Loading
Loading…
Loading…
Tender ID
Tender Value
Refer Docs
Closing Date
6 Mar 2026, 3:00 pmClosed
Single Packet
Normal Tender
No
Itemwise/Consigneewise
Lowest to Highest
CONSIGNEE
Not Applicable
Expenditure
General
PUR ENM
1 condition
Offers from the firms, which do not have a valid GSTIN will not be entertained. Firm has to submit their GST registration details.
24 conditions · 1 needing a document upload
Compliance of Make In India Policy:- (1). Where sufficient local capacity is available: Under make in India policy of GOI where sufficient local capacity is available for the tendered items, offers with local contents less than 60% shall be summarily rejected without giving any reason. (2). Where sufficient local capacity is not available: (i) As per make in India policy of GOI where sufficient local capacity is not available for the tendered items, offers with local contents less than 20% shall be summarily rejected and will not be evaluated for further decision. (ii) As per make in India policy of GOI offers with local contents more than 60% shall be given purchase preference (margin of purchase preference will be 20%).
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The bidder confirms that Rates and other financial terms quoted in relevant columns of financial bid will only be ruling terms for acceptance , and such terms quoted anywhere else should be ignored. [Denial of this condition not recommended]
The bidder agrees to supply the tendered stores at the rates quoted by him in accordance with the IRS Conditions of Contract and [or] special Conditions and [or] other Conditions specified/attached with the tender.
Bidders have to submit the certificate for compliance of restrictions in regard to procurement from the bidders from countries sharing land borders with India (as per Annexure attached)
The bidder agrees to supply the tendered stores at the rates quoted by him in accordance with the DMRC tender.
GST and Discount should be quoted separately. Offers will be evaluated inclusive of all taxes quoted by the firm.
1 location across Delhi · 8 Numbers total
Procurement of Electrical items.
ENM11028582A
ENM11028582A
Limited - Indigenous
Goods
Delhi
₹0
Exempted
6 Mar 2026
20 Feb 2026
1 item · 8 Numbers total
WATER LELVEL SENSOR(TANK)WITHOUTTLCCONTR General Specifications Of MM N0-4 6200011 Water Level Sensor(Tank) without TLC Controller 1. LengthofWire:8 Meters The sensor com es with an 8-meter long wire for connecting to a control system. 2. Service: SuitableforRaw,Effluent,a ndWasteWater - This sensor is designed to be used in various types of water,including raw water,effl uent,and waste water. 3. FloatType:Float(floatprotectionasperIP68) - The sensor utilizes a float,and it provides protection in accordance with IP68 standards,indicating it is highly resistant to dust and wat er ingress. 4. TerminalEnclosure:CastAluminumIP66 - The terminal enclosure is made of cast aluminu m and has an IP66 rating, which means it is protected against dust and powerful water jets. 5. Numb erofFloats:Three - This sensor employs three floats for accurate level measurement. 6. SwitchType:T wo-Part(Probe+RemoteController) - The sensor's switch system consists of two parts: a probe and a r emote controller. 7. Probe Enclosure X Conduit Connection: Cast Aluminum IP66 XPG11 Cable Gland - The probe enclosure is made of cast aluminum and has an IP66 rating. It is equipped with a PG11 ca ble gland for secure cable connection. 8. Process Connection MOC : CS(Carbon Steel) - The material of construction for the process connection is Carbon Steel. 9. Process Connection Size & Type: Other s - The specific size and type of the process connection are not detailed in the provided information.T his should be clarified with the manufacturer or supplier. 10. Electrode Type : Flexible - The sensor u ses flexible electrodes for level measurement. 11. Electrode MOC X Insulation: SS316(StainlessSteel3 16)X PVC - The material of construction for the electrodes is StainlessSteel316, and they are insulate d with PVC. 12. Number of Electrodes : Four(3Levels) - The sensor employs four electrodes to measur e three different levels within the tank. 13. Pressure Connection (PR.CN) : 40NBBS-10TDFLANGE-CS - The pressure connection is a40mm nominal boreBS-10 table D flange constructed from Carbon Steel. 14. Material of Construction (MOC): SS316(StainlessSteel316)XPVC - The primary material ls used in t he construction of the sensor are Stainless Steel 316 and PVC. 15. PressureRating(PRRTG):5 Kg/Cm2 - The sensor is designed to withstand a pressure rating of 5 kilograms per square centimeter. 16. Ma ximum Temperature : 70°C - The sensor can operate in environments with a maximum temperature of 70 degrees Celsius. 17. Switch: CNS Probe - The switch used in the sensor is referred to as the CN S Probe. 18. L:8000, L1:8000, L2: 8000, L3 :8000 - These values indicate the length of wire or cable used in the sensor, which is 8 meters. ]
| Delivery Location | State | Quantity |
|---|---|---|
| ACOS/DEPOT | Delhi | 8.00 Numbers |
| Total | 8 Numbers | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Annex2.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .