Fabrication, providing/fitting of new gate leaf structure along with allied work at LIS Bandu Rakh escape on D-9 canal and replacement of gate leaf along with winch machine at Tinda minor of D-9 distributaries of Ranbir canal along with allied works.

Fabrication, providing/fitting of new gate leaf structure along with allied work at LIS Bandu Rakh escape on D-9 canal

Dismantling the winch machine of 05 ton capacity from the hoisting channel and disconnecting the stem rod from the leaf structure then extracting out the damaged/worn out gate leaf structure with the help of manual labour using hydraulic crane and other tools and tackles required at site after removing accumulated mud/silt around the gate leaf. Fabrication of leaf structure at workshop of size 10’X05’ (approx.) using the ISMC channel of 100X50mm size with 05 No. vertical & 03 No. horizontal cross members for support by way of cutting /welding using superior quality electrodes. Providing and then welding the MS sheet of 10mm thickness on the frame of channel structure. Also making a provision for stem rod attachment with 2 no. L-shaped MS Clamps duly welded at centre top after ensuring the centre of gravity of leaf structure and having hole for nut and bolt attachment. Providing/fixing of flat rubber seal of appropriate size as per requirement to match with leaf structure at the bottom by providing & fitting of MS drilled MS flat for securing the seal duly riveted/bolted. Fabrication, providing & fitting of 05 Ton capacity manually operated, worm gear type winch machine after drilling the requisite hole on hoisting channel and fixing the winch machine by providing and fitting new nuts and bolt after ensuring the center of gravity of leaf structure . Complete painting of gate structure by way of Providing two coats of superior quality enamel paint after applying two coats of red oxide primer. Loading the gate structure along with other allied material in the mechanical transport for carrying to site of installation with the help of chain pulley block/crane. Unloading the gate structure and other allied material at site using crane/chain pulley block with the help of manual labour as per requirement. Installation of gate structure by way of lowering the leaf structure into the sliding grooves/channel using crane and required tools and tackles at site. Fitting of winch machine on the hoisting channel and connecting the stem rod to the leaf structure after ensuring the proper alignment/gravity of the gate structure. The firm should quote rate including rebate on old material/ scrap. Complete job includes cost of material, transportation charge, labour charges and testing for its smooth operation at Bandu Rakh.

Replacement of gate leaf along with winch machine at Tinda minor of D-9 distributaries of Ranbir canal along with allied works.

Fabrication of gate of 2’4”X4’2” for Tinda minor using 02nos vertical and 02nos horizontal channel of 3.0” size and welding of 4mm sheet on the duly welded frame of 2’4”X4’2” to make a complete leaf structure. Welding of 02 nos L clamp having hole for attachment of stem rod after ensuring the center of gravity of the leaf structure. The job involves extracting out the old damaged gate leaf structure along with winch machine from the hoisting channel after cutting the welded portion of the base plate. Providing /fabrication of new winch machine of capacity 02 ton. Loading the fabricated gate leaf, new winch machine and other allied material with the help of manual labour using tools and tackles in the load carrier for transporting to the site of installation. Unloading at the site and then inserting the gate in the sliding grooves with the help of manual labour/tripod chain pulley, requisite tools and tackles. And then fitting the new winch machine on hoisting channel after drilling the requisite holes and fixing it with require nuts and bolts. Attaching the stem rod to gate leaf after ensuring the gravity of the gate structure with require not and bolt, checking for its smooth operation. Complete painting of gate leaf structure, winch machine and supporting channel with one coat of metal primer and two coat of enamel paint. The firm should quote rate including rebate on old material/ scrap. Complete job includes cost of material, carriage charges and fitment/labour charge at site.

M/S UK MECH AND ELECT ENGG WORKS

M.S J K HYDRAULIC ENGGG AND FABRICATOR WORKS

AADISHWAR ELECTRICAL AND MECHANICAL WORKS

AADISHWAR ELECTRICAL AND MECHANICAL WORKS