SPECIAL REPAIR TO BLDG NO P-7 AND P-7C-1 (TOILET BLOCK) UNDER GE(WEST) COLABA, MUMBAI

Amount

(A) Schedule A Part- I (B/R PORTION) Dismantling Mangalore patteren or similar tiles in roofing including portions bedded in cement mortar complete all as specified and directed.

Dismantling roof battens of any description in any position complete all as specified and directed.

M & L pre-painted roof tiles of metal sheet of Mangalore tile design profile hot-dip aluminium-zinc alloy metallic coated profile steel sheet as per IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.50 mm thick of a colour having yield strength of 550 Mpa as in roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed.

Supply & fix Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 MPA as in roof coverings /claddings to wall, fixed with self tapping screws including scafoldings of any hieght complete all as specified and directed. Make for Item No. 3 & 4- (i) TATA (ii) JSW (iii) ESSAR (iv) HINDALCO (v) INDALCO (vi) ASSOCIATED PROFILES AND ALUMINIUM LT

S&F for mild steel work medium weight of any dia of pipe square/round/ rectangular or MS Flats including fabrication and errection complete in purlins and rafter fixed to existing wooden trusses for making arrangemnt to receive self tapping screws of roof sheeting confirming to IS 1161-1979 grade St-240 complete all as specified.

Material and labour in repair to replace old decayed timber( including piecing, scarifying, etc of old and new timber if required) second class hard wood clean sawn in scantlings timber framed and fixed in any position and description including scafoldings of any hieght complete all as specified and directed.

Supplied and fixed in repairs to replace old or decayed boarding in patches including cutting out old,piecing, heading joints etc 20 mm thick second class hardwood clean sawn boarding fixed with nails with butt joints in any situation including scafoldings of any hieght complete all as specified and directed.

Fixing only in repairs in patches including cutting out old,piecing,heading joints etc 20 mm thick second class hardwood clean sawn boarding fixed with nails with butt joints in any situation including scafoldings of any hieght complete all as specified and directed.

M&L for preparation of new wood or wood based surfaces, of any description, not otherwise described over 10 cm width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of old painted wood or wood based surfaces, of any description, not otherwise described over 10 cm width or girth and apply one coat of synthetic enamel paint complete . Make for Item No. 9 & 10-(a) LUXOL (Berger paint) (b) BROLAC (Johnson & Nicholson) (c) SUPERLAC (Shalimar Paints) (d) NEROLAC (Goodlass Nerolac) (e) APCOLITE (Asian Paints)

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)

S & F of UPVC rain water gutter having an size of 150mm and thickness of 8 mm and fixed at walls/wood with help of MS bracket at spacing of 1000mm, incl all fittings at any height and inclusive of scaffolding complete all as specified and directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and rubbish off the primises complete all as directed.

M&L light shade vitrified coloured Ceramic tiles 10 mm thick (Square/rectangular) polished area of each tile not exceeding 0.36 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match inluding Screed bed or bedding layer of mortar 15 mm thick in (1:6) for laying floor finishes complete all as specified.

M&L light shade vitrified coloured Ceramic tiles 10 mm thick (Square/rectangular) polished area of each tile not exceeding 0.36 sqm in vertical surfaces such as skirtings and dados set and jointed in neat cement slurry and pointed in white or coloured cement to match over rendering 10 mm thick on fair faces of brick work in CM (1:4) complete all as specified.

M&L Non Skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for digital coloured glazed ceramic tiles 300x450x7mm thick in vertical surfaces (including designed borders ) such as skirting and dados set and jointed in neat cement slurry pointed in coloured cement to match over rendering 10 mm thick on fair faces of brick work in CM (1:4) complete all as specified and directed. Note:- (Rate of Designer border in vertical surface will be deemed into quoted rates) Make for Item No. 14 to 17: M/s H R Johnson/M/s Orient Bell Tiles/M/s Kajaria/M/s Somany Tiles Ltd/M/s Nitco tiles/M/s Swastik Tiles

Demolition of stone slabs and tiles of any description or thickness in floors, aprons,dados etc laid, bedded and pointed in any mortar and removal of rubbish off the site complete all as specified & directed.

M&L for machine cut kota stone slab flooring 20-25 mm thick over cement screed bese laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to mirror finish inluding Screed bed or bedding layer of mortar 15 mm thick in (1:6) for laying floor finishes complete all as specified and directed.

Ditto all as per Item above but in riser of steps, skirting, dado, window cill and pillar laid over cement screed and jointed over rendering 10 mm thick on fair faces of brick work in CM (1:4) complete all as specified and directed.

M&L for granite (of any colour) 20 mm thick machine cut, pre polished, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone as in window cill/kitchen platform, flooring and all other similar works complete all as specified and directed.

Grinding/rubbing to kota stone surfaces to mirror finish complete all as specified and directed.

Dismantling of Brick work or stone/boulder masonry built cement mortar or cement lime mortar all as specified.

M&L Brickwork with sub class `B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar1:6all as specified and directed.

Taking down cement plaster of any description from brick wall surfaces etc including racking out joints and hacking for key, scrubbing down with water etc complete all as directed.

Material and labour for 15 mm thick cement plaster in CM (1:6) on brick work/ RCC wall and finish the surface fair and even without using extra cement complete all as specified and directed.

M&L Rendering 15mm thick in cement mortar 1:4 using intergral water proofing compound on fair faces of brick work to be finished even and smooth(with out using extra cement. complete all as specified and directed. Note: Integral liquid water proofing compound to be used in per bag of cement shall be as per manufacturers instructions and paid separately under respective items.)

Supply only integral waterproofing compound Make - Plastocrete of Sika/Pidiproof LW of Pidilite.

M&L for rendering 5mm thick on fair faces of ceiling / chajja concrete surfaces in cement mortar 1:3 complete all as specified & directed.

M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper over a coat of alkali resistant priming paint over 1mm thick (average) wall putty all as specified.

Materials and labour for complete removal of existing treatment and applying two coats of oil bound distemper over a coat of alkali resistant priming paint over 1mm thick (average) wall putty all as specified. Make for Item No. 30 & 31: SHALIMAR / BERGER / NEROLAC / ICI LTD/ASIAN (Tractor UNO)

M&L for preparation of newly plastered surfaces and applying two coats of 100% exterior grade acrylic paint (wheather proof paint) over one coat of primer complete all as per manfacturer,s specifications and directed.

M&L for preparation of Old plastered surfaces and applying two coats of 100% exterior grade acrylic paint (wheather proof paint) complete all as per manfacturer,s specifications and directed. Make for Item No. 32 & 33: Asian Paints Ultima Protek or equivalent of Berger Paints ( Weather Coat All Guard) / Nerolac (Excel Top Guard) / Dulux Paints ( Dulux Weather shield Max) as approved by GE.

M&L for prepartion of newly plastered ceiling surfaces and applying three coat of white wash complete all as specified and directed.

Cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles

M & L for preparation of old painted steel surfaces using blower/steamer to remove the old paint, of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint complete all as directed.

M & L for preparation of new steel surfaces of any description over 10 cm width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide, zinc primer eyc.complete all as directed. Make for Item No. 36 & 37-(a) LUXOL (Berger paint) (b) BROLAC (Johnson & Nicholson) (c) SUPERLAC (Shalimar Paints) (d) NEROLAC (Goodlass Nerolac) (e) APCOLITE (Asian Paints)

M & L for cleaning surface of old stone walls using water jet & caustic soda & preparing wall surfaces & applying two coats of stone Varnish at any height complete all as specified & directed.

Taking down Chowkhats or frames with shutters (without taking of shutters from the frame) exc 1.50 n exc. 4.00 Sqm each complete all as specified and directed.

Taking down Chowkhats or frames with shutters (without taking of shutters from the frame) n exc. 1.50 Sqm each complete all as specified and directed.

Taking down shutters of any description exc. 1.00 Sqm n exc 2.00 Sqm complete all as spcified and directed.

Supply & fix for 2nd class hard wood plain solid straight chowkhat and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joint complete all as specified and directed.

S & F mild steel flat iron as in hold fast clamps articles conforming to FE 410 -O or FE 310-O complete all as specified and directed.

M&L PCC 1:3:6 type C1(20 mm graded aggregate) as in bed blocks for hold fast and all other similar works including necesssary formwork complete all as specified and directed.

Material and labour for preparation of wood and wood based materials, new or old, of any description and girth, not otherwise described, and treating ends of posts,back of chowkhats,etc. area tarred exc 0.1 sq m but n. exc. 0.5 sq m each and treated with tar or coal tar black paint complete all as specified and directed.

Material and labour for preparation of wood and wood based materials, new or old, of any description and girth, not otherwise described, treating small articles such as holdfasts,end of posts,backs of chowkhats, etc area n. exc. 0.1 sq m each and treated with tar or coal tar black paint complete all as specified and directed.

Supply & fix 35 mm thick 2nd hard wood rail and style plain framed panelled shutters(any panel) with lock rail and panel of 9 mm thick B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS 1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and directed.

Supplied and fitted to chowkhats of 2nd class hard wood 35mm thick Glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc(without sash bars) edges of framing plain, chamfered or rounded, fittted with cut and mitred beads for securing gauge,etc sizes of member of shutter as specified SSR part-I Section 8 clause 8.24 (a) complete all as specified and directed.

Supply & fix 30 mm thick flush shutter, solid core construction,with block board core and plywood face panel, commercial type on both sides complete all as specified and directed.

Taking down chowkhats n exc 1.50 sqm each without taking off shutter from chowkhat each complete all as specified and directed.

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm single piece extruded PVC profiles reinforced with 19 x 19mm MS square tube provided with EPDM rubber gasket weather seal through out the frame and the profile mitre cut at two corners and joined by inserting 2 nos 150mm long brackets of 15 x 15mm MS square tube inside 19 x 19mm MS square tube suitably screwed complete all as specified.

Supply & fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes of size 15 x 15mm for top and bottom rails and 19 x 19mm for stiles, MS frame covered with 5mm thick single piece extruded PVC profile 'C' channel having a 5mm thick PVC sheet strip of 20mm width struck inside with solvent cement, forming stiles, and 5mm thick single piece extruded PVC profile for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail; panelling of 5mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with PVC sheet beading, and joined together with solvent cement adhesive etc all as per manufacturer's instructions and drawings as shown in SSR Part-I 2009 complete all as specified. Make for item No. 52 & 53: M/S Rajshri Plastiwood, Indore/M/S Sintex Industries Ltd/M/S Accucell/M/S Dura Plast Extrusion complete all as specified and directed by Engineer in charge.

Supply & fix mild steel 300 mm, ordinary rat tail rod pattern springs, including roler and roller plate complete all as specified and directed.

Supply & fix 300mm long Brass, sliding door bolt with sand or die-cast brass hasp, staplee (bolt type) and fixing bolt with rolled of drawn brass bolts and fixed complete all as specified and directed.

Material and labour for floor door stopper of aluminium alloy body and tongue, anodised , with hard drawn steel spring overall length of cover plate 140 mm, complete all as specified and directed.

S&F aluminium anodised 200 mm barrel tower bolts of extruded section complete all as specified and directed.

S&F aluminium handle 150 mm cast type anodised

S&F 100 mm butt hinges extruded aluminium alloy with galvanized mild steel hinges pin anodised type `C'-22 complete all as specified and directed.

S&F in repair 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed. Make for Item No. 53 to 59 : Classic/ Shalimar/ CLIF/ARGET

Resecuring or easing & adjusting, without taking down shutters of any description exc 1.00 sqm but not exc 2.00 sqm complete all as specified and directed.

S & F powder coated (any Colour) aluminium sections for doors, windows, ventilators, door, partition including fabrication of frame shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement, powder coating of any colour as directed by Engr-In- Charge etc. including all accessories such as glazings clips, etc.complete all as specified. Make : Hindalco/Indal (Indian Al Coy)/Jindal/Associated Profile & Aluminium Ltd/Ajit India Note : (i) Glass panes will be measured & paid separately . (ii)The quoted rate shall be inclusive of cost of rubber beading and glazing clips. However it will be not be weighed and not paid separately. (iii) All other minor details including cost of locking arrangement shall be included in the quoted rate.

Supply & fix sheet glass, ordinary quality, 5.5 mm thick and glazed with oil putty or fixed with rubber beading in square not exceeding 0.5 Sqm in each pane complete all as specified and directed.

Supply & fix 3 mm thick sheet glass ordinary quality with oil putty in square n. exc. 0.5m in each pane complete all as specified and directed. Make for Item No. 62 & 63 -(a) Saint Gobin (b) Asahi (c) Atul Glass Industries (iv) GOld unserviceableen Fish (v) Modi Guard (vi)Hindustan Pilkington Glass

S&F of aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified and directed.

Supply and fixing 20mm dia decorative type curtain rods chromium plated anodised aluminium complete all as specified and directed.

Supply and fixing 20mm dia decorative type fancy type brackets made of brass complete all as specified and directed

Taking up or down steel tubing and connection including cleaning for refixing or removed to store,15 mm dia bore complete all as specified and directed

Fixing only old 15 mm steel tubing and including cleaning in positon (walls, ceiling and floor etc complete all as specified and directed

S & F GI tubing 15mm bore medium grade medium grde with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed Make- (a) Tata (b) Swastik (c) Jindal (d) Surya (e) Prakash (f) Indian Tube Company (g) Zenith (h) BST (j) GST (Gujrat Steel Tube)

Cutting chases, pinning in making good to facing on brick walls where required and pointing in cement mortar (1:3) to ends for concealed water tubing and making good ,cutting n, exc. 10cm girth complete all as specified and directed.

S&F in repair vitreous China wash down water closet pan (pedestal pattern) white,incl. trap, connection to drain and flushing pipe including seat cover for pedstal pan complete.

S&F in repair vitreous China wash basin white, flat back,size 580X450 mm including cutting for pinning in ends of brackets,complete.

S & F in for vitreous china, bowl urinal flat back, size : 465 x 355 x 265mm white (min) with union and grating for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) incl. providing anf fixing plugs, securing urinal to plugs with and incl, 60 mm long brass screws, pointing around urinal back in cement mortar 1:2 (excl fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed) Make for Item no 71 to 73: Neycer Kermag (Standard)/Hindustan Sanitary Ware Industries (Ist Quality)/Parryware (Super Fine)/Cera(Ist Quality)/Jaquar

Supply & Fixing in repair vitreous China squatting pan, ' Orissa patteren, size 580 x 440 mm white, with integral footrests (excluding flushing cisteren and flush pipe) complete all as specified and directed. Make : Cat Part No S3010104 of Cera or Equivalent in Hindware / Parryware.

S&F in repairs 10 litre capacity PVC low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size complete all as specified and directed. Make:Commander/ Hindware/ Paryware/ CERA.

S&F as in repair 15 mm bore fancy type angular valve cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. Make:- ESS ESS CROMA Cat Part No C 204 or Equivalent of JAQUAR/PARKO

S & F in repair 15 mm bore fancy type concealed stop cock (regular body) cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions . Make:- ESS ESS CROMA Cat Part No C 206 or Equivalent of JAQUAR/PARKO

S & F in urinals spreader of PTMT any colour for fixing with 15 mm dia pipe (minimum wt 60 gms) fixed inposition complete all as specified and as directed.

S&F as in repair grating square 150mm size of PTMT(minimum 100 gms) complete all as specified. Make for Item No. 78 & 79- (i)Jaypee (ii) GMP (iii) Neta (iv) Zolota (v) Prayag polimer (vi) Symet

S&F PVC connection 15mm size PTMT nuts of length 450 mm.complete all as specified and directed.

S&F as in repair 15 mm bore fancy type bib taps long body cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule.complete all as specified and directed. Make:- ESS ESS CROMA Cat Part No C 202B or Equivalent of JAQUAR/PARKO

M&L in repair for 15 mm bore fancy type wall mixer with 115 mm long bend pipe for connection to overhead shower(with bush and piston Divertor fittings) with aerator complete all as specified and directed.. Make:- ESS ESS CROMA Cat Part No C 216 or Equivalent of JAQUAR/PARKO

M&L in repair 15 mm bore fancy type health faucet with SS hose complete all as specified. Make:- ESS ESS CROMA Cat Part No C 232D or Equivalent of JAQUAR/PARKO

M&L in repair fancy type CP Towel Rail 61 cm long complete all as specified and directed.

M&L in repair CP Towel Ring all as per cat Part.complete all as specified and directed.

M&L in repair CP soap dish all as per cat part.complete all as specified and directed.

M&L in repair CP toilet paper holder all as per cat part.complete all as specified and directed.

S&F in repairs sheet glass corner shelf assembly consisting of 5.5 mm thick sheet galss shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

S&F in repair 15 mm bore piller taps cast copper alloy,with capstan heads,chromium plated,screwed down, fancy type high pressure, with or without lettred 'HOT or COLD' with long screwed sunk and fly nuts. Make:- ESS ESS CROMA Cat Part No C 201 or Equivalent of JAQUAR/PARKO

Supply and fixing in repair 15 mm bore overhead shower single flow (ABS body chrome plated with grey face plate) with rubit cleaning system including shower arm 240 mm long(light weight) round shape with wall flange complete all as specified & directed. Make:- ESS ESS CROMA Cat Part Not T 134 or Equivalent of JAQUAR/PARKO

Supplied and fixed for 75 mm bore PVC pipe stack clamps out of 50 mm x 5 mm flat iron and 16 mm dia round iron stays,including bolts and nuts and securing ends of stay to wall or roof including scafolding to work at any hieght complete all as specified and directed.

Supplied and fixed for 100/110 mm bore PVC pipe stack clamps out of 50 mm x 5 mm flat iron and 16 mm dia round iron stays,including bolts and nuts and securing ends of stay to wall or roof complete all as specified and directed.

S&F in Repair 110 mm dia PVC(SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes and fixed to walls upto 04 storeys including all scafloding arrangments complete all as specified and directed.

S&F in Repair 75 mm dia PVC(SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes and fixed to walls 04 storeys including all scafloding arrangments complete all as specified and directed.

S&F 75mm dia PVC (SWR) bends with access doors any radius at any hieght including scafolding complete all as specified and directed.

S&F 110 mm dia PVC (SWR) bends with access doors any radius at any hieght including scafolding complete all as specified and directed..

S&F 75 mm dia PVC (SWR) junction single, (single T) equal or uequal provided with access door at any hieght including scafolding complete all as specified and directed.

S&F 75 mm dia PVC (SWR) vent cowl at any hieght including scafolding complete all as specified and directed.

S&F 110 mm dia PVC (SWR) vent cowl at any hieght including scafolding complete all as specified and directed.

M&L in repair 75 mm dia PVC(SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and directed. Make for Item No. 94 to 101 : Prince/Finolex/Supreme/HIL Limited (Birla Aircon)/Astral

Demolition of cement concrete in ground floor n.exc 15cm thickness (below or above ground level) and removing the demolished material and debris out side MD land.complete all as specified and directed.

M&L 75 mm PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in plinth protection including necessary complete all as specified and directed.

(B) Schedule A Part- II (E/M PORTION) Taking down carefully copper/aluminum submain wiring complete including all fixtures such as switches, bulk head fittings, building security light fittings, plug socket boxes etc and removing unserviceable materials from site of work and making good disturbed surfaces of walls, floors with cement mortar and white/colour wash to match with existing surfaces etc complete all as specified and directed

S&F Sub main wiring with four run of 16 sq mm stranded copper conductor PVC unseathed FRLSH wire along with 16 sq mm green colour wire as earth contuinity conductor connected to common earth dolly including PVC FR heavy duty conduite of adequate size (not less than 32 mm dia) for housing the wires for from Pannel / Main TPN DB to Sub TPN DB complete all as specified & as directed by engr-in-charge. Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. Note: Mode of measurement four runs of 16 sqmm cable and one run of 16 sqmm cable with PVC conduite shall be measured as one length.

S&F Sub main wiring with two run of 10 sq mm stranded copper conductor PVC unseathed FRLSH wire along with 10 sq mm green colour wire as earth contuinity conductor connected to common earth dolly including PVC FR heavy duty conduite of adequate size (not less than 32 mm dia) for housing the wires for from Main TPN DB to house SPN DB complete all as specified & as directed by engr-in-charge. Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. Note: Mode of measurement two runs of 10 sqmm cable and one run of 10 sqmm cable with PVC conduite shall be measured as one length.

S&F Sub main wiring with two run of 4 sq mm stranded copper conductor PVC unseathed FRLSH wire along with 4 sq mm green colour wire as earth contuinity conductor connected to common earth dolly including PVC casing caping of adequate size (not less than 25 mm dia) for housing the wires for from Main DB to house SPN DB complete all as specified & as directed by engr-in-charge. Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. Note: Mode of measurement two runs of 4 sqmm cable and one run of 4 sqmm cable with PVC conduite shall be measured as one length. Make for Item No. 105 to 107- Make for Cable :Havells/Finolex/ Nicco/Plaza/ Anchor/ Polycab/ RPG/ GLOSTER/ RR Kabel/ KEI Make for PVC Conduit : (i) Anchor (ii) Modi (iii) Pressfit (iv) Precision (v) Astral

Taking down carefully copper/aluminum wiring (Light point, fan pt, 5 Amp socket point and poer point) complete including all fixtures such as switches, bulk head fittings, building security light fittings, plug socket boxes etc and removing unserviceable materials from site of work and making good disturbed surfaces of walls, floors with cement mortar and white/colour wash to match with existing surfaces etc complete all as specified and directed

Material and labour for point wiring and including rigid non-metallic PVC casing capping, 19/ 20 mm dia suitable size, cutting chases for sinking for concealed boxes for wiring with 1.5 sqmm FRLSH PVC insulated, unsheathed, multi stranded copper conductor cable single core, 1100 volts grade with flush type metal boxes suitable for fixing switches, sockets and fan regulator etc., white or any colour cover plate with brass screws and cup washers including PVC insulated unsheathed multi stranded copper conductor cable of 1.5 sqmm as an earth wire connected to common earth and earth dolly as per IS specification and as specified in SSR Part-I complete for one light point controlled by one switch.

Ditto all as per item No.109 but One ceiling fan controlled by one switch & regulator

Ditto all as per item No.109 but One Exhaust fan / Wall fan controlled by one switch.

Ditto all as per item No.109 but One 3 pin socket point 5 Amps on independent board

Ditto all as per item No 109 but One 3 pin socket point 5 Amps on same board

Ditto all as per srl item No 109 here-in-before but for one socket point 15 Amp with 2.5 sq mm PVC unseathed FRLSH wire along with 2.5 sq mm green colour wire as earth contuinity conductor connected to common earth dolly complete all as specified & as directed by engr-in-charge. Make for Item No. 109 to 114- Make for Cable :Havells/Finolex/ Nicco/Plaza/ Anchor/ Polycab/ RPG/ GLOSTER/ RR Kabel/ KEI Make for PVC Conduit : (i) Anchor (ii) Modi (iii) Pressfit (iv) Precision (v) Astral

S&F Switch piano, in repair, flush type single pole, one way 5 Amp Make: Anchor,Fine,SSK

S&F socket 2/3 pin 5 Amp .

S&F socket 6/16 A 2/3 pin .

S&F Switch piano, flush type single pole, one way 15 Amp

S & F stepped type electronic fan regulator in repair, 450 watt flush type on the existing phenolic laminated sheet etc.

Supply & Fix ceiling rose in repair, surface bakelite 65 x 50 mm two to three terminals complete all as specified and as directed. Make for Item No. 115 to 120- (a) Anchor Roma (b) Legrand (c) Crabtree (d) Havells (e) Indo Asian (f) Polycab

Supply and fix surface mounted 10 watts, 6500K, LED tube light fitting in repair, mirror light fitting with lamp fixed including on pvc square for mounting the fittings and electrically connecting with three single core 23/0.0076. PVC insulated multi strandard copper flexible cable from ceiling rose to light fitting (connector block of lamp fitting) and one for earthing complete all as specified and directed Make:- Wipro, Model No : Wipro Garnet 10W LED Batten 6500K or in equivalent model in Havells cat pat No LUMILINEB59W LED830SPCWH / Philips model no BN021LED10S-2ft. / OSRAM

Supply and Fix 20 watt LED, 6500 K, in repair, 4 feet long fixed including on pvc square for mounting the fittings and electrically connecting with three single core 23/0.0076. PVC insulated multi strandard copper flexible cable from ceiling rose to light fitting (connector block of lamp fitting) and one for earthing complete all as specified and directed Make:Havells cat pt no LHEXBXPNIN1W020 equivalent model in Wipro model no - Wipro Garnet 20 W LED Batten 6500K / Philips model No - BN150W LED 20S-6500 PSE ODGR / OSRAM.

Supply and fix LED 36 Watt fitting in repair, minimum 110 Lumin per Watt, recessed mounted, full glow, slim type, of size 60 cm x 60 cm square type, with electronic driver of same make connecting cable three core PVC insulated and PVC sheathed copper flexible cable of size 16/0 20mm and necessary fixing arrangement complete all as directed. Make - Havells (Cat part No - ENDURASLIMPROPLUS2X2 PLR36WLED840MOD) or equivalent model of Wipro Model No LM25-361-XXX-65-G1** / Philips Model No - RC380BLED 34S-6500 L60W60PSDOD-51

Supply and fixing in repair LED building security light fitting 45 Watt, luminaire fixture in IP 66 protection level output of LED lamp efficiency minium 100 luman per watt after all losses , pressure die-cast aluminium housing LED Street light complete with GI clamp including connected accessories and bracket made of GI Pipe 50mm dia light grade 1.25 m long, bend to shape with two sets of MS flat iron clamps, nuts, bolts, washers etc. complete all as directed by Engineer-in-Charge. Make Philips : cat pat No BRP409 LED060HENRPC S1PSU GR or equivalent in Wipro cat part No LR02-501-XXX-57-XX / Havells cat part No ENDURACITYLINERNEXGENSL 45WLED757 SASYBOPC.

Supply and fix / lay cable in repair PVC insulated screened PVC bedded, unarmoured, sheathed, electric power cables 1100 volts grade with stranded copper conductor of size 2.5 Sqmm 3 core with and including non metalic PVC FR, heavy duty conduit of suitable size (20mm dia or more), with shaddle complete all specified and directed Note: Mode of measurement 2.5 Sqmm 3 core cable with PVC conduite shall be measured as one length. Make of Cable :(i) Havells (ii) Finolex (iii) Nicco (iv) Plaza (v) Anchor (vi) Polycab (vii) RPG (viii) GLOSTER (ix) RR Kabel(x) KEI Make for PVC Conduit : (i) Anchor (ii) Modi (iii) Presfit (iv) Precision (v) Astral

S&F in single pole and neutral enclosure in repair, with a two pin and earth plug and socket 20 Amp complete with one single pole MCB.

S&F DB vertical type 4 way TPN in repair, doubble door load line powder coated complete alongwith 200 Amp rated Bus bar fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection complete all as specified and directed. . Note: Thimble/lugs of rating of MCCB should be used with wire for fixing in the MCB

Supply and fix MCB TPN in repair, 35 to 60 amps, 'C' series, breaking capacity 10 KA, 'C' curve 240 volts, 50Hz including necessary incoming and outgoing electric connection with suitable size of copper lugs etc., complete all as directed.

Supply and fix MCCB 160 Amp, 4 pole, 415 V, Adjustable type, with breaking capacity 36 KA complete all as directed.

Supply and fix MCCB 100 Amp, 4 pole, 415 V, Adjustable type, with breaking capacity 36 KA complete all as directed.

Supply and fix sheet metal enclosures in repair, double door, for DBs when MCBs to be used 240 volts 12 way with 200 Amps rated bus bar single pole and neutral fixed on wall by cutting chasing and making good to the disturbed surfaced board in and including copper lugs/thimbles duly crimped for connection complete all as specified and directed.

Supply and fix sheet metal enclosures in repair, double door, for DBs when MCBs to be used 240 volts 8 way with 200 Amps rated bus bar single pole and neutral fixed on wall by cutting chasing and making good to the disturbed surfaced board in and including copper lugs/thimbles duly crimped for connection complete all as specified and directed.

Supply and fix MCB SP in repair, 240 volt, 6 to 32 Amps, C series, complete all as specified and directed. Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB

Supply and fix MCB SPN in repair, 240 volt, 40 to 63 Amps, C series, complete all as specified and directed. Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB Make for Item No. 126 to 134: (i) Larsen & Tubro (ii) Siemens (iii) Schneider (iv) ABB (v) Havells (vi) Legrand (vii) Indo ASIAN (viii) C & S Electric

Material & labour for earthing in repair, complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to using galvanised iron wire 4 mm dia as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron. Earth strip protected by GI pipe of size 40mm bore(medium grade) and connected to main switch board or main control board as directed and as specified and shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm C/C with one handle for lifting made out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing complete all as directed by Engineer-in-Charge.

BOB ENTERPRISES

SHREE JAGDISH FURNITURE CO.

Shetty Construction Co

Vandan Enterprises

AGRAWAL ASSOCIATES