PPERIODICAL SERVICES TO MD AND OTM ACCN AT NABHA UNDER GE (S) PATIALA

Amount

'Notes: (i) Please refer Schedule 'A' Notes of tender documents.

Taking down cement or cement lime plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc.complete all as specified and directed.

M&L for 15mm thick cement pastering in cement mortar 1:4 and mixig the water proofing compound as per manufactures instructions on brick or concrete surface of wall finished fair and even without using extra cement complete all as specified and directed. Note : Water proofing compound shall be measured and paid saparately.

Supply only integral water proofing compound ISI marked complete all as specified and directed.

M&L for 10mm thick cement plastering in cement mortar 1:6 finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5mm thick in cement mortar 1:3 as on concrete surfaces as in ceiling finished even and fair without using extra cement complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of cement primer complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion over complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces and applying three coat of white wash on ceiling surfaces complete all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of wall including washing rubbing down, stoping of distempered & painted surface and applying one coat of cement base paint complete all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of wall including washing rubbing down, filling nail holes with putty & painted surface and applying one coat of distemper complete all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of ceiling including washing rubbing down, stoping of distempered & painted surface and applying one coat of distemper complete all as specified and directed.

M&L for preparation old steel surfaces of any desription and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation old wooden surfaces of any desription and applying one coat of synthetic enamel paint complete all as specified and directed.

Material and Labour for exterior painting work including complete removal of existing loose paint layers till plaster level by using jet pressure washer and crack filling up to 3mm by using crack seal & up to 10mm by using textured crack filler. Touch-up by using wall putty with silicon additives followed by application of one coat of truecare exterior primer on walls and Chajjas and applying two coats of modified acrylic smooth emulsion exterior grade with silicon having anti-algal and Dust pickup resistance properties, Material should be applied (Dilution, Recoating period etc..) as per manufacturer instructions by using fully automatic air less spray machine having flow speed of minimum 1ltr per minute and pressure of 3300 PSI complete all as specified and directed.

M&L for complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean,free from dust, loose paint etc by skilled labour complete all as specified and directed. Note : Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. Proper masking to be carried out before primer and paint application.

M&L for applying acrylic thick wall care putty on internal/ external surfaces of walls/ ceilings/ soffits (thickness vary from1.5 to 2.5mm as required for desired smoothness and levelling of surfaces in two or more layers)by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving painting etc complete all as specified and directed.

M&L for applying two coats of oil bound distemper on walls, white or tinted applying over and including a coat of chalk whiting primer complete all as specified and directed. Note:-Oil bound distemper using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed make.

Material & Labour for applying one coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over old prepared surfaces of wall complete all as specified and directed.

Note for Ser item No 15 to 19 :- The work for periodical services shall include the following and the rates quoted by the bidders shall include the same :- (a) The work pertaining to periodical services shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials like Exterior Emulsion paint, putty etc after approval by the GE. (b) The Contractor shall upload with the documents under cover I "Memoradum of Understanding" (MOU) as per format given in Annexure ‘A’ after Schedule 'A' Notes with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected. (c) Use of Scaffolding, trestles, ladders, cradles etc necessary for execution of work, protective measures. (d) Removing of Nails, making good holes, cracks etc (e) Work in patches and in narrow / widths, bands, cornices, pilasters etc and cutting in edge of line where necessary and issurance to the worker. (f) Spreading and removing covering to doors, windows, floors, fittings etc to protect them from splashes. (g) Washing floors, cleaning glass, joinery , electric fittings , wirings etc. Drops and splashes of paint to be cleaned to the entire satisfaction of Engineer-in-Charge.

Notes: Applicable to (item No 02 to 19) 1. The items of Plastering/ Rendering, putty and further finishes shall be got executed in Stage wise manner (as mentioned below). After completion of every stage contractor will submit the stage passing certificate duly sign by all concerned as per format given in Appx ‘A’ after Schedule 'A' Notes. (a) Stage –I : Plastering / rendering. (b) Stage – II : Putty work. (c) Stage – III : First coat of finishes. (d) Stage- IV : Second coat of finishes. 2. Please note no further stage shall be executed till the certificate is submited to the GE.

M/s Rakesh Singla (BID ID -3379156)