Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.5 LAccepted-AOC GALI BAWARI WALI NOHARIA BAZAAR SIRSA 125055 HARYANA | SIRSA | HARYANA | 125055 | L1 | Accepted-AOC L1 | |
| 2 | L2₹24.3 L+₹20,716.20 (0.86%)Rejected-Finance | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹25.6 L+₹1.5 L (6.04%)Rejected-Finance NEAR S B O P WARD NO 1 SURDULGARH MANSA | SURDULGARH | MANSA | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹26.0 L+₹1.9 L (7.77%)Rejected-Finance FLAT NO 10 S NO 98 PLAT NO 78 SAI SAYAJI PARK A RIGHT BHUSARI COLONY KOTHRUD PUNE 411 038 | PUNE | MAHARASHTRA | 411038 | L4 | Rejected-Finance Other than L1 | |
| 5 | L5₹26.4 L+₹2.3 L (9.48%)Rejected-Finance H NO 2049 HANUMAN COLONY NEAR TCP 3 HISAR CANTT PIN 125006 HARYANA | HISAR | HARYANA | 125006 | L5 | Rejected-Finance Other than L1 |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
19 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Sirsa
GE (AF) Sirsa-125055
Comprehensive Maint to Married Accn of Pocket-05 (Officers Qtrs) at AF Stn Sirsa
2023_MES_598098_1
GE/SRA/T-01/2023-24
Open Tender
Miscellaneous Works
Item Rate
210 days
GE (AF) Sirsa
Please Refer Tender Documents
8 documents required · 8 mandatory
₹500
GE (AF) Sirsa
₹50,000
Yes
4 Jul 2023
27 May 2023
20 Jun 2023
27 May 2023
19 Jun 2023
6 Jun 2023
29 May 2023 - 1 Jun 2023
Amount
Demolition of Cement Concrete (un-reinforced) of any description in Ground Floors, Pavings, etc. not exc. 150mm thickness (above or below Ground Level) and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed.
M&L for Cement Concrete 1:2:4 (20mm graded stone aggregate) as in Coping, Bed Plates, Holdfast, Bed Block, Kerb Stones including necessary Formwork and weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.
M&L for Cement Concrete 1:2:4 (12.5mm graded stone aggregate) 25mm thick in Sub-base for laying/fixing of Tiles in Floor, complete all as specified and as directed.
M&L for Cement Concrete 1:3:6 (20mm graded stone aggregate) 75mm thick as in Plinth Protection, finishing Cement Concrete surface Even and Smooth without using Extra Cement, including making joints 12mm wide upto total depth of concrete at every 3.00 metre interval and every change of direction, complete all as specified and as directed.
M&L for dismantling floor tiles alongwith screed bed, removal of debris outside AF land, cleaning of area to remove dust, loose particles, washing with water and providing Non-skid/matt finish Ceramic tiles, coloured, joint free, 7 to 8 mm thick (Square/rectangular), area of each tile exceedig 0.11 Sqm but not exceeding 0.18 Sqm in Flooring, set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the tiles, laid over and including Screed Bed 15mm thick in Cement Mortar 1:4, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be included in the Quoted Unit Rate.
-ditto- but for non-skid/matt finish tiles in skirting, fixed over and including Screed or Screed Bed 10mm thick in Cement Mortar 1:4, complete all as specified and directed. NOTE : Cost of Cement Screed Bed shall deem to be included in the Quoted Unit Rate.
-ditto- but for Vtirified Ceramic Tiles, 9-10mm thick (Square/ Rectangular), coloured, Light shade, Polished, area of each Tile not exc. 0.36 Square Metre in Floors, etc. Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Tiles, laid over and including 15mm thick Screed or Screed Bed in Cement Mortar 1:4, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be included in the Quoted Unit Rate.
-ditto- but for vitrified tiles in skirting, fixed over and including Screed or Screed Bed 10mm thick in Cement Mortar 1:4, complete all as specified and directed. NOTE : Cost of Cement Screed Bed shall deem to be included in the Quoted Unit Rate.
M&L for dismantling floor tiles alongwith screed bed, removal of debris outside AF land, cleaning of area to remove dust, loose particles, washing with water and providing Floor (Paver) Tiles 300 x 300 x 9.0 to 10mm, highly abrasive, Anti-skid, Impact Resistant, laid over and including 15mm thick Screed or Screed Bed in Cement Mortar 1:4, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be included in the Quoted Unit Rate.
