COMPREHENSIVE REPAIRS TO CIVIL WORKS OF A BLOCK AT GHATKOPER UNDER GE NORTH MUMBAI

Amount

Demolition of brick work/stone masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, PCC coping etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing of debris outside MD land complete all as specified and as directed by Engineer-in-Charge.

Material and labour for brick work with sub class 'B' bricks straight or curved on plan exceeding 6 mtr mean radius with old size bricks and built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge

Material and labour for brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge.

Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) including chequered tiles and removal of rubbish to outside MD land etc complete all as specified and as per directed all as specified and as per directed

Material and labour for providing Anti-termite Treatment Treating to the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and as directed by Engineer-in-Charge.

Material and labour for providing Anti-termite Treatment Treating at point of contact of wood work by chemical emulsion @ 0.5 litre per per hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for providing Anti-termite Treatment Treating along the wall of junction of floors using chemical emulsion @ 0.75 litre per per hole at the interval of 300mm including drilling and plugging 12mm dia holes with cement mortar 1:2 to match the existing floors etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for hardcore of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface all as specified and as directed.

Material and labour for 75mm thick Plain Cement Concrete 1:4:8 type D2, using 40mm graded stone aggregate as in sub base of flooring / hard standing / path, finished even and fair all as specified and as directed by Engineer-in-Charge.

Taking down shutter carefully, area exceeding 1.0 sqm but not exceeding 2.0 sqm each including all fittings all as specified and as directed by Engineer-in-Charge

Taking down of chowkats or frames not exceeding 1.5sqm each with shutters (without taking off shutters from the frames) complete all as specified and as directed by Engineer-in-Charge.

Taking down of chowkats or frames exceeding 1.5sqm but not exceeding 4.0sqm each with shutters (with out taking off shutters from the frames) complete all as specified and as directed by Engineer-in-Charge.

Supply and fix plain solid straight chowkats, second class hardwood, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints including making good in cement concrete in frame complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 35mm thick factory made plain framed panelled shutter 2nd class hardwood rail and style (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and as directed by Engineer-in-Charge. Make : M/s Goel Brothers, Raipur / M/s Pioneer Timber, Chandigarh / M/s Goyal Industries, New Delhi / M/s Jain Doors pvt Ltd, Haryana / M/s India Wood & Wood Pdts, Mangalore / M/s MP Wood Products, Indore / M/s A1 Teak Products, Indore / M/s Jain Wood industries( Brand : JAYNA)

Supply and fix 35mm thick factory made 2nd class hard wood glazed and skeleton shutter, open rebated, prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutter as specified in SSR Part-I section 8, clause No 8.24 (b) complete all as specified and as directed by Engineer-in-Charge. Make : M/s Goel Brothers, Raipur / M/s Pioneer Timber, Chandigarh / M/s Goyal Industries, New Delhi / M/s Jain Doors pvt Ltd, Haryana / M/s India Wood & Wood Pdts, Mangalore / M/s MP Wood Products, Indore / M/s A1 Teak Products, Indore / M/s Jain Wood industries( Brand : JAYNA)

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with M.S. square tube and fixing in opening as per specification & drawing on Serial Page No 178 of SSR Part II (pertaining to item No 08095) and edges to be painted to match with prelam sheet complete all as specified and as directed by Engr-in-Charge. Make : RAJSHRI / SINTEX / TUFFFLON / M/s Navratan Specialty Chemical LLP – ‘Brand : GIZA’

Supply and fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of M. S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC `C` channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at site as per specification & drawing on Serial Page No 174 of SSR Part II (pertaining to item No 08080) including necessary aluminium builders hardware for one door to be provided such as 100mm dia butt hinges - 3Nos, tower bolt 200mm dia - 2Nos, handle 200mm long - 2 Nos etc complete all as specified and as directed by Engineer-in-Charge. Make : RAJSHRI / SINTEX / TUFFFLON / M/s Navratan Specialty Chemical LLP – ‘Brand : GIZA’

Supply and fix in repair floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring 140mm size, complete all as specified and as directed. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix in repair stainless steel butt hinges, medium weight, 125mm size all as specified and directed. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix in repair aluminium anodised barrel tower bolt of extruded section size 150mm complete all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix in repair extruded aluminium alloy handles fabricated types, anodised, of size 150 mm long complete all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix aluminum anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy 300mm long, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix aluminium powder coated coloured sections for sliding or openable windows, ventilators, doors, partitions etc including fabrication of frame & shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc including all accessories such as glazing clips and rubber beadings for fixing glass panes / wire mesh in frame complete all as specified and directed by Engineer-in-Charge. Note:- (i) Glass panes will measured & paid separately . (ii) Rubber beading will not be weighed.

Supply and fix anodised aluminium grill, square/rectangular or similar section, fixed with channel of size 38mm x 12mm x 1.3mm "DECO GRILL of Dg -101" of size7 x 4.5mm thick complete all as specified and as directed.

Supply and fix 4.0mm thick black glass, ordinary quality in square exceeding 0.5 Sqm in each pane, fixed in aluminium windows complete all as specified and as directed by Engineer-in-Charge. Make : Modiguard/Atul/Kohinoor/Swastik/Saint Gobain

Supply and fix 4.0mm thick figured glass, pin headed type ordinary quality fixing with oil putty and glazing clip, in squares not exceeding 0.5 Sqm in each pane complete all as specified and as directed by Engineer-in-Charge. Make : Modiguard/Atul/Kohinoor/Swastik/Saint Gobain

Supply and fix in repairs aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed by Engineer-in-Charge

Supply and fix aluminium anodised curtain rail, 25mm dia etc complete all as specified and as directed by Engineer-in-Charge.

Supply and fix aluminium anodised brackets for 25mm dia curtain rail etc complete all as specified and as directed by Engineer-in-Charge.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish out side MD land complete all as specified and as directed by Engineer-in-Charge.

Material and labour for non skid coloured ceramic tiles, 7 to 8mm thick (square/rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match over and including screed bed of 15mm thick in Cement Mortar (1:4) complete all as specified and as directed by Engineer-in-Charge. Make: H R Johnson / Orient Bell Tiles / Kajaria / Somany Tiles Ltd / Nitco tiles / Swastik Tiles / RAK tiles

Material and labour for joint free, coloured glazed ceramic tiles of size 350mm x 250mm x 7 mm thick / 450mm x 350mm x 7mm , on vertical surfaces etc., set and jointed in neat cement slurry and pointed in coloured cement to match over & including cement plaster 10mm thick in CM (1:4) complete all as specified and as directed by Engineer-in-Charge. Make: M/s H R Johnson / M/s Kajaria / M/s Somany Tiles Ltd / M/s Nitco tiles / RAK tiles

Material and labour for joint free, glazed ceramic tiles of size 600mm x 600mm x 7 to 8mm thick, set and jointed in neat cement slurry and pointed in coloured cement to match over & including cement plaster 10mm thick in CM (1:4) complete all as specified and as directed by Engineer-in-Charge. Make: M/s H R Johnson / M/s Kajaria / M/s Somany Tiles Ltd / M/s Orient tiles

All as per item No. 34 described here-in-before but on skirting with 10mm thick backing coat in cement mortar 1:4 etc complete all as specified and as directed by Engineer-in-Charge

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid dry or laid dry and pointed complete all as specified and as directed by Engineer-in-Charge.

Supply and fix granite (mushroom granite) tiles 20mm thick, machine cut, work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platform bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of mushroom granite stone including necessary moulding of edges as required at site including grinding and polishing over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

Material and labour for machine cut, machine polished, green marble slab 18 to 20mm thick as in jambs and cills of windows etc as in frame work for aluminium sections, set, bedded and jointed with grey cement slurry mixed with admixture of pigment to match the shade of marble slab laid over and including screed bed or bedding layer of 10mm thick in cement mortar 1:4 all as specified and as directed.

Taking down cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and removing debris outside MD land complete all as specified and as directed by Engineer-in-Charge

Material and labour for 10mm thick rendering with cement mortar 1:6 on fair faces of brick or concrete surfaces and finished even and smooth without using extra cement etc complete all as specified and as directed by Engineer-in-Charge

Material and labour for rendering 5mm thick in cement mortar 1:3 on fair faces of concrete surfaces of ceiling and finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation of newly plastered surfaces and applying two coats of oil bound distemper over a coat of alkali resistant wall primer etc complete all as specified and directed by Engineer in Charge. Make: Asian Paints (Tractor) / Nerolac Paints /Jenson & NIcholson / Shalimar Paints

Material and labour for preparation of newly plastered ceiling surfaces and applying two coats of oil bound distemper with roller over a coat of wall primer etc complete all as specified and directed by Engineer in Charge. Make: Asian Paints (Tractor) / Nerolac Paints /Jenson & NIcholson / Shalimar Paints

Material and labour for preparing old steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint etc complete all as specified and as directed by Engineer-in-Charge. Make : Asian paints/ Nerolac paints/Berger paints/ Shalimer paints/ Dulux

Material and labour for painting with synthetic enamel paint of two coat over a coat of pink primer on new wooden surfaces of any description over 10cm width or girth including preparation of surfaces. all as specified and as directed. Make: Asian Paints (Tractor) / Nerolac Paints /Jenson & NIcholson / Shalimar Paints

Material and labour for preparing old wooden surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint etc complete all as specified and as directed by Engineer-in-Charge. Make : Asian paints/ Nerolac paints/Berger paints/ Shalimer paints/ Dulux

Material and labour for preparation of old decorated ceiling surfaces and applying one coat of oil bounddistember etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation of old decorated wall surfaces and applying one coat of oil bound distemper etc complete all as specified and directed by Engineer-in-Charge. Make: Asian Paints (Tractor) / Nerolac Paints /Jenson & Nicholson / Shalimar Paints

Material and labour for preparation of undecorated wall surfaces and applying 1.5mm wall care putty complete to smoothen the underneath surfaces complete all as specified and as directed by Engineer-in-Charge. Make: Asian Paints / Nerolac Paints /Jenson & Nicholson / Shalimar Paints / JK wall care putty

Material and labour for preparation of undecorated ceiling surfaces and applying 1.5mm wall care putty complete to smoothen the underneath surfaces complete all as specified and as directed by Engineer-in-Charge. Make: Asian Paints / Nerolac Paints /Jenson & Nicholson / Shalimar Paints / JK wall care putty

Supply and fix in repairs PVC valveless, syphonic action type low level flushing cistern 10 ltr capacity white with inlet ball valve, float and handle including brackets, including flush pipe of polyethylene of low or high density or PVC 32mm dia complete all as specified and as directed by Engineer-in-Charge. Make : Slimline/Commander/Hindustan.

Supply and fix in repairs vitreous china wash hand basin, white, flat back of size 550 mm x 400 mm excluding taps, waste chain and plug and porcelain stopper including brackets, chromium plated waste coupling, waste fitting etc, cutting for and pinning in ends of brackets, connecting to supply and waste pipe complete as specified and directed. Make : Cera/Hindustan/Parryware/Jaguar/Hindware/Johnson Note:- Pillar taps, waste fittings, PVC connection, PVC waste pipe shall be measured and paid separately as "Supply only

Supply only pillar taps fancy type cast copper alloy with capstan head, chromium plated, screwed down high pressure, with or without lettered ‘hot’ or ‘cold’ with long screwed shanks and fly nuts, screwed for iron pipes, 15mm bore complete all as specified and directed by Engineer-in-Charge Make : Jaquar (Essco)/Prayag / Seiko

Supply and fix in repairs 15mm bore bib taps, fancy type, chromium plated, cast copper alloy, long body with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule all as specified and as directed. Make : Jaquar (Essco)/Prayag / Seiko

Supply and fix in repairs, concealed stop valve fancy type cast copper alloy, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes or for unions of 15mm bore complete all as specified and directed by Engineer-in-Charge Make : Jaquar (Essco)/Prayag / Seiko

Supply and fix in repairs, 100 mm bore CI floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed by Engineer-in-Charge. Make : Prince / Supreme / Finolex

Supply and fix in repairs, UPVC Nahani trap,100 mm dia with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) etc, complete all as specified and as directed by Engineer-in-Charge.

Material and labour for 15mm thick rendering in cement mortar 1:3 mixed with water proofing compound in sunken floor including vertical surfaces upto 450mm height including applying a coat of Raincoat solution of make Dr Fixit or equivalent with uniform surfaces and supply and fix vitreous china squatting pan Orissa pattern pan of size 580 x 440mm white with integral foot rest, 'P' trap and conecting to flushing pipe, anti syphonage pipe etc (excluding flushing cistern) and connecting piece of CI pipe as per required upto T/Y joint including filling PCC 1:4:8 type D2 and over 40mm thick PCC 1:2:4, type B0 for floor with uniform surfaces and GI spout, medium grade with 50mm dia to provide that 450mm long to be extended from front surface of wall all as specified and as directed.

Supply and fix in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) with PVC seat cover, chromium plated hinges & nuts including ‘P’ trap / 'S' trap, connection to drain flushing pipe, antisphonage pipe complete all as specified and as directed. Make : Cera/Hindustan/Parryware/Jaguar/Hindware/Johnson

Supply and fix in repairs, sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever CI brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including necessary fittings such 40mm coupling waste pipe etc complete all as specified and as directed by Engineer-in-Charge. Make : Diamond / Nirali / Neelkant/Parryware/Prayag

Supply and fix in repair Swivel Shower of PTMT any colour for fixing with 15 mm pipe (Minimum weight 40gms) complete all as specified and as directed by Engineer-in-Charge. Make : Prayag / R.S. Industries (POLYTUF)

Supply and fix in repairs GI tubing, medium grade, 15 mm bore with all fittings and connections and fixing to wall/floor including cutting chases in brick walls pinning in if required and making good disturbed surfaces using with cement mortar 1:3 all as specified and directed. Make : Jindal / Zenith / Tata / Prakash / Swastik

Supply and fix in repairs GI tubing, medium grade, 20 mm bore with all fittings and connections and fixing to wall/floor including cutting chases in brick walls pinning in if required and making good disturbed surfaces using with cement mortar 1:3 all as specified and directed. Make : Jindal / Zenith / Tata / Prakash / Swastik

Supply and fix in repairs GI tubing, medium grade, 25 mm bore with all fittings and connections and fixing to wall/floor including cutting chases in brick walls pinning in if required and making good disturbed surfaces using with cement mortar 1:3 all as specified and directed. Make : Jindal / Zenith / Tata / Prakash / Swastik

Supply and fix 32mm dia low density polyethylene pipes (LDPE) of pressure rating @ 6 kgf/ cm2 fixed to wall complete all as specified and as directed by Engineer-in-Charge. Make: Finolex/Prince/Kisan/Supreme/SFMC

Supply and fix in repairs rotational moulded polyethylene water storage tanks 1000 litres capacity with inlet connections, three layer (cylindrical or vertical with closed top) HDPE with ISI marked, hoisted and fixed in position either inside or out side of the building, including fixing accessories and connecting up pipes securing access covers etc complete all as specified and directed by Engineer-in-Charge Make : Sintex / Polycon, Jaipur / Rotex / Infra

Supply and fix in repairs Ball Valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed of 25mm bore complete all as specified and as directed by Engineer-in-Charge (Minimum weight - 142 gms) Make : Jaypee/GMP/Neta/Zoloto/Prayag/Symet

Supply and fix in repairs gun metal gate valve, 25mm bore, with iron wheel head, screwed both ends for iron pipes, ISI marked and fixed with suitable size of new union complete all as specified and as directed by Engineer-in-Charge. Make : Leader/Zoloto/Seiko/Sant/ Essco/Prayag

Demolition of the existing brick coba treatment over roof slab completely including thoroughly cleaning complete all as specified and removal of the demolished material to outside of MD land complete all as specified and as directed by Engineer-in-Charge.

Material and labour for PCC 1:2:4 type B0 (using 12.5 mm graded aggregate) with 2% by weight of cement or as per manufacturer's instructions water proofing as in levelling course, haunching, coping and similar works over RCC roof surface and RCC over head tank top surface including rounded or chamfered on edges and formwork etc complete all as specified and as directed by Engineer-in-Charge

Material and labour for APP modified waterproofing treatment over existing RCC roof slab with following specification including brushing off the surface to receive the treatment obtain the required surface complete as directed by Engineer-in-Charge :- (a) Applying oil bound bituminous primer @ 0.4lit/Sqm of density 0.87-0.89Kg/lit of 250C on the prepared dry roof surface. (b) Supply and lay 4mm thick APP membrane reinforced with non woven polyster matt, weight not less than 3.90 kg per sqm by torch application with minimum 10cm side lap and 15cm end lap. The laying of membrane shall be got done through an authorized applicator of manufacturer of APP membrane. (c) Over the membrane provide 20mm thick screed in cement mortar 1:4 mixed water proofing compound at the rate of 2% by weight of cement (d) Provide 300 x 300 x 20mm thick machine pressed cement concrete tiles with minimum thickness of joint (not exceeding 3mm) are thoroughly filled with water proof polymer based joint mortar. ( The tiles shall be laid to the slope to avoid stagnation of water) Note : (i) Water proofing compound will be measured and paid separately (ii) Quoted rate includes the disconnection existing tanks of any litres capacity including all fittings, setting aside (for lowering if reqd) for roof treatment & reconnecting and refixing in position including all fittings complete all as directed.

Material and labour for APP modified membrane roof treatment to parapet wall / inaccessible roof surface to the following specification:- (a) Applying oil bound bitumen primer @ 0.40 lit / Sqm of density 0.87 - 0.89 Kg/lit of 25 0 C after preparation of surface. (b) upply and lay 4mm thick APP membrane reinforced with non woven polyster matt, weight not less than 3.90 kg per sqm by torch application with minimum 10cm side lap and 15cm end lap. The laying of membrane shall be got done through an authorized applicator of manufacturer of APP membrane. (c) Applying one coat of solar reflective bituminous paint all as per manufactures's instruction complete all as specified and as directed.

Material and labour for removing vegetation, trees, plants and shrubs etc in any position by cutting hole into brick wall / concrete surfaces (for removing the roots of trees/plants) area not exceeding 0.50sqm each and using acid to burn the all roots of tree/plants and making good disturbed surfaces with cement concrete 1:2:4 type B1, using 20mm graded stone aggregate mixed with and including water proofing compound @ 3% by weight of cement and including making good adjoining surface with existing finishes all as specified and as directed by Engineer-in-Charge. Note: The unit quoted rate shall be deemed to include WPC & necessary scaffolding as required.

Material and labour for surface preparation of existing concrete components including griding/rubbing carefully by grinder without damaging the existing concrete including cleaning the surfaces by blower , removal of external plaster wherever exists. Cost inclusive of transportation, labour conveying debris away from the Defence land, tools and tacklers, lead and lift and clean water thoroughly complete all as specified and directed by Engr-in-Charge.

supply and fix Mild steel bars 10mm dia and over, cut to length, bent to shape required for stiffners etc and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engr-in-Charge.

Material and Labour for Mild Steel bars 6 to 8mm dia and over, cut to length, bent to shape required including cranking bending spirally for hooping for column hooking ends and binding with and including mild steel wire (annealed) complete all as specified and as directed by Engineer-in-Charge.

Demolition of reinforced cement concrete of any description in any position including necessary scaffolding arrangement (reinforcement cut as required to facitate demolition) and removing concrete debris and depositing outside MD land all as specified and as directed by Engineer-in-Charge. Note : Reinforcement obtained from this item shall be handed over to contractor on account of sch of credit .

Supply & fix MS/TS dowel pins/staple/shear pins including drilling holes in concrete and providing labour and but excludes the materials for grouting the pins.etc complete all as specified and as directed by Engineer-in-Charge.

Repairing of excessively damaged concrete portion by using superfluid dual shrinkage compacted and providing, casting with micro concrete of grade M-40 at all levels with all leads and lift as directed including mixing, laying, levelling, finishing including curing and formwork of steel or marine ply complete all as specified and directed by Engineer-in-Charge. Make: Fosroc / SIKA / BASF / Krishna Conchem or equivalent approved .

M & L for Reinforced cement concrete Nominal mix B1 type 1:2:4 (using 20mm ;graded stone aggregate) as in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like etc complete all as specified and as directed by Engineer-in-Charge.

Providing and fixing the formwork to pour the micro-concrete / concrete using steel shutters or 12mm marine ply to have the form finish including de- shuttering, etc. complete all as specified and as directed by Engineer-in-Charge

Providing and applying the rust cleaner (Re-backler solution) to exposed corroded reinforcement @ 0.20Ltr/Sqm or approved make over prepared reinforcement including removing concrete all around, alkaline in nature to the existing/ additional rebars including wire-brushing manually or by mechanical tools, clean etc. complete. Measurement on the basis of area of concrete exposed etc complete all as specified and as directed by Engineer-in-Charge-in-charge.

Providing and applying two coats of anticorrosive epoxy phenolic rebar protective system IPNet RB or equivalent of approved make and quality comprises of resin and hardener mixed in equal proportion by volume with minimum 9-10 hours between the coats, sprinkling dry sand when 2nd coat is tacky so as to provide rough finish and ensuring air curing of minimum 10 hours after the top coat before any subsequent treatment etc. including scaffolding etc. complete all as specified and as directed by Engineer-in-Charge

Providing and applying a priming Cubic Metrebonding coat of two component Epoxide Resin conforms to ASTM-C-882-91 of approved make and quality to clean and sound concrete area by brush or any other established method by mixing Base and curing agent in 2:1 proportion by weight for joining old and new concrete as per technical specifications of manufacturer. Work shall be carried out as per the manufacturers specifications & certificate on this account shall be taken from consultant and as approved by Engineer-in-charge etc complete.

Repairing the damaged concrete portion by average 20 mm thick polymer plaster @ a dose of 5% in ratio 1:3 (C:M) over the exposed non structural member surface including making the surface evenly smooth etc as per manufacturer's instruction. (Measurement on the basis of finished area).

Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete including fittings such as switches, ceiling roses, pendants, regulators, sockets etc., removing materials out side MD land in case of Credit and making good disturbed surfaces of walls, floors, etc., all as specified and as directed.

Material and labour for Point wiring for complete with PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor conforming to IS-694, 1.5sqmm (nominal area) drawn through and including non metallic rigid PVC casing / capping (not less than 20mm wide) or 20mm dia non metallic rigid PVC conduit (ISI marked) and accessories on surface of wall/roof with sunken type pressed steel/welded terminal boxes made out of 1.6mm mild steel sheet, 3mm thick laminated sheet cover for mounting of switches, socket outlets, regulators etc., including provision of PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor 1.5sqmm as earth continuity conductor and connecting to common earth dolly complete all as specified and as directed by Engineer-in-Charge. Note: Serviceable switch / socket outlet shall be reused.

One light / Fan / Exhaust fan / bell point controlled by one, one way switch

One 3 pin 5/6 Amps switch socket outlet combination point on independent board.

One 3 pin 5/6 Amps switch socket combination point on the same board with other switches controlled by one switch.

One bell/buzzer point controlled by 1 push button on the same board with other switches or independent with cables 1.5 sqmm size

All as per item No 83 described here-in-before but for point wiring with 2.5 sqmm single core standard copper conductor and one run of 2.5 sqmm copper conductor, standard for earth wire for one switch socket outlet point 15/16 amps on the independent board.

Supply and fix Switch Piano, flush type, single pole, one way, 5/6 Amps, 240 volts, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T / Havells

Supply and fix Switch bell push, flush type, single pole, one way, 5/6 Amps, 230 volts, ISI marked complete all as specified and as directed. Make: Anchor / Legrand / L&T

Supply and fix Call bell electric (Ding Dong type) suitable for working on 230 volts AC supply multi music type complete all as specified and as directed. Make: Anchor / Legrand / L&T

Supply and fix Ceiling rose, surface type Bakelite, three terminal 65x32mm, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T

Supply and fix switch socket outlet, combination 5 Pin 5Amps / 3 Pin 6Amps, flush type, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T

Supply and fix socket outlet, combination 5 in 1, 3 Pin, 5/15Amps, flush type 240 volts, universal ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T

Supply and fix stepped type electronic fan regulator on existing phenolic laminated sheet etc complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T

Supply and fix angle holder, PVC/Polycarbonate type with back plate suitable for batten / angular fittings complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T

Supply and fix, batten type LED tube light fitting, 1x20 watts, 230 volt, 4 feet with long lasting all pre-wired fixed on walls with all fixing accessories such as 2 Nos of PVC square/round boxes, screws, etc and connecting up with three core flexible copper conductor cable of size 24/0.20sqmm complete all as specified and directed by Engineer-in-Charge-in-Charge, Make : Havells Cat Part No LHEXACP7UN1W020 or equivalent in Bajaj / CG / Phillips

Supply and fix, surface and wall mounted LED batten with polycarbonate housing and integrated electronic driver of 2 feet 10 watts with necessary electric wiring all fixing accessories such as 2 Nos of PVC square/round boxes, screws, etc and connecting up with three core flexible copper conductor cable of size 24/0. 20sqmm complete all as specified and directed by Engineer-in-Charge-in-Charge, Make : Havells Cat Part No LHEXBTP71N1W009 or equivalent in Bajaj / CG / Phillips

Supply and fix 5 star energy saving ceiling fan,1200mm sweep, AC, single phase,230 Volts and connecting up including provision of flexible wire 23/0.0076 size, three core, 1100 Volt, twisted, PVC insulated, copper conductor, multistranded for connection from ceiling rose or connector to fan complete all as specified and as directed by Engr-in-Charge. Make- Crompton Greaves, Bajaj, Orient, Khaitan, Havels

Supply and fix exhaust fan, AC, single phase, 230V, 450mm sweep, 1400 RPM, single phase with double ball bearing , 5 blade, metallic robust rust proof body & blade with louver for protection of bird and rain water including cutting round shape in wall, grouting the foundation bolt in the wall, making good the disturbed surfaces of wall including rendering, painting to match the existing surfaces and connection with three core copper flexible wire 16/0.209mm from ceilling rose to fitting complete all as specified and as directed by Engr-in-Charge. Make- Crompton Greaves, Bajaj, Orient, Khaitan, Havells

Note: Deduct Credit for demolished / dismantled material of Rs. (-) 47520.00 (Minus) as listed in Schedule of Credit. Tenderers will not quote against this item being a tentative amount to be considered to arrive at the 'Contract Sum'