RENOVATION OF HARYANA AGRO MALL, PANIPAT FOR MC OFFICE BUILDING PANIPAT UNDER MC PANIPAT

Amount

Supply, Installation , Testing, Commissioning and Handling over of 13 Passenger Elevator (Not less than 884 kg) Gear less elevator having speed of 1 meter per second Serving different floors in the existing lift shaft as per specification of the tender document complete in all respect as per Satisfaction of Engineer-in-charge including obtaining permission from concerned Govt regulatory/ authority with following specs

Supply, Installation, Testing and Commissioning of IP Network TDN Low-Light IR Rugged Dome Camera, 1/2.7` CMOS, 2 MP @ 25fps or better, triple stream,Min. Illumination required 0.01 lux @ F1.4 (color), 120dB True WDR, Min. Pixels 1920 × 1080, triple stream, 7–22 mm motorized focus and zoom lens, BLC, HLC, 3DNR, Privacy Mask, 3 IR LEDs Smart IR with upto 50m IR distance, Dual channel Audio G.711a/G.711u/AAC, 128GB SD card support, Alarm: 2 In/ 1out, PoE, H.264 High Profile and MJPEG, PoE Class 3 and 12V DC, IP 67, IK 10 vandal proof, Having Operating temp range : –40°C to 60° C. Certifications: ONVIF Profile S and Profile G compliant, UL, CSA 60950-22, CE (EN 50130-4 and EN 55022) , FCC Part 15 and RoHS compliant. Make Honeywell or Pelco or Axis

Supply, Installation, Testing and Commissioning of IP Network TDN Low-Light IR Bullet/ Box Camera, 1/2.7` CMOS, 2 MP @ 25fps or better, triple stream, Min. Illumination required 0.01 lux @ F1.4 (color), 120dB True WDR, Min. Pixels 1920 × 1080, triple stream, 5–50 mm motorized focus and zoom lens, BLC, HLC, 3DNR, Privacy Mask, 4 IR LEDs Smart IR with upto 60m IR distance, Dual channel Audio G.711a/G.711u/AAC, 128GB SD card support, Alarm: 2 In/ 1out, PoE, H.264 High Profile and MJPEG, PoE Class 3 and 12V DC, IP 67, IK 10 vandal proof, Having Operating temp range : –40°C to 60° C. Certifications: ONVIF Profile S and Profile G compliant, UL, CSA 60950-22, CE (EN 50130-4 and EN 55022) , FCC Part 15 and RoHS compliant. Make Honeywell or Pelco or Axis

Supply, Installation, Testing and Commissioning of IP Network TDN Low-Light IR Long PTZ Camera with Wiper and auto tracking, 1/1.9` CMOS, 2 MP @ 25fps, triple stream, Min. Illumination required 0.005 lux @ F1.6 (color) and 0.0005 lux @ F 1.6(B/W), 120dB True WDR, Min. Pixels 1920 × 1080, triple stream, 6mm –180 mm 30x motorized focus and zoom lens, BLC, HLC, 3DNR, Defog, Electronic Image Stabilitzation, Privacy Mask, IR range with upto 150m IR distance, Dual channel Audio G.711a/G.711u/AAC, 128GB SD card support, Alarm: 7 In/ 2 out, PoE, H.264 High Profile and MJPEG, PoE Class 5 and 12V DC/24VAC, IP 67, Speed Controlled Wiper for cleaning rain water and dust,Having Operating temp range : –40°C to 70° C. Certifications: ONVIF Profile S compliant, UL, CSA 60950-22, CE (EN 50130-4 and EN 55022) , FCC Part 15 and RoHS compliant.Make Honeywell or Pelco or Axis

Supply, Installation, Testing and Commissioning of Industrial grade HUS Network Video Recorder : 64CH @ 1080P / 64CH @ 720P HUS NVR, Upto 12 HDD bays with 48TB, RAID 0,1,5,6,10:Hot Swap, 1 SAS, 2 1000M Ports, ONVIF, N plus 1 Redundancy, NFR with Camera, Dual Power, Dual Ethernet Port, 1Gbps throughput Make Honeywell or Pelco or Axis

Ultrakey Lite, Maxpro Control keyboard with function key, joystick, LED display Make Honeywell or Pelco or Axis

Supply, installation, testing and commissioning of Layer 2 ,24 Port 10/100/1000 Base T POE plus and 2 no of 2G Fiber Port,Manageable Switch with POE budget of 75W with SFP Module Cost, inclusive of LIU and LC couplers, plates, mounts, etc required for commissioning Make Cisco/ Allied/ D-Link/ Enterasys

Supply, installation, Testing and Commissioning of Armourd cat-6 UTP cable with all accessories complete as required.

SITC of 2 core*1.5sqmm FRLS unarmoured power cable with all accessories complete as required.

19` 42U APW President Rack with glass front door, steel rear door, power supply, MCB, cable manager, drawer shelves and wiring channels to accommodate CCTV systems equipment and accessories as mentioned in the BOQ above and including all connections and terminations as required.

Supply installation testing and commissioning of 7-zone controller.(Server)

Supply installation testing and commissioning of 15Watts Horn Speaker for car parking area

Supply installation testing and commissioning of 6Watts Ceiling Speaker.

Supply installation testing and commissioning of system server software.

Supply Installation testing and commissioning of microphone

Supply Installation testing and commissioning of Amplifier as per following description

Supply Installation testing and commissioning of 2Cx1.5 Sq mm Copper cable for PA system

Supply, installation, testing and commissioning of Multimedia Projector with LCD Technology, Brightness : 3000 ANSI Lumens or higher, Min Resolution : XGA, Short Throw Lens, Contrast Ratio: 3000:1, Lamp Life : 10000 Hrs (Eco Mode) Sharp/ Jteson/ Leviton

SITC of Local fire authority approved Diesel Engine driven Pump suitable for automatic operation as per discharge defined beolw consisting of the following details given as A, B, C, D, E and F . (A) Horizontal Single / Multi stage Centrifugal End suction, back pull type pump complete for delivery of below mentioned discharge complete with necessary flexible pipe, Butterfly valve on the suction side ( all items to be matching with the suction side dia of the pump) and pressure gauge ,Butterfly valve and non return valve on the delivery side side ( all items to be matching with the delivery side dia of the pump) and including bypass arrangement for Testing of pump (B) Material of construction : Pump Casing - Cast Iron, Impellor - Bronze, Shaft - SS 410, Packing - Mechanical Seal (C)Pump shall be capable of furnishing not less than 150 % of rated capacity at a head not less than 65 % of the rated head. The shut off head shall not exceed 120 % of rated head (D) Radiator cooled Diesel Engine developing suitable BHP for the below mentioned discharge at 1500 / 1800 RPM, flexible coupling and coupling guard with the Pump, common bed plate for mounting of the Engine and Pump,Antivibration damping arrangement by cushy foot, Diesel Engine starting Panel for starting of the engine automatically if the Normal electrical supply fails with a unit of battery bank of 12/24v,180 Ah, Lead Acid Battery with Boost / Trickle charger as required for operation of Diesel engine, Exhaust Pipe of suitable diameter minimum 10 M length, with muffler, day oil tank of 300 1ts capacity with first charge and hand operated oil pumping set, (E) Pump is to be inspected by third party like RITES / PDIL at manufacturer`s premises and inspection report is to be submitted. (F) Suitable cement concreat foundation duly plastered with anti vibration pads. 2280 LPM suitable for 88 Mtr Head, multi stage, 1500 RPM

SITC of Local fire authority approved Vertical multistage Jockey pump with SS Body, SS impellor, SS shaft, mechanical seal coupled with Squirrel cage induction motor for automatic operation suitable for three phase, 415 V, 50 Hz AC supply with synchronous speed of 2900 RPM ,T.E.F.C type confirming to IP:55 with flexible coupling and coupling guard with the pump ,Common bed plate fabricated from mild steel channel , Suitable cement concreat foundation duly plastered with anti vibration pads.

SITC of pressure switches for Main, Jockey pump and standby Diesel pumps, including necessary wiring upto control panel and Ball valve.

Supplying and fixing air vessel of continuous welded construction for pump room made of 450 mm dia,fabricated out of 10 mm thick dished ends and 8 mm thick MS sheet, 2000 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia Gun Metal wheel valve, with required accessories, pressure gauge and painting with two coats of Red Oxide and two coat of post office red enamel paint as required.

Providing, installation, testing and commissioning of stainless steel strainer of dia given below fabricated out of 1.6 mm. thick stainless steel sheet with 3 mm. dia holes with stainless steel flange of following sizes.150 mm dia

Supplying and fixing, testing and commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze /gun metal seat ISI marked complete with nuts, bolts, washers, gaskets, conforming to IS 780 of following sizes as required.150mm dia

SandF following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required including cutting the wall, covering conduit and making good the same as required.

Providing/Laying P.V.C. / XLPE insulated and P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I / IS :7098 P - I of Group 1 of approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size. 3.5C x 25.0 Sq.mm 3.5C x 120.0 Sq.mm

Providing/Laying P.V.C. / XLPE insulated and P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I / IS :7098 P - I of Group 1 of approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size. 3.5C x 120.0 Sq.mm

Supplying and Laying following size earth wire/strip in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required. 8 SWG GI Wire

Supplying, Installation, Testing and Commissioning submersible type dewatering pump of stainless steel / Noryl casing and impellor of discharge and head given below complete with base plate and all accessories suitable for operation on 230 V, single phase/415 V /3 phase, 50 Hz. AC supply complete with starter for automatic operation including water level sensing device / float switch inter connection with submersible cable etc. as required. 180 LPM with 10 mtr head

Supplying and fixing Gun metal single headed Internal / external yard hydrant valve with 1 No. 63 mm dia instantaneous Gun metal coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal cap and chain as required.

Supplying and fixing of Hose Cabinet of size 750 mm x 600 mm x 250 mm made of 1.6 mm thick MS sheet with 6 mm thick glazed glass doors including necessary locking arrangement suitable to accommodate external hydrant with butterfly valve, 2 Nos 15 Mtr. Long Hose pipe, 1 No. branch pipe, mounted on wall OR raised brick platform and duly painted with post office red externally and white internally with synthetic enamel paint complete in all respect, for external hydrant, as required.

Supplying and fixing Fire Brigade Connection of CI body with Gun Metal male instantaneous inlet couplings complete with cap and chain as required for 150mm dia MS pipe connection, conforming to IS 904 as required of following way : 2 Way (for Drawout )

Providing and fixing of 4 way suction coupling for fire brigade withdrawal of water from fire tank with 150mm dia pipe and foot valve.

Supplying and fixing 63 mm dia, 15 mtr. Long RRL hose pipe with 63 mm dia male and female Gun metal couplings duly binded with GI wire, rivets etc. conforming to IS 636 (type-A) as required.

Providing and fixing 100mm dia bourden type, Stainless steel dial type pressure Gauge (0 - 16 Kg ) range, 3 / 8 ` BSP bottom entry on Pump Delivery Line complete with Ball valve

Supplying and fixing first -Aid hose reel wall mounted swinging type with MS construction spray painted in post office Red, conforming to IS 884 with upto date amendments, complete with the following as required.(A) 30 m long 20 mm (nominal internal) dia water hose Thermoplastic (Textile reinforced) Type -2 as per IS: 12585 (B)20 mm (nominal internal) dia gun metal globe valve and nozzle.(C)Drum and brackets for fixing the equipments on wall.(D) Connections from riser with 40 mm dia stop valve (gun metal) and M.S. pipe

Supply and Fixing of Fire Man`s Axe with heavy Insulated rubber tested up to 20 KV and confirming to IS :926

Providing, laying, testing and Commissioning of `C` class heavy duty MS pipe conforming to IS 3589 / 1239 for hydrent and sprinkler applications including fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. fixing the pipe on the wall/ceiling with suitable clamps and including painting of two coats of Red Oxide , painting with two or more coats of synthetic enamel paint of Post office red shade complete as required.The installation includes all civil openings ,breakages and making good the same. 25 mm dia

Providing, laying, testing and Commissioning of `C` class heavy duty MS pipe conforming to IS 3589 / 1239 for hydrent and sprinkler applications including fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. fixing the pipe on the wall/ceiling with suitable clamps and including painting of two coats of Red Oxide , painting with two or more coats of synthetic enamel paint of Post office red shade complete as required.The installation includes all civil openings ,breakages and making good the same. 40 mm dia

Providing, laying, testing and Commissioning of `C` class heavy duty MS pipe conforming to IS 3589 / 1239 for hydrent and sprinkler applications including fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. fixing the pipe on the wall/ceiling with suitable clamps and including painting of two coats of Red Oxide , painting with two or more coats of synthetic enamel paint of Post office red shade complete as required.The installation includes all civil openings ,breakages and making good the same. 65 mm dia

Providing, laying, testing and Commissioning of `C` class heavy duty MS pipe conforming to IS 3589 / 1239 for hydrent and sprinkler applications including fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. fixing the pipe on the wall/ceiling with suitable clamps and including painting of two coats of Red Oxide , painting with two or more coats of synthetic enamel paint of Post office red shade complete as required.The installation includes all civil openings ,breakages and making good the same. 80 mm dia

Providing, laying, testing and Commissioning of `C` class heavy duty MS pipe conforming to IS 3589 / 1239 for hydrent and sprinkler applications including fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. fixing the pipe on the wall/ceiling with suitable clamps and including painting of two coats of Red Oxide , painting with two or more coats of synthetic enamel paint of Post office red shade complete as required.The installation includes all civil openings ,breakages and making good the same. 150 mm dia

Providing, laying, testing and Commissioning of `C` class heavy duty MS pipe conforming to IS 3589 / 1239 for hydrent and sprinkler applications including fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. fixing the pipe on the wall/ceiling with suitable clamps and including painting of two coats of Red Oxide , painting with two or more coats of synthetic enamel paint of Post office red shade complete as required.The installation includes all civil openings ,breakages and making good the same. 200 mm dia, 6.0 mm thick

Providing, installation, testing and commissioning of dual plate non-return valve of following sizes confirming to IS:5312 complete with rubber gasket, G I bolts, nuts, washers etc. as required. 80 mm dia

Providing, installation, testing and commissioning of dual plate non-return valve of following sizes confirming to IS:5312 complete with rubber gasket, G I bolts, nuts, washers etc. as required. 150 mm dia

`Supplying, fixing, testing commissioning of butterfly valve PN 1.6, with Bronze/ Gunmetal seat duly ISI marked complete with Nuts, Bolts, washers, gaskets, conforming to IS 13095, of following sizes as required. ` 80 mm dia

`Supplying, fixing, testing commissioning of butterfly valve PN 1.6, with Bronze/ Gunmetal seat duly ISI marked complete with Nuts, Bolts, washers, gaskets, conforming to IS 13095, of following sizes as required. ` 150 mm dia

Providing, installation, testing and commissioning of Brass ball valves of following sizes as required. 25 mm dia.

Providing, fixing, testing and commissioning of 15 mm dia size ,quartzoid bulb sprinkler heads suitable for 68 degree centigrade rating of the following type : Pendant type

Supply and Fixing ISI marked ( IS : 15683 ) Poratable Fire Exitnguisher,Trolley mounted Mech. Foam type capacity 09 ltrs with gun-metal cap and nozzle and complete respects in all respects including initial fill and wall suspension.

Supply and Fixing ISI marked ( IS : 15683 ) Portable fire Extinguisher, Carbon-dioxide type flat base including valve, discharge hose of not less than 10 mm dia. min. 600 mm long and complete in all respects including initial fill with C02 gas confirming to IS:307-1966 filled to a filling ratio of not more than 0.667and wall suspension bracket. Capacity 4.5 Kg.

SITC of 4 loop Multi loop Microprocessor based intelligent and modular, 100% electronically addressable system where field device addressing is done by panel and not user, complete touch screen system with peer to peer networking of 126 network nodes, loop capacity of 200 devices per loop, built in charger and 2x9AH battery which is sealed lead scid rechargable maintenance free type that can support backup upto 24hours idle condition and 15 minutes during alarm condition, with Zonal LEDs on board, capacity to have upto 250 logic zones created, Touch LCD screen display with LED technology, 4 NAC circuits, 3 programmable relays, dedicated Alarm relay, Integral short circuit, Event history on 9999 logs, option to load Logo on the main screen, view live analog level of field devices on the panel screen, option to download these events log and analog level report from panel, 3 detector sensitivity levels, option to change the operating temperature of heat detectors from panel, option to change the volume and tone of loop powered base sounders from panel, Alarm verification option, T1/T2 timer option, field outputs modules programmable with 3 stage program options, have open path programming software, capacity to communicate loop mount repeater panels, optional NAC power supply units that are loop mountable and 100% supervised from main panel.

SITC of Active repeater panel with function keys flike Reset, Alarm Acknowledge, Alarm Silence, Trouble Acknowledge on panel itself etc. as per specification.

SITC of Addressable type manual fire alarm boxes (MCP/Pull Station ) shall, on command from the control panel, send data to the panel representing the state of the manual switch and the addressable communication module status. Manual fire alarm boxes shall be constructed of Lexan with clearly visible operating instructions provided on the cover. The word FIRE shall appear on the front of the stations in raised letters, 1.75 inches (44 mm) or larger. etc. as required.

SITC of Addressable 2 wire optical Smoke detector, 100% soft addressing, single LED that covers 360Deg lightpipe technology with intensity that can handle upto 5000 Lux, Discreet design for incorporation into any décor, Common mounting base, Drift compensation, Removable detector chamber, Chamber monitoring by panel, option to connect remote indicator.

SITC of Addressable Ultraviolet Flame detector 2 wire 3 sensitivity levels, dust proof, damp proof and corrosion proof having IP21 rating. Discreet design for incorporation into any décor, Common mounting base, Drift compensation, Removable detector chamber, Chamber monitoring by panel, option to connect remote indicator.

SITC of Base mount short circuit isolator, to be used as a detector base. Capability to automatically resume after short circuit is removed, load ability upto 32 devices. Chamber monitoring by panel, option to connect remote indicator.

SITC of 2CORE 1.5SQMM FRLS FLEXIBLE COPPER CABLE SAFETY SIGNAGE

Supply and Fixing of signs Auto-Glo, (list of design attached), based on acrylic, single sided wall pasted size 12” x 6” HVAC

Supply, Installation, testing and commissioning of Hi Wall mounted type / Ceiling Concealed type / Floor mounted type /Ductable type indoor units having galvanized steel plate casing. The unit shall be insulated with sound absorbing thermal insulation material, Polystyrene / Polyethylene foam. The unit shall be supplied with suitable decorative panel and resin net filter with Mold resistance. The unit shall be supplied with drain hose, clamp metal, washer fixing plate, sealing pads, screws, clamps, washer for hanging bracket and insulation for fitting. 5.5 TR/3595 CMH Ductable Unit

Supply, Installation, testing and commissioning of Hi Wall mounted type / Ceiling Concealed type / Floor mounted type /Ductable type indoor units having galvanized steel plate casing. The unit shall be insulated with sound absorbing thermal insulation material, Polystyrene / Polyethylene foam. The unit shall be supplied with suitable decorative panel and resin net filter with Mold resistance. The unit shall be supplied with drain hose, clamp metal, washer fixing plate, sealing pads, screws, clamps, washer for hanging bracket and insulation for fitting. 8.0 TR/3595 CMH Ductable Unit

Supply, Installation, testing and commissioning of Hi Wall mounted type / Ceiling Concealed type / Floor mounted type /Ductable type indoor units having galvanized steel plate casing. The unit shall be insulated with sound absorbing thermal insulation material, Polystyrene / Polyethylene foam. The unit shall be supplied with suitable decorative panel and resin net filter with Mold resistance. The unit shall be supplied with drain hose, clamp metal, washer fixing plate, sealing pads, screws, clamps, washer for hanging bracket and insulation for fitting. 2 TR/1031 CMH Cassette Unit (Including cordless remote controller)

Supply, Installation, testing and commissioning of Hi Wall mounted type / Ceiling Concealed type / Floor mounted type /Ductable type indoor units having galvanized steel plate casing. The unit shall be insulated with sound absorbing thermal insulation material, Polystyrene / Polyethylene foam. The unit shall be supplied with suitable decorative panel and resin net filter with Mold resistance. The unit shall be supplied with drain hose, clamp metal, washer fixing plate, sealing pads, screws, clamps, washer for hanging bracket and insulation for fitting. 2.5 TR/1236 CMH Cassette Unit (Including cordless remote controller)

Supply, Installation, testing and commissioning of Hi Wall mounted type / Ceiling Concealed type / Floor mounted type /Ductable type indoor units having galvanized steel plate casing. The unit shall be insulated with sound absorbing thermal insulation material, Polystyrene / Polyethylene foam. The unit shall be supplied with suitable decorative panel and resin net filter with Mold resistance. The unit shall be supplied with drain hose, clamp metal, washer fixing plate, sealing pads, screws, clamps, washer for hanging bracket and insulation for fitting. 1.5 TR /860 CMH Hi-wall Split Unit (Including cordless remote controller)

Supply, Installation, testing and commissioning of Hi Wall mounted type / Ceiling Concealed type / Floor mounted type /Ductable type indoor units having galvanized steel plate casing. The unit shall be insulated with sound absorbing thermal insulation material, Polystyrene / Polyethylene foam. The unit shall be supplied with suitable decorative panel and resin net filter with Mold resistance. The unit shall be supplied with drain hose, clamp metal, washer fixing plate, sealing pads, screws, clamps, washer for hanging bracket and insulation for fitting. 2 TR / 780 CMH Hi-wall Split Unit (Including cordless remote controller)

Supply,, Installation, testing and commissioning of Compact Air Cooled type outdoor units of VRV system having hermetically sealed scroll type compressors and separate 1# inverter compressor, condenser coil fabricated from Seamless Copper tube and Plate type Al. Fins of Multi Row with “Anti Corrosive” treatment (Blue Fins), Axial Flow, upward throw condenser fan, Condenser fan - motor unit, insulated refrigeration piping, power / control wiring, and earthing, external wiring between Indoor and Outdoor units, all system controls-safety. The outdoor unit shall be pre charged with first charge of R 410A refrigerant. etc. complete as per Technical Specifications and drawing. Each Outdoor units with High Pressure switch, Fan driver overload protector, Over current relay, Inverter Overload Protector and Fusible Plug. The unit shall be suitable for 415 ± 10 % volts, 50 Hz, 3 phase AC supply, and IP 55 protection. 26 HP

Supply,, Installation, testing and commissioning of Compact Air Cooled type outdoor units of VRV system having hermetically sealed scroll type compressors and separate 1# inverter compressor, condenser coil fabricated from Seamless Copper tube and Plate type Al. Fins of Multi Row with “Anti Corrosive” treatment (Blue Fins), Axial Flow, upward throw condenser fan, Condenser fan - motor unit, insulated refrigeration piping, power / control wiring, and earthing, external wiring between Indoor and Outdoor units, all system controls-safety. The outdoor unit shall be pre charged with first charge of R 410A refrigerant. etc. complete as per Technical Specifications and drawing. Each Outdoor units with High Pressure switch, Fan driver overload protector, Over current relay, Inverter Overload Protector and Fusible Plug. The unit shall be suitable for 415 ± 10 % volts, 50 Hz, 3 phase AC supply, and IP 55 protection. 40 HP

Supply and Installation of suction and discharge Seamless heavy gauge Copper piping of adequate size duly insulated with 19mm / 13mm thk. Nitrile Rubber Insulation. Refrigeration piping will have to be taken in the piping rack / Support / Cable Tray individually connecting to all indoor units for the respective floors. Pipe work shall include Even necessary connections, tees, reducers, supports, clamps, fittings, valves and ref. joints (Y joints) where ever required will be included. 6.4mm dia

Supply and Installation of suction and discharge Seamless heavy gauge Copper piping of adequate size duly insulated with 19mm / 13mm thk. Nitrile Rubber Insulation. Refrigeration piping will have to be taken in the piping rack / Support / Cable Tray individually connecting to all indoor units for the respective floors. Pipe work shall include Even necessary connections, tees, reducers, supports, clamps, fittings, valves and ref. joints (Y joints) where ever required will be included. 9.5mm dia

Supply and Installation of suction and discharge Seamless heavy gauge Copper piping of adequate size duly insulated with 19mm / 13mm thk. Nitrile Rubber Insulation. Refrigeration piping will have to be taken in the piping rack / Support / Cable Tray individually connecting to all indoor units for the respective floors. Pipe work shall include Even necessary connections, tees, reducers, supports, clamps, fittings, valves and ref. joints (Y joints) where ever required will be included. 12.7mm dia

Supply and Installation of suction and discharge Seamless heavy gauge Copper piping of adequate size duly insulated with 19mm / 13mm thk. Nitrile Rubber Insulation. Refrigeration piping will have to be taken in the piping rack / Support / Cable Tray individually connecting to all indoor units for the respective floors. Pipe work shall include Even necessary connections, tees, reducers, supports, clamps, fittings, valves and ref. joints (Y joints) where ever required will be included. 28.6mm dia

Supply and Installation of suction and discharge Seamless heavy gauge Copper piping of adequate size duly insulated with 19mm / 13mm thk. Nitrile Rubber Insulation. Refrigeration piping will have to be taken in the piping rack / Support / Cable Tray individually connecting to all indoor units for the respective floors. Pipe work shall include Even necessary connections, tees, reducers, supports, clamps, fittings, valves and ref. joints (Y joints) where ever required will be included. 34.9mm dia

Supply and Installation of suction and discharge Seamless heavy gauge Copper piping of adequate size duly insulated with 19mm / 13mm thk. Nitrile Rubber Insulation. Refrigeration piping will have to be taken in the piping rack / Support / Cable Tray individually connecting to all indoor units for the respective floors. Pipe work shall include Even necessary connections, tees, reducers, supports, clamps, fittings, valves and ref. joints (Y joints) where ever required will be included. 41.3mm dia

Supply and Installation of suction and discharge Seamless heavy gauge Copper piping of adequate size duly insulated with 19mm / 13mm thk. Nitrile Rubber Insulation. Refrigeration piping will have to be taken in the piping rack / Support / Cable Tray individually connecting to all indoor units for the respective floors. Pipe work shall include Even necessary connections, tees, reducers, supports, clamps, fittings, valves and ref. joints (Y joints) where ever required will be included. 44.5mm dia

Refrigerant R 410 gas for excess Copper Piping for all circuits for entire system.

Supply and Laying of copper shielded armoured Communication/Control Cabling with end termination between Outdoor Units and Indoor Units, Communication cabling between the individual controllers to the main central controller with PVC conduits or Cable Trays if required, necessary supports, Plug Top, Earthing connection etc. as per site requirement in an approved manner complete as per Technical Specifications and drawing.

Providing and fixing in position the following Rigid PVC condensate drain pipes cut to required lengths and necessary elbows, tees and reducers, hanger, supports, fittings and with 9 mm thk. Nitrile Rubber Insulation as per drawing. Quoted price shall be inclusive of adhesive, nitrile rubber tape etc. as per specification and drawing. 32mm dia

Providing and fixing in position the following Rigid PVC condensate drain pipes cut to required lengths and necessary elbows, tees and reducers, hanger, supports, fittings and with 9 mm thk. Nitrile Rubber Insulation as per drawing. Quoted price shall be inclusive of adhesive, nitrile rubber tape etc. as per specification and drawing. 25mm dia

Supply, fabrication, Installation, and testing of sheet metal ducts complete with all accessories like flanges, all necessary MS supports with epoxy Painting, suspension rods , anchor bolts, GI bolts and nuts, canvas connections , adjustable splitter , guide vanes including air balancing with necessary connections etc., in accordance with the approved shop drawings and as per the specifications : 24 G galvanized sheet steel

Supply, fabrication, Installation, and testing of sheet metal ducts complete with all accessories like flanges, all necessary MS supports with epoxy Painting, suspension rods , anchor bolts, GI bolts and nuts, canvas connections , adjustable splitter , guide vanes including air balancing with necessary connections etc., in accordance with the approved shop drawings and as per the specifications : 22 G galvanized sheet steel

Supply, fabrication, Installation, and testing of sheet metal ducts complete with all accessories like flanges, all necessary MS supports with epoxy Painting, suspension rods , anchor bolts, GI bolts and nuts, canvas connections , adjustable splitter , guide vanes including air balancing with necessary connections etc., in accordance with the approved shop drawings and as per the specifications : 20 G galvanized sheet steel

Supply, fabrication, Installation, and testing of sheet metal ducts complete with all accessories like flanges, all necessary MS supports with epoxy Painting, suspension rods , anchor bolts, GI bolts and nuts, canvas connections , adjustable splitter , guide vanes including air balancing with necessary connections etc., in accordance with the approved shop drawings and as per the specifications : 18 G galvanized sheet steel

Supply, fabrication, Installation and testing of flexible connections constructed of flexible double canvas sleeve with necessary mounting arrangement, flanges, nuts and bolts etc. in accordance with approved shop drawings and as per the specifications Refrigerant R 410 gas for excess Copper Piping for all circuits for entire system.

Supply, Installation, testing and balancing of Supply Air Duct dampers fabricated from G.I Sheet, duly painted with synthetic enamel paint and to be provided with suitable links and quadrants for control of volume of air. in accordance with the approved shop drawings and specifications.

Supply, Installation, Testing and Commissioning of UL listed Fire and smoke dampers with actuator, transformer, Panel for the size given under Upto 0.3 sqm

Supply, Installation, Testing and Commissioning of UL listed Fire and smoke dampers with actuator, transformer, Panel for the size given under From 0.3 sqm to 0.6 sqm

Supply and Installation of GSS Louvers with bird screen, adjustable damper for fresh air and without damper for exhaust air complete with aluminum wire mesh bird screen in accordance with the approved shop drawings and specifications.

Supplying, Installing, Testing and Commissioning of extruded aluminum powder coated exhaust grilles 0/15/45 degree blade angle of approved shade and make as per specifications including any framework required for fixing of linear grilles.

Powder coated, extruded aluminium Diffuser in as required and as shown in the drawings. With Damper

Powder coated, extruded aluminium Diffuser in as required and as shown in the drawings. Without Damper

Supply, Installation and Balancing of opposed blade box type volume control dampers in Supply air duct collars as per approved drawings and specifications.

Supply, Installation, Testing and Commissioning of Constant Airflow Regulator (CAR) as specified suitable for : 50 CFM - 100 CFM

Supply, Installation, Testing and Commissioning of Constant Airflow Regulator (CAR) as specified suitable for : 150 CFM - 250 CFM

Supply and Fixing of Duct liner/Acoustic (Insulation) of specified thickness of 10 mm of ARMA Duct manafactured as per ASTM E 84 test and which should also meet NFPA 90A supplementary materials for air distribution system which should not absorbs less 0.2% water by volume (ASTM c 209), should not support microbial growth (ASTM C1071, G21, G22) and should emit objectionable odors (ASTM C 665) and should have thermal conductivity of 0.27 ( R - 2.78 in 3.4` thickness) and water vapor permeance of 0.10. Class -0 material with sound absorbing capacity and density 150 Kg/cum.

Supply and Installation of Thermal insulation On supply air ducting externally with 13 mm thick Nitrile Insulation with Al. foil having density between 40 to 60 kg/m3 as per approved drawing and specifications. Quoted price shall be inclusive of adhesive, tapes as per specification

`Supply, installing, testing, commissioning and handing over of Axial Fans (min. efficiency 70%) with MS Supports structure to suspend from ceiling sound level - 70db (A) @ 3mtr w/o silencers (The cost of FAN Motor Starter Panel with BMS Connectivity complete with necessary control, indicating OLP.SPP, ON/OFF push Buttons with ON indication, 2 nos, Non Polarised NO-NC contacts for tripping on signal from Fire Dampers/Fire Alarm Panel with all required accessories should also be included in the quoted Price with required cable from starter panel to Fan with max. length of cable considered up to 15 mtr. with end termination. Extra length of cable will be paid as per BOQ rate.) ` Capacity- 8000 CFM - 30 mm TSP

Supply, installing, testing, commissioning and handing over of Inline Fans with necesssary cabling : 1000 CFM, 20 mm SP

Supply, installing, testing, commissioning and handing over of Inline Fans with necesssary cabling : 700 CFM, 20 mm SP

Supply, installing, testing, commissioning and handing over of Inline Fans with necesssary cabling : 550 CFM, 20 mm SP

Supply, installing, testing, commissioning and handing over of Propeller Fans with necesssary cabling : 200 CFM

Supply, fabrication, Installation, and testing of sheet metal ducts complete with all accessories like flanges, all necessary MS supports with epoxy Painting, suspension rods , anchor bolts, GI bolts and nuts, canvas connections , adjustable splitter , guide vanes including air balancing with necessary connections etc., in accordance with the approved shop drawings and as per the specifications : 22 G galvanized sheet steels

Supply, fabrication, Installation, and testing of sheet metal ducts complete with all accessories like flanges, all necessary MS supports with epoxy Painting, suspension rods , anchor bolts, GI bolts and nuts, canvas connections , adjustable splitter , guide vanes including air balancing with necessary connections etc., in accordance with the approved shop drawings and as per the specifications : 24 G galvanized sheets steel

Supply, fabrication, Installation, and testing of sheet metal ducts complete with all accessories like flanges, all necessary MS supports with epoxy Painting, suspension rods , anchor bolts, GI bolts and nuts, canvas connections , adjustable splitter , guide vanes including air balancing with necessary connections etc., in accordance with the approved shop drawings and as per the specifications : 20 G galvanized sheet steels

Supply, fabrication, Installation and testing of flexible connections constructed of flexible double canvas sleeve with necessary mounting arrangement, flanges, nuts and bolts etc. in accordance with approved shop drawings and as per the specifications.

Supply, installation, testing and commissioning of R410/R407Condensing unit of 8.5 TR.

Supply and Installation of suction and discharge Seamless heavy gauge Copper piping of adequate size duly insulated with 13 mm thick

Supplying and Placing Modular table in completely knock down conditions with an overall size 2520 mm X 2520 mm X 1200 mm that is to be assembled at site. The worktop shall have the size 1200mm/600mm X 1200mm/600mm made up of back to back 25mm thick Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The top profile shall be in curvilinear shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. Pullout keyboard trey shall be provided of metal base having size 470mm X 286mm. The trey shall be operated on keyboard channel. The workstation shall have panel based partition of 60mm thick with 1200 mm height and provided at front of the user as well as both side of the user. The framework shall be made of Aluminium alloy extruded profiles. The partition shall have the assembly of top trim, top bar, mid bar, side pole, squirting, raceway and side beading. The entire Aluminium parts shall be pretreated and duly powder coated of 40-50µ dry film thick. All these frame work sections shall be fitted to each other by fasteners of 2mm thick which is properly zinc coated for corrosion resistant. Raceway shall be provided of Aluminium of size 118mm height below the work top as per requirement for inlaying of electrical management and carrying the wire horizontally. The exposed vertical and horizontal faces of the frames shall be snap fitted with side beading and top trims respectively. The top and bottom tile shall be provide at front of the user and below the wroktop respectively. The beading shall have extruded profile and made of PVC. The trims shall be made of aluminium extrusions of size 60mm with 1.5mm thick. The partition shall have concealed wire management capabilities for responsive and safe operations of power, telecommunications and data (LAN) and has separate components for electrical, data and telephone cables having adequate capability of both the vertical and horizontal wire movements. Slots/cutouts shall be given on raceways to fix all electrical and data points. Zinc coated small top support brackets shall be fixed to the partition frame. To protect the wall from kicks, abrasion and serve as a decorative moulding skirting shall be provided at the bottom of the partition. The Workstation shall have 2 nos. of overhead storage unit on partition with an overall size 855mm X 380mm X 400mm. The storage shall be made up of 18mm thick Pre-laminated particle board with 1 shutter. The storage shall be operated with SS handle. Fixed pedestal shall be provided with an overall size 400mm X 450mm X 670mm. The pedestal shall be made up of Pre-laminated particle board of grade II of IS 12823. Pedestal side, back, top, facia shall be 18mm thick and drawer base shall be 9mm thick. The pedestal shall have 3 nos. of drawer i.e. 2 box drawer and 1 filing drawer. The drawer shall be operated with SS handle and easily close and open with the assistance of roller channel and ball bearing channel to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be synchronized locked with one single key. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be provided at bottom. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380.

Providing and fixing laminated wooden paneling consisting of wooden frame of 40mmX75mm of soft wood andcovered with 12 mm thick plywood and 1mm thick laminate as per approved pattern/ grooves including hardware and adhesives required for fixing comp. in all respects.

Supplying and fixing Fire Brigade Connection of CI body with Gun Metal male instantaneous inlet couplings complete with cap and chain as required for 150mm dia MS pipe connection, conforming to IS 904 as required of following ways : 4 Way (for Inlet)

Supply,, Installation, testing and commissioning of Compact Air Cooled type outdoor units of VRV system having hermetically sealed scroll type compressors and separate 1# inverter compressor, condenser coil fabricated from Seamless Copper tube and Plate type Al. Fins of Multi Row with “Anti Corrosive” treatment (Blue Fins), Axial Flow, upward throw condenser fan, Condenser fan - motor unit, insulated refrigeration piping, power / control wiring, and earthing, external wiring between Indoor and Outdoor units, all system controls-safety. The outdoor unit shall be pre charged with first charge of R 410A refrigerant. etc. complete as per Technical Specifications and drawing. Each Outdoor units with High Pressure switch, Fan driver overload protector, Over current relay, Inverter Overload Protector and Fusible Plug. The unit shall be suitable for 415 ± 10 % volts, 50 Hz, 3 phase AC supply, and IP 55 protection. 30 HP

Bidder Name

Amount

IKA FURNITURE (GSTN-06AAEFI5413K1ZG) BID ID -1013810

Krishna Construction Co (GSTN-06AALFK6441Q1ZP) BID ID -1016095

Jaipal Malik Contractor (GSTN-06ASCPS2095M1ZA) BID ID -1016143

IKA FURNITURE

Krishna Construction Co

IKA FURNITURE

Krishna Construction Co