M&L for taking down wall tiles alongwith screed bed, removal of debris outside AF land, cleaning of area to remove dust, loose particles, washing with water and providing Coloured/Printed Glazed Ceramic Tiles, 450x300x7mm thick in Vertical Surfaces i.e. Dado, Skirting, etc., set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, fixed over and including Screed or Screed Bed 10mm thick in Cement Mortar 1:3, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be included in the Quoted Unit Rate.
-ditto- but for Exterior Coloured Ceramic Tile 600x300x7.0 to 8.0mm thick in Vertical Surface i.e on exterior wall, facade, outer gate etc., set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, fixed over and including 10mm thick Screed or Screed Bed in Cement Mortar 1:3, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate.
Taking down existing switch board cover along with switches, sockets, regulator etc, to facilitate the tiling work and re-fixing the same on existing switch board with new hylam sheet & screws complete including concealing the open batten wiring wherever required on the site complete all as specified and directed.
M&L Dismantling Stone Slabs and/or Tiles of any description or thickness in Floors, Aprons, etc. laid, bedded and pointed in Cement Mortar, removal of debris outside AF land, cleaning of area to remove dust, loose particles, washing with water and providing Granite (of any type) Tiles, 18-20mm thick, machine cut, bedded and jointed with grey cement slurry and pointed with white cement and admixture of pigment to match the shade of granite stone including grinding and polishing, laid over and including 20mm thick Screed or Screed Bed in Cement Mortar 1:4, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be included in the Quoted Unit Rate.
-ditto- but for Granite (of any type) Tiles, 18-20mm thick machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement and admixture of pigment to match the shade of granite stone including grinding and polishing, fixed over and including Screed or Screed Bed 10mm thick in Cement Mortar 1:3, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be included in the Quoted Unit Rate.
Drilling of hole not less than 25mm dia in Granite for passage of gas pipe etc complete all as specified and as directed.
Taking down cement plaster from brick or concrete surfaces of any description including racking out joints, hacking for key, scrubbing down with water etc and removal of debris outside AF land complete all as specified and directed.
Demolition Brick work built in Cement Mortar and in any Position including all Quoins, Arches and Pillars, etc., removal of debris outsideAF land complete all as specified and as directed.
M&L for Brick Work with Fly-Ash Bricks (Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.
M&L for Rendering (Internal) 12mm thick, in Cement Mortar 1:6 on Brick Walls or on Concrete Surfaces, Plastered Surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed.
M&L for preparing New Plastered Surfaces of Walls by applying a Coat of Wall Care Putty, 1.5 mm thick including rubbing down with Sand Paper to obtain a smooth finish surface and applying with rollers Two Coats of Acrylic Distemper (as approved) over a Coat of Primer, complete all as specified and as directed.
M&L for Rendering 5.0mm thick in Cement Mortar 1:3 on Concrete Surfaces as in Ceilings etc., Plastered Surfaces finished Even and Smooth, without using Extra Cement, complete all as specified and as directed.
M&L for preparing Newly Plastered Surfaces of Ceiling and applying Three Coats of White Wash, complete all as specified and as directed.
M & L for 15 mm thick plastering in two layers, 10 mm + 5 mm in cement mortar 1:4, top layer of 5 mm thickness mixed with with water proofing compound (as per manufacturer's instructions) on brick/stone walls or concrete surfaces finished even and fair (upto any height) for external surfaces complete all as specified and directed. Note : Water Proofing compound shall be measured and paid seperately as "Supply only".
Supply only Integral Water Proofing Compound, conforming to IS and/or as approved, complete all as specified.
M&L for preparing New Plastered Surfaces of Walls by applying a Coat of Chalk Whiting (as Preparatory Treatment) and applying Two Coats of Weather Coat Exterior Emulsion Paint over a coat of cement primer with approved Tint as per manufacturer's instructions, complete all as specified and as directed.
M&L for Rough Cast Plaster on Brick Walls consisting Under Coat of Cement and Sand Mortar 1:3 not less than 10mm thick and while it is still in Plastic state the Rough Cast Mixture consisting of Crushed Stone or Fine Gravel mixed with Coarse Sand and Cement in the ratio 1:1:1 shall be applied and finished even, complete all as specified and as directed.
M&L for preparing New Rough Cast Plastered Surfaces of Walls by applying Two Coats of Weather Coat Exterior Emulsion Paint over a coat of cement primer with approved Tint as per manufacturer's instructions, complete all as specified and as directed.
S&F in repairs Non-asbestos Fiber Cement Building Boards, 6.0mm thick, fixed to Walls with Rawl Plugs and Steel Screws and applying Two Coats of Acrylic Distemper over a Coat of 1.5 mm thick wall care putty for priming the surface, and removal of debris from site complete all as specified and as directed.
Taking down Chowkat or Frame of any description (without taking off Shutter from the Frame) not exc. 1.50 Square Metre Each and removal from site complete all as specified and as directed.
S&F Factory made Solid PVC Door Frame of size 50x47mm made out of 5.0mm thick plain colour PVC Sheet reinforced with Mild Steel Square Tube and fixing in opening as per Specification and Drawing of MES Schedule Part-II, complete all as specified and as directed.
S&F Factory Made Solid Panel PVC Door Shutter 30mm thick (Style) Plain Colour (Ivory Shade) consisting of Frame made out of Mild Steel Tubes for Top & Bottom Rails of Mild Steel Frame shall be covered with Heat Moulded Wood Grain PVC ‘C’ Channel having a PVC Sheet Strip of 20mm width Stuck inside with Solvent Cement for Stiles and Wood Grain PVC Sheets for Top Rail Lock Rail & Bottom Rail on either side and as gap insert for Top Rail & Bottom Rail, Panelling of Wood Grain PVC Sheet to be fitted in the Mild Steel Frame welded/sealed to the Stiles & Rails with suitable 5.0mm thick x 15mm wide PVC Sheet Beading used inside Stiles and Rails and decorative PVC Beading of 10mmx10mm (90°) and jointed together with Solvent Cement and fixing in the Frame at Site, complete all as specified and as directed.
S&F Aluminium Barrel Tower Bolt 150mm long (weight not less than 160 Gram), Extruded Section, complete all as specified and as directed.
S&F Stainless Steel Butt Hinge 75mm long (weight not less than 60 Gram) and fixed, complete all as specified and as directed.
S&F Aluminium Handle 125mm long (weight not less than 90 Gram), Cast type, anodised, complete all as specified and as directed.
Taking down Pressed Steel Frame of any description (without taking off Shutter from the Frame) exc. 1.50 Square Metre but not exc. 4.00 Square Metre Each and removal from site complete all as specified and as directed.
Taking down Shutter of any description, exc. 1.00 Square Metre but not exc. 2.00 Square Metre Each and removal from site complete all as specified and as directed.
S&F Pressed Steel Frame for door of size 105x60mm using 1.25mm thick Mild Steel Sheets for Doors with One or More Rebates including necessary Fixing Lugs, Hinges, Lock Strike Plate, etc., complete all as specified and as directed.
S&F Pressed Steel Frame of size 125x60mm using 1.25mm thick Mild Steel Sheets for Doors with One or More Rebates including necessary Fixing Lugs, Hinges, Lock Strike Plate, etc., complete all as specified and as directed.
M&L Cement Concrete 1:3:6 (20mm graded stone aggregate) as in Filling Back side of Pressed Steel Frame, complete all as specified and as directed.
M&L for Flush Shutters of 32mm thick, sloid core construction with block board core and plywood face panels, cmmercial type on both sides and fitted to Steel Frame, complete all as specified and as directed.
M&L for factory made Glazed and Skeleton Shutter 35mm thick of Second Class Hardwood prepared to receive Gauge/Glass (without Sash Bars) fixed with mitred beeds supplied and fitted to Chowkat and securing Glass, Gauge, etc. sizes of Members of Shutter as specified in SSR Part-I, Section-8, Clause 8.24(a), complete all as specified and as directed.
S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed
S&F Aluminium Barrel Tower Bolt 200mm long (weight not less than 210 Gram), Extruded Section, complete all as specified and as directed.
S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, with length of bolt 250 mm complete all as specified and directed.
S&F Aluminium Handle 150mm long (weight not less than 120 Gram), Cast type, anodised, complete all as specified and as directed.
S&F Floor Door Stopper 150mm in size, Aluminum alloy Body and Tongue with Hard Drawn Steel Spring (weight not less than 90 Gram), complete all as specified and as directed.
S&F Mild Steel 300mm, Ordinary Rat Tail Rod pattern Springs including Roller and Roller Plate and fixed, complete all as specified and as directed.
M&L preparing New Wood and Wood Based Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Coat of Pink Primer, complete all as specified and as directed.
Taking down Steel Window Frame (without taking off Shutter from the Frame) of any description including Guard Bars/ Grill, exc. 1.00 Square Metre but not exc. 2.00 Square Metre Each, complete all as specified and as directed.
M&L Steel Window Box type using ERW ‘P’ Section comprising Double Frame for Gauged and Glazed Skeleton Shutter jointed internally with Flat Iron 40x3mm complete including Mild Steel Tower Bolts, Hinges, Handle, Stops, Lugs including GI Steel Wire Cloth, Glazing, etc. all as directed. Outer Section of Frame should be 50x25mm and Inner Section should be 40x20mm, complete all as specified and as directed. NOTE:- (a) For the purpose of Measurement & Payment Double Shutter with Frame shall be considered as One Unit. (b) Cost of Iron Mongery as ordered/required at Site, GI Steel Wire Cloth will deem to be included in the Quoted Unit Rate. (c) Guard Bars are included in the Quoted Unit Rate. Spacing of 10mm Square Bar will be 10 Cm Centre to Centre. (d) Glazing shall be Measured and Paid separately under appropriate Item. (e) Cost of Cutting Holes in Brick Walls, exc. Half Brick but not exc. One Brick thick, built in Cement Mortar for inserting of Cooler Stand, Lugs and Making Good to dismantled portion with Cement Concrete 1:2:4 (20mm graded stone aggregate) or Cement Mortar 1:3 (as required) and adjoining Surfaces in Cement Mortar 1:4 shall deem to be include in the Quoted Unit Rate.
S&F Sheet Glass 4.0mm thick, Ordinary quality and glazing with Oil Putty in Square not exc. 0.50 Sqm in Each Pane of Steel Windows, complete all as specified and as directed.
S&F Sheet Glass 4.0mm thick, Frosted quality and glazing with Oil Putty in Square not exc. 0.50 Sqm in Each Pane of Steel Windows, complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description in rafters, purlins and wind ties wtc and removal from site complete all as specified and directed.
M&L Mild Steel Framed Works such as Grills, Parking sheds, Gratings, etc. with Ends of Bars shouldered and/or riveted or forged into Spikes; Framed Guard Bars; Barred Iron Doors; Ladders; Framed Balusters; Walkways; Railings; cooler stands, Framework of Water Tanks and similar Work, conforming to Fe-290, Gde-E-165, complete all as specified and as directed.
M&L mild steel work in tubular trusses including special shaped washers etc complete using ERW or induction butt welded tubes conforming to IS-1161:2014 grade St-240 complete all as specified and directed. (NOTE: Quoted rates shall be deemed to include for cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing and fitting angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing complete)
S&F in repairs 2mm thick fibre glass reinforced transulcent corugated sheeting with two corrugations side lap fixed fixed with coach screw and washer in roof wall complete all as specified.
M&L preparing New or previously untreated Steel and Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Red Oxide Zinc Chrome Primer, complete all as specified and as directed.
M&L Taking down existing Steel Rolling Shutter including Hood Cover, Pull and Push type, area not exc. 8.0 Sqm Each, Sides of clear Opening and Cleaning the Side of Shutter Suspension Shafts, Anti-guide Channels and Greasing all the Moving Parts of the Rolling Shutter and straightening Rolling Shafts and replacement of Bolts, Nut, etc. as required for Smooth Functioning of Shutter and Re-fixing the same including Hood Cover, complete all as specified and as directed.
Dismantling/Taking down old existing Wooden Built-in Cup Boards of size 200x100x60 Cm (approx/nearest size) of any description including Making Good to dismantled portion of Brick Walls with Cement Concrete 1:2:4 (20mm graded stone aggregate) or Cement Mortar 1:3 (as required) and adjoining Surfaces in Cement Mortar 1:4, complete all as specified and as directed.
S&F Pressed Mild Steel Shutter 0.75mm thick for Built-in Steel Cup Board, Godrej Pattern, made to Shape and Size as required/ordered at Site, necessary Welding etc. and fixing to Pressed Steel Frame, Locking Device with cover & Mild Steel Handle, Hanging Rod made out from Conduit Pipe 19mm dia, 1.6mm Wall thickness for Built-in Steel Cup Board, Godrej Pattern, including Set of Mild Steel Socket Chromium plated to hold Conduit Pipe Hanging Rod 19mm dia for Built-in Steel Cup Board, Godrej Pattern, inclduding set of Mild Steel Peg Set (Set of 3) for Built-in Steel Cup Board, Godrej pattern, including Spary Painting with Two Coats of Synthetic Enamel Paint (First quality) over a coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed. Note: For measurement purpose, only exposed portion from front to be considered.
S&F Stainless Steel Curtain Rod 25mm dia/bore (as approved) including fixing stainless steel Bracket(shaped as approved) not less than 80mm long to wall with Screws/ secured with stainless steel side doom(as approved) fitted/tightened on Curtain Rod at both ends with screw, complete all as specified and as directed.
Supply & laying Steel Water Tubing 15mm bore (dia), including taking down, Galvanised, ‘medium grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other situation, complete as all specified and as directed.
M&L preparing Old Decorated/Treated Plastered Surfaces of Walls and applying One Coat of Acrylic Distemper (as approved), with rollers complete all as specified and as directed.
M&L preparing old Distempered surfaces of Walls by brooming down or steel wire brushing and scraping down and filling the existing Nails/ Screw Holes, etc. and applyng Two Coats of Distemper Oil Emulsion (as approved) with rollers after applying putty where applicable, complete all as specified and as directed.
M&L preparing old Distempered surfaces of Walls by Complete Removal of existing Treatment and applying 1.5 mm thick Wall Care Putty, Rubbing down with Sand Paper to obtain a Smooth Finish Surface including filling the existing Nails/ Screw Holes, etc. and applying Two Coats of Distemper Oil Emulsion (as approved) over a coat of pimer, with rollers complete all as specified and as directed.
M&L for preparation of old painted concrete or brick surfaces of any description over 10 CM girth/width not otherwise described and applying one coat of weather proof exterior emulsion on external wall surfaces incl cornices, fins, fascia etc complete all as specified & directed.
M&L for complete removal of existing treatment and applying two coats of exterior acrylic emulsion weather proof paint over a coat of alkali resistant primer to old decorated surfaces of walls of any description, over 10cm width or girth not otherwise described, complete all as specified and as directed.
M&L preparing old decorated/treated Wooden Surfaces of any description, width or girth including cleaning and applying one or more Coat(s) of French Polishing including a coat of Wood Filler on old Work, complete all as specified and as directed.
M&L preparing Old Decorated/Treated Wood and Wood Based Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed.
M&L preparing Old Treated/Painted Steel and Iron Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed.
S&F in repair Chromium plated brass Bib cock with wall flange (premium range), fancy type, short body, fixed to 15 mm bore of Iron pipe complete all as specified and directed.
S&F in repair Chromium plated brass Bib cock with wall flange (premium range), fancy type, long body, fixed to 15 mm bore of Iron pipe complete all as specified and directed.
S&F in repair 15mm bore chromium plated two way bib cock with flange (premium range), fancy type complete all as specified and as directed.
S&F in repair Chromium plated brass Pillar tap, fancy type. with areator (premium range), fixed to wash hand basin, complete all as specified and directed.
S&F in repair angle valve (premium range), 15 mm bore, cast copper alloy, chromium plated fancy type, concealed type with wall flange fixed to iron pipe complete all as specified and directed.
S&F in repair Chromium plated brass two way Angular stop cock (premium range), fancy type, concealed type with wall flange fixed to 15 mm bore of Iron pipe, complete all as specified and directed.
S&F in repairs Gun Metal Globe/Gate Valve 20mm bore (dia) with Iron Wheel Head, screwed both Ends for Iron Pipe complete all as specified and as directed.
S&F in repair chromium plated Hand shower (health faucet), ABS body with 1.2 metre long flexible tube in chrome finish with wall hook complete all as specified and directed.
S&F in repair Rotational Moulded Polyethene Water Storage Tank, 500 Litre Capacity, Cylindrical, Vertical with Closed Top, 3 layered, conforming to IS, hoisted and fixed in Position complete all as specified and as directed.
S&F in repair Rotational Moulded Polyethene Water Storage Tank, 1000 Litre Capacity, Cylindrical, Vertical with Closed Top, 3 layered, conforming to IS, hoisted and fixed in Position complete all as specified and as directed.
S&F in repair Ball Valve 20mm dia (minimum Weight 210 Gram), high pressure of PTMT with epoxy coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pip complete all as specified and as directed.
M&L Cleaning and removing all Scales and dirts from the Tank and mouths of circulating Pipes, etc. after draining out Water from the Tank of capacity exc. 250 Litre and not exc. 1000Litre, cleaning the Tank by scrubbing the deposits with Wire Brush, re-fixing Inlet and Outlet Pipes in the Same Position and writing Letters "CLEANED ON DD.MM.YYYY" (i.e. Date of Cleaning of Tank) not exc. 50mm in height, complete all as specified and as directed.
S&F in repair vitreous China Squatting pan ‘Orissa’ pattern, size 580 X 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, etc and including making good to floor, complete all as specified and directed. (MAKE : PARRYWARE, Cat No. C0117 / HINDWARE, Cat No. 20004 / JAQUAR, Cat No. CNS-WHT-OP01 / CERA, Model: COVY)
S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white, with 'P' or 'S' trap front or back inlet, fixing bolts (except flushing cistern and flush pipe) incl plastic water closet seat cover (white) and mild steel chromium plated or aluminium hinging device complete all as specified and directed. (Make : Parryware, Model : Elite / JAQUAR, Model: Continental / CERA, Model: Conventional / HINDWARE, Model: SLICK)
S&F in repair Plastic Water Closet Seat and Cover for Water Closet Pan (Pedestal Pattern), White, Closed Pattern with Flat bottom and Cover and Mild Steel Chromium plated or Aluminised Hinging Device and complete all as specified and as directed. NOTE: This item shall only be measured for existing EWC
S&F in repair Jet Spray with Connection Pipe 15mm bore (dia), Brass Chromium Plated and suitable for Wash Down Water Closet Pan (Pedestal Pattern) , complete all as specified and as directed. (Make : Essco, Cat No ALE-547/PRAYAG, Cat No: BEA-17 or equivalent model in other makes specified in tender)
S&F in repair White PVC Flushing Cistern 10 Litre capacity, Low Level Valve Less, Syphonic Action type with Inlet, Ball Valve, Float, flush pipe and Handle including Cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 and fixed including taking down/out unserviceable Flushing Cistern and connected items complete all as specified and directed. (MAKE : PARRYWARE, Model : Slim line Economy / HINDWARE, Model : Sleek Plus / CERA, Model : Corona / PRAYAG, Model: SMART)
S&F in repair Vitreous China Wash Hand Basin 550x400mm in size, White (Flat Back or Angle Back Type) with 32mm dia Brass Chromium Plated Waste Fitting, making good disturbed Surfaces in Cement Mortar 1:3 complete all as specified and directed. (MAKE : PARRYWARE, Cat No. C0406 / HINDWARE, Cat No. 10010 / JAQUAR, Cat No. CNS-WHT-801 / CERA, Cat No: S2040141)
S&F in repairs PVC Waste Pipe 32mm dia (bore) having 600mm long and fixed complete to Walls, Ceilings or in Floors, etc complete all as specified and as directed.
S&F 15mm bore heavy duty PVC connector pipe of length 600mm with PTMT coupling at both ends, screwed down for pipe as directed by Engineer-in-Charge.
S&F in repair Chromium plated brass Wall mixer (premium range), concealed type, with concealed body, with overhead shower arrangement fixed with 15 mm bore Iron pipe complete all as specified and directed.
S&F in repair Chromium plated brass Wall mixer (premium range), concealed type incl concealed body, with both overhead and telephone shower arrangement, fixed with 15 mm bore Iron pipe complete all as specified and directed. NOTE: Telephone shower shall be measured and paid seperately.
S&F in repair fancy type chromium plated telephonic hand shower (ABS Body), multiflow type with flexible tube and hook screwed for iron pipe (premium range) including frame complete all as specified and directed.
S&F in repair 15mm bore chromium plated single lever central hole basin mixer (premium range) without popup waste system with 450mm long copper pipe and brass nut, complete all as specified and directed.
S&F in repair acrylic bathroom cabinet box with mirror of size 622 mm X 422 mm size complete all as specified and directed. (MAKE: PRAYAG, Cat No: 555 or equivalent model in POLYTUF / JEXON / SHAKTI / NILKAMAL )
S&F in repair chromium plated brass over head shower rose with arm (premium range), with 3 flow, fixed to 15mm bore of iron pipe complete all as specified and directed.
S&F in repairs, Tubular towel rail (premium range), 20mm dia, 600 mm long between flanges including brass chromium plated, complete all as specified and directed.
S&F in repair Chromium plated brass Towel ring (premium range) complete all as specified and directed.
S&F in repairs towel rack (premium range) with lower hangar with hook complete all as specified and directed.
S&F in repairs toilet paper holder, surface type with flap complete all as specified and directed.
S&F Looking Mirror 5.0mm thick of size 450x600mm, fixed with Chromium Plated Brass Spacers 25mm to 30mm in size (One Each Corner) including rounding the edges of the Mirror and Fixed-in-repairs, complete all as specified and as directed.
S&F in repair Glass Shelf (Bath Tray) Accessories 45x15 Cm in size , complete all as specified and as directed.
S&F in repair sinks with drainage board made of stainless steel 1 mm thick in kitchen with plug washers, waste coupling, PVC waste pipe and fixing cantilever brackets connecting union to pipe, overall size of sink 914 mm x 460 mm and bowl size 405 mm x 354 mm x 203 mm complete complete all as specified and directed. (MAKE : CERA, Cat No: B4512201 /PRAYAG, Cat No. 1339D / PARRYWARE, Cat No: C855099 or equivalent model in NIRALI / ANJALI / JAYNA) (NOTE: Waste pipe shall be measured and paid seperately)
S&F in repair 15mm bore chromium plated sink cock (premium range), swivel casted spout (wall mounted model) complete all as specified and as directed by Engineer-in-charge
S&F in repair Stainless Steel Plate Rack 75x75x25 Cm in size, made out of Stainless Steel l.0mm thick with all Internal Fittings and fixing with Brass Chomium Plated Mild Steel Screws, complete all as specified and as directed.
S&F in repair CP Grating Round 100mm dia jointing with Solvent Cement complete all as specified and as directed.
S&F in repairs PVC (SWR) Floor Trap 75mm bore (dia) with Grating including jointing to Waste Pipe fixed in Cement Concrete 1:2:4 (20mm graded stone aggregate) complete all as specified and as directed.
S&F in repairs PVC (SWR) 75mm bore (dia) Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC Joints, with or without Ears, laid in Floors complete all as specified and as directed.
S&F in repairs PVC (SWR) 110mm bore (dia) Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC Joints, with or without Ears, laid in Floors complete all as specified and as directed.
S&F in repairs PVC (SWR) 75mm bore (dia) Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC Joints, with or without Ears, fixed to Walls complete all as specified and as directed.
S&F in repairs PVC (SWR) 110mm bore (dia) Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC Joints, with or without Ears, fixed to Walls complete all as specified and as directed.
S&F in repairs PVC (SWR) Bend 75mm bore (dia), any radius with Access Door, etc. jointing with Solvent Cement complete all as specified and as directed.
S&F in repairs PVC (SWR) Bend 110mm bore (dia), any radius with Access Door, etc. jointing with Solvent Cement complete all as specified and as directed.
M&L Stack Clamp for Pipe 75mm/110mm/150mm bore (dia), made out of Flat Iron 50x5mm and 16mm dia Round Iron Stay including Bolts and Nuts and securing Ends of Stays to Wall or Roof and Fixed-in-repairs, complete all as specified and as directed.
S&F in repairs Coloured PVC Board Scratch and strain free (weight not less 9 Kg/Sqm or having density of 600 KG per Cum) in Door, Shelves for Kitchen Cabinets, one side plain & other side laminated (Wood Grain Finish) , 18/19mm thick as required, jointed to form cabinet by means of PVC Adhesive Solvent and fixed using Self-tapping Aluminium Screws, including providing & fixing of Stainless steel L shaped hinges suitable for 18/19 mm PVC Board (minimum of 02 Nos for Each leaf ) to hold cabinet shutter , Stainless Steel Silver chrome Door Handle 100mm long (01 No for each leaf of shutter) and Door catcher (01 no for each leaf), complete all as specified and as directed. NOTE: Quoted unit Rates are inclusive of PVC board, handles, hinges, screws, Door catcher and adhesive etc.
S&F in repair stainless steel Cup and Saucer basket of size (370x485x100mm) and fitted to a telescopic drawer channel and PVC celuka Ply board with smooth movement . Make : Godrej (Product Code : 6129) or equivalent in HETTICH/OZONE/EBCO/HAFFLE
S&F in repair stainless steel Perforated Cutlery basket of size(370x485x100mm) and fitted to a telescopic drawer channel and PVC celuka Ply board with smooth movement, complete all as specified and as directed. Make : Godrej (Product Code : 6132) or equivalent in HETTICH/OZONE/EBCO/HAFFLE
S&F in repair 500 mm telescopic drawer channel fitted to celuka Ply Board and stainless steel basket for smooth movement, complete all as specified and as directed. Make: Godrej (Product Code : 5919) or equivalent in HETTICH/OZONE/EBCO/HAFFLE
Taking down Aluminium Frame of any description (without taking off Shutter from the Frame) exc. 1.50 Square Metre but not exc. 4.00 Square Metre Each and removal from site complete all as specified and as directed.
M&L Aluminium anodised Frame for Doors, Windows, Ventilators, Partitions, etc. having Powder Coating (minimum thickness of Powder coating 50 micron) with one or more rebates including Joining Cleat for fixing, etc., complete all as specified and as directed.
S&F Aluminium Anodised Door Shutter with Frame 101.40x44.45mm having size of Long Rails/Style, Top and Middle/ Centre Rail shall be 84.40x44.45mm and Bottom Rail shall be 110x44.45mm of Aluminium Sheet shall be 16 gauge, Panels shall be provided with 5.0mm thick Sheet Glass in upper portion and lower portion provided with 12mm thick PVC Sheet best quality (as approved), Jointing Cleats and Fixing Accessories including Locking Arrangement, fixed with Hinges to the Frame or Slididng Type or Pull & Push Type Shutters including Glazing Clip, Rubber packing, Aluminium Snap Beading, Aluminium Handle of size 150mm (2 No.), Mortice Lock of size 100 mm MS 4 - lever (1 No.) and all necessary Fittings and Fixtures¸complete all as specified and as directed. NOTE : Cost of Black/Tinted Sheet Glass, Stainless Steel Wire Cloth, Jointing & Packing Materials, anodized Aluminium Fittings, etc. shall deem to be include in the Quoted Unit Rate.
S&F Aluminium anodized Window Double Shutters Glazed and Gauged of Stainless Steel Wire Cloth having nominal dia of Wire 0.36mm and average width of aperture 1.40mm along with Aluminium Section with 50 micron anodizing size of Frame (chowkhat) 125x44.5mmx16 gauge size of Shutter, Top, Bottom and Side Rail 44.5x44.5mm x16 gauge Aluminium Section with 50 micron anodizing and 5.5mm thick Black/ Tinted Sheet Glass to be fixed on Glazed Portion including Aaluminium Grill and Stainless Steel Hooks and Eye to be provided as stay of Shutters, etc. complete including necessary Jointing Cleats, Glazing Clips, Rubber Packing, Aluminium Snap Beading, Screws anodized Aluminium Fittings such as Peg Stay 150mm long (1 No. for each Leaf), Hinge Type B-21 of 100mm long (2 No. for each Leaf), suitable Handle (1 No. for each Leaf) and 100mm Aluminium Tower Bolts (2 No. in each Leaf), and all necessary fittings, fixed-in-repairs, complete all as specified and as directed. NOTE : Cost of Black/Tinted Sheet Glass, Stainless Steel Wire Cloth, Jointing & Packing Materials, anodized Aluminium Fittings, etc. shall deem to be include in the Quoted Unit Rate.
S&F Sheet Glass 5.0mm thick, Tinted (as approved by GE) fixing to Aluminium Window including replacement of Rubber Packing and refixing Aluminium Beading, complete all as specified and as directed. NOTE : Cost of Rubber Packing shall deem to be included in the Quoted Unit Rate.
Repairing of Aluminium Door, Windows, Ventilators Shutter Fixed/ Side Hang /Sliding Type including replacement of necessary Jointing Cleats, Glazing Clips, Rubber Neoprene Packing, Aluminium Snap Beading, Screws, etc. and repairing of Locking Arrangement if any, complete all as specified and as directed.
S&F in repairs Door Closer Aluminium (Die cast) body, hydraulically regulated, Designation No. 3, Universal type, suitable for Door Shutters of 851mm to 1000mm in width and of weight between 61.00 to 80.00 Kilogram complete all as specified and as directed.
S&F in repairs Double Action Floor Spring Hydraulically Regulated made up of minimum 1.25mm thick Aluminium alloy Sheet Foundation Box, Main Body with Stainless Steel Cover, Governing Pivot made of Brass, Other Parts made of Mild Steel heavy duty complete all as specified and as directed.
S&F in repairs Mortice Lock Vertical type, size 100mm, Mild Steel, 4-Lever complete all as specified and as directed.
Dismantling of old snap grid ceiling frame of any thickness including ceiling boards, cover fillets etc, removal of dismantled items from site and M&L for provn of E- board tiles ceiling on GI powder coated channel/Tee/Grid frame work with the following specification including cutting holes in brick wall built in CM & making good in cement concrete 1:2:4 type B0/ CM 1:3 complete all as specified and directed with following:- (a) M&L Plugging to wall around the rooms & supplying & fixing GI powder coated angle of make (Armstrong or equivalent) of size 25x25 mm. (b) S&F of 1.60 mm dia GI wire suspenders with adjustable clamps including fixing to ceiling dash free fasteners. (c) S&F GI powder coated tee as in main & cross members at 595mm centre to centre to centre supported suspenders along with adjustable clamp to maintain level. (d) S&F E- board ceiling tiles of size 595mmx595mm and 4-5 mm thickness, confirming to relevant IS codes in squares of GI powder coated tee with clips made to shape, shade and pattern of ceiling board shall be as approved by GE.
Demolition of old/unsv RCC overhead tank of capacity 500 ltr to 1000ltr including dismantling removing the debris to outside of MD/AF area and making good disturbed surfaces complete all as specified and as directed.
M/s Har Nandi Construction Company
M/s MANN CONSTRUCTIONS
Ajay Enterprises
STAR CONSTRUCTIONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .