Supply and Conversion of Gun metal C I C S Casting For The Season 2022-23

Description

Casting: Cast Iron Scrapper casting charges for new scrapper as per drg.

Casting: Cast Iron Scrapper casting charges after adjustment of CI scrap including burning losses as per drg.

Casting: Cast Iron Clamp for Boiler, casting charges for new clamp as per drawing/sample. Temp. 1100°C

Casting: Cast Iron clamp after adjustmentof CI scrap including burning losses as per drg/sample. Temp. 1100°C

Casting: Channel and brackets for boiler as per drg./sample - casting charges for new channel and brackets Temp. 1100°C

Casting: Channel and brackets for boiler as per drg /sample casting charges after adjustment of CI scrap including burnning losses. Temp. 1100°C

Casting: C.I. Grate Bar for boiler furnace as per drg,/sample Casting charges for new grate bar temp. 1100°C

Casting - CI door with frams for 20 ton. Boiler chamber as per drg. Casting charges after adjustment of CI scrap including burning losses. Temp. 1100°C

Casting: CI Mouth piece.Casting Charges for new CI Mouth piece and baflle as per drawing/sample. Temp. 1100°C

Casting: CI Mouth piece and baflle after adjustment of CI scrap including burning losses as per drawing/sampl. Temp. 1100°C

Casting: CI Elephant Ear for 20 ton. Boiler Furnace after adjustment of CI scrap including burning losses as per drawing/sampl. Temp. 1100°C

Ph bronze worm wheel complete for R.G. Box size 8"FSM ratio 15:1.as per drg./sample.

Ph bronze worm wheel for R.G. Box size 6" CRS ratio 20:1 as per drg./sample

Ph bronze worm wheel complete for R.G.Box size U-500 ratio 20:1

Ph bronze worm wheel complete for R.G. Box size U-600 ratio 20:1

Ph bronze worm wheel complete for R.G. Box size U-700 ratio 20:1

Ph bronze worm wheel complete for R.G. Box size U-800 Ratio 20:1

Ph bronze worm wheel Complete for R.G. Box size V-500 ratio 20:1

Ph bronze worm wheel Complete R.G. Box size V - 600 ratio 20:1

Ph bronze worm wheel Complete R.G, Box size V - 700 ratio 20:1

Pinion for Cane Unloader - material EN-9 No. of teeth 20 dia 141mm,face width 98mm, bore 50mm

Pinion for Cane Unloader - material EN-9 No. of teeth 18 dia 200mm,face width 100mm, bore 30mm

Pinion for Cane cane unloader - material EN-9 No. of teeth 18, dia 160mm,face width 125mm, bore 45mm,

Pinion for Cane Unloader - material EN-9 No. of teeth 18 dia 160mm,face width 122mm, bore 45mm

Pinion for Cane unloader - material EN-9 No. of teeth 24 dia 165mm, face width 82mm, bore 50mm

Pinion for Cane unloader - material EN-9 No. of teeth 17 dia 114mm, face width 65mm, bore 40mm

Supply of Ist Mill TRPF DWWS/botom Roller bearing bore size 240mm, as per drg. No. ASR/TRPF/10/1997/A on conversion basis

Pinion for Cane Unloader - material EN-9 no. of teeth 22, dia 145mm, face width 65mm, bore 50mm.

Supply of Ist Mill TRPF DWWS/bottom Roller bearing bore size 244mm, as per drg. No. ASR/TRPF/10/1997/B on conversion basis

Gun Metal Top/side Roller bearing for Mill as per drg. No.ASR/MH/45/1985/A on conversion basis

Gun metal Top/ side Roller bearing Mill as per drg. No.ASR/MH/45/1985/B on conversion basis

Gun Metal Top/ side Roller bearing for Mill as per drg. No. ASR/MH/45/1985/C on conversion basis

Gun Metal Bottom half Roller bearing for Mill as per drg. No. ASR/MH/23/84 on conversion basis.

Ist Mill TRPF top bottom Roller bearing bore size 240mm as per drg. ASR/TPF/10/1997/A on conversion basis.

Mill TRPF Top/ bottom Roller Gun metal bearing bore size 244mm as per drg. ASR/TRPF/10/1997/B on conversion basis

EN-9 Worm shaft for R.G. Box Size 8" as per drg./sample.

EN-9 Worm shaft for R.G. Box Size 6" as per drg./sample.

EN-9 Worm shaft for R.G. Box Size U-500 as per drg./sample.

EN-9 Worm shaft for R.G. Box Size U-600 as per drg./sample.

EN-9 Worm shaft for R.G. Box Size U-700 as per drg./sample.

EN-9 Worm shaft for R.G. Box Size U-800 as per drg./sample.

EN-9 Worm shaft for R.G. Box Size U-1200 as per drg./sample.

EN-9 Worm shaft for R.G. Box Size U-1400 as per drg./sample.

EN-9 Worm shaft for R.G. Box Size V-500 as per drg./sample.

EN-9 Worm shaft for R.G. Box Size V-600 as per drg./sample.

EN-9 Worm shaft for R.G. Box Size V-700 as per drg./sample.

EN-9 Worm shaft for R.G. Box Size V-335 as per drg./sample.

Ph Bronz worm wheel for R.G. Box Size V-335 as per drg./sample

Ph Bronz worm wheel for R.G. Box Size U-1200 as per drg./sample

Ph Bronz worm wheel for R.G. Box Size U-1400 as per drg./sample

CS Gear No of teeth - 96 Face width - 120mm, PCD -1219.2mm, Module -12.7 dedendum - 14.694,PR Angle -20degree for cane carrier drive as per drg.

CS Pinion No of teeth - 20 Face width - 120mm, PCD -254mm, Module -12.7 dedendum - 14.694,PR Angle -20degree for cane carrier drive as per drg.

Willman Bibby coupling Code No. 318 Standard type with pilot bore 50mm specification 318A/50-18

Bagasse Feed Hopper (C.I. Piece for bagasse Feeder IJT Bottom single coller asper drg.No. ASR/Boiler FH2/34/8 on conversion basis.

C.I.Clamp for IJT Boiler one conversion basis As per drawing No. ASR/Boiler IJT/130606

C.I.Hanger for IJT Boiler (Elephant Ear Arh Type)on conversion basis Drg. No.ASR/Boiler/ IJT/10/06

C.I.Lock on conversion basis

C.I.Hanger (Beam) as per our drawing on conversion basis

C.I.Magma Pump Rotor as per Size - OD-352mm, Reducer-155mm Length-335mm on conversion basis

Cast Steel Coupling for Mill Size- 30"x 60"New Material IS1030

Cast Steel Coupling for Mill Size- 30"x60" New Material but material IS2708

Cast Steel Coupling for Mill Size-30" x 60" conversion IS 1030

Cast Steel Coupling for Mill Size-30"x60"on conversion IS2708

Cast Steel Coupling for Mill Soze-30"x 60" Machining Charges

Cast Steel Crown Pinion for Mill Size -30"x60 New Material IS1030

Cast Steel Crown Pinion for Mill Size -30"x60 New Material is IS2708

Cast Steel Crown Pinion for Mill Size-30"x60" on conversion basis IS1030

Cast Steel Crown Pinion for Mill Size-30"x60" on conversion basis IS1030 IS2708

Cast steel Crown Pinion for Mill Size Profiles Teeth Cutting Machining charges

Cast stel Trash Plate for Mill Size-30"x60" New Material IS1030

Cast stel Trash Plate for Mill Size-30"x60" New Material IS2708

Cast Steel Trash Plate for Mill Size-30"x60"on conversion basis IS2708

Cast Steel Trash Plate for Mill Size-30"x60" Machining Charges

Other Casting i.e. Trash Plate Beam etc. New Material IS-1030

Other Casting i.e. Trash Plate Beam etc. New Material IS-2708

Other Casting i.e. Trash Plate Beam etc. on Conversion IS-1030

Other Casting i.e. Trash Plate Beam etc. on Conversion IS-2708

Other Casting i.e. Trash Plate Beam etc. Machining Charges

C.S Coupling casting machining and supply of cast steel tail bar coupling (box) for mill as per mill drawing no ASR/MH/22/1988/R3, Specification:- Moc-cast steel as per IS : 1030 Gracle 22/45,Outerdia-805 mm, Length-460mm, Approx wt-980 kgs

KRISHI UDYOG SHALA

swastik metals