Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹1.2 CrAccepted-Finance C 709 VARDHAMAN APARTMENT MAYUR VIHAR I DELHI 110091 INDIA | EAST | DELHI | 110091 | ₹1.2 Cr | L-1 | Accepted-Finance Quoted lowest Bid |
| 2 | L-2₹1.4 Cr+₹20.1 L (17.2%)Rejected-Finance 1ST 2ND FLOOR PLOT NO 13 C 13 3 RAMA ROAD SIDE INDUSTRIAL AREA NAJAFGARH ROAD WEST DELHI DELHI 110015 | WEST DELHI | DELHI | 110015 | ₹1.4 Cr+₹20.1 L (17.2%) | L-2 | Rejected-Finance Not Quoted lowest Bid |
| 3 | Rejected-Technical 1ST FLOOR RAGHUNATH MARKET NEAR TELEPHONE EXCHANGE PATHANKOT 145001 | PATHANKOT | PUNJAB | 145001 | - | - | Rejected-Technical Not meeting eNIT criteria |
| 4 | Rejected-Technical 146 CP COLONY 7 NO CHOURAHA KALPANA NAGAR MORAR GWALIOR 474006 | GWALIOR | MADHYA PRADESH | 474006 | - | - | Rejected-Technical Not meeting eNIT criteria |
| Sl No | Description | Qty | Unit | REWINDER TECHNO ELECTRICALS L1 | Vardhman Airport Solutions Limited L2 |
|---|---|---|---|---|---|
| 1.00 | Supply, filling and compaction (by tamping rammer) of cold bitumen in around on existing Kerf (of size approx 30 mm width and depth upto 35 mm) (after applying bituminous emulsion) of runway/taxiway at discrete locations including removing & relaying of secondary lead, removing of old existing bitumen & cleaning the area by compressor or other suitable means as required as per direction of Engineer-in-charge. | 1,000 | Mtr | 150 ₹1,50,000 Lowest | 200 ₹2,00,000 |
| 2.00 | Filling the existing Kerf having secondary cables (of approx size up to 40mm deep and 30mm wide) in PQC area with Polysulphide joint sealing compound of approved make conforming to BS-5212-1990 or IS: 11433-1995 including making good the damaged corners of concrete slab where reqd., supplying & inserting the back-up rod of appropriate dia, applying 2 coats of primer compatible with polysulphide, use of masking tape etc. and tooled to give a neat finish to the applied sealant, including removal of old sealing compound, baker rod, cleaning the dust by compressor or other suitable means etc & disposal of scrap material as per direction of Engineer-in-charge. | 13,000 | Mtr | 300 ₹39,00,000 Lowest | 350 ₹45,50,000 |
| 3.00 | Refinishing with concrete of 1:2:4 (1 cement, 2 sand, 4 coarse aggregate) projected surface of existing housing box/ Feeder pillar near approach/runway / taxiway shoulder/apron in soft soil/ Hard surface and needs cements finish on the top of approx size 900mm x 900mm etc., after removing of existing damaged plaster & disposal of debries at a lead of atleast 50 mtrs as reqd as per direction of Enginner-in charge . | 100 | Nos | 1,000 ₹1,00,000 | 960 ₹96,000 Lowest |
| 4.00 | Refinishing with concrete of 1:2:4 (1 cement, 2 sand, 4 coarse aggregate) projected surface of existing housing box near approach/runway / taxiway shoulder/apron in soft soil/ Hard surface and needs cements finish on the top of approx size 600mm x 600mm etc., after removing of existing damaged plaster & disposal of debries at a lead of atleast 50 mtrs as reqd as per direction of Enginner-in charge . | 350 | Nos | 750 ₹2,62,500 Lowest | 960 ₹3,36,000 |
| 5.00 | Supply of cubicle MS transformer housing box/Collar of different sizes made of 6mm thick all around except the top surface which is 10mm thick having suitable nos holes on different side surfaces suitable for 32/40/50mm dia HDPE/DWC pipe (As per site requirement and drawing approved by E.I.C.) etc. | 12,000 | KG | 118 ₹14,16,000 Lowest | 150 ₹18,00,000 |
| 6.00 | SITC of LED Guidance Sign Board of various sizes as per ICAO Annex.14 Vol.I (legends as approved by Engineer-in-Charge) made out of anodized 2mm thick Aluminium frame with suitable angle support with 1.5MM thick Al. backcover, 4 MM thick polycarbonate sheet with glare free face, the letter & symbol should be screen printed on inside of sign face made of self adhesive film of 3M applied on the inside face with required colouring, suitable arrangement shall be made for water tightness & locking arrangement, signboard shall be uniformly internally illuminated with LED lights with 24 V DC converter to achieve illumination level operated on input source 2.5A to 6.6A constant current without flickering including suitable rating isolating transformer, secondary leads, supporting frangible legs & frame, installation on 10 mm thick 1:2:4 CC all around 1 mtr of leg etc. complete as required and as specified. | 32 | Sqmt | 45,000 ₹14,40,000 Lowest | 55,000 ₹17,60,000 |
| 7.00 | SITC of LED Guidance Sign Board of various sizes as per ICAO Annex.14 Vol.I (legends as approved by Engineer-in-Charge) made out of anodized 2mm thick Aluminium frame with suitable angle support with 1.5MM thick Al. backcover, 4 MM thick polycarbonate sheet with glare free face, the letter & symbol should be screen printed on inside of sign face made of self adhesive film of 3M applied on the inside face with required colouring, suitable arrangement shall be made for water tightness & locking arrangement, signboard shall be uniformly internally illuminated with LED lights with 24 V DC converter to achieve illumination level operated on input source 2.5A to 6.6A constant current without flickering including, secondary leads, supporting frangible legs & frame, etc. complete as required and as specified. | 18 | Sqmt | 36,000 ₹6,48,000 Lowest | 55,000 ₹9,90,000 |
| 8.00 | Installation of transformer housing box near approach/runway / taxiway shoulder/apron in soft soil & disposal of debries at a lead of atleast 50 mtrs i/c making 150mm thick cement concrete (1:2:4) all around the box and bottom i/c. providing 10" long 1/2" dia B-class GI pipe at the bottom of the housing box for drainage of water i/c. excavation, alignment, levelling, finishing with cement plaster of projected surface of housing box and needs cements finish on the top etc. as per drawing and as per direction of Enginner-in charge . | 250 | Nos | 1,800 ₹4,50,000 | 1,500 ₹3,75,000 Lowest |
| 9.00 | Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing enclosure of size 350mm x 350 mm (H) made out 6 mm thick MS sheet and top cover 10 mm thick MS sheet (counter shunk fitting, M-10 nuts and bolts.) having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. | 50 | Nos | 6,000 ₹3,00,000 Lowest | 8,500 ₹4,25,000 |
| 10.00 | Supply of cubical Feeder Pillar box of size 0.6 Mtr Width x 0.3 Mtr Depth x 0.45 Mtr Height of MS Sheet 2mm thick Welded structure. i/c 2 Nos. legs of approx 1.0 mtr length made out of 40 mm dia GI/Al. pipe alongwith breakable coupling to make the feeder pillar frangible . Feeder Pillar shall be including 2 Nos. earthing studs on outer side. | 30 | Nos | 9,200 ₹2,76,000 Lowest | 14,500 ₹4,35,000 |
Tender Value
₹1.4 Cr
EMD Value
₹4.1 L
Closing Date
16 Apr 2026, 4:00 pmClosed
AGM EE
SGRDJI Airport Amritsar
Miscellaneous Work Repair work of existing Kerfs filling for Secondary cable and other works in Operational Area at SGRDJ International Airport Amritsar.
2026_AAI_273334_1
AAI/ASR/Engg-E/P/eNIT-15/
Open Tender
Electrical Works
Works
244 days
Amritsar Airport
Please refer Tender documents.
12 documents required · 12 mandatory
₹1,180
₹4.1 L
20 May 2026
28 Mar 2026
17 Apr 2026
28 Mar 2026
16 Apr 2026
28 Mar 2026
28 Mar 2026 - 6 Apr 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Supply, filling and compaction (by tamping rammer) of cold bitumen in around on existing Kerf (of size approx 30 mm width and depth upto 35 mm) (after applying bituminous emulsion) of runway/taxiway at discrete locations including removing & relaying of secondary lead, removing of old existing bitumen & cleaning the area by compressor or other suitable means as required as per direction of Engineer-in-charge. | |||||
| 2Filling the existing Kerf having secondary cables (of approx size up to 40mm deep and 30mm wide) in PQC area with Polysulphide joint sealing compound of approved make conforming to BS-5212-1990 or IS: 11433-1995 including making good the damaged corners of concrete slab where reqd., supplying & inserting the back-up rod of appropriate dia, applying 2 coats of primer compatible with polysulphide, use of masking tape etc. and tooled to give a neat finish to the applied sealant, including removal of old sealing compound, baker rod, cleaning the dust by compressor or other suitable means etc & disposal of scrap material as per direction of Engineer-in-charge. | |||||
| 3Refinishing with concrete of 1:2:4 (1 cement, 2 sand, 4 coarse aggregate) projected surface of existing housing box/ Feeder pillar near approach/runway / taxiway shoulder/apron in soft soil/ Hard surface and needs cements finish on the top of approx size 900mm x 900mm etc., after removing of existing damaged plaster & disposal of debries at a lead of atleast 50 mtrs as reqd as per direction of Enginner-in charge . | |||||
| 4Refinishing with concrete of 1:2:4 (1 cement, 2 sand, 4 coarse aggregate) projected surface of existing housing box near approach/runway / taxiway shoulder/apron in soft soil/ Hard surface and needs cements finish on the top of approx size 600mm x 600mm etc., after removing of existing damaged plaster & disposal of debries at a lead of atleast 50 mtrs as reqd as per direction of Enginner-in charge . | |||||
| 5Supply of cubicle MS transformer housing box/Collar of different sizes made of 6mm thick all around except the top surface which is 10mm thick having suitable nos holes on different side surfaces suitable for 32/40/50mm dia HDPE/DWC pipe (As per site requirement and drawing approved by E.I.C.) etc. | |||||
| 6SITC of LED Guidance Sign Board of various sizes as per ICAO Annex.14 Vol.I (legends as approved by Engineer-in-Charge) made out of anodized 2mm thick Aluminium frame with suitable angle support with 1.5MM thick Al. backcover, 4 MM thick polycarbonate sheet with glare free face, the letter & symbol should be screen printed on inside of sign face made of self adhesive film of 3M applied on the inside face with required colouring, suitable arrangement shall be made for water tightness & locking arrangement, signboard shall be uniformly internally illuminated with LED lights with 24 V DC converter to achieve illumination level operated on input source 2.5A to 6.6A constant current without flickering including suitable rating isolating transformer, secondary leads, supporting frangible legs & frame, installation on 10 mm thick 1:2:4 CC all around 1 mtr of leg etc. complete as required and as specified. | |||||
| 7SITC of LED Guidance Sign Board of various sizes as per ICAO Annex.14 Vol.I (legends as approved by Engineer-in-Charge) made out of anodized 2mm thick Aluminium frame with suitable angle support with 1.5MM thick Al. backcover, 4 MM thick polycarbonate sheet with glare free face, the letter & symbol should be screen printed on inside of sign face made of self adhesive film of 3M applied on the inside face with required colouring, suitable arrangement shall be made for water tightness & locking arrangement, signboard shall be uniformly internally illuminated with LED lights with 24 V DC converter to achieve illumination level operated on input source 2.5A to 6.6A constant current without flickering including, secondary leads, supporting frangible legs & frame, etc. complete as required and as specified. | |||||
| 8Installation of transformer housing box near approach/runway / taxiway shoulder/apron in soft soil & disposal of debries at a lead of atleast 50 mtrs i/c making 150mm thick cement concrete (1:2:4) all around the box and bottom i/c. providing 10" long 1/2" dia B-class GI pipe at the bottom of the housing box for drainage of water i/c. excavation, alignment, levelling, finishing with cement plaster of projected surface of housing box and needs cements finish on the top etc. as per drawing and as per direction of Enginner-in charge . | |||||
| 9Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing enclosure of size 350mm x 350 mm (H) made out 6 mm thick MS sheet and top cover 10 mm thick MS sheet (counter shunk fitting, M-10 nuts and bolts.) having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. | |||||
| 10Supply of cubical Feeder Pillar box of size 0.6 Mtr Width x 0.3 Mtr Depth x 0.45 Mtr Height of MS Sheet 2mm thick Welded structure. i/c 2 Nos. legs of approx 1.0 mtr length made out of 40 mm dia GI/Al. pipe alongwith breakable coupling to make the feeder pillar frangible . Feeder Pillar shall be including 2 Nos. earthing studs on outer side. | |||||
stage.html
html • 0.04 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.38 MB
Tender.pdf
Tender Documents • 8.11 MB
BOQ_319041.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .