Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.5 LAccepted-AOC | L1 | Accepted-AOC Bidder quoted L1 rates | |
| 2 | L2₹39.6 L+₹2,865 (0.07%)Rejected-AOC S NO 211 BEHIND SANE GURUJI HOSPITAL VIDHYA VIHAR HSG SOC HADAPSAR PUNE 411 029 | 411029 | L2 | Rejected-AOC Bidder not quoted L1 rates | |
| 3 | L3₹45.4 L+₹5.7 L (14.5%)Rejected-AOC | L3 | Rejected-AOC Bidder not quoted L1 rates |
Tender Value
₹44 L
EMD Value
₹88,000
Closing Date
19 Feb 2020, 6:00 pmClosed
GE SOUTH PUNE
No 1 General Bhagat Marg Pune 411040
8854 PERIODICAL/WELCOME MAINT AND CERTAIN BR AND EM REPAIRS LIKE REPLACEMENT OF WIRE MESH CURTAIN RODS GLASS MIRROR WASH BASIN SWITCH SOCKET AND ELECTRICAL FITTINGS IN MD ACCN AT A AND B WING OF DAD COMPLEX LULLANAGAR AREA UNDER AGE BR SOUTH PUNE
2020_MES_316265_1
8854 GE SOUTH PUNE
Open Tender
Civil Works
Item Rate
273 days
GE SOUTH PUNE
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE SOUTH PUNE
₹88,000
Yes
30 Mar 2020
18 Jan 2020
20 Feb 2020
18 Jan 2020
19 Feb 2020
3 Feb 2020
Amount
M & L for preperation of old decorated or unplastered surface including all cornices of walls and applying one coat of white wash all as specified.
All as per item no 1 above but one coat of white wash on ceiling complete all as specified and as directed.
M & L for preparation of old distempered surfaces of wall including washing rubbing down and stopping distempered surfaces and applying one coat of oil bound distemper ( White or tinted ) on walls complete all as specified and as directed.
M&L for complete removal of existing treatment, washing, scrubbing down, preparing and providing one priming coat and two coats of oil bound distemper on walls all as specified.
M&L for Complete removal of existing treatment and M&L for applying 2mm thick wall care putty and applying two coats of oil bound distemper on walls all as spd and directed.
M & L for scrapping and removing old paint stains, loose material and algae- fungus growth then cleaning of surface with water using pressure washer machine then crack filling with acrylic based textured crack filler an application of one coat of primero-primer cum sealer having alkali resistence prpoperty diluted with water and mixed with bio block in ratio 5:4:1 follwed by application of two coats of modified acrylic Apex exterior emulsion paint of approved shade having silicon addditive in paint which gives five year of performance warranty complete all as specified and as diurected [Note:- (i) The work should be done by Asian paints recommended applicator and the bidder should be able to furnish stage wise on site technical reports from the concerened company technologist. (ii) Rate quoted shall deemed to be inclusive of necessary scaffolding / security measures as the work is to be carried out for elevated height up to 12 Mtr height building.]
M & L for one coat of synthetic enamel paint on wooden surfaces of any description not otherwise discribed over 10 cm width of girth including preparation of old painted surfaces complete all as specified.
M & L for one coat of synthetic enamel paint on steel surfaces of any description not otherwise discribed over 10 cm width of girth including preparation of old painted surfaces complete all as specified.
Taking down cement plaster on brick/ block walling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
M & L for ready mix rendering 10mm thick in cement mortar 1:6 on brick/concrete surfaces finished even & smooth with a thin layer of sagol complete all as specified and as directed.
M & L for ready mix rendering 15mm thick in CM (1:4) on fair faces of PCC block walling, using water proofing compound as per manufacturers instructions surface finished with sponge finish complete all as specified and as directed. (Note : WPC shall be measured and paid separately)
M&L for 5 mm thick ready mix rendering in cement mortar (1:3) on ceiling surfaces and finished even and smooth without using extra cement complete all as specified and as directed.
M & L for Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over 2 mm thick wall care putty complete all as specified and directed.
M & L for Preparation of new plastered surfaces and applying two coats of cement base paint all as specified.
M & L for preparation of newly plastered surfaces and applying three coats of white wash on ceiling complete all as directed by Engineer-in-Charge.
Supply only integral water proofing compound.
S & F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm & fixed with stainless steel wire stapples including taking down the old wire mesh.
S&F aluminium powder coated fancy type curtain rod 25mm bore complete all as specified and as directed.
S & F aluminium powder coated brackets suitable for 25mm bore curtain rod (minimum projection from wall 75mm) fixed in wall including drilling, rawl plug, screws etc and repair the damaged surface and match with the existing complete all as specified and directed by Engineer-in-Charge.
Hacking out old broken glass (any thickness size, quality or description ) from wooden/ metal frames and M & L for sheet glass 3mm thick ordinary quality and glazing with oil puttyor fixed with beads, each pane n. exc 0.5 Sqm in area complete all as specified and as directed.
Hacking out old broken glass (any thickness size, quality or description ) from wooden/ metal frames and M & L for frosted glass 3mm thick ordinary quality and glazing with oil putty or fixed with beads, each pane n. exc 0.5 Sqm in area complete all as specified and as directed.
S & F Transparent Glass 7.5 x 7.5 inch corner bathroom shelves with bracket (set of 2) (Model- Joyo Cera Gls 132) complete all as specified and as directed.
S & F brass chromium plated Tubular towel rail 20mm dia "D" type 60cm long complete all as specified and as directed.
Taking down aluminium point wiring( light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants holder,regulators sockets, light fitting etc removing materials deposited to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.as per engr-in-charge.
Taking down old unserviceable / worn out aluminium sub main of any type and size complete all as specified and as directed.
M&L for point wiring of any length using approved colour coding as per IS,with stranded copper conductor 1.5 Sq.mm(Nominal area),single core,PVC insulated and unsheathed stranded FRLS cable 1100 volts grade,ISI - 694 marked in and including heavy duty,PVC casing caping including all accessories etc.,heavy duty ISI marked,mild steel concealed sunken boxes,1.6 mm thick and 60 mm depth with earth dolly duly painted with two coat of black bituminious paint over a coat of red oxide primer with laminated bakelite sheet of min. thickness of 3mm suitable for switches/sockets,etc,including PVC insulated stranded copper conductor 1.5 Sq.mm (nominal area) single core green PVC insulated FRLS cable as earth and connecting to earth dolly complete and including cutting and chases in the wall for box and all as specified for the following:- Note:- Making good of disturbed surfaces will be done by contractor without any claims.
One light/fan/ point controlled by one switch.
One 5 Amps Socket outlet point controlled by one switch on independent board.
One 5 amps socket outlet point on same board with other switches
One bell/buzer point controlled by one bell push
M&L for point wiring of any length using approved colour coding as per IS,with stranded copper conductor 1.5 Sq.mm(Nominal area),single core,PVC insulated and unsheathed stranded FRLS cable 1100 volts grade,ISI - 694 marked in the existing conduit ,with mild steel concealed sunken boxes with earth dolly with laminated bakelite sheet of min. thickness of 3mm sheet suitable for switches,sockets,etc including PVC insulated stranded copper conductor 1.5 Sq.mm (nominal area) single core green PVC insulated FRLS cable as earth and connecting to earth dolly complete and including cutting and chases in the wall for box and all as specified for the following:- (Note:- Making good of disturbed surfaces will be done by contractor without any claims.)
One light/fan point controlled by one switch.
One 5 Amps Socket outlet point controlled by one switch on independent board.
One 5 amps socket outlet point on same board with other switches
One bell/buzer point controlled by one bell push.
M&L for point wiring of any length using approved colour coding as per IS,with stranded copper conductor 2.5 Sq.mm(Nominal area),single core,PVC insulated and unsheathed stranded FRLS cable 1100 volts grade,ISI - 694 marked the existing conduit ,with mild steel concealed sunken boxes 1.6 mm thick & 60 mm depth with earth dolly duly painted with two coat of black bituminious paint over a coat red oxid primer with laminated bakelite sheet of min. thickness of 3mm sheet suitable for switches,including PVC insulated stranded copper conductor 2.5 Sq.mm (nominal area) single core green PVC insulated FRLS cable as earth and connecting to earth dolly complete and including cutting and chases in the wall for box and all as specified for 15 Amps socket outlet on independent board. (Note:- Making good of disturbed surfaces will be done by contractor without any claims.)
M & L for submain wiring complete with two single core 4 Sqmm PVC insulated, unsheathed multi stranded copper conductor FRLS cable, 1100 volts, FR grade in existing conduit, including continuous PVC insulated copper earth wire 2.5 Sqmm complete all as directed. [Note :- (i) 2 runs of 4 Sqmm conductor and one run of 2.5 sqmm earth wire shall be measured as one unit length. (ii) Making good of disturbed surfaces will be done by contractor without any claims.]
M & L for submain wiring complete with two single core 6 Sqmm PVC insulated, unsheathed multi stranded copper conductor FRLS cable, 1100 volts, FR grade in existing conduit, including continuous PVC insulated copper earth wire 4 Sqmm complete all as directed. [Note :- (i) 2 runs of 6 Sqmm conductor and one run of 4 Sqmm earth wire shall be measured as one unit length.) (ii) Making good of disturbed surfaces will be done by contractor without any claims.]
M&L for point wiring of any length using approved colour coding as per IS,with stranded copper conductor 2.5 Sq.mm(Nominal area),single core,,PVC insulated and unsheathed stranded FRLS cable 1100 volts grade,ISI - 694 marked in and including heavy duty, PVC casing caping including all accessories etc.,heavy duty ISI marked,with mild steel concealed sunken boxes 1.6 mm thick & 60 mm depth with earth dolly duly painted with two coats of anti corrosive paint over of red oxide primer, internally,covered with laminated bakelite sheet of min. thickness of 3mm sheet suitable for switches,including PVC insulated stranded copper conductor 2.5 Sq.mm (nominal area) single core green PVC insulated cable as earth and connecting to earth dolly complete and including cutting and chases in the wall for box and all as specified for 15 amps socket outlet point on independent board complete all as specified and as directed. (Note:- Making good of disturbed surfaces will be done by contractor without any claims.)
S & F 240 V, 20 amp Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB complete all as specified and as directed.
S&F piano type switch 5 amps single pole, 240 volts complete all as specified and as directed.
S&F bell push,flush type,5 amp,240 volts complete all as specified and as directed.
S&F bell electrical ding dong including hard\wood board bell push,flush type,5 amp,240 volts complete all as specified and as directed.
S&F ceiling rose surface type three terminals,240 volts complete all as specified and as directed.
S&F socket outlet 5 amps 5 pin 230 volts flush type on same board complete all as specified and as directed.
S&F socket outlet multipurpose 2 in 1, 5/15 amps, 230 volts flush type complete all as specified and as directed.
S&F piano type switch 15 amps single pole,240 volts complete all as specified and as directed.
S&F lamp holder (Angle/bracket) insulated body, with back plate for batten fittings with 5 watt LED bulb complete etc. complete all as specified and as directed. (Make-Philips / Wipro / HPL)
S&F in replacement of ceiling fan regulator, electronic step type, delux, suitable for fan 48"/56" sweep complete all as specified and as directed.
M & L for Sub main wiring complete with two single core 4 sqmm,1100 volts grade, PVC insulated, stranded copper conductor FRLS cable with continuous copper earth conductor of 2.5 sqmm in and including PVC casing caping complete all as directed by Engineer-in-Charge [Note :- (i) Making good of disturbed surfaces will be done by contractor without any claims. (ii) 2 runs of 4 Sqmm conductor and one run of 2.5 Sqmm earth wire shall be measured as one unit length.]
M & L for Sub main wiring complete with two single core 6 sqmm,1100 volts grade, PVC insulated, stranded copper conductor FRLS cable with continuous copper earth conductor of 4 sqmm in and including PVC casing caping complete all as directed by Engineer-in-Charge [Note :- (i) Making good of disturbed surfaces will be done by contractor without any claims. (ii) 2 runs of 6 Sqmm conductor and one run of 4 Sqmm earth wire shall be measured as one unit length.]
S&F MCB DB TPN 4 way double door with 200 amps rated busbar 415 V, recess mounted/wall mounted all as directed and specified by Engineer in charge. [Make :- Legrand,Scenider,HPL]
S&F MCB DB SPN 8 way ,double door, with 200 amp rated busbar 240 V,recess mounted all as specified and directed. [Make :- Legrand,Scenider,HPL]
S&F vertical 4 way TPN double door,recess mounted/wall mounted DB incl one number,MCCB as incomer 3 pole and neutral of 100A rated capacity & 16KA breaking capacity,pre-fitted at factory all as specified and directed by Engineer in charge. [Make :- Legrand,Scenider,HPL]
S&F MCB DB SPN 4 way double door with 200 amps rated busbar 240 V, recess mounted with common earth dolly complete all as directed and specified by Engineer in charge. [Make :- Legrand,Scenider,HPL]
S&F MCB SP 6-32amps,10KA,'C' series complete all as specified and as directed.
S&F MCB SPN 10-40 amps,10KA, 240V,'C' series complete all as specified and as directed.
S&F MCB TPN 63 amps ,10KA,415 V,'C' series complete all as specified and as directed.
M & L for earthing with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm buried directly in ground earth pit not less than 2.25 m deep below normal ground level, with top edge of the plate vertically to a depth of not less than 1.5 m below ground level connected to and incl GI wire 4 mm dia and GI pipe 15 mm dia light grade for protection to the extent of 7.5 m as earthing lead by means of GI bolts and nuts etc connecting to equipment with provn of charcoal and salt etc all as per electrical plate No 3 of SSR Pt-I incl RCC cover, watering arrangement with GI pipe 20 mm dia and MS funnel, concrete pit incl excavation and earth work in any type of soil and testing on completion etc complete all as specified and as directed. (NOTE:-GI earth wire and protection pipe beyond 7.5m will be measured and paid separately)
M & L for fixing earth continuity conductor or main earth lead fixed to wall or buried in ground or drawn in GI pipe with 4 sqmm GI Wire complete all as specified and as directed.
Supplying and fixing LED tube light fitting complete with all fitting and fixing accessories, 1X20 Watt pre-wired with high efficiency electronic driver,glare free,smooth light distribution conforming to CAT Part No.Garnet 20 W LED (D532065) of Wipro or of equivelent in Havells / HPL / Philips complete all as specified and as directed.
Supply and fixing LED tube rod 1 x 20 W with high efficiency glare free, smooth ligh distribution conforming to Cat Part No : HPLLEDT8PCP20CW of HPL or of equivalent in Wipro/Phillips/Havells all as specified here-in-after including taking down old fitting.
Supply and fixing Integral LED Security Light Luminaire 30 W comprising of epoxy powder coated aluminium housing, enclosed with glass cover in frame suitable for 50/40 mm GI Pipe (including GI pipe) complete with accessories conforming to Cat Part No : HPLLEDSL3060S of HPL or of equivalent in Wipro/phillips/Havells complete all as specified here-in-after including taking down old fitting.
S&F in replacement of sleek LED Cadila mirror light fitting complete in all respect having high output diffuser of 2 feet length,9 W LED.Cat Part No HLPLEDCAD09CW of HPL or of equivalent in Havells/Philips/Wipro make specified here- in - after.
Taking down MCB DB / Main switch of any type and size including MCCB / MCBs complete all as specified and as directed.
Sunny Enterprises
Neelkamal Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .