Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.2 LAccepted-Finance | ₹28.2 L | L1 | Accepted-Finance The Bidder is L1 |
| 2 | L 2₹29.5 L+₹1.3 L (4.71%)Rejected-Finance | ₹29.5 L+₹1.3 L (4.71%) | L 2 | Rejected-Finance The Bidder is L2 |
| 3 | L3₹32.0 L+₹3.8 L (13.5%)Rejected-Finance | ₹32.0 L+₹3.8 L (13.5%) | L3 | Rejected-Finance The Bidder is L3 |
| 4 | Rejected-Technical | - | - | Rejected-Technical Bidder has not technically qualified |
| Sl No | Description | Qty | Unit | P Thangavel L2 | N & T Projects L3 | VS CONSTRUCTION L1 |
|---|---|---|---|---|---|---|
| 1.00 | Supply and fixing frame work for partitions/ wall lining etc. made of Aluminium Square pipe 80x26x0.5 mm and other section of approved make conforming to IS : 733 and IS : 1283 and shall be smooth, rust free, straight, mitred and jointed mechanically wherever required placed along the walls, ceiling and floor in a grid pattern with spacing @ 100cm centre to centre vertically and @ 40 cm centre to centre horizontally or at required spacing near opening, with necessary welding at junctions and fixing the frame to wall/ ceiling/ floors with steel dash fasteners of 8 mm dia, 75 mm long bolt, including making provision for opening for doors, windows, cable conduits, switch boards etc., all as per direction of Engineer-in-charge | 270 | kg | 650 ₹1,75,500 | 775 ₹2,09,250 | 115 ₹31,050 Lowest |
| 2.00 | Providing and fixing 12 mm thick panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Fire retardant plywood conforming to IS; 5509 | 90 | sqm | 2,000 ₹1,80,000 | 1,100 ₹99,000 Lowest | 2,500 ₹2,25,000 |
| 3.00 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. - 1.5 mm thick | 90 | sqm | 800 ₹72,000 Lowest | 1,100 ₹99,000 | 1,000 ₹90,000 |
| 4.00 | Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991, in true horizontal level suspended on inter-locking metal powder coated T-Grid of hot dipped galvanised iron section of 0.40 mm thick on Silhouette profile,rotary stiched double webbed white with 6 mm reveal profile (white/ black),comprising of main-T runners of size 15x42 mm of length 3000 mm, cross - T of size 15x42 mm of length 1200 mm and secondary intermediate cross-T of size 15x42 mm of length 600 mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.With 15 mm thick integral densified micro edge light weight calcium silicate false ceiling tiles | 30 | sqm | 2,000 ₹60,000 | 1,250 ₹37,500 Lowest | 1,900 ₹57,000 |
| 5.00 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Double charge vitrified tile polished finish of size Size of Tile 600 x 600 mm | 75 | sqm | 1,000 ₹75,000 Lowest | 1,300 ₹97,500 | 1,300 ₹97,500 |
| 6.00 | Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) bedding in laying of floor tiles and jointing with grey cement slurry @ 3.3 kg/ sqm. | 75 | Sqm | 680 ₹51,000 | 10 ₹750 Lowest | 241 ₹18,075 |
| 7.00 | Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. | 75 | Sqm | 600 ₹45,000 Lowest | 1,100 ₹82,500 | 750 ₹56,250 |
| 8.00 | Providing and fixing anti static mat Class A ,2 mm thick as per direction of Engineer in Charge | 20 | Sqm | 480 ₹9,600 Lowest | 500 ₹10,000 | 1,000 ₹20,000 |
| 9.00 | White washing with lime to give an even shade :Old work (two or more coats) | 75 | Sqm | 15 ₹1,125 Lowest | 100 ₹7,500 | 25 ₹1,875 |
| 10.00 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour One coat | 120 | Sqm | 70 ₹8,400 Lowest | 180 ₹21,600 | 90 ₹10,800 |
Tender Value
₹34.2 L
EMD Value
₹1.0 L
Closing Date
9 May 2026, 4:00 pmClosed
Senior Manager (Engg -Civil)
Airports Authority of India
Development of NDB Building and Antenna Site at Salem Airport SH Civil Works
2026_AAI_274917_1
2026_AAI_Salem_NDB
Open Tender
Civil Works
Works
60 days
Salem Airport
Please refer the tender document
11 documents required · 11 mandatory
₹1,180
₹1.0 L
11 Jun 2026
18 Apr 2026
11 May 2026
18 Apr 2026
9 May 2026
18 Apr 2026
18 Apr 2026 - 27 Apr 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supply and fixing frame work for partitions/ wall lining etc. made of Aluminium Square pipe 80x26x0.5 mm and other section of approved make conforming to IS : 733 and IS : 1283 and shall be smooth, rust free, straight, mitred and jointed mechanically wherever required placed along the walls, ceiling and floor in a grid pattern with spacing @ 100cm centre to centre vertically and @ 40 cm centre to centre horizontally or at required spacing near opening, with necessary welding at junctions and fixing the frame to wall/ ceiling/ floors with steel dash fasteners of 8 mm dia, 75 mm long bolt, including making provision for opening for doors, windows, cable conduits, switch boards etc., all as per direction of Engineer-in-charge | - | kg | 100 | - |
| 2 | Providing and fixing 12 mm thick panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Fire retardant plywood conforming to IS; 5509 | - | sqm | - | - |
| 3 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. - 1.5 mm thick | - | sqm | - | - |
| 4 | Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991, in true horizontal level suspended on inter-locking metal powder coated T-Grid of hot dipped galvanised iron section of 0.40 mm thick on Silhouette profile,rotary stiched double webbed white with 6 mm reveal profile (white/ black),comprising of main-T runners of size 15x42 mm of length 3000 mm, cross - T of size 15x42 mm of length 1200 mm and secondary intermediate cross-T of size 15x42 mm of length 600 mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.With 15 mm thick integral densified micro edge light weight calcium silicate false ceiling tiles | - | sqm | - | - |
| 5 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Double charge vitrified tile polished finish of size Size of Tile 600 x 600 mm | - | sqm | - | - |
| 6 | Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) bedding in laying of floor tiles and jointing with grey cement slurry @ 3.3 kg/ sqm. | - | Sqm | - | - |
| 7 | Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. | - | Sqm | - | - |
| 8 | Providing and fixing anti static mat Class A ,2 mm thick as per direction of Engineer in Charge | - | Sqm | - | - |
| 9 | White washing with lime to give an even shade :Old work (two or more coats) | - | Sqm | - | - |
| 10 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour One coat | - | Sqm | - | - |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.19 MB
tenderdocument.pdf
Tender Documents • 4.16 MB
BOQ_321357.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .