Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹23.7 L
EMD Value
₹47,420
Closing Date
27 Nov 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
GE (U) WATER SUPPLY DELHI CANTT-10
GE (U) WATER SUPPLY DELHI CANTT-10
PROVN OF PIPELINE FROM SIGNAL GROUP PUMP HOUSE TO 325 LT AD OFFICE INCLUDING EXTRACTION OF WATER IN THE AOR OF AGE (U) W/S NO I UNDER GE (U) WATER SUPPLY DELHI CANTT-10
2026_MES_797644_1
GE/WS/Token No-68 OF 2026-27
Open Tender
Civil Works
Item Rate
180 days
GE (U) WATER SUPPLY DELHI CANTT-10
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE (U) WATER SUPPLY DELHI CANTT-10
₹47,420
Yes
6 Nov 2026
6 Nov 2026
30 Nov 2026
6 Nov 2026
27 Nov 2026
21 Nov 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Excavation in trenches not exc. 1.5 m wide and not exceeding 1.5 mtr deep for pipe line in any kind of soil getting out and levelling of bottom surface to required level complete all as specified and directed. | 250 | CUM | 23 | ₹5,750 |
| 2 | Returning filling in (soils), including spreading, leveling, watering and well ramming in layers not exc. 25 cm thick all as specified and directed by Eng. In Charge. | 205 | CUM | 22 | ₹4,510 |
| 3 | Removal of excavated material from site to a distance not exceeding 50 meters away and depositing where directed at a level not exceeding 1.5 meters above the starting point as directed by Engr-in-Charge. | 45 | CUM | 23 | ₹1,035 |
| 4 | Drilling not less than 300 mm bore hole by DTH method to any depth below the ground level in any kind of rock/soil upto 120 mtr deep including disposal of surplus soil to a distance not exc 50 mtr away all as specified and directed by Engineer-in-Charge.
Note : 1) In case of encountering rock prior to 30 mtr depth from ground level the decision of the Garrison Engineer for reboring shall be final and binding. Specific order in writing shall be issued by Garrison Engineer for reboring and the quantities shall vary accordingly. 2) cost of transportation of DTH plant is included in the unit rate. | 120 | RM | 24 | ₹2,880 |
| 5 | Supplying, lowering & fixing into bore 200mm dia MS casing pipe as IS-3589, 5.0 mm thick ERW having duly welded both sides socketed ends all as specified and directed by Engineer-in-Charge | 90 | RM | 27 | ₹2,430 |
| 6 | Supplying, lowering & fixing into bore hole 200 mm dia MS casing pipe, heavy duty as per IS 3589, 5.00 mm thick ERW slotted tube having 1000 slots of size 1.58 x 75 mm per mtr length uniformly distributed on surface, duly welded both side socketed ends all as specified and directed by Engineer-in-Charge | 30 | RM | 28 | ₹840 |
| 7 | Supplying & fixing well cap suitable for 200 mm bore well dia consisting of two parts complete with welding and machinery work having provison of cut out for passing of column pipe and fabricated from MS sheet 3.15 mm thick complete all as specified & directed by Engr-in-Charge. | 1 | EACH | 29 | ₹29 |
| 8 | Supply & fixing housing clamp for 200 mm dia bore pipe made out of flat MS 150x12 mm thick (length 80 mm) with 4 Nos 20 mm dia of suitable size of bolt, nuts, washers etc including drilling holes of suitable sizes and painting 2 coats of synthetic enamel paints over a coat of red oxide primer all as specified and directed by Engineer-in-Charge | 1 | SET OF TWO | 30 | ₹30 |
| 9 | Supply & fixing housing clamp for 50 mm dia bore pipe made out of flat MS 100x10 mm thick (suitable length) with 4 Nos 20 mm dia of suitable size of bolt, nuts, washers etc including drilling holes of suitable sizes and painting 2 coats of synthetic enamel paints over a coat of red oxide primer all as specified and directed by Engineer-in-Charge | 1 | SET OF TWO | 23 | ₹23 |
| 10 | Development of tube well with air compressor of rating 630 CFM at 100 PSI as required complete all as specified and directed by Engr-in-charge | 12 | PER HRS | 22 | ₹264 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.36 MB
tender.pdf
Tender Documents • 0.76 MB
BOQ_894764.xls
BOQ • 0.49 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .