air conditioner with allied works for one indoor and one outdoor unit is tobe mounted on suitable Angle Iron support upto 3.0 Ton split cassette type A C. complete with all lead and lifts and as per the directions of Engineer in charge of the work Each 11
232 CP 10 ITNO 10.1.4 ELE SR Supplying installing testing and commissioning of Diesel Generator set with following specifications. Power rating as per standard reference condition as perBS5514 ISO3046 ISO8528 and IS 1002 ISO 3046 Generator set specifications Engine Diesel generating set are rated at1500RPM and conform to ISO8528 specifications. The engines are radiator cooled four stroke and multi cylinder conforming to ISO 3046. The scope of supplyi ncludesElectrical starter motor 12VDC Battery charging alternator Bosch fuel system with mechanical governor A1 Class. Spinon lubeoil filter Spinondual fuel filter with water separator Turbocharger Charge air cooler Silencer Hospital grade Dry type aircleaner Shutoff coil Flywheel and fly wheel housing First fill of lube oil and coolant Safety for low lube oil pressureSafety for high water temperature Permissible overload of 10percent for one hour in 12 hours of operation Capacity of Fuel Tank Fuel tank suitable for 8 hours of operation Alternator Alternator is suitable for operation at 1500 RPM415 V 0.8 pf lag suitable for 50 HZ 3 phase 4 wire systems conforming to IS IEC 600341. The Alternator is brush less type screen protected revolving field self excited self regulated through an AVR. The alternator shall have Plus or minus 1.0percent Voltage regulation max in static conditions IP 23 protections with insulation class F andH Mounting arrangement Engine and alternator are mounted on a common MS fabricated base frame with AVM pads Control Panel The control panel is manufactured with 14 16 gauge CRCA sheet and is powder coated for weatherproof and long lasting finish. The control panel consists of the following parts PS0500 Controller Aluminium bus bars with suitable capacity within outgoing terminals Indicating lA for Load On and Set Running Instrument fuses duly wired and ferruled MCCB of suitable rating with overload and short circuit protections Genset Controller microprocessor based generator set monitoring and control system. The control provides a simple operator interface to the generator set manual and remote start stop control shutdown fault indication and an LCD hour counter. The integration of all functions into a single control system provides enhanced reliability and performance compared to conventional generator set control systems. This control has been designed and tested to meet harsh environment in which gensets are typically applied. Features Functions protections 16 character x 2 line alphanumeric LCD display with LED Backlight. Operator interface Provide a record of most recent fault conditions. Fault history stored in the control non volatile memory Provide Alternator Data. Voltage 1 ph or 3 ph line to line and line to neutral voltage Current 1 ph or 3 ph kVA 3 ph and total Frequency Provide Engine Data Starting battery voltage Engine running hours Engine Temp Engine oil pressure Control includes provision for Service adjustment and calibration of DG control functions Voltage frequency selection Configurable input and output set up Meter calibration Engine controls Power Start operates on 12 VDC batteriesAuto start mode accepts a ground signal from remote devices to automatically start the DG set The remote start will also wake up the control system from sleep mode Engine Starting The control system supports automatic engine starting Primary and back up start disconnects are achieved by battery charging alternator feedback or main alternator output frequency. Controller provide configurable time delay of 0300 sees to start after remote start signal and time delay of 0 600secs prior to shut down after stop signal. Sleep mode increase battery life 30KVA 24kw complete with all lead and lifts and as per the directions of Engineer in charge of the work. Set 1
233 CP 10 ITNO 10.2.1 ELE SR Supply Erection testing and commissioning of AMF panel suitable for15 KVA to 30 KVA DG set. The panel is of cubical type base floor mounting control panel with hinged doors undrilled bottom gland plate aluminium Bus Bar with the accommodation for .....A 4 pole contactor for alternator with thermal O L relay..... A 4 pole contactor for mains HRC fuse for short circuit protection Microprocessor based AMF module with supply failure timer Restoration timer 3 impulse automatic engine start stop logic Mains generator voltage ....capacity bypass switch and frequency sensing PCC 1301controller with water temperature Lube oil pressure engine speed Voltage ampere Frequency kVA Running hour count No of starts Fault indication over under speed Fails to start Low oil pleasure High engine temperature Under over voltage over current Earth fault relay with indications for Mains on Load on Mains Battery charger on Push buttons AMF module by pass Mode Battery charger unit with inbuilt Auto Manual and Flat Boost facility. The complete set shall have sufficient safety and adhere to NEC NBC 2016 IEC CPWD specifications PCB norms and KSGEI Acts and Rules. complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 1
234 CP 11 ITNO 11.2.1 ELE SR Supplying and fixing retrofit type PL LED Lamp ...... W LED linear source with CCT 6500 degree K CRIgrater than 70 Percentage. efficacy grater than80 lumen per W lifegrater than 25000 burning hours and Compliance to IS 10322 IEC 60598 LM 79 and LM 80. The LED are driven by HF electronic driver integrated in the system with PF grater than0.95 power loss should less than 5 Percentage of lamp Wage. short circuit and open circuit protection to be integrated in the circuit THD less than 20 Percentage Life as per LM 79. The operating input voltage should be between 130 to275 V. Tested by NABL CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.8 9 W complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 15
235 CP 11 ITNO 11.3.2 ELE SR Supplying of .....feet PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours and 70 Percentage lumen maintenance with CRI grater than 80. Power Input 220 240V at 50 60HZ and Power factor grater than0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.LED light fitting 1 x 4ft 20 22 W complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 98
236 CP 11 ITNO 11.6.2 ELE SR Supplying of recess mounting non integral type.. LEDw luminaire comprising of pressure decast extruded aluminium housing with spring loaded false ceiling clamps Power LEDs with CCT 6500degree KCRIgrater than70 Percentage. efficacygrater than100lumen per W 120 degree beam spread lifegrater than 25000 burning hours and Compliance to IS10322 IEC60598 LM79 and LM80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level LEDs are driven by HF electronic driver integrated in a separate control gear assembly. with PFgrater than0.95 power loss shouldless than5 Percentageof lamp Wage.short circuit and open circuit protection to be integrated in the circuit THD less than 20 Percentage Life as per LM79. The operating input voltage should be between 130 to 275V. BIS Approved and Tested by NABL CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition LED modular down light 2'x2ft36 W complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 18
237 CP 12 ITNO 12.8.5 ELE SR Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material delivering superior light output Rated life Burning Hrs 50000 hr at Lumen Maintenance of 70 Percentage maximum light intensity should be between 60 degrees to 70 degrees. CCT grater than 5500K IP66 optical and electrical compartment and impact resistance of complete luminaire grater than IK08. Power Factor grater than0.9 with mains Surge Protection Min 5KV along with Over voltage Overload short circuit miss wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm.Universal Voltage driver to operate wide voltage range from 100V to 270V 50 60HZ application. Compliance to IS 10322 IEC 60598 LM 79 and LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiencygrater than1301m w nominal CRI grater than75. Luminaire manufacturer should have in house facility accredited by NABL CPRI and any Government certified agency and Design and Development facility certified by ISO 9001 2008. Housing with supplier word mark name shall be Engraved Embossing on the die cast housing Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer and Cree Nichia Lumileds Osram make LED Source.LED Streetlight 120W complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 1
238 CP 11 ITNO 11.9.2 ELE SR Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate clear glass material delivering superior light output Rated life Burning Hrs 50000 hr at Lumen Maintenance of 70 Percentage CCT grater than 5500K IP 66 optical and electrical compartment and impact resistance of complete luminaire grater than IK08. Power Factor grater than0.9 with mains Surge Protection Min 5KV along with Over voltage Overload short circuit miss wiring protection. Compatible for pole mauling with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100 V to 270V 50 60HZ application. Compliance to IS 10322 IEC 60598 LM 79 and LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ....... W System Power consumption. LED Efficiencygrater than 1301m w nominal CRI grater than75.Luminaire manufacturer should have in house facility accredited by NABL CPRI and any Government certified agency and Design and Development facility certified by ISO 9001 2008. Housing with supplier word mark name shall be Engraved Embossing on the die cast housing Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer and Cree Nichia Lumileds Osram make LED Source.LED Floodlight 100W complete with all lead and lifts and as per the directions of Engineer in charge of the work Each 4
239 CP 12 ITNO 12.2.3 ELE SR Supplying and fixing one of 230V Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote. complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 9
240 Code240 Supplying fixing wiring earth electrode for grounding conduitsI.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm allround the pipe to complete depth. The connection from the pipe to the conduit etc. is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts nuts washers and check nuts etc. the pipe shall have 16 through holes of 12 mm dia complete with all lead and lifts and as per the directions of Engineer in charge of the work. No 9
241 Code241 Supplying fixing and wiring earth electrode for grounding of lifts transformersDG sets etc.using 40mm dia 2.9mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode.The funnel should be enclosed in a CC chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150 mm all round with alternate layers of salt and charcoal from the bottom of the CC chamber.The connection from the electrode is to be established through GI strip using GI bolts and nuts complete with all lead and lifts and as per the directions of Engineer in charge of the work. No 6
242 Code242 GI strips for grounding connections using necessary fixing materials as required. 25 x 3 mm GI strip complete with all lead and lifts and as per the directions of Engineer in charge of the work. M 60
243 Code243 Copper strips for grounding connections using necessary fixing materials as required. 25 x 3 mm Copper strip complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 20
244 Code244 Supplying and Fixing of........mm dia class A GI pipe bracket upto 2 ms long bent at suitable angle and fixing to this bracket street light fitting of all capacities to GI or GI or rail or RCC pole wall using suitable clamps bolts and nuts and wiring using suitable capacity wires.Using 32mm dia G.I.Pipe complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 4
245 Code245 Fixing halogen metal halide SVL IL LED floodlight fitting over existing pole wall ceiling including clamps bolts nuts and wiring using suitable capacity wires complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 8
246 Code246 Fixing all types and all capacities of fluorescent false ceiling spot light CFL LED fittings indoor on the wall ceiling rafters girders using 23 0.0076 twin twisted PVC insulated wires required Nos of round blocks and clamps.On wall ceiling Rafter Girders complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 98
247 Code247 Fixing a ceiling Wall mounting fan of all capacities and all types to the existing 'S'fthook with fan regulator to the existing board together with supplying andfixing 5A. ceilingrose necessary length of23 0.0076 inch PVC insulated twin twisted copper wire and wiring. complete with all lead and lifts and as per the directions of Engineer in charge of the work Each 31
248 CP 13 ITNO 13.14 ELE SR Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 A. ceiling rose with sufficient length of 23 0.0076 inch PVC insulated twin core wire. complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 16
249 CP 13 ITNO 13.17.1 ELE SR Fixing a shunt capacitor of ... kVAR capacity with necessary clamps bolts and nuts on existing wooden or metal board including banking of more than one capacitor upto 5 kVAR complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 5
250 CP 13 ITNO 13.10 ELE SR Fixing all types and all capacities of 1ftx4ft 2 inch x2ftLED Light fittings indoor on the wall ceiling rafters girders with necessary supporting frame using 2310.0076 inch twin twisted PVC insulated wires required Nos of round blocks and clamps. complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 18
251 Code251 Earth work excavation for pipelines cables by Manual means upto 600 mm trench width as per drawing and technical specifications including setting out shoring strutting barricading caution lights removal of stumps and other deleterious matter including dressing of excavated surfaces disposing off or leveling the excavated earth or sorting and stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches plinth sides of foundations etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour tools usage and other appurtenances required to complete the work. In all kinds of soils. Depth upto 1.50m complete with all lead and lifts and as per the directions of Engineer in charge of the work. M 40
252 BESCOM ITNO 32 SL 224 IT 32.14 Supplying of 95 Sqmm 3.5 Core (21 GI Strips 4 x 0.8 mm) XLPE or Heat resistant PVC insulated PVC exutruted Inner Seath Armoured LTUG Cable as per IS 1554 (Part 1) or IS 7098 Part 1 Armouring strip thickness and resistivity as per IS 3975 complete with all lead and lifts and as per the directions of Engineer in charge of the work. Km 0.05
253 BESCOM ITNO 35 SL 264 IT 35.02 Epoxy Terminating Kit (Pothead) suitable for 1.1 kV LTUG Cable.Up to 3.5 x 70 95 120 Sqmm complete with all lead and lifts and as per the directions of Engineer in charge of the work. Set 2
254 BESCOM ITNO 31 SL 231 IT 31.06 Laying of cable in Existing Trench GI pipe Stone Ware RCC Hume pipe using Wooden Aluminum Rollers as directed by the departmental staff LT cable 35 to 95 Sqmm complete with all lead and lifts and as per the directions of Engineer in charge of the work. Km 0.05
255 Code255 Making and Fixing pot head for LT Cable Heat shrinkable Type Terminations 35 to 95 Sqmm complete with all lead and lifts and as per the directions of Engineer in charge of the work. Set 2
256 CP 5 ITNO 5.17.4 ELE SR Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fining materials and 'C"Type curve indicator ON OFF energy cross 3 with Short droit breaking capacity of 10K and complete wiring as required confirming to IEC 60998 6 32 A DP complete with all lead and lifts and as per the directions of Engineer in charge of the work Each 1
257 Vol 5 SR 202324 PNo 140 ITNo 12.4 Geophysical investigation at site for sinking borewells for Providing drinking water to the habitation either through the Hand Pump MWS or P.W.S.S by vertical electrical sounding by adopting Venner or Schlumbergers's method including reconnaissance survey of geological formation. Geophysical investigation of existing ground water in the vicinity its quality quantity and acceptability of the users indicating the location of the site recommended depth of casing pipe required to seal the top unconsolidated formation including an extra depth of 1.0 metre in consolidated formation for proper seating of casing pipe depth of drilling required to cover full depth of aquifer proposed to be tapped probable yield and other information required including transportation of instruments and ccessories to work site engaging technical personal and labour required NOTE 1)Additional rate on item 1 and 2 is allowed for drilling in over burden and fixing Casing pipes beyond 20 M (for fixing Casing pipes only) a) Above 20 M and upto 30 M15 Percentage b) Above 30 M 30 Percentage (Measurement of overburden is restricted to the depth of casing pipe fixed excluding initial depth of 20M and projection above ground level). 2) A sum of Rs. 100 is to be deducted for Dry Borewell towards yield test complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 1
258 Vol 5 SR 202324 PNo 139 ITNo 12.1.1 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG and above 1100 CMF and above in all strata including over burdern upto 20 m. Fixing of casing pipes collars and cap with necessary cutting threading and welding including ransportation of rig and supporting vehicle crew charges and cost of consumables etc.complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes collars cap etc. complete ) (Above 450m of drilling add 10 Percentage for every 50m depth) Borewell depth of 0 to 50 Mtrscomplete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 50
259 Vol 5 SR 202324 PNo 139 ITNo 12.1.2 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG and above 1100 CMF and above in all strata including over burdern upto 20 m. Fixing of casing pipes collars and cap with necessary cutting threading and welding including ransportation of rig and supporting vehicle crew charges and cost of consumables etc.complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes collars cap etc. complete ) (Above 450m of drilling add 10 Percentage for every 50m depth) Borewell depth of 50 to 100 Mtrs complete with all lead and lifts and as per the directions of Engineer in charge of the work. Rmtr 50
260 Vol 5 SR 202324 PNo 140 ITNo 12.1.3 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG and above 1100 CMF and above in all strata including over burdern upto 20 m. Fixing of casing pipes collars and cap with necessary cutting threading and welding including ransportation of rig and supporting vehicle crew charges and cost of consumables etc.complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes collars cap etc. complete ) (Above 450m of drilling add 10 Percentage for every 50m depth) Borewell depth of 10 to 150 Mtrscomplete with all lead and lifts and as per the directions of Engineer in charge of the work. Rmtr 50
261 Vol 5 SR 202324 PNo 140 ITNo 12.1.4 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG and above 1100 CMF and above in all strata including over burdern upto 20 m. Fixing of casing pipes collars and cap with necessary cutting threading and welding including ransportation of rig and supporting vehicle crew charges and cost of consumables etc.complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes collars cap etc. complete ) (Above 450m of drilling add 10 Percentage for every 50m depth) Borewell depth of 150 to200 Mtrs complete with all lead and lifts and as per the directions of Engineer in charge of the work. Rmtr 25
262 Vol 5 SR 202324 PNo 143 ITNo 12.32 Supply of ISI mark 175mm nominal boreplain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270 2001 and latest ammendments electrical resistance welded steel tubes material and conforming to IS 1387 1993 and manufactured by basic open hearth electric or basic oxygen process in random length of 5 7m both ends.threaded conforming to IS 554 1985 one end fixed with socket conforming to IS 4270 2001 and the other end with screwed pipes all shall be responsibaly free from defects. The tubes shall be responsible straight end should be with ISI marking weighing 25.10kg m.prices include Collar Medium duty. complete with all lead and lifts and as per the directions of Engineer in charge of the work. Rmtr 35
263 Vol 5 202324 PNo 143 ITNo 12.33 Providing and fixing MS casing collars as per IS 1239 (part II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part II) 1982 with all amendments complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 8
264 Vol 5 202324 PNo 143 ITNo 12.34 Providing and laying at site of work MS casing caps as per IS 1239 (part II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part II) 1982 with all amendments including cost of material and labour charges for fixing if any etc. complete with all lead and lifts and as directed by the Ingineering incharge complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 1
265 Vol 5 202324 PNo 152 ITNo 13.15.4 Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034 2000;3Phase SS Bowl and Impeller with Low volt Motor as per specifications to work site as per necessary ammendments and instructions of engineer incharge of work. For 3 HP etc. complete 7.50 HP 155 LPM at 112 m equal 10 STG Outlet Dia 2.00 complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 1
266 Vol 5 202324 PNo 154 ITNo 13.22.3 Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694 1990 with ISI Mark and as per its latest amendments.1x3x4 Sqm complete with all lead and lifts and as per the directions of Engineer in charge of the work. Rmtr 160
267 Vol 5 202324 PNo 154 ITNo 13.25.1 Supply and delivery at site of brand new best make non return valve as per IS 778 1984 with ISI Mark and as per its latest amendments complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 1
268 Vol 5 202324 PNo 155 ITNo 13.24.3 Supply installingtesting and commissioning COMMON control panel consisting of the following INCOMING 1 No set of Phase indicating lamps with SFU of suitable rating 1 No Analog Ammeter 1 No Analog Voltmeter 1ni with Phase selector switch Isolating switch OUTGOING for Main Electrical Pump 1 No. MCB 1 No. DOL of S D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor under voltage over Volage under current over current and dry run protection suitable for the pump described above 1 no Indoor type NOTE 1) DOL Direct Online Starter 2) S D Star Delta Startercomplete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 1
269 Vol 5 202324 PNo 155 ITNo 13.27.1 Supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (C Class) as per IS 1239 (Part I) 1990 with latest amendments with ISI Mark (one end fitted with Heavy Duty collar and other end fitted with protection 50 mm complete with all lead and lifts and as per the directions of Engineer in charge of the work. each 27
270 Vol 5 202324 PNo 156 ITNo 13.32 Labour charges for Erection Electrification and commissioning of Pump sets including aligning and balancing of all items including supply and erection of two pair of supporting clamps bore well caps cable clips and water tight gland cable protectors bolts nuts valve and gaugestools and equipments etc. involved in the job as per specifications with ecessary tests as per specifications with testing of as per instructions of engineer incharge of work Each 1
271 Vol 5 202324 PNo 156 ITNo 13.34 Labour charges for erection of outdoor type panel board and meter board units with all necessary materials and labour tools and equipments including providing cement concrete foundation bed etc. complete as per specification with testing of as per instructions of engineer incharge of work. Each 1
272 Code272 K E B Registration Charges For 7.5 HP Pump and Morter complete with all lead and lifts and as per the directions of Engineer in charge of the work. LS 1
273 Vol 2 202324 PNo 88 ITNo 11.35.2.3 Providing and fixing aluminium work for doors windows ventilators and partitions with extruded built up standard tubular sections appropriate sections and other sections of approved make conforming to IS 733 and IS 1285 fixing with dash fasteners of required dia and size including necessary filling up the gaps at junctions i.e. at top bottom and sides with required EPDM rubber neoprene gasket etc. Aluminium sections shall be smooth rust free straight mitred and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing paneling C.P. brass stainless steel screws all complete as per architectural drawings and the directions of Engineer in charge. (Glazing paneling and dash fasteners to be paid for separately) For shutters of doors windows and ventilators including providing and fixing hinges pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber neoprene gasket required (Fittings shall be paid for separately) Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) including cost of materials labour usage charges of machinery complete as per specifications. complete with all lead and lifts and as per the directions of Engineer in charge of the work. Kg 2498.03
274 Vol 2 202324 PNo 89 ITNo 11.37.3 Providing and fixing glazing in aluminium door window ventilator shutters and partitions etc. with EPDM rubber neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in charge . (Cost of aluminium snap beading shall be paid in basic item) With float glass panes of 8 mm thickness (weight not less than 20 kg m2) including cost of materials labour usage charges of machinery complete as per specifications complete with all lead and lifts and as per the directions of Engineer in charge of the work. Sqm 24.82
275 Vol 2 202324 PNo 89 ITNo 11.36.2 Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS 12823 Grade l Type ll in panelling fixed in aluminum doors windows shutters and partition frames with C.P. brass stainless steel screws etc. complete as per architectural drawings and directions of engineer in charge Pre laminated particle board with decorative lamination on both sides including cost of materials labour usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge. Sqm 49.61
276 Vol 2 202324 PNo 217 ITNo 22.6 Providing and supplying 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand bo xesshelvesracksalmirahcupboard and drawer etc. including necessary nailsscrews etc. complete as per direction of Engineer in charge. Sqm 474.64
277 Vol 2 202324 PNo 218 ITNo 22.96 Providing and fixing stainless steel 304 grade fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer in charge. (150mm length) complete with all lead and lifts and as per the directions of Engineer in charge of the work. No 74
278 Vol 2 202324 PNo 218 ITNo 22.12 Providing and fixing stainless steel 304 grade soft closing hinges with two hole fixing and 165 degrees turning option for Wardrobe Doors Kitchen and other utilities of reputed make with screws etc. complete as per directions of Engineer in charge No 160
279 Vol 2 202324 PNo 218 ITNo 22.11 Providing and fixing Stainless Steel soft closing heavy telescopic drawer channels of approved make 500mm long with screws etc. including making necessary recess in board and finished etc. complete as per direction of Engineer in charge. No 296
280 Vol 2 202324 PNo 218 ITNo 22.14 Providing and fixing 2mm thick 16 to 19mm wide PVC edge binding tape of approved quality for cupboard wardrobe kitchen shutters including necessary synthetic resin hot pressed to edges on binding machine etc. complete as per directions of Engineer in charge. M 289
281 Vol 2 202324 PNo 219 ITNo 22.15.5 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge. SS Tower bolt 150X10mm complete with all lead and lifts and as per the directions of Engineer in charge of the work No 40
282 Vol 2 202324 PNo 105 ITNo 12.65 Providing and fixing magnetic catcher of approved quality in cupboard ward robe shutters including fixing with necessary screwscomplete with all lead and lifts and as per the directions of Engineer in charge of the work No 50
283 Vol 2 202324 PNo 107 ITNo 12.77.1 Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete 40 mm complete with all lead and lifts and as per the directions of Engineer in charge of the work Each 46
284 Vol 2 202324 PNo 17 ITNo 6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg m3 and minimum compressive strength of 4.00 N mm2 conforming to IS 2185 (Part I) 2005 and constructed with CM 1 4 as per IS 2572 2005 including cost of all materials labour scaffolding and curing usage charges of machinery etc complete as per specifications. complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 3.5
285 Vol 2 202324 PNo 41 ITNo 8.1.1 Providing 12 mm cement plaster with cement mortar 1 4 (1 cement 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering providing and removing scaffolding including cost of materials labour curing complete as per specifications and as per directions of Engineer in charge. Sqm 21.2
286 Vol 1 202324 PNo 16 ITNo 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works and super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers well compacted using needle vibrators. The cost includes all lead and lifts cost of all materials quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all other appurtenances required to complete the work as per technical specifications. 2.5.2 M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 1.68
287 Vol 2 202324 PNo 63 ITNo 9.24 Providing and laying Polished Granite stone flooring in required design and patterns in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1 4 (1 cement 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing curing and polishing etc. all complete as specified and as directed by the Engineer in Charge.Polished Granite stone slab Black Cat Eye River Pink or equivalent complete with all lead and lifts and as per the directions of Engineer in charge of the work. Sqm 6.5
288 Vol 2 202324 PNo 46 ITNo 8.33.1 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Two coats applied on walls at 1.25 ltr 10 m2 over and including one coat of Special primer applied at 0.75 ltr 10 m2 with paint of approved quality to give an even shade after thoroughly brooming the surface to remove all dirt dust mortar drops and foreign matter including preparing the surface even and sand paper smooth cost of materials labour complete as per specifications and as per directions of Engineer in charge. Vol 2 46 8.33.1 complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 21.2
289 Vol 2 202324 PNo 219 ITNo 22.19 Providing and fixing Single seater Recliner with cushion of size 3(L)x2.5(W)X2.75(H) ft made of Polyurethane or High performance upholstery fabric with seats fitted with cushion padding springs webbing and as per direction of engineer in charge No 2
290 Vol 2 202324 PNo 219 ITNo 22.20 Providing and fixing of Tea table 900mm x 750mm 450mm with 12mm thick ethched tempered glass with bevelled drawing made out of BWP ply and out faces laminated with 4mm thick veneer or 1mm thick laminate complete with all lead and lifts and as per the directions of Engineer in charge of the work No 1
291 Code291 Original Schmidt N ( PROCEQ) Analog Rebound Hammer Consisting of Test hammer Carrying case Grinding stone Operating instruction complete with all lead and lifts and as per the directions of Engineer in charge of the work No 2
292 Code292 Concrete Pan Mixer Pan Type Capacity 40L complete with all lead and lifts and as per the directions of Engineer in charge of the work No 1
293 Code293 Accelerated Curing Tank for 12 moulds of 150mm size complete with all lead and lifts and as per the directions of Engineer in charge of the work No 1
294 Code294 VicaT Apparatus with ISI Certification Mark IS 5513 fitted in Aluminium Box complete with all lead and lifts and as per the directions of Engineer in charge of the work No 1
295 Code295 Pace Control Digital Compression Testing Machine Capacity 2000kN with NABL calibration certificate complete with all lead and lifts and as per the directions of Engineer in charge of the work No 1
296 Code296 Mould Steel for 70.6mm cube complete with all lead and lifts and as per the directions of Engineer in charge of the work No 12
297 Code297 Standard Sand Grade I complete with all lead and lifts and as per the directions of Engineer in charge of the work Bag 1
298 Code298 Standard Sand Grade II complete with all lead and lifts and as per the directions of Engineer in charge of the work Bag 1
299 Code299 Standard Sand Grade Ill complete with all lead and lifts and as per the directions of Engineer in charge of the work Bag 1
300 Code300 Laboratory Electric Oven with Digital Indicator Cum Controller with Safety Alarm range 50deg to 250 deg C plus 1 deg C with Air Circulating Fan S.S. Inside Size 600 x 600 x 600mm complete with all lead and lifts and as per the directions of Engineer in charge of the work No 1
301 Code301 Vibrating table 50 x 50cm for 4 moulds of 150mm cube complete with all lead and lifts and as per the directions of Engineer in charge of the work No 1
302 Code302 Sieve Shaker Motorised with built in Digital Timer complete with all lead and lifts and as per the directions of Engineer in charge of the work No 1
303 Code303 Domestic Use Micro Oven complete with all lead and lifts and as per the directions of Engineer in charge of the work No 1
304 Code304 Compaction Mould 150mm ID 127.3mm height 2250ml volume complete with Collar and Base Plate made of Mild steel complete with all lead and lifts and as per the directions of Engineer in charge of the work No 2
305 Code305 Rammer 4.9kg x 450mm controlled dropcomplete with all lead and lifts and as per the directions of Engineer in charge of the work No 2
306 Code306 Compaction Mould 100mm ID 127.3mm height 1000ml volume complete with Collar and Base Plate made of Mild Steel complete with all lead and lifts and as per the directions of Engineer in charge of the work No 2
307 Code307 Rammer 2.6kg x 310mm fall as per IS 9198 complete with all lead and lifts and as per the directions of Engineer in charge of the work No 2
308 Code308 Gauging Trowel Ref. Standard IS 4031 100 to 150mm long blade with straight edge. Weight 210plus or minus10g complete with all lead and lifts and as per the directions of Engineer in charge of the work No 2
309 Code309 Gauging Trowel Ref.Standard IS 5515 200mm long blade Weight 210 plus10g complete with all lead and lifts and as per the directions of Engineer in charge of the work No 2
310 Code310 Universal Automatic Compactor with Mild Steel compaction mould as per IS supplied with AIM 11001 MS Compaction Mould 100mm ID 127.3mm height 1000ml volume complete with Collar and Base Plate made of Mild Steel and AIM 11101 MS Compaction Mould 150mm ID 127.3mm height 2250ml volume complete with Collar and Base Plate made of Mild steel complete with all lead and lifts and as per the directions of Engineer in charge of the work No 1
311 Code311 Core Cutter apparatus supplied with 100mm dia Core Cutter Steel Dolly and Rammer – 1 No. each complete with all lead and lifts and as per the directions of Engineer in charge of the work No 5
312 Code312 Tool kit which includes Spanners Cutting player Adjustable Wrenches Steel and Wooden Hammers complete with all lead and lifts and as per the directions of Engineer in charge of the work No 1
313 Code313 Hose complete with all lead and lifts and as per the directions of Engineer in charge of the work No 2
314 Code314 Almirah complete with all lead and lifts and as per the directions of Engineer in charge of the work No 6
315 Code315 Big knife complete with all lead and lifts and as per the directions of Engineer in charge of the work No 2
316 Code316 Engine oil complete with all lead and lifts and as per the directions of Engineer in charge of the work L 1
317 Code317 Cloth waste (10 kg) complete with all lead and lifts and as per the directions of Engineer in charge of the work Kg 1
318 Code318 Tarpaulin 6ft x 6ft complete with all lead and lifts and as per the directions of Engineer in charge of the work No 2
319 Code319 Trovel (big) complete with all lead and lifts and as per the directions of Engineer in charge of the work No 2
320 Code320 Trovel (big) complete with all lead and lifts and as per the directions of Engineer in charge of the work No 2
321 Code321 Grease complete with all lead and lifts and as per the directions of Engineer in charge of the work kg 1
322 Code322 Wheel Barrow complete with all lead and lifts and as per the directions of Engineer in charge of the work No 1
323 Code323 Thermal Resistant Glouse complete with all lead and lifts and as per the directions of Engineer in charge of the work Pair 1
324 Code324 Measurement Tape 5 15 30 and 50MTS complete with all lead and lifts and as per the directions of Engineer in charge of the work No 1
325 Code325 HP Desktop G6 (Intelcore I5 Processor 8gb Dddr 4ram 128gb Solid State Drive 1tb Hard Disk Drive 6usb Ports 10 100 1000 Gigabit Port Multimedia Keyboard Optical Scroll Mouse Window 10 Preloaded 23.8" Hd Ips Hdmi Moniter K7 Mat Total Security With One Year Licence Validity complete with all lead and lifts and as per the directions of Engineer in charge of the work No 4
326 Code326 Canon Image Class Mf465dw Monochrome Duplex Wireless Laser Printer All In One With Scanner Copier Fax Home Or Office Auto Document Feeder complete with all lead and lifts and as per the directions of Engineer in charge of the work No 1
STAR RATES STATEMENT
NAME OF WORK : CONSTRUCTION OF MINOR IRRIGATION AND GEOLOGY OFFICE AT HEBBALA IN MYSORE CITY
Total Duration - 11 Months (Including Monsoon)
Sl. No. Activity Unit Quantity Rate Amount ( in Rs) AS PER DATA RATES
Qty Rate Amount Qty Rate Amount
1 Earth work in surface excavation by mechanical means for lowering and leveling the ground for all works other than foundation in all kinds of soils and upto depth not exceeding 300mm as per drawing and technical specifications including setting out shoring strutting barricading caution lights removal of stumps and other deleterious matter including dressing of excavated surfaces disposing off or levelling the excavated earth or sorting and stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour tools usage of machinery and other appurtenances required complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 336.60 99.75 33575.85 Star rate not applicable
2 Earth work excavation for Foundation by mechanical means for all works and depth upto 3 m as per drawing and technical specifications including setting out shoring strutting barricading caution lights including dressing of excavated surfaces disposing off or levelling the excavated earth or sorting and stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour tools usage of machinery and other appurtenaces required to complete the work In all kinds of soils Depth upto 3 mcomplete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 602.25 107.10 64500.98 Star rate not applicable
3 Earth work excavation for Foundation by mechanical means for all works and depth upto 3 m as per drawing and technical specifications including setting out shoring strutting barricading caution lights including dressing of excavated surfaces disposing off or levelling the excavated earth or sorting and stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour tools usage of machinery and other appurtenaces required to complete the work In ordinary soft rock without blasting Depth exceeding 1.5 m but not exceeding 3 mcomplete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 229.02 446.25 102200.18 Star rate not applicable
4 Providing and injecting chemical emulsion for Pre constructional Anti Termite Treatment creating continuous chemical barrier under and around the column pits walls trenches basement excavation top surface of the plinth filling junction of wall and floor along the external perimeter of building expansion joints over the top surface of consolidated earth on which apron is to be laid surrounding of pipes and conduits with Chlorpyriphos 20 Percentage E.C. Lindane 20 Percentage E.C. at 3.19 l m2 including cost of chemical diluting in water to one percent concentration labour usage charges of machinery complete as per specifications complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 1595.62 123.90 197697.32 Star rate not applicable
5 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed laid in layers not exceeding 150 mm thickness well compacted using plate vibrators including all lead and lifts cost of all materials of quality labour Usage charges of machinery curing and all the other appurtenances required to complete the work as per technical specifications Mix 1 3 6 Using 40 mm nominal size graded crushed coarse aggregates complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 85.97 6213.90 534208.98 (Only star rates for cement and steel given as per the prevailing G.O No : PWD/159 CRM dt: 30-09-2010 )
6 Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1 6 (1 cement 6 coarse sand) complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 58.20 6923.70 402959.34 Star rate not applicable
7 Providing Coursed rubble masonry (second sort) with hard stone in foundation and plinth with Cement mortar 1 6 (1 cement 6 coarse sand) complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 43.66 6490.05 283355.58 Star rate not applicable
8 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer in charge 20 mm to 25 mm wide to required depth complete with all lead and lifts and as per the directions of Engineer in charge of the work M 431.08 69.30 29873.84 Star rate not applicable
9 Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works and super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers well compacted using needle vibrators. The cost includes all lead and lifts cost of all materials quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatescomplete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 171.23 9807.53 1679342.51 (Only star rates for cement and steel given as per the prevailing G.O No : PWD/159 CRM dt: 30-09-2010 )
10 Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works and super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers well compacted using needle vibrators. The cost includes all lead and lifts cost of all materials quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 10.69 12020.19 128495.83 (Only star rates for cement and steel given as per the prevailing G.O No : PWD/159 CRM dt: 30-09-2010 )
11 Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works and super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers well compacted using needle vibrators. The cost includes all lead and lifts cost of all materials quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatescomplete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 21.44 11313.12 242553.29 (Only star rates for cement and steel given as per the prevailing G.O No : PWD/159 CRM dt: 30-09-2010 )
12 Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works and super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers well compacted using needle vibrators. The cost includes all lead and lifts cost of all materials quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatescomplete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 55.75 10606.05 591287.00 (Only star rates for cement and steel given as per the prevailing G.O No : PWD/159 CRM dt: 30-09-2010 )
13 Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works and super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers well compacted using needle vibrators. The cost includes all lead and lifts cost of all materials quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 9.93 9807.53 97369.11 (Only star rates for cement and steel given as per the prevailing G.O No : PWD/159 CRM dt: 30-09-2010 )
14 Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 5.0 conforming to IS 2222 in superstructure above plinth level in cement mortar 1 6 (1 cement 6 coarse sand) With Modular bricks including cost of all materials labour ascaffolding and usage charges of machinery and other incidental charges complete as per the direction of engineer incharge of work. Cum 133.87 12186.30 1631379.98 Star rate not applicable
15 Supplying fitting and placing TMT FE 550 550D Steel Reinforcement including cost of all materials machinery labour cleaning straightening cutting bending hooking laping welding joints tying with binding wire soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.complete with all lead and lifts and as per the directions of Engineer in charge of the work Tonne 14.680 94987.20 1394412.10 (Only star rates for cement and steel given as per the prevailing G.O No : PWD/159 CRM dt: 30-09-2010 )
16 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1 4 (1 cement 4 fine sand) including rounding off corners wherever required smooth rendering providing and removing scaffolding including cost of materials labour curing complete as per specifications complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 406.13 307.65 124945.89 (Only star rates for cement and steel given as per the prevailing G.O No : PWD/159 CRM dt: 30-09-2010 )
17 Providing 12 mm cement plaster with cement mortar 1 4 (1 cement 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering providing and removing scaffolding including cost of materials labour curing complete as per specificationscomplete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 363.74 265.65 96627.53 (Only star rates for cement and steel given as per the prevailing G.O No : PWD/159 CRM dt: 30-09-2010 )
18 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1 5 (1 cement 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1 6 (1 cement 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering providing and removing scaffolding including cost of materials labour curing complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 1025.23 387.45 397225.36 (Only star rates for cement and steel given as per the prevailing G.O No : PWD/159 CRM dt: 30-09-2010 )
19 Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete as per specifications complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 1388.97 105.00 145841.85 Star rate not applicable
20 Providing and laying vitrified floor tiles with thickness 9 10 mm in different sizes with water absorption less than 0.08 Percentage and conforming to IS 15622 of approved make in all colours and shades laid on 20mm thick cement mortar 1 4 (1 cement 4 coarse sand) jointing with grey cement slurry at 3.3 kg m2 including grouting the joints with white cement and matching pigments Size of Tile 600x600 mmcomplete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 280.30 1198.05 335813.42 Star rate not applicable
21 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1 6 20 mm thick and joints finished with cement mortar 1 3 over existing cement concrete bed including cost of materials mortar labour curing complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 64.42 5592.30 360255.97 Star rate not applicable
22 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS 15622 (thickness to be specified by the manufacturer) of approved make in all colours shades except burgundy bottle green black of any size as approved by Engineer in Charge in skirting risers of steps and dados over 12 mm thick bed of cement mortar 1 3 (1 cement 3 coarse sand) and jointing with grey cement slurry at 3.3kg m2 including pointing in white cement mixed with pigment of matching shade complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 46.52 1157.10 53828.29 Star rate not applicable
23 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt dust mortar drops and foreign matter including preparing the surface even and sand paper smooth cost of materials labour complete as per specifications and as per directions of Engineer in charge Sqm 406.13 143.85 58421.80 Star rate not applicable
24 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade New work (Two coats applied at 1.43 ltr 10 m2 over and including priming coat of exterior primer applied at 2.20 kg 10 m2) with paint of approved quality to give an even shade after thoroughly brooming the surface to remove all dirt dust mortar drops and foreign matter including preparing the surface even and sand paper smooth cost of materials labour complete as per specifications and as per directions of Engineer in charge. Sqm 406.13 186.90 75905.70 Star rate not applicable
25 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Two coats applied on walls at 1.25 ltr 10 m2 over and including one coat of Special primer applied at 0.75 ltr 10 m2 with paint of approved quality to give an even shade after thoroughly brooming the surface to remove all dirt dust mortar drops and foreign matter including preparing the surface even and sand paper smooth cost of materials labour complete as per specifications and as per directions of Engineer in charge. Sqm 1388.97 165.90 230430.12 Star rate not applicable
26 Providing Honne wood frames of doors windows clerestory windows ventilators and other frames wrought framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps) but including cost of materials labour usage charges complete as per specifications.complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 1.10 144977.70 159475.47 Star rate not applicable
27 KSRB 9 27.1 Fixing of door frame in an existing opening including embeeding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1 3 6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame making good the damages to walls and floor as required and disposal of the debries with lead upto 50 m. including cost of materials labour charges complete as per specifications.complete with all lead and lifts and as per the directions of Engineer in charge of the work No 16.00 1065.75 17052.00 Star rate not applicable
28 Providing and fixing in position Honne wood half panelled shutters at bottom and half glazed at top for window shutters with stiles and rails of 35mm. thick 75mm wide in two halves with panels of 25mm thick 3mm thick reeded glass for top panels fixed with wooden beading including cost of materials labour charges usage charges complete as per specifications. (excluding cost of fixtures)complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 11.93 7264.95 86670.85 Star rate not applicable
29 Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance plus or minus1mm) with wall thickness 2.0 mm (plus or minus 0.2 mm) corners of the door frame to be Jointed with galvanized brackets and stainless steel screws joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (plus or minus 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer in charge 42x50 mm PVC Extruded sectioncomplete with all lead and lifts and as per the directions of Engineer in charge of the work M 30.00 250.95 7528.50 Star rate not applicable
30 Providing and fixing of Openable door made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) and lead free with gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile through out the openable frame. The frame having overall size of 60mm x 55mm with GI reinforcement of 1mm thickness and openable sash with overall size of 60mm x 102mm and GI reinforcement of 2mm thickness. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 34 mm. Windows shall be provided with 6mm plain float glass Standard hardware with 2D 3D hinge and Multi point locking system with Handle. Wall thickness of frame and sash shall be of 2mm 2.5mm. Maximum possible size – 900mm x 2400mm. (The cost is inclusive of all fixtures and separate charges for minor T and P's shall not be made)complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 9.45 6557.25 61966.01 Star rate not applicable
31 Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete. 125x70x4 mm (ordinary type)complete with all lead and lifts and as per the directions of Engineer in charge of the work Each 48.00 178.50 8568.00 Star rate not applicable
32 Providing and fixing chromium plated brass handles of 100 125 mm with necessary screwscomplete with all lead and lifts and as per the directions of Engineer in charge of the work No 11.00 248.85 2737.35 Star rate not applicable
33 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws complete with all lead and lifts and as per the directions of Engineer in charge of the work No 11.00 1104.60 12150.60 Star rate not applicable
34 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws complete with all lead and lifts and as per the directions of Engineer in charge of the work No 11.00 126.00 1386.00 Star rate not applicable
35 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI IS 3564 embossed on the body door weight upto 35 kg and door width upto 700 mm) with necessary accessories and screws complete with all lead and lifts and as per the directions of Engineer in charge of the work No 11.00 1169.70 12866.70 Star rate not applicable
36 Providing and fixing of 3 track x 2 panel sliding windows made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile through out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass standard hardware and Multi point locking system with touch lock. Wall thickness of frame and sash shall be of 2mm 2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T and P shall not be made)complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 62.78 7070.70 443898.55 Star rate not applicable
37 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes channels plates etc. including welding grinding buffing polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete i c fixing the railing with necessary accessories and stainless steel dash fasteners stainless steel bolts etc. of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer in charge (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts bolts fasteners etc.) including cost of materials labour usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge. Sqm 218.10 593.25 129387.83 Star rate not applicable
38 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace Chajjas Sunken portion of WC Bathroom cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400 Percentage and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats at 1.6 kg m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer at 150 g m2 and protection with 120gsm Geo textile over the waterproofing membrane. The finished cost to include surface preparation making coving at Junction Bore Packing treatment of construction joints completely as per specification.complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 31.89 857.85 27356.84 Star rate not applicable
39 Design supplying erecting testing and commissioning of Passenger Bed cum passenger hospital lift with speed of 1mtr per second variable voltage variable frequency drive with or without machine room for the available well size operating at 415 V 3 phase 50 cycles AC supply powder coated Stainless Steel car entrance doors enclosures with suitable colour vinyl flooring LED car illumination emergency light intercom and fan as desired by the user central opening side opening door with or without attendant operation 7 segment display buttons call register indicator fireman drive SS handrails inside car full length infrared curtain in car door automatic rescue device with batteries voice announcing in regional international languages Braille buttons with one year warranty and maintenance with necessary scaffolding and minor civil works like fixing of guide rail counter weight etc.The total product and services shall adhere to IS 14665 2016 ( with latest amendments) part section 1 to 5 with regards to general guidelines of fire safety rated doors MRLL beams pressure switch manual change over for doors during emergency ARD of 10 times with sufficient battery back up and standard dimensions of chair car and door openings for all sizes and capacities of lifts including fitness certificate and duly observing all other safety norms prescribed and adhere to CPWD specifications PCB Norms National Electricity Code (NEC) NBC 2016 IEC and Karnataka State Lifts Escalators and Passengers Conveyers Act 2012 and Rules 2014. The Supplier shall be registered in Government Electrical Inspectorate in the State of Karnataka. B.With Machine Room SS Finishcomplete with all lead and lifts and as per the directions of Engineer in charge of the work Job 1.00 1604115.45 1604115.45 Star rate not applicable
40 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings wooden frames with rawl plugs screws complete with all lead and lifts and as per the directions of Engineer in charge of the work Kg 627.80 197.91 124250.72 Star rate not applicable
41 Providing and fixing Steel work in built up tubular (round square or rectangular hollow tubes etc.) trusses etc. including cutting hoisting fixing in position and applying a priming coat of approved steel primer including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials labour usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge Kg 1764.54 158.98 280527.45 Star rate not applicable
42 Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works and super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers well compacted using needle vibrators. The cost includes all lead and lifts cost of all materials quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatescomplete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 11.19 12140.39 135851.01 (Only star rates for cement and steel given as per the prevailing G.O No : PWD/159 CRM dt: 30-09-2010 )
43 Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works and super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers well compacted using needle vibrators. The cost includes all lead and lifts cost of all materials quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatescomplete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 22.02 11426.25 251605.96 (Only star rates for cement and steel given as per the prevailing G.O No : PWD/159 CRM dt: 30-09-2010 )
44 Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works and super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers well compacted using needle vibrators. The cost includes all lead and lifts cost of all materials quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatescomplete with all lead and lifts and as per the directions of Engineer in charge of the work. Cum 3.59 10712.11 38456.48 (Only star rates for cement and steel given as per the prevailing G.O No : PWD/159 CRM dt: 30-09-2010 )
45 Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works and super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers well compacted using needle vibrators. The cost includes all lead and lifts cost of all materials quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatescomplete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 53.65 10712.11 574704.73 (Only star rates for cement and steel given as per the prevailing G.O No : PWD/159 CRM dt: 30-09-2010 )
46 Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 5.0 conforming to IS 2222 in superstructure above plinth level in cement mortar 1 6 (1 cement 6 coarse sand) With Modular bricks including cost of all materials labour ascaffolding and usage charges of machinery and other incidental charges complete as per the direction of engineer incharge of work. Cum 123.23 12308.16 1516734.93 Star rate not applicable
47 Supplying fitting and placing TMT FE 550 550D Steel Reinforcement including cost of all materials machinery labour cleaning straightening cutting bending hooking laping welding joints tying with binding wire soft annealed steel wire and other ancilary operations complete with all lead and lifts and as per the directions of Engineer in charge of the work Tonne 9.476 95937.07 909099.69 (Only star rates for cement and steel given as per the prevailing G.O No : PWD/159 CRM dt: 30-09-2010 )
48 Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works and super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers well compacted using needle vibrators. The cost includes all lead and lifts cost of all materials quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatescomplete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 2.93 10355.04 30340.26 (Only star rates for cement and steel given as per the prevailing G.O No : PWD/159 CRM dt: 30-09-2010 )
49 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1 4 (1 cement 4 fine sand) including rounding off corners wherever required smooth rendering providing and removing scaffolding including cost of materials labour curing complete as per specifications and as per directions of Engineer in charge. Sqm 365.18 310.73 113471.10 (Only star rates for cement and steel given as per the prevailing G.O No : PWD/159 CRM dt: 30-09-2010 )
50 Providing 12 mm cement plaster with cement mortar 1 4 (1 cement 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering providing and removing scaffolding including cost of materials labour curing complete as per specifications and as per directions of Engineer in charge Sqm 373.40 268.31 100185.65 (Only star rates for cement and steel given as per the prevailing G.O No : PWD/159 CRM dt: 30-09-2010 )
51 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1 5 (1 cement 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1 6 (1 cement 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering providing and removing scaffolding including cost of materials labour curing complete as per specifications and as per directions of Engineer in charge. Sqm 1053.93 391.32 412428.63 (Only star rates for cement and steel given as per the prevailing G.O No : PWD/159 CRM dt: 30-09-2010 )
52 Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Sqm 1427.33 106.05 151368.35 Star rate not applicable
53 Providing and laying vitrified floor tiles with thickness 9 10 mm in different sizes with water absorption less than 0.08 Percentage and conforming to IS 15622 of approved make in all colours and shades laid on 20mm thick cement mortar 1 4 (1 cement 4 coarse sand) jointing with grey cement slurry at 3.3 kg m2 including grouting the joints with white cement and matching pigments Size of Tile 600x600 mmcomplete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 273.36 1210.03 330773.94 Star rate not applicable
54 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1 6 20 mm thick and joints finished with cement mortar 1 3 over existing cement concrete bed including cost of materials mortar labour curing complete as per specifications.complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 64.43 5648.22 363915.01 Star rate not applicable
55 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS 15622 (thickness to be specified by the manufacturer) of approved make in all colours shades except burgundy bottle green black of any size as approved by Engineer in Charge in skirting risers of steps and dados over 12 mm thick bed of cement mortar 1 3 (1 cement 3 coarse sand) and jointing with grey cement slurry at 3.3kg m2 including pointing in white cement mixed with pigment of matching shade complete.complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 46.52 1168.67 54366.57 Star rate not applicable
56 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt dust mortar drops and foreign matter including preparing the surface even and sand paper smooth cost of materials labour complete as per specifications and as per directions of Engineer in charge. Sqm 365.17 145.29 53055.00 Star rate not applicable
57 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade New work (Two coats applied at 1.43 ltr 10 m2 over and including priming coat of exterior primer applied at 2.20 kg 10 m2) with paint of approved quality to give an even shade after thoroughly brooming the surface to remove all dirt dust mortar drops and foreign matter including preparing the surface even and sand paper smooth cost of materials labour complete as per specifications and as per directions of Engineer in charge. Sqm 365.18 188.77 68934.66 Star rate not applicable
58 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Two coats applied on walls at 1.25 ltr 10 m2 over and including one coat of Special primer applied at 0.75 ltr 10 m2 with paint of approved quality to give an even shade after thoroughly brooming the surface to remove all dirt dust mortar drops and foreign matter including preparing the surface even and sand paper smooth cost of materials labour complete as per specifications and as per directions of Engineer in charge. Sqm 1427.33 167.56 239161.99 Star rate not applicable
59 Providing Honne wood frames of doors windows clerestory windows ventilators and other frames wrought framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps) but including cost of materials labour usage charges complete as per specificationscomplete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 0.08 146427.48 12153.48 Star rate not applicable
60 Providing Honne wood frames of doors windows clerestory windows ventilators and other frames wrought framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps) but including cost of materials labour usage charges complete as per specifications.complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 0.89 146427.48 130174.03 Star rate not applicable
61 KSRB 9 27.1 Fixing of door frame in an existing opening including embeeding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1 3 6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame making good the damages to walls and floor as required and disposal of the debries with lead upto 50 m. including cost of materials labour charges complete as per specifications.complete with all lead and lifts and as per the directions of Engineer in charge of the work No 13.00 1076.41 13993.30 Star rate not applicable
62 Providing and fixing in position Honne wood half panelled shutters at bottom and half glazed at top for window shutters with stiles and rails of 35mm. thick 75mm wide in two halves with panels of 25mm thick 3mm thick reeded glass for top panels fixed with wooden beading including cost of materials labour charges usage charges complete as per specifications. (excluding cost of fixtures) complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 2.73 7337.60 20031.65 Star rate not applicable
63 Providing and fixing in position Honne wood half panelled shutters at bottom and half glazed at top for window shutters with stiles and rails of 35mm. thick 75mm wide in two halves with panels of 25mm thick 3mm thick reeded glass for top panels fixed with wooden beading including cost of materials labour charges usage charges complete as per specifications. (excluding cost of fixtures)complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 7.10 7337.60 52096.96 Star rate not applicable
64 Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance 1mm) with wall thickness 2.0 mm (plus or minus 0.2 mm) corners of the door frame to be Jointed with galvanized brackets and stainless steel screws joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (plus or minus 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer in charge 42x50 mm PVC Extruded section complete with all lead and lifts and as per the directions of Engineer in charge of the work M 24.00 253.46 6083.03 Star rate not applicable
65 Providing and fixing of Openable door made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) and lead free with gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile through out the openable frame. The frame having overall size of 60mm x 55mm with GI reinforcement of 1mm thickness and openable sash with overall size of 60mm x 102mm and GI reinforcement of 2mm thickness. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 34 mm. Windows shall be provided with 6mm plain float glass Standard hardware with 2D 3D hinge and Multi point locking system with Handle. Wall thickness of frame and sash shall be of 2mm 2.5mm. Maximum possible size – 900mm x 2400mm. (The cost is inclusive of all fixtures and separate charges for minor T and P's shall not be made)complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 5.67 6622.82 37551.40 Star rate not applicable
66 Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete. 125x70x4 mm (ordinary type) complete with all lead and lifts and as per the directions of Engineer in charge of the work Each 51.00 180.29 9194.54 Star rate not applicable
67 Providing and fixing chromium plated brass handles of 100 125 mm with necessary screws complete with all lead and lifts and as per the directions of Engineer in charge of the work No 16.00 251.34 4021.42 Star rate not applicable
68 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws complete with all lead and lifts and as per the directions of Engineer in charge of the work No 16.00 1115.65 17850.34 Star rate not applicable
69 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws complete with all lead and lifts and as per the directions of Engineer in charge of the work No 16.00 127.26 2036.16 Star rate not applicable
70 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI IS 3564 embossed on the body door weight upto 35 kg and door width upto 700 mm) with necessary accessories and screws complete with all lead and lifts and as per the directions of Engineer in charge of the work No 16.00 1181.40 18902.35 Star rate not applicable
71 Providing and fixing of 3 track x 2 panel sliding windows made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile through out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass standard hardware and Multi point locking system with touch lock. Wall thickness of frame and sash shall be of 2mm 2.5mm. Maximum possible size – 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T and P's shall not be made) complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 60.00 7141.41 428484.42 Star rate not applicable
72 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings wooden frames with rawl plugs screws complete with all lead and lifts and as per the directions of Engineer in charge of the work Kg 600.00 194.07 116442.90 Star rate not applicable
73 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes channels plates etc. including welding grinding buffing polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete i c fixing the railing with necessary accessories and stainless steel dash fasteners stainless steel bolts etc. of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer in charge (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts bolts fasteners etc.) including cost of materials labour usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge. Kg 262.50 599.18 157285.41 Star rate not applicable
74 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace Chajjas Sunken portion of WC Bathroom cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400 Percentage and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats at 1.6 kg m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer at 150 g m2 and protection with 120gsm Geo textile over the waterproofing membrane. The finished cost to include surface preparation making coving at Junction Bore Packing treatment of construction joints completely as per specification.complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 31.89 866.43 27630.40 Star rate not applicable
75 Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works and super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers well compacted using needle vibrators. The cost includes all lead and lifts cost of all materials quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 11.19 12260.60 137196.09 (Only star rates for cement and steel given as per the prevailing G.O No : PWD/159 CRM dt: 30-09-2010 )
76 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 22.02 11539.38 254097.25 (Only star rates for cement and steel given as per the prevailing G.O No : PWD/159 CRM dt: 30-09-2010 )
77 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates including cost of materials labour usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge. Cum 3.59 10818.17 38837.23 (Only star rates for cement and steel given as per the prevailing G.O No : PWD/159 CRM dt: 30-09-2010 )
78 Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works and super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers well compacted using needle vibrators. The cost includes all lead and lifts cost of all materials quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 53.66 10818.17 580503.06 (Only star rates for cement and steel given as per the prevailing G.O No : PWD/159 CRM dt: 30-09-2010 )
79 Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 5.0 conforming to IS 2222 in superstructure above plinth level in cement mortar 1 6 (1 cement 6 coarse sand) With Modular bricks including cost of all materials labour ascaffolding and usage charges of machinery and other incidental charges complete as per the direction of engineer incharge of work. Cum 123.24 12430.03 1531876.40 Star rate not applicable
80 Supplying fitting and placing TMT FE 550 550D Steel Reinforcement including cost of all materials machinery labour cleaning straightening cutting bending hooking laping welding joints tying with binding wire soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.complete with all lead and lifts and as per the directions of Engineer in charge of the work Tonne 9.476 96886.94 918100.64 (Only star rates for cement and steel given as per the prevailing G.O No : PWD/159 CRM dt: 30-09-2010 )
81 Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works and super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers well compacted using needle vibrators. The cost includes all lead and lifts cost of all materials quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 2.93 10457.56 30640.65 (Only star rates for cement and steel given as per the prevailing G.O No : PWD/159 CRM dt: 30-09-2010 )
82 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1 4 (1 cement 4 fine sand) including rounding off corners wherever required smooth rendering providing and removing scaffolding including cost of materials labour curing complete as per specifications and as per directions of Engineer in charge. Sqm 365.18 313.80 114593.48 (Only star rates for cement and steel given as per the prevailing G.O No : PWD/159 CRM dt: 30-09-2010 )
83 Providing 12 mm cement plaster with cement mortar 1 4 (1 cement 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering providing and removing scaffolding including cost of materials labour curing complete as per specifications and as per directions of Engineer in charge Sqm 373.40 270.96 101176.46 (Only star rates for cement and steel given as per the prevailing G.O No : PWD/159 CRM dt: 30-09-2010 )
84 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1 5 (1 cement 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1 6 (1 cement 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering providing and removing scaffolding including cost of materials labour curing complete as per specifications and as per directions of Engineer in charge Sqm 1053.93 395.19 416502.60 (Only star rates for cement and steel given as per the prevailing G.O No : PWD/159 CRM dt: 30-09-2010 )
85 Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Sqm 1427.33 107.10 152867.04 Star rate not applicable
86 Providing and laying vitrified floor tiles with thickness 9 10 mm in different sizes with water absorption less than 0.08 Percentage and conforming to IS 15622 of approved make in all colours and shades laid on 20mm thick cement mortar 1 4 (1 cement 4 coarse sand) jointing with grey cement slurry at 3.3 kg m2 including grouting the joints with white cement and matching pigments Size of Tile 600x600 mmcomplete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 273.36 1222.01 334048.65 Star rate not applicable
87 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1 6 20 mm thick and joints finished with cement mortar 1 3 over existing cement concrete bed including cost of materials mortar labour curing complete as per specifications.complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 64.42 5704.14 367460.70 Star rate not applicable
88 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS 15622 (thickness to be specified by the manufacturer) of approved make in all colours shades except burgundy bottle green black of any size as approved by Engineer in Charge in skirting risers of steps and dados over 12 mm thick bed of cement mortar 1 3 (1 cement 3 coarse sand) and jointing with grey cement slurry at 3.3kg m2 including pointing in white cement mixed with pigment of matching shadecomplete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 127.58 1180.24 150575.02 Star rate not applicable
89 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt dust mortar drops and foreign matter including preparing the surface even and sand paper smooth cost of materials labour complete as per specifications and as per directions of Engineer in charge. Sqm 365.18 146.72 53579.21 Star rate not applicable
90 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade New work (Two coats applied at 1.43 ltr 10 m2 over and including priming coat of exterior primer applied at 2.20 kg 10 m2) with paint of approved quality to give an even shade after thoroughly brooming the surface to remove all dirt dust mortar drops and foreign matter including preparing the surface even and sand paper smooth cost of materials labour complete as per specifications and as per directions of Engineer in charge. Sqm 365.18 190.64 69617.92 Star rate not applicable
91 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Two coats applied on walls at 1.25 ltr 10 m2 over and including one coat of Special primer applied at 0.75 ltr 10 m2 with paint of approved quality to give an even shade after thoroughly brooming the surface to remove all dirt dust mortar drops and foreign matter including preparing the surface even and sand paper smooth cost of materials labour complete as per specifications and as per directions of Engineer in charge. Sqm 1427.33 169.23 241547.06 Star rate not applicable
92 Providing Honne wood frames of doors windows clerestory windows ventilators and other frames wrought framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps) but including cost of materials labour usage charges complete as per specifications.complete with all lead and lifts and as per the directions of Engineer in charge of the work. Cum 0.08 147877.25 12273.81 Star rate not applicable
93 Providing Honne wood frames of doors windows clerestory windows ventilators and other frames wrought framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps) but including cost of materials labour usage charges complete as per specifications.complete with all lead and lifts and as per the directions of Engineer in charge of the work. Cum 0.89 147877.25 131462.88 Star rate not applicable
94 KSRB 9 27.1 Fixing of door frame in an existing opening including embeeding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1 3 6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame making good the damages to walls and floor as required and disposal of the debries with lead upto 50 m. including cost of materials labour charges complete as per specifications.complete with all lead and lifts and as per the directions of Engineer in charge of the work No 13.00 1087.07 14131.91 Star rate not applicable
95 Providing and fixing in position Honne wood half panelled shutters at bottom and half glazed at top for window shutters with stiles and rails of 35mm. thick 75mm wide in two halves with panels of 25mm thick 3mm thick reeded glass for top panels fixed with wooden beading including cost of materials labour charges usage charges complete as per specifications. (excluding cost of fixtures)complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 2.73 7410.25 20229.98 Star rate not applicable
96 Providing and fixing in position Honne wood half panelled shutters at bottom and half glazed at top for window shutters with stiles and rails of 35mm. thick 75mm wide in two halves with panels of 25mm thick 3mm thick reeded glass for top panels fixed with wooden beading including cost of materials labour charges usage charges complete as per specifications. (excluding cost of fixtures)complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 7.10 7410.25 52612.78 Star rate not applicable
97 Providing and fixing factory made UPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance plus or minus1mm) with wall thickness 2.0 mm (plus or minus 0.2 mm) corners of the door frame to be Jointed with galvanized brackets and stainless steel screws joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (plus or minus 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer in charge 42x50 mm PVC Extruded sectioncomplete with all lead and lifts and as per the directions of Engineer in charge of the work M 24.00 255.97 6143.28 Star rate not applicable
98 Providing and fixing of Openable door made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) and lead free with gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile through out the openable frame. The frame having overall size of 60mm x 55mm with GI reinforcement of 1mm thickness and openable sash with overall size of 60mm x 102mm and GI reinforcement of 2mm thickness. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 34 mm. Windows shall be provided with 6mm plain float glass Standard hardware with 2D 3D hinge and Multi point locking system with Handle. Wall thickness of frame and sash shall be of 2mm 2.5mm. Maximum possible size – 900mm x 2400mm. (The cost is inclusive of all fixtures and separate charges for minor T and P's shall not be made)complete with all lead and lifts and as per the directions of Engineer in charge of the work. Sqm 5.67 6688.40 37923.23 Star rate not applicable
99 Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete. 125x70x4 mm (ordinary type) complete with all lead and lifts and as per the directions of Engineer in charge of the work Each 51.00 182.07 9285.57 Star rate not applicable
100 Providing and fixing chromium plated brass handles of 100 125 mm with necessary screws complete with all lead and lifts and as per the directions of Engineer in charge of the work. No 16.00 253.83 4061.28 Star rate not applicable
101 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws complete with all lead and lifts and as per the directions of Engineer in charge of the work. No 16.00 1126.69 18027.04 Star rate not applicable
102 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws complete with all lead and lifts and as per the directions of Engineer in charge of the work No 16.00 128.52 2056.32 Star rate not applicable
103 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI IS 3564 embossed on the body door weight upto 35 kg and door width upto 700 mm) with necessary accessories and screws complete with all lead and lifts and as per the directions of Engineer in charge of the work. No 16.00 1193.09 19089.50 Star rate not applicable
104 Providing and fixing of 3 track x 2 panel sliding windows made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile through out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass standard hardware and Multi point locking system with touch lock. Wall thickness of frame and sash shall be of 2mm 2.5mm. Maximum possible size – 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T and P's shall not be made)complete with all lead and lifts and as per the directions of Engineer in charge of the work. Sqm 60.00 7212.12 432727.20 Star rate not applicable
105 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings wooden frames with rawl plugs screws complete with all lead and lifts and as per the directions of Engineer in charge of the work. Kg 600.00 195.99 117594.00 Star rate not applicable
106 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes channels plates etc. including welding grinding buffing polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete i c fixing the railing with necessary accessories and stainless steel dash fasteners stainless steel bolts etc. of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer in charge (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts bolts fasteners etc.) including cost of materials labour usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge Kg 262.50 605.12 158844.00 Star rate not applicable
107 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace Chajjas Sunken portion of WC Bathroom cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400 Percentage and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats at 1.6 kg m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer at 150 g m2 and protection with 120gsm Geo textile over the waterproofing membrane. The finished cost to include surface preparation making coving at Junction Bore Packing treatment of construction joints completely as per specification.complete with all lead and lifts and as per the directions of Engineer in charge of the work. Sqm 31.89 875.01 27903.97 Star rate not applicable
108 Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works and super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers well compacted using needle vibrators. The cost includes all lead and lifts cost of all materials quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatescomplete with all lead and lifts and as per the directions of Engineer in charge of the work. Cum 4.93 12380.79 61037.29 (Only star rates for cement and steel given as per the prevailing G.O No : PWD/159 CRM dt: 30-09-2010 )
109 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 0.59 11652.51 6874.98 (Only star rates for cement and steel given as per the prevailing G.O No : PWD/159 CRM dt: 30-09-2010 )
110 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates including cost of materials labour usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge Cum 3.59 10924.23 39217.99 (Only star rates for cement and steel given as per the prevailing G.O No : PWD/159 CRM dt: 30-09-2010 )
111 Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works and super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers well compacted using needle vibrators. The cost includes all lead and lifts cost of all materials quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatescomplete with all lead and lifts and as per the directions of Engineer in charge of the work. Cum 4.03 10924.23 44024.65 (Only star rates for cement and steel given as per the prevailing G.O No : PWD/159 CRM dt: 30-09-2010 )
112 Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 5.0 conforming to IS 2222 in superstructure above plinth level in cement mortar 1 6 (1 cement 6 coarse sand) With Modular bricks including cost of all materials labour ascaffolding and usage charges of machinery and other incidental charges complete as per the direction of engineer incharge of work. Cum 33.99 12551.88 426638.40 Star rate not applicable
113 Supplying fitting and placing TMT FE 550 550D Steel Reinforcement including cost of all materials machinery labour cleaning straightening cutting bending hooking laping welding joints tying with binding wire soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.complete with all lead and lifts and as per the directions of Engineer in charge of the work. Tonne 2.700 97836.81 264159.39 (Only star rates for cement and steel given as per the prevailing G.O No : PWD/159 CRM dt: 30-09-2010 )
114 Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works and super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers well compacted using needle vibrators. The cost includes all lead and lifts cost of all materials quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatescomplete with all lead and lifts and as per the directions of Engineer in charge of the work. Cum 0.18 10560.09 1900.82 (Only star rates for cement and steel given as per the prevailing G.O No : PWD/159 CRM dt: 30-09-2010 )
115 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1 4 (1 cement 4 fine sand) including rounding off corners wherever required smooth rendering providing and removing scaffolding including cost of materials labour curing complete as per specifications and as per directions of Engineer in charge. Sqm 123.19 316.88 39036.45 (Only star rates for cement and steel given as per the prevailing G.O No : PWD/159 CRM dt: 30-09-2010 )
116 Providing 12 mm cement plaster with cement mortar 1 4 (1 cement 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering providing and removing scaffolding including cost of materials labour curing complete as per specifications and as per directions of Engineer in charge Sqm 42.59 273.62 11653.43 (Only star rates for cement and steel given as per the prevailing G.O No : PWD/159 CRM dt: 30-09-2010 )
117 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1 5 (1 cement 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1 6 (1 cement 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering providing and removing scaffolding including cost of materials labour curing complete as per specifications and as per directions of Engineer in charge. Sqm 261.43 399.07 104329.65 (Only star rates for cement and steel given as per the prevailing G.O No : PWD/159 CRM dt: 30-09-2010 )
118 Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Sqm 304.02 108.15 32879.76 Star rate not applicable
119 Providing and laying vitrified floor tiles with thickness 9 10 mm in different sizes with water absorption less than 0.08 Percentage and conforming to IS 15622 of approved make in all colours and shades laid on 20mm thick cement mortar 1 4 (1 cement 4 coarse sand) jointing with grey cement slurry at 3.3 kg m2 including grouting the joints with white cement and matching pigments Size of Tile 600x600 mmcomplete with all lead and lifts and as per the directions of Engineer in charge of the work. Sqm 11.45 1233.99 14129.19 Star rate not applicable
120 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1 6 20 mm thick and joints finished with cement mortar 1 3 over existing cement concrete bed including cost of materials mortar labour curing complete as per specifications.complete with all lead and lifts and as per the directions of Engineer in charge of the work. Sqm 22.88 5760.07 131790.38 Star rate not applicable
121 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt dust mortar drops and foreign matter including preparing the surface even and sand paper smooth cost of materials labour complete as per specifications and as per directions of Engineer in charge Sqm 123.19 148.17 18253.06 Star rate not applicable
122 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade New work (Two coats applied at 1.43 ltr 10 m2 over and including priming coat of exterior primer applied at 2.20 kg 10 m2) with paint of approved quality to give an even shade after thoroughly brooming the surface to remove all dirt dust mortar drops and foreign matter including preparing the surface even and sand paper smooth cost of materials labour complete as per specifications and as per directions of Engineer in charge. Sqm 123.19 192.51 23714.94 Star rate not applicable
123 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Two coats applied on walls at 1.25 ltr 10 m2 over and including one coat of Special primer applied at 0.75 ltr 10 m2 with paint of approved quality to give an even shade after thoroughly brooming the surface to remove all dirt dust mortar drops and foreign matter including preparing the surface even and sand paper smooth cost of materials labour complete as per specifications and as per directions of Engineer in charge. Sqm 304.02 170.88 51950.03 Star rate not applicable
124 Providing Honne wood frames of doors windows clerestory windows ventilators and other frames wrought framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps) but including cost of materials labour usage charges complete as per specifications.complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 0.129 149327.03 19263.19 Star rate not applicable
125 KSRB 9 27.1 Fixing of door frame in an existing opening including embeeding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1 3 6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame making good the damages to walls and floor as required and disposal of the debries with lead upto 50 m. including cost of materials labour charges complete as per specifications.complete with all lead and lifts and as per the directions of Engineer in charge of the work. No 2.00 1097.72 2195.44 Star rate not applicable
126 Providing and fixing in position Honne wood half panelled shutters at bottom and half glazed at top for window shutters with stiles and rails of 35mm. thick 75mm wide in two halves with panels of 25mm thick 3mm thick reeded glass for top panels fixed with wooden beading including cost of materials labour charges usage charges complete as per specifications. (excluding cost of fixtures)complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 1.03 7482.89 7707.38 Star rate not applicable
127 Providing and fixing factory made UPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance plus or minus1mm) with wall thickness 2.0 mm (plus or minus 0.2 mm) corners of the door frame to be Jointed with galvanized brackets and stainless steel screws joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (plus or minus 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer in charge 42x50 mm PVC Extruded sectioncomplete with all lead and lifts and as per the directions of Engineer in charge of the work. M 12.00 258.48 3101.76 Star rate not applicable
128 Providing and fixing of Openable door made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) and lead free with gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile through out the openable frame. The frame having overall size of 60mm x 55mm with GI reinforcement of 1mm thickness and openable sash with overall size of 60mm x 102mm and GI reinforcement of 2mm thickness. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 34 mm. Windows shall be provided with 6mm plain float glass Standard hardware with 2D 3D hinge and Multi point locking system with Handle. Wall thickness of frame and sash shall be of 2mm 2.5mm. Maximum possible size – 900mm x 2400mm. (The cost is inclusive of all fixtures and separate charges for minor T and P's shall not be made)complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 3.78 6753.96 25529.97 Star rate not applicable
129 Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete. 125x70x4 mm (ordinary type)complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 4.00 183.85 735.40 Star rate not applicable
130 Providing and fixing chromium plated brass handles of 100 125 mm with necessary screws complete with all lead and lifts and as per the directions of Engineer in charge of the work. No 2.00 256.31 512.62 Star rate not applicable
131 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws complete with all lead and lifts and as per the directions of Engineer in charge of the work. No 2.00 1137.73 2275.46 Star rate not applicable
132 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws complete with all lead and lifts and as per the directions of Engineer in charge of the work No 2.00 129.78 259.56 Star rate not applicable
133 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI IS 3564 embossed on the body door weight upto 35 kg and door width upto 700 mm) with necessary accessories and screws complete with all lead and lifts and as per the directions of Engineer in charge of the work. No 2.00 1204.79 2409.58 Star rate not applicable
134 Providing and fixing of 3 track x 2 panel sliding windows made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile through out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass standard hardware and Multi point locking system with touch lock. Wall thickness of frame and sash shall be of 2mm 2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T and P's shall not be made) complete with all lead and lifts and as per the directions of Engineer in charge of the work. Sqm 2.40 7282.82 17478.77 Star rate not applicable
135 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings wooden frames with rawl plugs screws complete with all lead and lifts and as per the directions of Engineer in charge of the work. Sqm 24.00 197.91 4749.84 Star rate not applicable
136 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes channels plates etc. including welding grinding buffing polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete i c fixing the railing with necessary accessories and stainless steel dash fasteners stainless steel bolts etc. of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer in charge (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts bolts fasteners etc.) including cost of materials labour usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge. Sqm 262.50 611.05 160400.63 Star rate not applicable
137 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace Chajjas Sunken portion of WC Bathroom cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400 Percentage and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats at 1.6 kg m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer at 150 g m2 and protection with 120gsm Geo textile over the waterproofing membrane. The finished cost to include surface preparation making coving at Junction Bore Packing treatment of construction joints completely as per specification.complete with all lead and lifts and as per the directions of Engineer in charge of the work. Sqm 348.01 883.58 307494.68 Star rate not applicable
138 Providing and fixing Steel work in built up tubular (round square or rectangular hollow tubes etc.) trusses etc. including cutting hoisting fixing in position and applying a priming coat of approved steel primer including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials labour usage charges of machinery complete with all lead and lifts and as per the directions of Engineer in charge of the work. Kg 7812.64 158.98 1242053.51 Star rate not applicable
139 Providing and fixing corrugated G.S. sheet roofing including vertical curved surface fixed with polymer coated J or L hooks bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete as per design drawings (up to any pitch in horizontal vertical or curved surfaces) excluding the cost of purlins rafters and trusses and including cutting to size and shape wherever required as per the direction of Engineer in charge. 1.60 mm thick with zinc coating not less than 350 g m2complete with all lead and lifts and as per the directions of Engineer in charge of the work. Sqm 390.63 2231.14 871550.22 Star rate not applicable
140 Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works and super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers well compacted using needle vibrators. The cost includes all lead and lifts cost of all materials quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatescomplete with all lead and lifts and as per the directions of Engineer in charge of the work. Cum 3.05 10442.25 31848.86 Star rate not applicable
141 Providing and fixing Steel work in built up tubular (round square or rectangular hollow tubes etc.) trusses etc. including cutting hoisting fixing in position and applying a priming coat of approved steel primer including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials labour usage charges of machinerycomplete with all lead and lifts and as per the directions of Engineer in charge of the work. Sqm 9161.60 154.35 1414092.96 Star rate not applicable
142 Providingfabricating and fixing Profiled Poly Urethane insulated Roof(PUFSheet) having modular density 40kg m2 and size 1.06m width and 7.60m length sheets roof having external sheet of 0.5mm steel bottom sheet of 0.40mm steel with powder coated finish. The precoated sheet shall be of minimum 240MPa steel conforming to IS 14246 1995 and shal have zinc coating with minimum 120gsm as per IS 277 1992.The roofing system shall have suitable water proof over lapping arrangments and GRIHA ceritifed.The fasting shall be of self tapping screws of required length with PVC head along with washer pre painted aluminium cap unit with build in seal arrangments. The entire roof shall be firmly fastened to the existng frame including all lead and lifts loading and unloading usage charges of machinery and equipments transportation chargeslabour charges and all other incidental charges etc.complete as per standard technical detailed specifications and as directed by the Engineer in charge of the work. 1.60 mm thick with zinc coating not less than 350 g m2 50mm thicknesscomplete with all lead and lifts and as per the directions of Engineer in charge of the work. Sqm 322.00 2724.75 877369.50 Star rate not applicable
143 Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway Sidewalls and gutters fixed with CM 1 3 fixed and finsihed in line as per direction of Engineer in charge. (The cost of PCC shall be paid extra) 300 x 300 x 150 mm sizecomplete with all lead and lifts and as per the directions of Engineer in charge of the work. M 163.00 394.80 64352.40 Star rate not applicable
144 Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M 30 grade made of C and D waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand filling the joints with fine sand etc. all complete as per the direction of Engineer in charge. Sqm 609.33 840.00 511837.20 Star rate not applicable
145 Providing and fixing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete as per design drawings.0.63 mm thick with zinc coating not less than 275 g m2complete with all lead and lifts and as per the directions of Engineer in charge of the work M 23.00 670.95 15431.85 Star rate not applicable
146 Earth work excavation for pipelines cables by Manual means upto 600 mm trench width as per drawing and technical specifications including setting out shoring strutting barricading caution lights removal of stumps and other deleterious matter including dressing of excavated surfaces disposing off or leveling the excavated earth or sorting and stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches plinth sides of foundations etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour tools usage and other appurtenances required to complete the work.In all kinds of soils. Depth upto 1.50m complete with all lead and lifts and as per the directions of Engineer in charge of the work. Cum 24.30 508.20 12349.26 Star rate not applicable
147 PVC pipes of 8 Kg cm2 for 200mm complete with all lead and lifts and as per the directions of Engineer in charge of the work. M 30.00 983.85 29515.50 Star rate not applicable
148 PVC pipes of 8 Kg cm2 for 160mmcomplete with all lead and lifts and as per the directions of Engineer in charge of the work. M 109.50 639.45 70019.77 Star rate not applicable
149 PVC pipes of 8 Kg cm2 for 110mm complete with all lead and lifts and as per the directions of Engineer in charge of the work. M 89.40 297.15 26565.21 Star rate not applicable
150 Providing and fixing PTMT grating of approved quality and colour.Circular type 100 mm nominal diacomplete with all lead and lifts and as per the directions of Engineer in charge of the work. M 50.00 43.05 2152.50 Star rate not applicable
151 Providing and fixing 100 mm sand cast Iron grating for gully trap. complete with all lead and lifts and as per the directions of Engineer in charge of the work. No 25.00 49.35 1233.75 Star rate not applicable
152 S.C.I. gully or nahani grating 100 mm diacomplete with all lead and lifts and as per the directions of Engineer in charge of the work. No 70.00 33.60 2352.00 Star rate not applicable
153 Providing and fixing brass bib cock of approved quality 15 mm nominal bore complete with all lead and lifts and as per the directions of Engineer in charge of the work. No 35.00 300.30 10510.50 Star rate not applicable
154 Providing and fixing PTMT extension nipple for water tank pipe fittings of approved quality and colour. 25mm nominal bore weighing not less than 62 g complete with all lead and lifts and as per the directions of Engineer in charge of the work. No 75.00 110.25 8268.75 Star rate not applicable
155 Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts collar and bush of approved quality and colour. 15 mm nominal bore with 45 cm length complete with all lead and lifts and as per the directions of Engineer in charge of the work. No 80.00 121.80 9744.00 Star rate not applicable
156 Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee including cutting and threading the pipe etc. complete 25 to 40 mm nominal borecomplete with all lead and lifts and as per the directions of Engineer in charge of the work. No 80.00 638.40 51072.00 Star rate not applicable
157 Providing and fixing brass stop cock of approved quality 15 MM Nominal bore complete with all lead and lifts and as per the directions of Engineer in charge of the work. No 35.00 313.95 10988.25 Star rate not applicable
158 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) complete with all lead and lifts and as per the directions of Engineer in charge of the work. No 15.00 576.45 8646.75 Star rate not applicable
159 Providing and fixing gun metal non return valve of approved quality (screwed end) 25 mm nominal bore Horizontal Typecomplete with all lead and lifts and as per the directions of Engineer in charge of the work. No 10.00 651.00 6510.00 Star rate not applicable
160 Providing PVC ringtite pipes conforming to IS 4985 2000 with latest amendments and conveying to worksite rolling and lowering into trenches laying true to line and level and perfect linking at joints testing and commissioning including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type with all labour with all lead and lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For PVC pipes 25mm dia 10 kg sqcm and class 5 complete with all lead and lifts and as per the directions of Engineer in charge of the work. M 208.00 50.40 10483.20 Star rate not applicable
161 Supplying of special moulded variety PVC couplers as per IS 7834 1987 and fabricated as per IG124 1984 with ISI mark and with its latest amendments to walk site 25mm dia PVC couplerscomplete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 74.00 12.60 932.40 Star rate not applicable
162 Supply and delivery at site special moulded variety PVC elbows as per IS 7834 1987 and fabricated as per IG124 1984 with ISI mark with its latest amendments 25 mm dia PVC Elbowscomplete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 25.00 16.80 420.00 Star rate not applicable
163 Supply and delivery at site special moulded variety PVC tee as per IS 7834 1987 and fabricated as per IG124 1984 with ISI mark with its latest amendments 25 mm dia PVC Teecomplete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 20.00 22.05 441.00 Star rate not applicable
164 Supply of PPR Gate valve confirming to IS 15801 2008 and DIN Standards 8077 8092 PPR Gate valve 25mm complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 8.00 435.75 3486.00 Star rate not applicable
165 Providing and fixing rectangular high density polyethylene water storage loft tank with cover conforming to ISI 12701 colour of opaque white or as approved by Engineer in charge. The rate includes making necessary holes for inlet outlet and over flow pipes. The base support i c fittings and fixtures for tank shall be paid separately.complete with all lead and lifts and as per the directions of Engineer in charge of the work. L 4000.00 9.45 37800.00 Star rate not applicable
166 Supply and delivery at site Accessories for Single Phase pumpset like SS Groove NipplesSS Studs and NutsScrew Clips and water proof Insulation Tape etc complete with ISI mark complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 1.00 4725.00 4725.00 Star rate not applicable
167 Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat and lid fixed with C.P. brass hinges and rubber buffers 10 litre low level flushing cistern with fitting and brackets 40 mm flush bend 20 mm over flow pipe with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets cutting and making good the walls and floors wherever required White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend.complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 4.00 9063.60 36254.40 Star rate not applicable
168 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid 10 litre low level white vitreous china flushing cistern and C.P. flush bend with fittings and C.I. brackets 40 mm flush bend overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 12.00 6275.85 75310.20 Star rate not applicable
169 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete including painting of fittings and brackets cutting and making good the walls and floors wherever required One urinal basin with 5 litre white P.V.C. automatic flushing cistern Schedule of rates complete with all lead and lifts and as per the directions of Engineer in charge of the work. Unit 9.00 4676.70 42090.30 Star rate not applicable
170 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Schedule of rates complete with all lead and lifts and as per the directions of Engineer in charge of the work. Unit 12.00 1281.00 15372.00 Star rate not applicable
171 Providing and fixing wash basin with C.I. brackets 15 mm C.P. brass pillar taps 32 mm C.P. brass waste of standard pattern including painting of fittings and brackets cutting and making good the walls wherever require White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps Schedule of rates complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 12.00 3236.10 38833.20 Star rate not applicable
172 Providing and constructing of Machinehole chambers conical in shape at top with CC 1 3 6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15m alround the chamber and brick masonry in C.M 1 4 plaster with bricks of approved quality and CM plaster 1 3 proportion 12mm thick inside and outside except for the conical surface outside where the thickness of plaster shall be 20 mm thick with 1 to 6 slope in the concrete towards the central drain finished smooth and fixing of pipes in CC 1 2 4 with graded metal of 20 mm and down size including Providing and fixing SFRC Machinehole frame and cover confoming to IS 12592(Part I) 1988 and IS 12592(Part II) 1991 with latest amendments in CC 1 2 4 Providing and fixing of plastic foot steps staggered at 30cms apart as directed watering curingbarricading danger lighting pouring tar over M.H. frame and cover cost of tar shoring strutting dewatering engraving Machinehole No. on the inner and outer conical surface etc. as per the drawing with all lead and lift for various diameters and depths noted below. With Table Moulded Bricks and Medium Duty cover and frame.For 1.2m dia Constructing Table Moulded Bricks Machinehole 1.2 m internal dia 3.0M depth and Medium duty SFRC cover and frame complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 1.00 74631.90 74631.90 Star rate not applicable
173 Supplying heavy gauge PVC conduit pipe . mm dia..mm thick confirming to IS 2509 with suitable size bends metal PVC Junction boxes adhesive paste etc. and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures run with 18SWG GI fish wire wherever necessary.19 20 mm dia 2 mm thick complete with all lead and lifts and as per the directions of Engineer in charge of the work M 225.00 69.30 15592.50 Star rate not applicable
174 Supplying heavy gauge PVC conduit pipe mm dia..mm thick confirming to IS 2509 with suitable size bends metal PVC Junction boxes adhesive paste etc. and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures run with 18SWG GI fish wire wherever necessary.25 mm dia 2 mm thick complete with all lead and lifts and as per the directions of Engineer in charge of the work. M 315.00 81.90 25798.50 Star rate not applicable
175 Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends metal junction boxes adhesive paste etc.by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary.19 20 mm dia 2 mm thick complete with all lead and lifts and as per the directions of Engineer in charge of the work. M 135.00 71.40 9639.00 Star rate not applicable
176 Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends metal junction boxes adhesive paste etc.by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary.25 mm dia 2 mm thick complete with all lead and lifts and as per the directions of Engineer in charge of the work. M 165.00 82.95 13686.75 Star rate not applicable
177 Supplying and fixing PVC metal conduit Deep junction box 19 20 mm deep Junction box complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 45.00 51.45 2315.25 Star rate not applicable
178 Supplying and fixing PVC metal conduit Deep junction box 25 mm deep Junction box complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 60.00 58.80 3528.00 Star rate not applicable
179 Supplying And Fixing Metal Fan Box with Round Hook complete with all lead and lifts and as per the directions of Engineer in charge of the work. No 31.00 122.85 3808.35 Star rate not applicable
180 Supply and laying of under floor(concealed) race ways manufactured from1.5mm thick cover and base (including partitions for multi compartment raceways) zero spangle pre galvanized sheet steel with 275GSM(36.67microns) coating mass cover and base MIG welded together. the length of raceways shall be2.5meters per length with single accessories acting as duct connector including fastening clamps and vertical access boxes and with all required connected accessories complete and load bearing capacity in line with EN 50085 2 2 50 x 38 x 2500mm 1 compartment complete with all lead and lifts and as per the directions of Engineer in charge of the work. M 240.00 662.55 159012.00 Star rate not applicable
181 Supplying and wiring adopting loop system in existing PVC Conduit casing capping using 2x1.5Sqmm (Phase and Neutral) and 1x1.0 Sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS 694 and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet gang box the other end of the wires shall be terminated with sufficient loose length in a wood PVC round block. complete for each outlet.Short point upto 3Mtr from tapping point to out let via switch complete with all lead and lifts and as per the directions of Engineer in charge of the work. Point 43.00 299.25 12867.75 Star rate not applicable
182 Supplying and wiring adopting loop system in existing PVC Conduit casing capping using 2x1.5Sqmm (Phase and Neutral) and 1x1.0 Sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS 694 and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet gang box the other end of the wires shall be terminated with sufficient loose length in a wood PVC round block. complete for each outlet.Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch complete with all lead and lifts and as per the directions of Engineer in charge of the work. Point 43.00 413.70 17789.10 Star rate not applicable
183 Supplying and wiring adopting loop system in existing PVC Conduit casing capping using 2x1.5Sqmm (Phase and Neutral) and 1x1.0 Sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS 694 and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet gang box the other end of the wires shall be terminated with sufficient loose length in a wood PVC round block. complete for each outlet.Long point above 6Mtr upto 10Mtr from tapping point to out let via switch complete with all lead and lifts and as per the directions of Engineer in charge of the work. Point 62.00 598.50 37107.00 Star rate not applicable
184 Wiring for lighting power circuit using one of FRLS PVC insulated 1100V grade multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694 20101 mm2 complete with all lead and lifts and as per the directions of Engineer in charge of the work. M 540.00 19.95 10773.00 Star rate not applicable
185 Wiring for lighting power circuit using one of FRLS PVC insulated 1100V grade multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694 20101.5 mm2 complete with all lead and lifts and as per the directions of Engineer in charge of the work. M 600.00 27.30 16380.00 Star rate not applicable
186 Wiring for lighting power circuit using one of FRLS PVC insulated 1100V grade multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694 20102.5 mm2 complete with all lead and lifts and as per the directions of Engineer in charge of the work. M 900.00 44.10 39690.00 Star rate not applicable
187 Wiring for lighting power circuit using one of FRLS PVC insulated 1100V grade multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694 2010 4 mm2 complete with all lead and lifts and as per the directions of Engineer in charge of the work. M 540.00 66.15 35721.00 Star rate not applicable
188 Wiring for lighting power circuit using one of FRLS PVC insulated 1100V grade multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694 2010 6 mm2 complete with all lead and lifts and as per the directions of Engineer in charge of the work. M 540.00 96.60 52164.00 Star rate not applicable
189 Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick Stone C.C wall 1 2 Way complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 6.00 144.90 869.40 Star rate not applicable
190 Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick Stone C.C wall 3 Way complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 9.00 166.95 1502.55 Star rate not applicable
191 Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick Stone C.C wall 6 Way complete with all lead and lifts and as per the directions of Engineer in charge of the work Each 9.00 231.00 2079.00 Star rate not applicable
192 Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick Stone C.C wall 8 Way complete with all lead and lifts and as per the directions of Engineer in charge of the work Each 21.00 274.05 5755.05 Star rate not applicable
193 Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick Stone C.C wall 10 12 Way complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 24.00 334.95 8038.80 Star rate not applicable
194 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws bolts nuts etc. complete on the existing metal PVC box. 3 Module complete with all lead and lifts and as per the directions of Engineer in charge of the work Each 6.00 143.85 863.10 Star rate not applicable
195 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws bolts nuts etc. complete on the existing metal PVC box. 3 Module complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 9.00 169.05 1521.45 Star rate not applicable
196 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws bolts nuts etc. complete on the existing metal PVC box. 6 Module complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 9.00 245.70 2211.30 Star rate not applicable
197 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws bolts nuts etc. complete on the existing metal PVC box. 8 Module complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 21.00 298.20 6262.20 Star rate not applicable
198 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws bolts nuts etc. complete on the existing metal PVC box. 10 12 Module complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 24.00 361.20 8668.80 Star rate not applicable
199 Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6A One Way Switch complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 90.00 107.10 9639.00 Star rate not applicable
200 Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6A Two Way Switch complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 15.00 174.30 2614.50 Star rate not applicable
201 Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293 Stepped Fan Regulator Two Module complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 31.00 374.85 11620.35 Star rate not applicable
202 Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293 16A One Way Switch complete with all lead and lifts and as per the directions of Engineer in charge of the work Each 12.00 189.00 2268.00 Star rate not applicable
203 Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6 16A Universal Socket complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 60.00 247.80 14868.00 Star rate not applicable
204 Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293 RJ45 I.O Outlet Cat 6 complete with all lead and lifts and as per the directions of Engineer in charge of the work Each 330.00 353.85 116770.50 Star rate not applicable
205 Supplying and fixing 32A security and energy saving DP switch with key tag suitable to operate on 230 V 50HZ AC supply and completely wired on existing box. complete with all lead and lifts and as per the directions of Engineer in charge of the work Each 12.00 678.30 8139.60 Star rate not applicable
206 Supplying And fixing replacing of 6 16 32A electrical accessories on existing switch board.6A Bakelite Ceiling Rose complete with all lead and lifts and as per the directions of Engineer in charge of the work. No 90.00 81.90 7371.00 Star rate not applicable
207 Supplying And fixing replacing of 6 16 32A electrical accessories on existing switch board.6A Batten Holder complete with all lead and lifts and as per the directions of Engineer in charge of the work. No 69.00 77.70 5361.30 Star rate not applicable
208 Supplying and fixing of Porcelain fuse channel with cut out on existing wooden panel using necessary nuts bolts and washers 100 A complete with all lead and lifts and as per the directions of Engineer in charge of the work. No 4.00 725.55 2902.20 Star rate not applicable
209 Supplying and fixing Moulded Case Circuit Breaker (MCCB)over the existing wood panel board using necessary screwsbolts nuts necessary phase separatorshandle and wiring complete. Protection of Overload and Short circuit with adjustable thermal magnetic release Micro processor release shall have Earth Fault as per IS IEC 60947 2 . (Icu equal 100 Percentagelcs). In 4PMCCB all Poles should have protection for Short Cicrcuit Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non Priority loads must be available in the MCCB. MCCB shall be provided with double insulation(insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. FOUR Pole 100 A 25 kA complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 1.00 8911.35 8911.35 Star rate not applicable
210 Supplying and fixing regular MCCB distribution Panel confirming to IS IEC61439 3 and IK09 tested as per IS IEC62262 with minimum IP43 protection provided with Polyurethane (PUR) gasket with suitable earthing system onwall wood board flush mounting using required cl A bolts nuts etc.with provision for fixing of suitable type capacity MCCB's as an incomer for 3phase Double door with necessary busbar completely wired to use on 440V 3phase 4wire powder coated painting etc. complete with a provision for fixing of single three phase suitable capacity MCB's as outgoings confirming to IS IEC 60898 2.12 Way complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 4.00 16305.45 65221.80 Star rate not applicable
211 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C'Type curve indicator ON OFF energy cross 3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6 32 A DP complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 13.00 775.95 10087.35 Star rate not applicable
212 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C'Type curve indicator ON OFF energy cross 3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6 32 A TPN complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 7.00 1802.85 12619.95 Star rate not applicable
213 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C'Type curve indicator ON OFF energy cross 3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 50 63 A TPN complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 6.00 3242.40 19454.40 Star rate not applicable
214 Supplying and fixing regular MCB distribution boards on wall ood board flush mounting using required clamps bolts nuts etc. with provision for fixing suitable type capacity MCB's single phase 3 phase single door with powder coated painting Made out of 14SWG MS enclosure.I Single Door 8 Way SP and N complete with all lead and lifts and as per the directions of Engineer in charge of the work Each 4.00 1566.60 6266.40 Star rate not applicable
215 Supplying fixing and wiring Residual current circuit breaker (RCCB) 240 450V upto 300mA sensitivity on existing wood panel board.16A 25A 2 pole complete with all lead and lifts and as per the directions of Engineer in charge of the work Each 4.00 4490.85 17963.40 Star rate not applicable
216 Supplying fixing and wiring Residual current circuit breaker (RCCB) 240 450V upto 300mA sensitivity on existing wood panel board. 32 40A 4 pole complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 4.00 5404.35 21617.40 Star rate not applicable
217 Supplying fixing and wiring earth leakage relay with core balanced current transformer suitable forsingle phase 50HZ AC with latest microcontroller based digital readout of percentage leakage current programmable delay auto manual reset facility suitableto mount on DIN rail flush mounting on panel board. complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 1.00 9717.75 9717.75 Star rate not applicable
218 Supplying fixing and wiring 0 to 600V 96x96mm AC Voltmeter on existing panel wood board. complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 1.00 474.60 474.60 Star rate not applicable
219 Supplying fixing and wiring 0 to 100A Direct Reading AC analog type Ammeter complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 1.00 550.20 550.20 Star rate not applicable
220 Supplying fixing and wiring rotary selector switch suitable for Ammeter complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 1.00 210.00 210.00 Star rate not applicable
221 Supplying fixing and wiring rotary selector switch suitable for Voltmeter complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 1.00 168.00 168.00 Star rate not applicable
222 Supplying fixing and wiring 3 Phase Digital Ammeter Voltmeter complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 1.00 1496.25 1496.25 Star rate not applicable
223 Supplying fixing and wiring Electronic Trivector Meter(ETV) 5to 32 63A three phase 4wire whole current class 1Accuracy Energy Meter. complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 1.00 5990.25 5990.25 Star rate not applicable
224 Supplying fixing and wiring heavy duty low voltage capacitors conforming to IS2834.3 phase400 440Vgrade for power factor improvement of rotating machineries like induction motor. complete with all lead and lifts and as per the directions of Engineer in charge of the work. KVAR 5.00 504.00 2520.00 Star rate not applicable
225 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230 440VAC. 50 HZ 12 24V D.C. complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 4.00 540.75 2163.00 Star rate not applicable
226 Supplying and fixing angle iron frame work fabricated out of M.S. angle iron..and M.S.Flat......with boltswashers etc.and painted with 2 coats of red oxide and then two coats of approved paint. 50 x 50 x 6 mm complete with all lead and lifts and as per the directions of Engineer in charge of the work. M 5.00 414.75 2073.75 Star rate not applicable
227 Supply and Installation Fixing Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid shock proof IP65(Weather Proof) rust proof dust proofwater proofcorrosion proof having internally Embedded gasket on both lid and flap suitable to fix Single Phase Three Phase Energy Meter insuitable base plate and having a provision for Fuse MCB cut out with suitable transparent hinged flap opening for operating MCB along with complete tamper proof SEALING facility.300 mm x 600 mm x 170 mm complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 2.00 7210.35 14420.70 Star rate not applicable
228 Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50HZ AC Supply complete 12 inch Sweep (300 mm) complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 16.00 3117.45 49879.20 Star rate not applicable
229 Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS 374 19 and also comply with IS 1709 1984 with latest amendment Rated voltage 220V 50HZ Rated power upto 35W plus 10 Percentage Rated current As per IS 374 19 Rated power factor 0.9 lagging(min) Rated speed 350 plus 10 Percentage RPMRated air delivery210 plus 10 Percentage Cubic Meter Minimum Rated service value 6.2CMM W Three Blades of blade leaf 1.05mm thick Aluminium Alloy sheet Class B motor insulation Bearing Two ball bearingsTop 6202Bottom6201as per IS specification Motor winding. Temp rise Shall not exceed 75deg Cover and ambient of 40 0C by resistance method at 245V Insulation resistance Shall not be less than Two Mega Ohms (2MOhms) Leakage current Should not exceed 210Micro AmpPower input W and currentAir Delivery and Fan Speed as per IS 374 2019 with latest amendment 2 year manufacturer Warranty. (BLDC fans) 48 inch Sweep 5 Star (1200 mm) complete with all lead and lifts and as per the directions of Engineer in charge of the work Each 31.00 4518.15 140062.65 Star rate not applicable
230 Supplying ......TR split Air conditioners suitable for operation on A C supply single phase 50HZ 230V with hermetically sealed compressor with air cooled condensermotor capacitor and start run capacitors relay and overload protector internal unit with one indoor and one outdoor unit The condenser unit will be placed outside the room on the terrace to avoid noise including standard length of suitable size copper tubing covered with insulationtube. (Highwall chorded cordless) suitable capacity 3 core sheathed PVC copper cable and a battery operated wireless remote unit 1.5 Ton capacity complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 11.00 50067.15 550738.65 Star rate not applicable
231 Installation charges for split type air conditioner with allied works for one indoor and one outdoor unit is tobe mounted on suitable Angle Iron support upto 3.0 Ton split cassette type A C. complete with all lead and lifts and as per the directions of Engineer in charge of the work Each 11.00 3333.75 36671.25 Star rate not applicable
232 Supplying installing testing and commissioning of Diesel Generator set with following specifications. Power rating as per standard reference condition as perBS5514 ISO3046 ISO8528 and IS 1002 ISO 3046 Generator set specifications Engine Diesel generating set are rated at1500RPM and conform to ISO8528 specifications. The engines are radiator cooled four stroke and multi cylinder conforming to ISO 3046. The scope of supplyi ncludesElectrical starter motor 12VDC Battery charging alternator Bosch fuel system with mechanical governor A1 Class. Spinon lubeoil filter Spinondual fuel filter with water separator Turbocharger Charge air cooler Silencer Hospital grade Dry type aircleaner Shutoff coil Flywheel and fly wheel housing First fill of lube oil and coolant Safety for low lube oil pressureSafety for high water temperature Permissible overload of 10percent for one hour in 12 hours of operation Capacity of Fuel Tank Fuel tank suitable for 8 hours of operation Alternator Alternator is suitable for operation at 1500 RPM415 V 0.8 pf lag suitable for 50 HZ 3 phase 4 wire systems conforming to IS IEC 600341. The Alternator is brush less type screen protected revolving field self excited self regulated through an AVR. The alternator shall have Plus or minus 1.0percent Voltage regulation max in static conditions IP 23 protections with insulation class F andH Mounting arrangement Engine and alternator are mounted on a common MS fabricated base frame with AVM pads Control Panel The control panel is manufactured with 14 16 gauge CRCA sheet and is powder coated for weatherproof and long lasting finish. The control panel consists of the following parts PS0500 Controller Aluminium bus bars with suitable capacity within outgoing terminals Indicating lA for Load On and Set Running Instrument fuses duly wired and ferruled MCCB of suitable rating with overload and short circuit protections Genset Controller microprocessor based generator set monitoring and control system. The control provides a simple operator interface to the generator set manual and remote start stop control shutdown fault indication and an LCD hour counter. The integration of all functions into a single control system provides enhanced reliability and performance compared to conventional generator set control systems. This control has been designed and tested to meet harsh environment in which gensets are typically applied. Features Functions protections 16 character x 2 line alphanumeric LCD display with LED Backlight. Operator interface Provide a record of most recent fault conditions. Fault history stored in the control non volatile memory Provide Alternator Data. Voltage 1 ph or 3 ph line to line and line to neutral voltage Current 1 ph or 3 ph kVA 3 ph and total Frequency Provide Engine Data Starting battery voltage Engine running hours Engine Temp Engine oil pressure Control includes provision for Service adjustment and calibration of DG control functions Voltage frequency selection Configurable input and output set up Meter calibration Engine controls Power Start operates on 12 VDC batteriesAuto start mode accepts a ground signal from remote devices to automatically start the DG set The remote start will also wake up the control system from sleep mode Engine Starting The control system supports automatic engine starting Primary and back up start disconnects are achieved by battery charging alternator feedback or main alternator output frequency. Controller provide configurable time delay of 0300 sees to start after remote start signal and time delay of 0 600secs prior to shut down after stop signal. Sleep mode increase battery life 30KVA 24kw complete with all lead and lifts and as per the directions of Engineer in charge of the work. Set 1.00 479920.35 479920.35 Star rate not applicable
233 Supply Erection testing and commissioning of AMF panel suitable for15 KVA to 30 KVA DG set. The panel is of cubical type base floor mounting control panel with hinged doors undrilled bottom gland plate aluminium Bus Bar with the accommodation for .....A 4 pole contactor for alternator with thermal O L relay..... A 4 pole contactor for mains HRC fuse for short circuit protection Microprocessor based AMF module with supply failure timer Restoration timer 3 impulse automatic engine start stop logic Mains generator voltage ....capacity bypass switch and frequency sensing PCC 1301controller with water temperature Lube oil pressure engine speed Voltage ampere Frequency kVA Running hour count No of starts Fault indication over under speed Fails to start Low oil pleasure High engine temperature Under over voltage over current Earth fault relay with indications for Mains on Load on Mains Battery charger on Push buttons AMF module by pass Mode Battery charger unit with inbuilt Auto Manual and Flat Boost facility. The complete set shall have sufficient safety and adhere to NEC NBC 2016 IEC CPWD specifications PCB norms and KSGEI Acts and Rules. complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 1.00 61646.55 61646.55 Star rate not applicable
234 Supplying and fixing retrofit type PL LED Lamp ...... W LED linear source with CCT 6500 degree K CRIgrater than 70 Percentage. efficacy grater than80 lumen per W lifegrater than 25000 burning hours and Compliance to IS 10322 IEC 60598 LM 79 and LM 80. The LED are driven by HF electronic driver integrated in the system with PF grater than0.95 power loss should less than 5 Percentage of lamp Wage. short circuit and open circuit protection to be integrated in the circuit THD less than 20 Percentage Life as per LM 79. The operating input voltage should be between 130 to275 V. Tested by NABL CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.8 9 W complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 15.00 654.15 9812.25 Star rate not applicable
235 Supplying of .....feet PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours and 70 Percentage lumen maintenance with CRI grater than 80. Power Input 220 240V at 50 60HZ and Power factor grater than0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.LED light fitting 1 x 4ft 20 22 W complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 98.00 724.50 71001.00 Star rate not applicable
236 Supplying of recess mounting non integral type.. LEDw luminaire comprising of pressure decast extruded aluminium housing with spring loaded false ceiling clamps Power LEDs with CCT 6500degree KCRIgrater than70 Percentage. efficacygrater than100lumen per W 120 degree beam spread lifegrater than 25000 burning hours and Compliance to IS10322 IEC60598 LM79 and LM80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level LEDs are driven by HF electronic driver integrated in a separate control gear assembly. with PFgrater than0.95 power loss shouldless than5 Percentageof lamp Wage.short circuit and open circuit protection to be integrated in the circuit THD less than 20 Percentage Life as per LM79. The operating input voltage should be between 130 to 275V. BIS Approved and Tested by NABL CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition LED modular down light 2'x2ft36 W complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 18.00 4780.65 86051.70 Star rate not applicable
237 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material delivering superior light output Rated life Burning Hrs 50000 hr at Lumen Maintenance of 70 Percentage maximum light intensity should be between 60 degrees to 70 degrees. CCT grater than 5500K IP66 optical and electrical compartment and impact resistance of complete luminaire grater than IK08. Power Factor grater than0.9 with mains Surge Protection Min 5KV along with Over voltage Overload short circuit miss wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm.Universal Voltage driver to operate wide voltage range from 100V to 270V 50 60HZ application. Compliance to IS 10322 IEC 60598 LM 79 and LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiencygrater than1301m w nominal CRI grater than75. Luminaire manufacturer should have in house facility accredited by NABL CPRI and any Government certified agency and Design and Development facility certified by ISO 9001 2008. Housing with supplier word mark name shall be Engraved Embossing on the die cast housing Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer and Cree Nichia Lumileds Osram make LED Source.LED Streetlight 120W complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 1.00 10563.00 10563.00 Star rate not applicable
238 Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate clear glass material delivering superior light output Rated life Burning Hrs 50000 hr at Lumen Maintenance of 70 Percentage CCT grater than 5500K IP 66 optical and electrical compartment and impact resistance of complete luminaire grater than IK08. Power Factor grater than0.9 with mains Surge Protection Min 5KV along with Over voltage Overload short circuit miss wiring protection. Compatible for pole mauling with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100 V to 270V 50 60HZ application. Compliance to IS 10322 IEC 60598 LM 79 and LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ....... W System Power consumption. LED Efficiencygrater than 1301m w nominal CRI grater than75.Luminaire manufacturer should have in house facility accredited by NABL CPRI and any Government certified agency and Design and Development facility certified by ISO 9001 2008. Housing with supplier word mark name shall be Engraved Embossing on the die cast housing Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer and Cree Nichia Lumileds Osram make LED Source.LED Floodlight 100W complete with all lead and lifts and as per the directions of Engineer in charge of the work Each 4.00 9960.30 39841.20 Star rate not applicable
239 Supplying and fixing one of 230V Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote. complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 9.00 1249.50 11245.50 Star rate not applicable
240 Supplying fixing wiring earth electrode for grounding conduitsI.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm allround the pipe to complete depth. The connection from the pipe to the conduit etc. is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts nuts washers and check nuts etc. the pipe shall have 16 through holes of 12 mm dia complete with all lead and lifts and as per the directions of Engineer in charge of the work. No 9.00 3685.50 33169.50 Star rate not applicable
241 Supplying fixing and wiring earth electrode for grounding of lifts transformersDG sets etc.using 40mm dia 2.9mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode.The funnel should be enclosed in a CC chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150 mm all round with alternate layers of salt and charcoal from the bottom of the CC chamber.The connection from the electrode is to be established through GI strip using GI bolts and nuts complete with all lead and lifts and as per the directions of Engineer in charge of the work. No 6.00 4468.80 26812.80 Star rate not applicable
242 GI strips for grounding connections using necessary fixing materials as required. 25 x 3 mm GI strip complete with all lead and lifts and as per the directions of Engineer in charge of the work. M 60.00 86.10 5166.00 Star rate not applicable
243 Copper strips for grounding connections using necessary fixing materials as required. 25 x 3 mm Copper strip complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 20.00 598.50 11970.00 Star rate not applicable
244 Supplying and Fixing of........mm dia class A GI pipe bracket upto 2 ms long bent at suitable angle and fixing to this bracket street light fitting of all capacities to GI or GI or rail or RCC pole wall using suitable clamps bolts and nuts and wiring using suitable capacity wires.Using 32mm dia G.I.Pipe complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 4.00 1097.25 4389.00 Star rate not applicable
245 Fixing halogen metal halide SVL IL LED floodlight fitting over existing pole wall ceiling including clamps bolts nuts and wiring using suitable capacity wires complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 8.00 170.10 1360.80 Star rate not applicable
246 Fixing all types and all capacities of fluorescent false ceiling spot light CFL LED fittings indoor on the wall ceiling rafters girders using 23 0.0076 twin twisted PVC insulated wires required Nos of round blocks and clamps.On wall ceiling Rafter Girders complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 98.00 128.10 12553.80 Star rate not applicable
247 Fixing a ceiling Wall mounting fan of all capacities and all types to the existing 'S'fthook with fan regulator to the existing board together with supplying andfixing 5A. ceilingrose necessary length of23 0.0076 inch PVC insulated twin twisted copper wire and wiring. complete with all lead and lifts and as per the directions of Engineer in charge of the work Each 31.00 179.55 5566.05 Star rate not applicable
248 Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 A. ceiling rose with sufficient length of 23 0.0076 inch PVC insulated twin core wire. complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 16.00 516.60 8265.60 Star rate not applicable
249 Fixing a shunt capacitor of ... kVAR capacity with necessary clamps bolts and nuts on existing wooden or metal board including banking of more than one capacitor upto 5 kVAR complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 5.00 283.50 1417.50 Star rate not applicable
250 Fixing all types and all capacities of 1ftx4ft 2 inch x2ftLED Light fittings indoor on the wall ceiling rafters girders with necessary supporting frame using 2310.0076 inch twin twisted PVC insulated wires required Nos of round blocks and clamps. complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 18.00 514.50 9261.00 Star rate not applicable
251 Earth work excavation for pipelines cables by Manual means upto 600 mm trench width as per drawing and technical specifications including setting out shoring strutting barricading caution lights removal of stumps and other deleterious matter including dressing of excavated surfaces disposing off or leveling the excavated earth or sorting and stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches plinth sides of foundations etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour tools usage and other appurtenances required to complete the work. In all kinds of soils. Depth upto 1.50m complete with all lead and lifts and as per the directions of Engineer in charge of the work. M 40.00 508.20 20328.00 Star rate not applicable
252 Supplying of 95 Sqmm 3.5 Core (21 GI Strips 4 x 0.8 mm) XLPE or Heat resistant PVC insulated PVC exutruted Inner Seath Armoured LTUG Cable as per IS 1554 (Part 1) or IS 7098 Part 1 Armouring strip thickness and resistivity as per IS 3975 complete with all lead and lifts and as per the directions of Engineer in charge of the work. Km 0.05 391875.75 19593.79 Star rate not applicable
253 Epoxy Terminating Kit (Pothead) suitable for 1.1 kV LTUG Cable.Up to 3.5 x 70 95 120 Sqmm complete with all lead and lifts and as per the directions of Engineer in charge of the work. Set 2.00 401.10 802.20 Star rate not applicable
254 Laying of cable in Existing Trench GI pipe Stone Ware RCC Hume pipe using Wooden Aluminum Rollers as directed by the departmental staff LT cable 35 to 95 Sqmm complete with all lead and lifts and as per the directions of Engineer in charge of the work. Km 0.05 32695.95 1634.80 Star rate not applicable
255 Making and Fixing pot head for LT Cable Heat shrinkable Type Terminations 35 to 95 Sqmm complete with all lead and lifts and as per the directions of Engineer in charge of the work. Set 2.00 199.50 399.00 Star rate not applicable
256 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fining materials and 'C"Type curve indicator ON OFF energy cross 3 with Short droit breaking capacity of 10K and complete wiring as required confirming to IEC 60998 6 32 A DP complete with all lead and lifts and as per the directions of Engineer in charge of the work Each 1.00 775.95 775.95 Star rate not applicable
257 Geophysical investigation at site for sinking borewells for Providing drinking water to the habitation either through the Hand Pump MWS or P.W.S.S by vertical electrical sounding by adopting Venner or Schlumbergers's method including reconnaissance survey of geological formation. Geophysical investigation of existing ground water in the vicinity its quality quantity and acceptability of the users indicating the location of the site recommended depth of casing pipe required to seal the top unconsolidated formation including an extra depth of 1.0 metre in consolidated formation for proper seating of casing pipe depth of drilling required to cover full depth of aquifer proposed to be tapped probable yield and other information required including transportation of instruments and ccessories to work site engaging technical personal and labour required NOTE 1)Additional rate on item 1 and 2 is allowed for drilling in over burden and fixing Casing pipes beyond 20 M (for fixing Casing pipes only) a) Above 20 M and upto 30 M15 Percentage b) Above 30 M 30 Percentage (Measurement of overburden is restricted to the depth of casing pipe fixed excluding initial depth of 20M and projection above ground level). 2) A sum of Rs. 100 is to be deducted for Dry Borewell towards yield test complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 1.00 5288.00 5288.00 Star rate not applicable
258 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG and above 1100 CMF and above in all strata including over burdern upto 20 m. Fixing of casing pipes collars and cap with necessary cutting threading and welding including ransportation of rig and supporting vehicle crew charges and cost of consumables etc.complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes collars cap etc. complete ) (Above 450m of drilling add 10 Percentage for every 50m depth) Borewell depth of 0 to 50 Mtrscomplete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 50.00 370.00 18500.00 Star rate not applicable
259 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG and above 1100 CMF and above in all strata including over burdern upto 20 m. Fixing of casing pipes collars and cap with necessary cutting threading and welding including ransportation of rig and supporting vehicle crew charges and cost of consumables etc.complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes collars cap etc. complete ) (Above 450m of drilling add 10 Percentage for every 50m depth) Borewell depth of 50 to 100 Mtrs complete with all lead and lifts and as per the directions of Engineer in charge of the work. Rmtr 50.00 464.00 23200.00 Star rate not applicable
260 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG and above 1100 CMF and above in all strata including over burdern upto 20 m. Fixing of casing pipes collars and cap with necessary cutting threading and welding including ransportation of rig and supporting vehicle crew charges and cost of consumables etc.complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes collars cap etc. complete ) (Above 450m of drilling add 10 Percentage for every 50m depth) Borewell depth of 10 to 150 Mtrscomplete with all lead and lifts and as per the directions of Engineer in charge of the work. Rmtr 50.00 493.00 24650.00 Star rate not applicable
261 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG and above 1100 CMF and above in all strata including over burdern upto 20 m. Fixing of casing pipes collars and cap with necessary cutting threading and welding including ransportation of rig and supporting vehicle crew charges and cost of consumables etc.complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes collars cap etc. complete ) (Above 450m of drilling add 10 Percentage for every 50m depth) Borewell depth of 150 to200 Mtrs complete with all lead and lifts and as per the directions of Engineer in charge of the work. Rmtr 25.00 572.00 14300.00 Star rate not applicable
262 Supply of ISI mark 175mm nominal boreplain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270 2001 and latest ammendments electrical resistance welded steel tubes material and conforming to IS 1387 1993 and manufactured by basic open hearth electric or basic oxygen process in random length of 5 7m both ends.threaded conforming to IS 554 1985 one end fixed with socket conforming to IS 4270 2001 and the other end with screwed pipes all shall be responsibaly free from defects. The tubes shall be responsible straight end should be with ISI marking weighing 25.10kg m.prices include Collar Medium duty. complete with all lead and lifts and as per the directions of Engineer in charge of the work. Rmtr 35.00 1933.00 67655.00 Star rate not applicable
263 Providing and fixing MS casing collars as per IS 1239 (part II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part II) 1982 with all amendments complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 8.00 150.00 1200.00 Star rate not applicable
264 Providing and laying at site of work MS casing caps as per IS 1239 (part II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part II) 1982 with all amendments including cost of material and labour charges for fixing if any etc. complete with all lead and lifts and as directed by the Ingineering incharge complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 1.00 164.00 164.00 Star rate not applicable
265 Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034 2000;3Phase SS Bowl and Impeller with Low volt Motor as per specifications to work site as per necessary ammendments and instructions of engineer incharge of work. For 3 HP etc. complete 7.50 HP 155 LPM at 112 m equal 10 STG Outlet Dia 2.00 complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 1.00 34213.00 34213.00 Star rate not applicable
266 Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694 1990 with ISI Mark and as per its latest amendments.1x3x4 Sqm complete with all lead and lifts and as per the directions of Engineer in charge of the work. Rmtr 160.00 135.00 21600.00 Star rate not applicable
267 Supply and delivery at site of brand new best make non return valve as per IS 778 1984 with ISI Mark and as per its latest amendments complete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 1.00 1250.00 1250.00 Star rate not applicable
268 Supply installingtesting and commissioning COMMON control panel consisting of the following INCOMING 1 No set of Phase indicating lamps with SFU of suitable rating 1 No Analog Ammeter 1 No Analog Voltmeter 1ni with Phase selector switch Isolating switch OUTGOING for Main Electrical Pump 1 No. MCB 1 No. DOL of S D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor under voltage over Volage under current over current and dry run protection suitable for the pump described above 1 no Indoor type NOTE 1) DOL Direct Online Starter 2) S D Star Delta Startercomplete with all lead and lifts and as per the directions of Engineer in charge of the work. Each 1.00 17500.00 17500.00 Star rate not applicable
269 Supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (C Class) as per IS 1239 (Part I) 1990 with latest amendments with ISI Mark (one end fitted with Heavy Duty collar and other end fitted with protection 50 mm complete with all lead and lifts and as per the directions of Engineer in charge of the work. each 27.00 3050.00 82350.00 Star rate not applicable
270 Labour charges for Erection Electrification and commissioning of Pump sets including aligning and balancing of all items including supply and erection of two pair of supporting clamps bore well caps cable clips and water tight gland cable protectors bolts nuts valve and gaugestools and equipments etc. involved in the job as per specifications with ecessary tests as per specifications with testing of as per instructions of engineer incharge of work Each 1.00 6500.00 6500.00 Star rate not applicable
271 Labour charges for erection of outdoor type panel board and meter board units with all necessary materials and labour tools and equipments including providing cement concrete foundation bed etc. complete as per specification with testing of as per instructions of engineer incharge of work. Each 1.00 1450.00 1450.00 Star rate not applicable
272 K E B Registration Charges For 7.5 HP Pump and Morter complete with all lead and lifts and as per the directions of Engineer in charge of the work. LS 1.00 17500.00 17500.00 Star rate not applicable
273 Providing and fixing aluminium work for doors windows ventilators and partitions with extruded built up standard tubular sections appropriate sections and other sections of approved make conforming to IS 733 and IS 1285 fixing with dash fasteners of required dia and size including necessary filling up the gaps at junctions i.e. at top bottom and sides with required EPDM rubber neoprene gasket etc. Aluminium sections shall be smooth rust free straight mitred and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing paneling C.P. brass stainless steel screws all complete as per architectural drawings and the directions of Engineer in charge. (Glazing paneling and dash fasteners to be paid for separately) For shutters of doors windows and ventilators including providing and fixing hinges pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber neoprene gasket required (Fittings shall be paid for separately) Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) including cost of materials labour usage charges of machinery complete as per specifications. complete with all lead and lifts and as per the directions of Engineer in charge of the work. Kg 2498.03 611.10 1526546.13 Star rate not applicable
274 Providing and fixing glazing in aluminium door window ventilator shutters and partitions etc. with EPDM rubber neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in charge . (Cost of aluminium snap beading shall be paid in basic item) With float glass panes of 8 mm thickness (weight not less than 20 kg m2) including cost of materials labour usage charges of machinery complete as per specifications complete with all lead and lifts and as per the directions of Engineer in charge of the work. Sqm 24.82 1370.25 34009.61 Star rate not applicable
275 Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS 12823 Grade l Type ll in panelling fixed in aluminum doors windows shutters and partition frames with C.P. brass stainless steel screws etc. complete as per architectural drawings and directions of engineer in charge Pre laminated particle board with decorative lamination on both sides including cost of materials labour usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge. Sqm 49.61 1032.15 51204.96 Star rate not applicable
276 Providing and supplying 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand bo xesshelvesracksalmirahcupboard and drawer etc. including necessary nailsscrews etc. complete as per direction of Engineer in charge. Sqm 474.64 1165.50 553192.92 Star rate not applicable
277 Providing and fixing stainless steel 304 grade fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer in charge. (150mm length) complete with all lead and lifts and as per the directions of Engineer in charge of the work. No 74.00 1417.50 104895.00 Star rate not applicable
278 Providing and fixing stainless steel 304 grade soft closing hinges with two hole fixing and 165 degrees turning option for Wardrobe Doors Kitchen and other utilities of reputed make with screws etc. complete as per directions of Engineer in charge No 160.00 236.25 37800.00 Star rate not applicable
279 Providing and fixing Stainless Steel soft closing heavy telescopic drawer channels of approved make 500mm long with screws etc. including making necessary recess in board and finished etc. complete as per direction of Engineer in charge. No 296.00 273.00 80808.00 Star rate not applicable
280 Providing and fixing 2mm thick 16 to 19mm wide PVC edge binding tape of approved quality for cupboard wardrobe kitchen shutters including necessary synthetic resin hot pressed to edges on binding machine etc. complete as per directions of Engineer in charge. M 289.00 4.20 1213.80 Star rate not applicable
281 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge. SS Tower bolt 150X10mm complete with all lead and lifts and as per the directions of Engineer in charge of the work No 40.00 126.00 5040.00 Star rate not applicable
282 Providing and fixing magnetic catcher of approved quality in cupboard ward robe shutters including fixing with necessary screwscomplete with all lead and lifts and as per the directions of Engineer in charge of the work No 50.00 61.95 3097.50 Star rate not applicable
283 Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete 40 mm complete with all lead and lifts and as per the directions of Engineer in charge of the work Each 46.00 326.55 15021.30 Star rate not applicable
284 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg m3 and minimum compressive strength of 4.00 N mm2 conforming to IS 2185 (Part I) 2005 and constructed with CM 1 4 as per IS 2572 2005 including cost of all materials labour scaffolding and curing usage charges of machinery etc complete as per specifications. complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 3.50 1375.50 4814.25 Star rate not applicable
285 Providing 12 mm cement plaster with cement mortar 1 4 (1 cement 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering providing and removing scaffolding including cost of materials labour curing complete as per specifications and as per directions of Engineer in charge. Sqm 21.20 267.75 5676.31 Star rate not applicable
286 Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works and super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers well compacted using needle vibrators. The cost includes all lead and lifts cost of all materials quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all other appurtenances required to complete the work as per technical specifications. 2.5.2 M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 1.68 7070.70 11878.79 Star rate not applicable
287 Providing and laying Polished Granite stone flooring in required design and patterns in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1 4 (1 cement 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing curing and polishing etc. all complete as specified and as directed by the Engineer in Charge.Polished Granite stone slab Black Cat Eye River Pink or equivalent complete with all lead and lifts and as per the directions of Engineer in charge of the work. Sqm 6.50 2990.40 19437.60 Star rate not applicable
288 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Two coats applied on walls at 1.25 ltr 10 m2 over and including one coat of Special primer applied at 0.75 ltr 10 m2 with paint of approved quality to give an even shade after thoroughly brooming the surface to remove all dirt dust mortar drops and foreign matter including preparing the surface even and sand paper smooth cost of materials labour complete as per specifications and as per directions of Engineer in charge. Vol 2 46 8.33.1 complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 21.20 165.90 3517.08 Star rate not applicable
289 Providing and fixing Single seater Recliner with cushion of size 3(L)x2.5(W)X2.75(H) ft made of Polyurethane or High performance upholstery fabric with seats fitted with cushion padding springs webbing and as per direction of engineer in charge No 2.00 31500.00 63000.00 Star rate not applicable
290 Providing and fixing of Tea table 900mm x 750mm 450mm with 12mm thick ethched tempered glass with bevelled drawing made out of BWP ply and out faces laminated with 4mm thick veneer or 1mm thick laminate complete with all lead and lifts and as per the directions of Engineer in charge of the work No 1.00 7875.00 7875.00 Star rate not applicable
291 Original Schmidt N ( PROCEQ) Analog Rebound Hammer Consisting of Test hammer Carrying case Grinding stone Operating instruction complete with all lead and lifts and as per the directions of Engineer in charge of the work No 2.00 150000.00 300000.00 Star rate not applicable
292 Concrete Pan Mixer Pan Type Capacity 40L complete with all lead and lifts and as per the directions of Engineer in charge of the work No 1.00 95000.00 95000.00 Star rate not applicable
293 Accelerated Curing Tank for 12 moulds of 150mm size complete with all lead and lifts and as per the directions of Engineer in charge of the work No 1.00 112000.00 112000.00 Star rate not applicable
294 VicaT Apparatus with ISI Certification Mark IS 5513 fitted in Aluminium Box complete with all lead and lifts and as per the directions of Engineer in charge of the work No 1.00 3500.00 3500.00 Star rate not applicable
295 Pace Control Digital Compression Testing Machine Capacity 2000kN with NABL calibration certificate complete with all lead and lifts and as per the directions of Engineer in charge of the work No 1.00 340000.00 340000.00 Star rate not applicable
296 Mould Steel for 70.6mm cube complete with all lead and lifts and as per the directions of Engineer in charge of the work No 12.00 780.00 9360.00 Star rate not applicable
297 Standard Sand Grade I complete with all lead and lifts and as per the directions of Engineer in charge of the work Bag 1.00 1750.00 1750.00 Star rate not applicable
298 Standard Sand Grade II complete with all lead and lifts and as per the directions of Engineer in charge of the work Bag 1.00 1750.00 1750.00 Star rate not applicable
299 Standard Sand Grade Ill complete with all lead and lifts and as per the directions of Engineer in charge of the work Bag 1.00 1750.00 1750.00 Star rate not applicable
300 Laboratory Electric Oven with Digital Indicator Cum Controller with Safety Alarm range 50deg to 250 deg C plus 1 deg C with Air Circulating Fan S.S. Inside Size 600 x 600 x 600mm complete with all lead and lifts and as per the directions of Engineer in charge of the work No 1.00 50000.00 50000.00 Star rate not applicable
301 Vibrating table 50 x 50cm for 4 moulds of 150mm cube complete with all lead and lifts and as per the directions of Engineer in charge of the work No 1.00 35000.00 35000.00 Star rate not applicable
302 Sieve Shaker Motorised with built in Digital Timer complete with all lead and lifts and as per the directions of Engineer in charge of the work No 1.00 25000.00 25000.00 Star rate not applicable
303 Domestic Use Micro Oven complete with all lead and lifts and as per the directions of Engineer in charge of the work No 1.00 12000.00 12000.00 Star rate not applicable
304 Compaction Mould 150mm ID 127.3mm height 2250ml volume complete with Collar and Base Plate made of Mild steel complete with all lead and lifts and as per the directions of Engineer in charge of the work No 2.00 3200.00 6400.00 Star rate not applicable
305 Rammer 4.9kg x 450mm controlled dropcomplete with all lead and lifts and as per the directions of Engineer in charge of the work No 2.00 2200.00 4400.00 Star rate not applicable
306 Compaction Mould 100mm ID 127.3mm height 1000ml volume complete with Collar and Base Plate made of Mild Steel complete with all lead and lifts and as per the directions of Engineer in charge of the work No 2.00 2500.00 5000.00 Star rate not applicable
307 Rammer 2.6kg x 310mm fall as per IS 9198 complete with all lead and lifts and as per the directions of Engineer in charge of the work No 2.00 2000.00 4000.00 Star rate not applicable
308 Gauging Trowel Ref. Standard IS 4031 100 to 150mm long blade with straight edge. Weight 210plus or minus10g complete with all lead and lifts and as per the directions of Engineer in charge of the work No 2.00 530.00 1060.00 Star rate not applicable
309 Gauging Trowel Ref.Standard IS 5515 200mm long blade Weight 210 plus10g complete with all lead and lifts and as per the directions of Engineer in charge of the work No 2.00 560.00 1120.00 Star rate not applicable
310 Universal Automatic Compactor with Mild Steel compaction mould as per IS supplied with AIM 11001 MS Compaction Mould 100mm ID 127.3mm height 1000ml volume complete with Collar and Base Plate made of Mild Steel and AIM 11101 MS Compaction Mould 150mm ID 127.3mm height 2250ml volume complete with Collar and Base Plate made of Mild steel complete with all lead and lifts and as per the directions of Engineer in charge of the work No 1.00 155000.00 155000.00 Star rate not applicable
311 Core Cutter apparatus supplied with 100mm dia Core Cutter Steel Dolly and Rammer – 1 No. each complete with all lead and lifts and as per the directions of Engineer in charge of the work No 5.00 2500.00 12500.00 Star rate not applicable
312 Tool kit which includes Spanners Cutting player Adjustable Wrenches Steel and Wooden Hammers complete with all lead and lifts and as per the directions of Engineer in charge of the work No 1.00 5500.00 5500.00 Star rate not applicable
313 Hose complete with all lead and lifts and as per the directions of Engineer in charge of the work No 2.00 800.00 1600.00 Star rate not applicable
314 Almirah complete with all lead and lifts and as per the directions of Engineer in charge of the work No 6.00 18000.00 108000.00 Star rate not applicable
315 Big knife complete with all lead and lifts and as per the directions of Engineer in charge of the work No 2.00 320.00 640.00 Star rate not applicable
316 Engine oil complete with all lead and lifts and as per the directions of Engineer in charge of the work L 1.00 550.00 550.00 Star rate not applicable
317 Cloth waste (10 kg) complete with all lead and lifts and as per the directions of Engineer in charge of the work Kg 1.00 300.00 300.00 Star rate not applicable
318 Tarpaulin 6ft x 6ft complete with all lead and lifts and as per the directions of Engineer in charge of the work No 2.00 650.00 1300.00 Star rate not applicable
319 Trovel (big) complete with all lead and lifts and as per the directions of Engineer in charge of the work No 2.00 350.00 700.00 Star rate not applicable
320 Trovel (big) complete with all lead and lifts and as per the directions of Engineer in charge of the work No 2.00 450.00 900.00 Star rate not applicable
321 Grease complete with all lead and lifts and as per the directions of Engineer in charge of the work kg 1.00 1000.00 1000.00 Star rate not applicable
322 Wheel Barrow complete with all lead and lifts and as per the directions of Engineer in charge of the work No 1.00 7500.00 7500.00 Star rate not applicable
323 Thermal Resistant Glouse complete with all lead and lifts and as per the directions of Engineer in charge of the work Pair 1.00 500.00 500.00 Star rate not applicable
324 Measurement Tape 5 15 30 and 50MTS complete with all lead and lifts and as per the directions of Engineer in charge of the work No 1.00 4500.00 4500.00 Star rate not applicable
325 HP Desktop G6 (Intelcore I5 Processor 8gb Dddr 4ram 128gb Solid State Drive 1tb Hard Disk Drive 6usb Ports 10 100 1000 Gigabit Port Multimedia Keyboard Optical Scroll Mouse Window 10 Preloaded 23.8" Hd Ips Hdmi Moniter K7 Mat Total Security With One Year Licence Validity complete with all lead and lifts and as per the directions of Engineer in charge of the work No 4.00 80000.00 320000.00 Star rate not applicable
326 Canon Image Class Mf465dw Monochrome Duplex Wireless Laser Printer All In One With Scanner Copier Fax Home Or Office Auto Document Feeder complete with all lead and lifts and as per the directions of Engineer in charge of the work No 1.00 70000.00 70000.00 Star rate not applicable
Grand Total 39827319.25 0.00 0.00
Executive Engineer,
M.I. & GWD Division, Mysore
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
MINERAL DISPATCH PERMIT.zip
Others - MINERAL DISPATCH PERMIT • 6.45 MB
HEBBALA BUILDING BID DOC VM.doc
Tender Document • 4.13 MB
STAR RATES GOVERNMEMNT ORDER.pdf
Others - STAR RATES GOVERNMEMNT ORDER • 2.18 MB
HEBBALA BUILDING PERT CHART 11 MONTHS CORR 10-04-2026.xls
Others - BAR / PERT CHART • 0.48 MB
GO AND TECHNICAL SANCTION.pdf
Others - GO AND TECHNICAL SANCTION • 4.11 MB
HEBBALA BUILD STAR RATES.xlsx
Others - STAR RATES STATEMENT • 0.07 MB
ROYALTY LATEST.pdf
Others - ROYALTY LATEST • 0.36 MB
GOVT NOTI LOC LETTER BY BANK.pdf
Others - GOVT NOTI LOC LETTER BY BANK • 1.72 MB
GO AND CIRCULARS RESTRICTION OF BIDDERS.pdf
Others - GO AND CIRCULARS RESTRICTION OF BIDDERS • 6.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .