REPAIRS TO PATH, HARD STANDING, DRAIN, CULVERT AND OTHER MISC WORKS AT AURANGABAD UNDER GE (S) AHMEDNAGAR

Amount

Demolition of brick work or stone / boulder masonary, built in cement or cement lime mortar, including all quoins, arches, pillars, etc complete all as specified and as directed.

Dismantling stone slabs and tiles /interlocking paver blocks of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15cm thick above or below ground level complete all as specified and as directed.

Demolition of cement concrete (reinforced) in ground floors and pavings etc n exc 15cm thick above or below ground level complete all as specified and as directed.

Demolition and breaking up drain pipes, 450mm dia of any description complete all as specified and as directed.

Demolition and breaking up drain pipes, 600mm dia of any description complete all as specified and as directed.

Taking down cement plaster on brick/ stone/ concrete wallls including raking out joints, hacking for key scrubbing down with water etc all as specified and as directed.

Excavation in trenches, not exc 1.50m wide and not exc 1.50m in depth; for foundations, etc. or for manholes etc area not exc 10 Sqm on plan and not exc 1.5m in depth and getting out in soft/loose soil all as specified and as directed.

Returning, filling in soil, including spreading, leveling, watering and well ramming in layers not exc 25cm thick all as specified and as directed.

Removing excavated soil to distance not exc. 50m and depositing where directed at a level not exc. 1.5 m above the starting point all as specified and as directed.

M&L for hardcore of guage exc 63mm but not exc. 100 mm of broken stone or boulders, deposited, spread and levelled in layers not exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and as directed.

M&L for PCC 1:4:8, type D2 using 40 mm graded stone aggregate as in foundations, filling and mass concrete all as specified and as directed.

M&L for PCC 1:3:6, type C1 using 20mm graded stone aggregates as in surface channels and drains complete all as specified and as directed.

M&L for PCC 1:3:6, type C1 using 20mm graded stone aggregates as in kerbs, mud stops or sides of interlocking tiles, rounded or chamfered angles including necessary formwork if any as required complete all as specified and as directed.

M&L for PCC 1:3:6, type C1 using 20mm graded stone aggregates as in coping, apex stones etc and like with rounded or chamfered angles including necessary formwork if any as required complete all as specified and as directed.

M&L for precast kerb stones of size 300mm x 150mm x 300mm in cement concrete 1:2:4, type B1 (using 20mm graded stone aggregates), machine made, with plain fair faces, including weathering, throating etc and setting in cement mortar 1:4 including necessary excavation, returning filling and removal of surplus soil etc complete all as specified and as directed.

M&L for precast reinforced cement concrete, 1:2:4 type B1 (using 20mm graded stone aggregates) as in drain cover/ culvert slab etc including necessary moulds, form work and set in cement mortar 1:4 complete all as specified and as directed. Note : Reinforcement shall be measured and paid seperately.

M&L for brick work with old size fly ash bricks, straight or curved on plan exc 6m mean redius, built in cement mortar 1:6 complete all as specified and as directed.

All as per serial item No 19 but except bricks Note : Serviceable bricks obtained from demolition shall be reused.

M&L for mild steel TMT bars, 10mm dia and over, cut to length, bent to shape required, including cranking, bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for mild steel framed work such as grills, gratings etc with ends of bars shouldered and/or rivetted or forged into spikes, framed guard bars and similar work conforming to Fe 290. Gde-165 complete all as specified and as directed.

M&L for 75mm thick PCC 1:4:8, type D2 (using 40 mm graded stone aggregates) as in sub-base, complete all as specified and as directed.

M&L for 75mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in plinth protection, finished even and smooth without using extra cement including provision of joint of size 10 mm wide & 10 mm deep and filling with bitumen mastic joint filling at every 3m length and at corners complete all as specified and as directed.

M&L for 40mm thick PCC 1:2:4, type B1 (using 20mm graded stone aggregates) as in floor, laid in panels, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 100 mm thick PCC 1:2:4, type B2 (using 40 mm graded stone aggregate) as in floor, laid in panels, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for precast cement concrete coloured chequered tiles with glossy finish of size 25cm x 25cm x 25mm thick, machine pressed with grey cement and pigment, set, jointed and pointed in neat cement slurry over and including 20mm thick screed bed or bedding layer in cement mortar 1:6 and pointed in coloured cement to match the colour of tiles complete all as specified and as directed.

M&L for 60mm thick, M-35 grade, precast cement concrete interlocking tiles (glossy / rubber matt finish), hydraulically pressed, cemented tiles of grey colour with pigments as in floor laid over and including 25mm thick sand cushion and including filling of interstices with fine sand complete all as specified and as directed.

M&L for 80mm thick, M-40 grade, precast cement concrete interlocking tiles (glossy / rubber matt finish), hydraulically pressed, cemented tiles of grey colour with pigments as in floor laid over and including 25mm thick sand cushion and including filling of interstices with fine sand complete all as specified and as directed.

M&L for 3mm thick glass dividing strips, inserted in position to conform to design complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces, in cement mortar 1:4, finished even & fair without using extra cement complete all as specified and as directed.

M&L for 450mm dia reinforced concrete pipes,class NP-3, laid & jointed complete with collars all as specified and as directed.

M&L for 600mm dia reinforced cement concrete pipes, class NP-3, laid & jointed complete with collars all as specified and as directed.

M&L for forming 12mm thick expansion joints, filled with preformed bituminous filler and top 30mm primed and sealed with sealing compound grade 'A' for 100mm thick floor/slab complete all as specified and as directed.

M/s S.R lahoti

M/S. M.A. Sharief engineers and contractors

sonu enterprises

M/s.M G Kulkarni

HG PATHAN CONSTRUCTION COMPANY

M/S Tirupati Goroba Shendge

D V Engineers and Contractors Pvt Ltd