Construction of Oxygen Plant Shed at CHC, Diglipur Building Portion Sw Providing IEI and EEI

Amount

Wiring for light point / Fan point / Exhaust Fan point / Call Bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch , modular plate , suitable GI box and earthing the point with 1.5 sqmm.FRLS PVC insulated copper conducotor single core cable etc. as required .

a) Group-C

Wiring for Light/ power plug wiring with 2 x 4 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed PVC conduit alongwith 1 No. 4 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for Circuit/ sub main Wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed PVC conduit as required.

2x1.5 sq.mm + 1x1.5 sq.mm. earth wire

4 x 6 sq. mm + 2 x 6 sq. mm earth wire.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but ecluding modular plate etc. as required.

Supplying and fixing metal box of 180mm x 100mm x 60mm, deep (nominal size) on surface or in recess with suitable size phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15 / 16 amps socket outlet and 15 / 16 A piano type switch,connection, painting etc. as required.

Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box / wooden block including connection etc as required.

Installation, testing and commissioning of wall barcket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.

Installation, Testing and Commissioning of Ceiling Fan, including wiring the down rod of standard length (up to 30 cm) with 1.5 sq.mm FRLS PVC insulated copper conductor, single core cable etc as required.

Installation of exhaust fan in the existing opening, including making good the damage, connections, testing, commissioning etc. as required.

a) Upto 450 mm

Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board , 415 volts, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnection , powder painted including, earthing etc as required. (But without MCB/RCCB/Isolator)

a) 6 way( 4 + 18), Double door.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA 'C' curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

a) Single pole

b) Single pole and neutral

Supplying and fixing following rating , double pole , 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Providng and fixing 25mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connections with brass nut , bolt, spring, washer excavation and refilling etc. as required.

Providing and fixing of 4mm diameter copper wire on surface or in recess for loop earthing along with the existing surface recesses conduit/ submain wiring/ cable etc. as required.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1.KV grade of following size in the existing RCC/ HUME/METAL pipe as required.

a) Upto 35 sq.mm

b) Above 95 sq.mm and upto 185 sq.mm

Supplying and fixing of light class G.I. pipe of 100 mm dia(nominal) 3 metres length along the pole for protection of under ground cable as required.

Supplyingh and laying of following size DWC HDPE pipe ISI marked alomg with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. complete as required.

a) 63 mm dia (OD-63 mm & ID-51 mm nominal)

b) 90 mmdia (OD-90 mm & ID-76 mm nominal)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

a) 2 x 6 sq.mm (19 mm)

b) 3.5 x 35 sq.mm (35 mm)

b) 3.5 x 120 sq.mm (45 mm)

Supplying and fixing of light class G.I. pipe of 100 mm dia(nominal) 3 metres length along the pole for protection of under ground cable as required.

Supplying and fixing following sizes of conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of ressed conduit as required.

Providing, laying and fixing following dia G.I. pipe ( medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and re-filling etc. as required.

b) 100 mm dia

Supply of following LED light fittings1200mm length,Power factor not less than 0.9, suitable for 230 Volts,50 Hz AC supply similar to Havells E-LITE LED PRIDE PLUS NEO etc. or its equivalent to IS specification.

a) 20 W LED 6500K

Supplying of following rating surface decorative wall / ceiling mounted LED Bulk head fittings similar to Havells Hexa , LED IP66, or Crompton/ Bajaj/ Philips or its equivalent to IS specification.

a) 10 W LED, 6000 K

Supplying of energy efficiency BLDC ceiling fan of white in colour without remote and regulator of following sweep, suitable for operation on 230 Volts, single phase, 50 Hz, AC Supply including 30 cm long down rod etc. as required.Similar to HAVELLS Efficiencia Neo or its equivalent to IS specification.

a) 1200 mm sweep, white colour

Supplying of exhaust fan of following sweep, suitable for operation on 230 V, single phase, 50 Hz, AC supply including suitable size louvers etc. as required. Similar to Havells Ventil Air -DB or Bajaj etc or equivalent to IS specifications.

Supplying and fixing of following pole and rating, 240/415 V, 10 kA 'C' curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

a) SP MCB 0.5 A to 5 A , 10 KA capacity.Similar to Havells Cat. No.DHMGCSPF0x5-005.

Supply of following size ISI marked PVC sheathed/ XLPE armoured aluminium conductor cable of 1.1 KV grade as required.

a) 2 core x 6 sq.mm

b) 3.5 core x 35 sq.mm

c) 3.5 core x 120 sq.mm

Supply and fixing of following rating Heavy duty double break HBC type triple pole & neutral fuse switchs in sheet steel enclosure including connection etc as required.

Supplying and fixing of On Load Manual Change Over switch in Sheet Steel Enclosure of following current rating of 415 V, 50 Hz and Conforms to IEC 60947-3 , IS/IEC 60947-3) including connection etc as required. Similar to L&T Cat No. CO21600OSOO.

Supplying and fixing of Wall Mounted Busbar chamber of following capacity and way in sheet enclosure, 415 V, 50 Hz including connection etc as required.

Supplying and fixing of Energy saving, environmental friendly & robust IP65 protected LED Lowbay with PDC housing suitable for ceiling (Surface/Suspended) mount & available in Wide beam optics. Equivalent to LUKER lowbay commercial indoor light(LHBYC40) etc as required

Supplying, installation, testing and commissioning of safe earthing electro type-19, 50mm dia, length 2 mtrs (short time current -52.6 rms for 1 sec, peak-125.6) with back fill compound and providing masonary enclosure with cover plate having locking arrangements etc. as required. Make ASHLOK SEE brand or its equivalent to IS specification.

Providing and fixing hot press moulded sintex three phase SMC Meter Box double door of following size for accommodating one LT 3 phase KWh meter, with FP 40A C-curve MCB, 415 V and viewing window for MCB, similar to Sintex Cat No. GSMB-5628 etc as required.

a) SMC double door meter box of size 505x240x150 mm

AKABEA INFRASTRUCTURES PRIVATE LIMITED

JAYANTA KUMAR BISWAS