Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.2 LAccepted-AOC | L1 | Accepted-AOC Lowest Amount Quoted | |
| 2 | L2₹16.2 L+₹1,264.77 (0.08%)Rejected-Finance | L2 | Rejected-Finance Highest amount Quoted |
Tender Value
₹16.4 L
EMD Value
₹16,450
Closing Date
7 Mar 2025, 5:00 pmClosed
Block development Officer (B.P) Mayiladuthurai
Block development Office Mayiladuthurai
Construction of Anganwadi Building in Uluthukuppai Panchayat in Mayiladuthurai Block
2025_RDTN_529116_1
2421/2024/A2 date 25.02.2025
Open Tender
Civil Works - Buildings
Item Rate
120 days
Block development Office Mayiladuthurai
Refer Tender Document
6 documents required · 6 mandatory
₹0
₹16,450
Yes
24 Apr 2025
1 Mar 2025
7 Mar 2025
1 Mar 2025
7 Mar 2025
1 Mar 2025
Amount
Construction of Anganwadi building at Uluthukuppai Panchayat in Mayiladuthurai Block.
Earth work Excavation for Foundation in all soils and Sub Soil to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and requiring the sides of foundation.
Supplying and Filling foundation and basement with filling sand in layers not more than 15cm . Thick well ramed, watered and compacted Complete complying with stanard specification.
Cement concrete 1 : 4 : 8 mix using 40mm HBG metal for foundation including watering wherever necessary and laid in layers of not more than 15cm thick., compacting etc., complete complying with standard specifications and as directed.
Brick work in cement mortar 1:5 mix using country bricks 83/4"x41/4"x21/4" and conveyance of all materials to site and all labour charges etc complete
Foundation and Basement
Superstructure- Ground floor
Supplying & Erecting centering for sides & soffiots including necessary supports & strutting upto 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90 x 60cm & 10 gauge stiffened, welded with steel angle of size 25 x 25 x 3mm for boarding laid over silver oak joists(Country wood) of size 10 x 6.5cm spaced @ about 90cm c/c and supported by casurina props of 10 - 13cm dia. spaced @ 75cm c/c etc., complete complying with standard specifications and as directed by the departmental officers. Rate for 10m2.for the following items.(RCC floor slab, roof slab, Rectangular/ square, Tee/ Ell beams, Lintels, staircase waist slabs, Landing slabs, Landing beam, Portico beam etc., ).
RCC COLUMN FOOTING, & GRADE BEAM,
LINTELS, RCC SLABS, BEAMS, TEE or ELL BEAMS,
Supplying and Fabricating and placing in position MS steel or ribbed for steel for all reinforced cement concrete works as per the design given including cost of steel and binding wire in all floors etc, Complete complying with stanard specification.
Reinforced Cement concrete 1:1.5:3 using 20mm ISS HBG metal for all RCC item of works excluding cost of Rein forcement and fabricating charges, centering and shuttering but including curing and providing fixtures like fan clamps in the RCC floor or roof slabs wherever necessary and bearing surfaces of walls , sides and bottom of the slabs, beams etc., shall be finished smooth with cement mortar 1:3, 12mm thick. and with kraft paper without claiming extra as directed by the departmental officers complete complying with standard specifications
Upto Basement
Above Basement
Providing Granolethic floor finish in CM 1:2:4 mix using 10-12mm ISS HBG Metal to 25mm thick including cost and conveyance of all materials to site and all labour charges etc., complete complying with standard specifications and as directed by the departm
Paving the Floor with scratch proof ceromic tiles of size 305x305x6mm including cost and conveyance of all materials to site and all labour charges etc complete
paving the Floor with antiskid tiles including cost and conveyance of all materials to site and all labour charges etc complete
Dadooing with glazed tiles of size 200x200x6mm including cost and conveyance of all materials to site and all labour charges etc complete
Weathering course concrete using best quality broken brick jelly of size 20mm in pure slacked lime over the RCC roof slab in th proportion of brick jelly to lime being32:12.5 by the volume and laid over a single layer and consolidated to the required size
Finishing the top of the roof with one course of Machine Pressed Tiles of size 23x23x2 cm of approved quality laid in CEMENT MORTAR 1:3(One cement and three sand) 12 mm thick mixed with water proofing compound conforming to ISS by 2% weight of cement used and the joint pointed neatly to full depth of tiles with the same water proofing compound mixed with cement mortar,red oxide, etc., complete complying with standard specification
Plastering with CM 1:3,10mm thick.over the cement concrete for floor finish including curing etc., complete complying with standard specifications and as directed by the departmental officers.
Plastering with CM 1:5,12mm thick.over the cement concrete for floor finish including curing etc., complete complying with standard specifications and as directed by the departmental officers.
Provision for Cuddapah slab 20/30 mm tk for Cupboards inclding supply and fixing etc
Fabrication and supply of mild Steel Doors and Windows of any size with single leaf outer frame made of 35x35x5 mm equal M.S angle and shutter frame made of 25x25x5 mm M.S angle for horizontal and vertical member with stiffener and fully covered with 18
iv . Supply of window of size 1.20 x 1.30 m
v. Supply of Ventilator of size 0.60 x 0.45 m
vi. Supply of Ventilator of size 0.90 x 0.45 m
White washing two coats using best freshly burnt shell lime in all the floors including cost of lime, Blue, Fevicol type gum, brushes,scaffolding charges etc., complete complying with standard specifications and as directed by the departmental officers.
Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffolding arrangements, labour charges, etc., as per standard specification. (The colour and shade of the distemper shall be got approved by the Executive Engineer before use of work).
Plastic Emulsion Paint two coats over priming coat inculding cost and conveyance of all materials to site and all loboure charges etc complete
Painting two coats over new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with best approved best quality of synthetic enamel paint of approved colour over the existing priming coat etc., complete
Providing and fixing of PVC rain water down fall pipe 110mm dia with necessary T W Clamps, Plug, Shoes, bend, Screws, nails etc., complete
Provision for Citizen board and Information Board (community) etc complete
Light point SD 25
Fan point SD 25
Fan SOR SD 107
Pliug Point SD 38
CFL Lamp - BH fitting SD 80
DPIC Switch of 500 V SD 154
GI Pipe (40 mm)
Service wire SD 114
Exhaust Fan SD 114
Bulk head fitting SD 83
EB Deposit
Provision For Bala Panitnig
Provision For Baby Friendly Basin
Provision for 500 liters water Tank with pipeline & Fitting Arrangemets Water supply Arrangements etc ciomplete
Provision For European Water Including all labour Charges etc Completed
Provision for wash basin & Sanitary PVC pipe line 4" dia water supply pipe line
Provision For Tactile and Signages For Disabled Persons
Provision for Sanitary arrangements Etc complete
Provision for Rain Water Harvesting structure etc complete
Prvision For Name Board Charges
Provision For Photo Charges
GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column "BB" for all works in this package}
Mohamed Nawas (BID ID -1263890)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .