Infra Structure Facilities to District Resource Centre for Panchayats Building at Madurai District under RRGSA

Infra Structure Facilities to District Resource Centre for Panchayats Building at Madurai District

Electrification

Wiring with 2 x1.5 sq.mm.PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with Module Plastic surface mounting box on wall with 6A one way module switch with module front plate with painting of Suitable colour for Open PVC Light point / fan point (for electronic regulator) 5 points / coils Higher End

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with Module Plastic surface mounting switch box on wall with 6A one way module switch with module front plate with painting of Suitable colour for Open PVC Light point / fan point (for electronic regulator) (6 points / Coil) HIgher End

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC Rigid pipe on wall and ceiling with PVC accessories with suitable Module GI switch box on wall with 1 no. 6A one way module switch and 1 no. 6A 3/2 pin module socket with module front plate with painting of Suitable colour with continuous earth wire connection of 1.5 sq.mm copper wire for Open PVC conduit Plug point (8 points / Coil) Higher End

Wiring with 2 x 1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A FT switch and making good of the concealed portion with suitable colour for PVC concealed light (6 points per coil) (for rooms like bath, toilet & pumproom, etc.)

Supply and fixing of single box type 4'40W fluorescent fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed FRLS copper leads from terminals to the fitting

Supply and fixing of 18W LED Round type Recessed fitting with LED (Higher end) on false Ceiling from ceiling with PVC unsheathed FRLS copper leads from terminals to the fitting.

Supply and fixing of WT bulk head fitting with guard suitable for 15 W LED Bulb

Supply and fixing of 1200mm (48") AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp

Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete without provision of hole in the wall

Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire with painting of suitable colour.

Supply and Run of 3 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 4 sq.mm copper wire with painting of suitable colour.

Supply and fixing of 12 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 100 A 4P MCB as incoming and 4 nos. 32A 3P MCB, 24 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Higher End

Supply and fixing of 200A TPN sheet steel double break switch with HRC fuses and neutral on suitable angle iron frame work with MS cable entry boxes and with earth connection only

Service Connection Accessories L.T. 1100V pvc Aluminium Armoured Under Ground Cable With ISI Mark 31/2 core 185 sq.mm. PVC Armoured UG Cable

Supply and Laying of 3 1/2 x 185 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and fixing of brass cable gland for 3-1/2 x 185 sq.mm. PVC armoured LTUG cable with earth connection

Supply and Laying of 3 1/2 x 50 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and Laying of 4 x 16 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and frxing of brass cable gland for 3-1/2 x 50 sq.mm. PVC armoured LTUG cable with earth connection

Supply and fixing of brass cable gland for 2 x 16 sq.mm. PVC armoured LTUG cable with earth connection

Bore Well

Drilling of borewell in Hardrock area including labour charges for insertion of PVC casing pipe.

From 0 upto 150m Below ground

Supply and delivery of PVC (ISI) Casing pipe suitable for 150 mm dia bore well including cost of all charges

Supply and delivery of borewell Three phase submercible pumpset 50lpm x 125m head including all labour charges etc -WD-M1617

Supply and delivery of Three phase 6HP Panel board star delta with two levelguard and auto start including all labour charges etc WD-M1909

Supply and delivery of 50mm GI pipe including all labour charges etc

Supply and delivery of 50mm GI Coupling including all labour charges etc

Supply and delivery of 4sqmm 3core flat cable including all labour charges etc

Erection of submercible pump in to the borewell with all materials cost of labour charges etc

Common Infrastructure Items

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete M-0651

Training Hall

Supplying office table of size approx. : 1600mm (L) x 600mm (D) x 750mm (H) and having side table cum storage unit of size 900mm x 450mm x 750mm (H) The side table having a two drawer on top bottom with swing type shutters with lock and key arrangements. The Table top made out of 25mm thick particle board and 0.6mm decorative laminate finish with postformed finising as per approved design and direction of Engineer-in-Charge..

Supplying wooden chair with arms made of seasoned hardwood frame, seat and back with 12 mm commercial plywood and 40 mm thick high density foam cushion upholstered with rexine/fabric of approved shade, complete with polishing, screws, corner blocks, necessary hardware and finishing as per approved design and direction of Engineer-in-Charge.

Supplying steel chair with writing pad having MS tubular frame, laminated writing pad with supporting bracket, powder coated finish complete as per approved design and direction of Engineer-in-Charge.

Supplying and fixing White Writing Board of size 1200 mm × 900 mm made of magnetic steel surface with melamine / porcelain finish, aluminium frame with corner caps, complete with wall mounting arrangement as per approved design and direction of Engineer-in-Charge.

Supplying and installation of Desktop pc -i5 Core 12th Gen Intel Processor with UHD730 Integrated Graphics with monitor, keyboard, mouse and necessary accessories as per technical specifications and Laser Printer (A4 size) with USB/LAN connectivity complete as per direction of Engineer-in-Charge.

Supplying and placing Computer Table and Revolving Computer Chair complete as per specification and direction of Engineer-in-Charge.

Supplying and installation of 2.0 TR (approx. 6.2–7.1 kW) High Wall Split Type Inverter Air Conditioner, suitable for 230 V, 50 Hz, single phase AC supply, complete with indoor and outdoor units, copper refrigerant piping, insulation, wiring and all accessories as required.

Multi Purpose Hall

Supplying office table of size approx. : 1600mm (L) x 600mm (D) x 750mm (H) and having side table cum storage unit of size 900mm x 450mm x 750mm (H) The side table having a two drawer on top bottom with swing type shutters with lock and key arrangements. The Table top made out of 25mm thick particle board and 0.6mm decorative laminate finish with postformed finising as per approved design and direction of Engineer-in-Charge..

Supplying wooden chair with arms made of seasoned hardwood frame, seat and back with 12 mm commercial plywood and 40 mm thick high density foam cushion upholstered with rexine/fabric of approved shade, complete with polishing, screws, corner blocks, necessary hardware and finishing as per approved design and direction of Engineer-in-Charge.

Supplying and placing Steel Almirah size 1800 mm (H) × 900 mm (W) × 450 mm complete as per specification and direction of Engineer-in-Charge.

Supplying steel chair with writing pad having MS tubular frame, laminated writing pad with supporting bracket, powder coated finish complete as per approved design and direction of Engineer-in-Charge.

Supplying and fixing White Writing Board of size 1200 mm × 900 mm made of magnetic steel surface with melamine / porcelain finish, aluminium frame with corner caps, complete with wall mounting arrangement as per approved design and direction of Engineer-in-Charge.

Office Room

Supplying office table of size approx. : 1600mm (L) x 600mm (D) x 750mm (H) and having side table cum storage unit of size 900mm x 450mm x 750mm (H) The side table having a two drawer on top bottom with swing type shutters with lock and key arrangements. The Table top made out of 25mm thick particle board and 0.6mm decorative laminate finish with postformed finising as per approved design and direction of Engineer-in-Charge..

Supplying Glass filled nylon base ,Gaslift,twin wheel nylon castors, T Type adjustable PU armrest .back :ABS with mesh upholstery Synchro tilt mechanism , inbuilt lumbar support,seat PU moulded cushion twin wheel nylon castors and 120mm Gaslight for seat height adjustment. Synchronised multi‐function mechaism.Glass filled nylon backrest with Korean mesh. Seat upholstered with PU module foam and approved fabric. Tested as per ANSI/BIFMA standards. 4D swivel and height adjustable armrest with PU pad as per approved design and direction of Engineer-in-Charge.

Supplying and placing Steel Almirah size 1800 mm (H) × 900 mm (W) × 450 mm complete as per specification and direction of Engineer-in-Charge.

Supplying and fixing White Writing Board of size 900 mm × 600 mm made of magnetic steel surface with melamine / porcelain finish, aluminium frame with corner caps, complete with wall mounting arrangement as per approved design and direction of Engineer-in-Charge.

Common

Supplying and fixing rectangular Pin-Up Notice Board of approved make, size 900 mm × 600 mm (or as specified), consisting of 12 mm soft board / fiber board backing , Front surface covered with high-quality fabric / felt cloth of approved colour ,Aluminium anodized frame (minimum 25 mm width) with rounded corners ,Hard board / MDF backing support, Suitable wall mounting arrangement with screws, rawl plugs and fasteners complete as per specification and direction of Engineer-in-Charge.

Supplying, fabricating and fixing outdoor type Office Name Board of size approximately 1200 mm × 900 mm (or as specified), consisting of the Made of 3 mm thick Aluminium Composite Panel (ACP) sheet / 2 mm MS sheet ,Properly framed with MS angle frame (minimum 25 × 25 × 3 mm) ,MS poles 75 mm NB (medium class) GI pipe / 75 × 75 mm MS square tube Embedded in PCC foundation block (1:2:4 mix) of size approx. 450 × 450 × 600 mm depth ,Base plate welded and properly grouted complete as per specification and direction of Engineer-in-Charge.

Supplying, installation and fixing of solid-state Public-Address Amplifier, suitable for 230V, 50 Hz AC supply, with minimum 120–250 Watts RMS output power, having Minimum 3–4 Mic inputs , AUX / USB / Bluetooth input (if specified), Individual volume controls, Bass & Treble control, Short circuit & overload protection, Output for 100V line speaker system . wall mounted PA speakers of minimum 15–30 Watts capacity, 100V line type, with ABS / metal enclosure, complete with mounting bracket, fasteners and wiring connections and Wireless microphone set (handheld / collar type) with receiver Complete with batteries, stand and connection to amplifier complete as per specification and direction of Engineer-in-Charge.

Supplying, installation and fixing of LCD/DLP Multi-Media Projector suitable for 230V, 50 Hz AC supply, with the following minimum specifications Brightness: Minimum 3500 ANSI Lumens, Native Resolution: Full HD (1920 × 1080) or XGA (as specified) ,Contrast Ratio: Minimum 15,000:1, Lamp Life: Minimum 5,000 hours (Normal Mode), Input Ports: HDMI, VGA, USB, Built-in Speaker (minimum 5W), Keystone Correction (Vertical/Horizontal) and Ceiling mountable type complete as per specification and direction of Engineer-in-Charge.

Supplying Steel Shoes/Chappals Stand of size approximately 900 mm (L) × 300 mm (W) × 900 mm (H) or as specified, fabricated from MS square tube frame (minimum 25 × 25 × 1.6 mm) and MS sheet / slotted angle shelves of minimum 1.0 mm thickness.

Supplying, installation and fixing of 2MP / 4MP IP based CCTV Camera, suitable for 230V AC supply (via PoE), having Resolution: Minimum 1920 × 1080 (Full HD) , Lens: 2.8 mm / 3.6 mm fixed lens ,IR Night Vision range: Minimum 20–30 metres , Weatherproof housing (IP66 rated) for outdoor type ,Wide Dynamic Range (WDR) ,ONVIF compliant, Wall/Ceiling mounting bracket ,Network Video Recorder HDMI/VGA output ,H.265 compression ,Remote viewing capability Minimum 1TB surveillance grade HDD and including RJ-45 connectors, saddles, clamps and testing complete as per specification and direction of Engineer-in-Charge.

Supplying Podium of size approximately 600 mm (L) × 450 mm (W) × 1200 mm (H), made of 18 mm thick pre-laminated particle board / BWR grade plywood finished with 1 mm laminate of approved shade on exposed surfaces and PVC edge banding complete as per specification and direction of Engineer-in-Charge.

Miscellaneous

Supplying Steel Typr Book Display Stand of size approximately 900 mm (L) × 400 mm (W) × 1200 mm (H) or as specified, suitable for displaying books, magazines, brochures and documents, fabricated as under Frame made of MS square tube 25 × 25 × 1.6 mm , Two coats red oxide primer and powder coated finish complete as per specification and direction of Engineer-in-Charge.

Supplying and fixing District Map of approved district (as specified), printed in multi-colour on high-quality 300 GSM art paper / vinyl sheet, laminated with matte / gloss finish for durability , Size: Approx. 900 mm × 600 mm , Mounted on 12 mm thick MDF / hard board backing , Framed with anodized aluminium frame (minimum 25 mm width) or wooden frame and Provided with suitable wall mounting arrangement complete as per specification and direction of Engineer-in-Charge.

Supplying and fixing Block With Village Panchayat Names of approved district (as specified), printed in multi-colour on high-quality 300 GSM art paper / vinyl sheet, laminated with matte / gloss finish for durability , Size: Approx. 900 mm × 600 mm , Mounted on 12 mm thick MDF / hard board backing , Framed with anodized aluminium frame (minimum 25 mm width) or wooden frame and Provided with suitable wall mounting arrangement complete as per specification and direction of Engineer-in-Charge.

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

Please Enable Macros to View BoQ information