Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45.3 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹48.5 L+₹3.1 L (6.81%)Rejected-Finance HARIPUSHPA APARTMENT BUILDING NO E 1 FLAT NO 01 REST CAMP ROAD DEOLALI CAMP 422 401 | DEOLALI CAMP | NASHIK | MAHARASHTRA | 422401 | L2 | Rejected-Finance Being Not L1 |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
27 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF OJHAR
GE AF OJHAR
ADDN ALTN TO BLDG NO NP 9 OFFICERS MESS PH II AT AF STATION DEOLALI
2023_MES_590776_1
8869/E8
Open Tender
Civil Works
Item Rate
240 days
DEOLALI
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE AF OJHAR
₹98,000
Yes
16 Jun 2023
21 Apr 2023
29 May 2023
22 Apr 2023
27 May 2023
10 May 2023
Amount
Surface dressing n exc 15cm deep and getting out soft/loose soil, complete all as specified
Excavation in trenches n. exc 1.50 m wide and n.exc 1.50m in depth for foundation and getting out in hard and dense soil, complete all as specified and directed.
Excavation in trenches exc 1.50 m wide but n.exc 3.00 m in depth for foundation and getting out in hard and dense soil, complete all as specified and directed.
M&L PCC 1:4:8 type D-2 (using 40mm graded aggr) as in fdn filling and mass concrete all as specified.
Brick work with sub class'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM (1:6) all as spd and directed
S&F Pre- painted galvatumealuminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
S&F Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275
S&F Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.
S&F MS Machine made screw bolts with hexagonal or square head at one end and screwed the other each screwed end to be fitted with washers and one hexagonal nut exc 16 and not exc 20 cm long
S & F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes,with riveted, bolted or welded attachment Fe-410-W(Gde E-250) quality B.
Reinforcement cement concrete M-25 ( Design mix) as in foundations including rafts, footings, foundations beams, plinth beams, bases for columns and basement slabs etc complete all as specified and directed.
Reinforcement cement concrete M-25 ( Design mix) as in columns, pillars, piers, posts and struts etc complete all as specified and directed.
Reinforcement cement concrete M-25 ( Design mix) as in beams, cantilever, bressummeres lintels over 1.50m spam complete all as specified and directed.
Reinforcement cement concrete M-25 ( Design mix) as in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the likecomplete all as specified and directed.
Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, including flat rough finished surafaces of concrete complete all as specified and directed.
Formwork to sides of pillars, posts, struts, piers, columns, and stanchions, square, rectangular or polygonal in shape, including flat rough finished surafaces of concrete complete all as specified and directed.
Form work to sides and soffits of floor and roof beams, beams haunching, girders, bressummers, lintels and cantilever, shelves including supports over hangs etc rough finished surfaces of concrete ( flat ) complete all as specified and directed.
Returning filling in including spreading, levelling,watering and well ramming in layers not exceeding 25cm thick.
Removal of surplus soil to a distance not exceeding 50m and depositing where directed at a level not exceeding and depositing where directed at a level not exceeding 1.5m above the starting point and disposal.
Mild steel TMT bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified & directed.
Mild steel TMT bars 6 to 10mm dia ,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, (as in stirrups) hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to Fe-310-O or Fe-410-O all as specified & directed.
Hardcore of guage exc63mm,Broken Stones or Boulders deposited, spread & leveled in layers n exc. 15 cm thick, watered & rammed to a true surface
Cement concrete type C-1, 1:3:6 (using 20mm graded aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair incl making joints at every 2.5 m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight and complete all as specified
M&L for 100 mm thk PCC 1:4:8 type D-2 as in subbase to flooring.
M&L 25 mm thick PCC ,type B-1(20 mm graded aggregate) in flooring cmplete all as specified and directed.
M & L screed bed or bedding layers of mortars 15 mm thick in CM 1:4 for laying floor finishes.
M & L for coloured (light shade) vitrified ceramic tiles 10mm thick (Square/rectangular) polished, area of each tiles exc 0.36 Sqm but n exc 0.42 sqm in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match and the shade of the tiles including 15mm screed bed or bedding layer CM 1 : 6 all as specified and directed by Engineer-in-Charge.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement. all as spd and directed
M&L glazed ceramic coloured tiles in vertical surface 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match incl rendering 10mm thick in CM (1:4) and finished rough, complete all as spd & directed.
M&L 20 mm thick Granite (of any type) work (table rubbed & polished) in steps, jambs, pillars, window-cills cooking platforms & like in cement mortar (1:4) including pointing into white cement (1:2) using marble dust with admixture of pigment to match shade of granite over 15 mm thick cement screed in CM 1:4 including Roughening surfaces of old concrete floor by picking,sweeping clean and washing down with water to remove dust etc and brusing neat cement slurry with 3.00 kg per sqm all as spd & directed.
M&L Rendering 10mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and as directed.
M&L Rendering 15mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and directed
M&L two coats of distemper oil emulsion over a coat of primer including preparation of new surfaces complete all as specified and directed
M&L for Preparation of new plastered surface on walls and applying Two or more coats of 100% Premium exterior emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. as specified
S & F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat to fixing etc, complete all as specified.
S & F anodised aluminium window and ventilator shutters, fixed tyupe without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminum snap beading, screws etc complete all as specified.
Material and labour for powder coated aluminium sliding window with anodized aluminium frame 3 track of size 92mm x 32mm x 1.3 mm thick with sliding shutters with necessary channels (top rail, bottom rail and style of size 40mm x 15 mm x 18 mm x1.10 mm thick) including glazing with tinted sheet glass panel 4.00 mm thick/stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm fitted with necessary jointing cleats, glazing clips. locking device one for each shutter, rubber packing, aluminium beading screws etc complete all as specified and as directed Make : Jindal / Hindalco / Indalco (ii) Glass : Sanit Gobin, Modi Guard, TATA cement mortar 1:6 mixed.
S & F plain sheet glass 4.8 mm thick tinted, fixed to aluminium doors/windows/ventilators complete all as directed by Engr-in-Charge (Note :- Beading/rubber packing is included in the rates for aluminium section above)
Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks, or galvanized wire staples all as specified & directed.
M & L for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed
S&F 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all as specified.
S&F 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all as specified.
S&F 20 mm size gun metal globe or gate valves with iron wheel head, screwed both endsfor iron pipe and fixed cast copper chromium plated fancy type alloy ISI marked with crutch or butter fly handles screwed down screwed for iron pipe .
Angular Stop valve cast copper alloy (ISI Marked) fancy type, chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 15mm bore dia, complete all as specified and directed.
S&F Bib taps fancy type for 15 mm bore pipe, cast copper alloy fancy type chromium plated of Make - Jaquar , Marc and Johnson complete all as spd and directed.
S & F Vitreous china wash basin(Oval Shape), white flat back,size 550 x 400 mm including waste pipe , brackets and cutting for and pinning in ends of brackets or errecting stand and 32 mm dia PVC waste pipe including waste copling 32mm size full thread , all as spd and directed
S&F 15mm bore pillar cock fancy type, screwed down high pressure with or without letters hot or cold with long screwed shank and fly nuts screwed for iron pipe ISI marked add if fixed in repairs complete all as specified & directed.
S&F Vitreous china wash down water closet pan (pedestal pattern), white, complete including supply and fixing to trap, Incl Supply and fixing of Plastic water closet seat, black, closed pattern with flat bottom, & cover & mild steel chromium plated or aluminized hinging devices
S&F PVC flushing cistern 10 ltr capacity incl PVC connection inlet and and outlet connections,brackets,incl supply and fixing PVC flush pipe 32mm bore of polyethylene of low or high density complete including making necessary connections to water supply pipe line and jointing to WC all as specified and directed.
Vitreous China urinals, bowl S&F vitreous china urinals half stall type, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)
PVC connections 15mm size with PTMT nuts of length 450 mm
Rotational moulded polyethlene water storage tanks of capacity 250 litres three layers (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete including 20mm dia ball brass valve high pressure with polythene float complete all as specified & directed.
S&F 100 mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears laid in floor with cement joints all as specified.
S&F 100mm dia CI bends (any radius) diminishing pieces or tapers (larger bore measured) with ovel asses door complete all as specified and directed
S&F 75mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears fixed to walls with clamps and cement joints all as specified.
S&F 75mm CI bends diminishing pieces or tapers
S&F 75 mm dia CI bends (any radius) diminishing pieces or tapers (larger bore measured)
S&F CI floor trap 75 mm with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 for waste pipe complete all as specified.
S&F cast iron cowl for 75 mm dia all as directed by Engr-in-charge.
M&L in repair 150x100 mm Salt glazed stoneware gully traps, square or round mouthed, type‘P’
S &F 12mm thick toughened glass pane fixed to opening with stainless steel cleats as directed by Engr-In-Charge
M&L Treating the bottom & sides of excavation at the rate of 5 liters of emulsion per square meter of surface area
M&L Treating the blackfill in contact with foundation at the rate of 7.5 liters of emulsion per square meter of a vertical surface (Area of the substructure in contact with blackfill to be measured)
M&L Treating the top surface of filled earth at the rate of 5 liters of emulsion per square meter of surface
M&L Treating the soil under plinth protection at the rate of 5 liters of emulsion per square meter of surface area
Demolition of cement Concrete of any description and in any position not otherwise specifically provide for roof etc all as specified and directed.
Demolition of brickwork built in cement mortar including alll quions,arches, pillars etc but exclusing ashlar facings dressed stonework and pre cast concrete articles.
M&L Brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM (1:4) and as directed.
Providing cement concrete Type B-1 (1:2:4), 20 mm graded aggregate as in in bed plates, hold fast, coping etc complete all as spd and directed by Engineer-in-Charge
Taking down cement plaster any description on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc
M&L for rendering 5 mm thick in CM 1:3 on concrete surfaces/ceilingfinished even and smooth without using extra cement.
M&L for rendeing 15mm thick on stone masnory surfaces or other than fair faces of brick work of walls in cement motoar 1:6 finished even and fair.
M&L preparation of surfaces of plastered or unplastered new surfaces of ceiling applying two coats of distemper oil emulsion over 2 to 3mm thick wall care putty all as specified.
Preparation of new plastered surface of wall by applying 2mm thick wall care putty and making the surface smooth and applying two coat of oil emulsion distemper complete all as specified and directed.
Complete removal of existing treatment of ceiling and applying two coats of distemper oil emulsion over 2 to 3mm thick wall care putty all as specified.
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.
Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level).
M&L Non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding, in floors set and jointed in neat cement slurry and pointedin cloloured cement to match including 15mm screed bed or beddinglayer cm 1:6 all as specified and directed.
All as per item No 78 above but vertical surfaces over 10mm thick rendering in CM 1:4 all as specified and directed.
M&L glazed coloured (digital/printed/design) ceramic tiles in vertical surface 450 mm x 300 mm x 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match the surface over and including 10 mm thick rendering in CM 1:4 complete all as speficified and directed.
M&L 25 mm thick PCC 1:2:4 type B-0 using 12.5mm graded stoneaggregate as in floor finish all as specified and directed.
Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar.
M&L machine cut Cudappah stone slab flooring 20-25mm thick over cement screed base laid jointed wirth grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.
Machine cut kota stone in flooring 18-20 mm thick (Pre-mirror polished), over and incl 20 mm thick cement screed base in CM 1:6,laid jointed with grey cement slurry mixed with pigment to match the shade of the floor including rubbing and polishing complete and moulding at edge if reqd all as specified and directed.
M /Lfor 18-20 mm thick kota stone tiles (Pre-mirror polished), in riser of steps, skirting, dado etc, set and jointed in neat cement slurry and pointed in coloured cement to match tiles including rounding the edges of kota stone over and including 10mm thick backing coat in cement mortar (1:4), surfaces finished even nad rough to receivetiles, al as specified and directed.
M&L Chamfering, splays or arris in facework exc 15mm but n exc 50 mm wide
M/L Cement concrete type C-1, 1:3:6 (using 20mm graded aggregate) as in plinth protection and paving 75mm thick in slope finished even and fair incl making joints at every 2.5 m and at corner filled with bitumen 85/25 and sand in ration 1:2 by weight and complete all as specified
Taking down chowkats or frames with shutters not exc 1.5 Sq m (without taking of shutter from the frame)
Taking down chowkat or frames exe 1.5 Sq m but not exc 4 sq m each with shutters (without taking of shutter from the frame)
S&F factory made PVC moulded door frame of size 50mmx47mm out of 5mm wood grain printed PVC sheet & edgeswill be printed to match with printed sheet reinforced with M.S. square tube, all as per specification and drawing.
Factory made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with but 2 mm thick MouldedPrelam PVC Sheet on the front face & 2mm prelam PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing.
S&F cold rolled stainless steel but hinges 100 mm size medium weight complete all as specified and directed.
S&F aluminium alloy barrel tower bolt 150mm long
S&F 150mm aluminium alloy handles cast/plate type
S&F 300 mm long aluminiumk alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed.
Taking up or down steel tubing 15mm bore and connections, including cleaning for re-fixing or removal to store.
Cutting phase, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshadesm shevles,lintels, etc: and cutting cahses for concealed water tubing or concealed conduit wiring, etc, and makinggood, cutting not exc 10cm girth.
S&F in repairs bib taps 15mm bore cast copper alloy chromium plated, fancy type with crutch or butterfly handle, screwed down,screwed for iron pipe on for brass ferrule all as directed by Engr-in-Charge
S&F in repairs stop cocks 15mm bore, chromium plated, fancy type screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions with long shank and cup washers all as directed by Engr-in-Charge.
Taking up or down steel tubing 25mm bore and connections, including cleaning for re-fixing or removal to store.
S&F GI tubing 25 mm bore medium grade with all fittings and fixed to wall, ceiling or laid in floor.
Dismantling unserviceable water tank of capacity 1000 ltrs of any description and removing to store complete all as specified and asdirected.
S&F rotational moulded polyethylene water storage tanks 1000 ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I
S&F in repairs ball brass valves, high pressure, with polythene float and flyhut for 25mm bore dia pipe complete screwed for iron pipe or brass ferrule and fixed.
S&F repair 25mm dia Gun Metal, globe or Gate Valve with iron wheel head screwed oth ends for iron pipe and fixed.
S&F 15mm dia Gun Metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed.
S&F PVC connections 15mm size with PTMT nuts of length 450mm
S&F in repairs vitreous china water closet (squatting pan) Orrisa pattern of size 580 x 440mm white with integral footrests & 'P' trap (excluding flushing cistern and flush pipe) including conection to trap, to flushing pipe etc complete including PCC for making good to floor etc. complete all as directed by Engr-in-Charge.
S&F repairs low level flushinbg cistern of syphonic action type 10 ltr capacity PVC fixed to wall with bracket and screwed including PVC flush pipe complete fitting etc all as directed by Engr-in-Charge.directed
S&F PVC (SWR) pipes, single socketed, in any length with rubber rings 110 mm dia as in floor/wall including taking down old pipe all as specified.
S&F PVC (SWR) bends 110 mm dia
S&F PVC (SWR) bends 110 mm dia with access door
S&F in repair PVC floor trap 75mm with grating inlcuding jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 with CP grating jointing with ot without hole for waste pipe complete alll as specified.
S&F framed work such as grills, gratings door chowkats etc, with ends of bars shouldered and/or riveted, or forget into spikes; framed iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe-310-0
S&F 10-12mm thick frosted toughened glass door (logo of Air Force as specified and directed) with two nos of stainless steel handles for each shutter, 250 mm long of decorative quality, floor spring of heavy duty in each shutter alongwith all fitting and fixtures and lockingt arrqangements of approved make all as specified and directed by Engr-in-Charge.
S&F 10-12 mm thick frosted toughened galss in partitions fixed in railing / fixed to aluminium frames (logo of Air Force as specified and directed) alongwith all fitting and fixtures and locking arrangements of approved make all as specified and directed by Engr-in-Charge.
M&L for POP false ceiling with wire netting inlcuding making of coves, mouldings, offsets, cornics, projections with suspender system of GI main runner 1200 mm c/c and cross chanenl fixed @ 600mm C/C to main runner with GI clips including finishing joint tape & jointing compound also including two coat of plastic emulsion paint over one coat of primer all fixing shall be done as directed, Rate is inclusive of all fittings, fixtures, formwork, T&P, safety measures at sitye design and pattern as approved by Engr-in-Charge etc completed in all respect and as directed.
S&F of stainless steel tube railing/posts not less than 1.5 mm tick, grouted in walls at equal intervals with suitable decorative stainless steel caping including cutting holes in brick / stone walls built in cement mortar for inserting railings and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 with all necessary fittings for railing and all as directed by Engr-in-Charge.
S&F powder coated sections for doors and windows / Partitions including frames of size as approved and fixed all as specified and directed (Note : (i) Paneling such as glass, Gauge etc will be measured and paid saperately. (ii) The rate quoted under this item deemed included for necessary jointinf cleates, glazing clips, alluminium beading, screws, rubber packing and locking devices and in built handles for sliding windows. However, no element on account of weight will be taken into considereation for these item. (iii) Floor door spring/locks/tower bolts / handles/door closure/hinges for doors measured saperately. (iv) Size of door / windows shall be all as directed at site. (v) Grills will be measured saperately. (vi) Second class hard wood betten of apprrpriate size to be inserted inside the frame for fixing hinges and the same is included in the rate quoted.
M&L for texture paint of any colour to existing wall with preparation for wall with 1.5 sqm thick wall care putty in two layers for texture paint complete all as specified and directed by Engr-in-Charge
Surface excavation n. exc, 30cm deep and averaging 15cm deep and getting out in hard/dence soil.
M&L PCC 75mm thick 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base
M&Lchequered cement concrete tiles rubber moulded 20cm x 20cm x 25cm thick set, jointed and pointed in neat cement slurry infloors, with grey cement and pigments over and including 15 mm thick screed bedding in CM 1:6.
M&L Cement concrete typpe C1, 1:2:4 using 20mm garde stone aggregate as in sub base for edgeing /copings.
Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement moprtar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to amtch with shade of granite.
M&L Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations.
M&L for Brickwork with old size burnt bicks, straight or curved on plan ex 6m mean radius, built in CM 1:4.
Excavation over area in any type of soil not exc 1.5m deep and getting out.
Brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius for manhole/septic tank etc built in CM (1:4) all as spd and directed.
M&L for loose filling with brick bats broken of gaude 40 to 80 mm in soakage pit or well.
M&L for 15mm thick plaster in cement mortar 1:4 finished even and smooth without using extra cement mixed with water proofing compound.
Supply only integral water compound.
Extra for forming fair finished drain or channel 30cm inner grith in cement/concrete, using extra cement, including forms, moulds, mitred/stop ends etc.
M&L concrete bed to drain pipes incl forming cadles in cement concrete 1:3:6 type C2 for 150 mm dia pipe.
M&L 150mm RCC pipes calss NP2 wihtout collar per length of pupe complete all as specified.
M&L for providing cement concrete 1:2:4 type B1, using 20mm graded stone aggregate as in bed block and copings, and the likeincluding weathering, slightly rounded or chamfered angles and throating, with necessary form work as required & all as directed.
Taking down carefully aluminium/copper point wiring (light,fan,socket power etc) on TW batten/PVC casing capping, surface steel/PVC conduit including all fitting/fixtures and making good disturbed surfaces of wall/floor/ceiling etc to match the adjoining surfaces.
M&L for point wiring complete with two single core, PVC insulated, unsheathed, multi stranded bright annealed copper conductor cable, 1.5 Sq.mm 1100 Volts, FRLS grade drawn through and including heavy duty PVC casing and capping not less than 25 mm width and accessories surface mounted on walls, ceilings etc. on & including PVC board with earth dolly arrangement with surface plate for mounting switches, sockets, regulators etc and one run of 1.5 Sq.mm PVC insulated, unsheathed, multistranded, copper conductor cable FR grade as earth wire and connected to common earth dully complete for One light/fan point controlled by one switch.
All as per item no-138 above but One 3 pin socket out let 5 Amps on independent board.
All as per item no-138 above butOne 3 pin socket out let 5 Amps on Same board.
One bell point controlled by one push button.
All as per Sl item No 138 above but with two runs of 2.5 Sq.mm cable and one run of 1.5 Sq.mm cable as earth wire for one 3 pin socket outlet/power point 15 Amps controlled by one switch.
Supply and fixing switch modular 6 Amps 230 Volts one way switch. Make Anchor Roma/Legrand Aretor/Crabtree
S&F Switch modular type AC 230 volts 16/20 Amps one way complete all as specified and as directed. Make Anchor Roma/Legrand Aretor/Crabtree
Socket modular 6 Amps AC 230 Volts 2/3 pin combined 2 module complete all as specified and as directed. Make Anchor Roma/Legrand Aretor/Crabtree
Socket modular 6A/16 Amps-2/3 pin combined AC 230 Volts 2 module complete all as specified and as directed. Make Anchor Roma/Legrand Aretor/Crabtree
S&F lamp holder PVC/ Poly carbonate type with back plate suitable for batten fitting SP 230 Volts
S&F ceiling rose,3 phase/ PVC /polycarbonate isolated body,65x50 mm two to three terminals
S & F Modular Bell push 6A,1way, 1module, complete all as specified and directed.Make Anchor Roma/Legrand Aretor/Crabtree
S&F electric bell Ding Dong AC 230 volts single pole.
S & F Modular Fan Regulator electronic rotary,0-4 steps step type 100 Watt, 240 Volt 50 Hz hum free 2 module complete all as specified and directed.Make Anchor Roma/Legrand Aretor/Crabtree
Supply & Fixing ceiling fan AC single phase 230/240 V of size 1200 mm sweep including connect with PVC insulated and overall sheathed flexible copper conductor cable 3 core of size 0.50 sqmm and including hanging arrangements made out of MS clamps with nuts, bolts and washers all as specified and directed by Engr-in-Charge. Make : Anchor / Havells / Khaithan /Bajaj
Supply & fixing decorative ultra slim square profile linear LASER RAY lighting fixture extrudedpolycarbonate, environmental friendly, energy efficient ready to use pack 20W LED 6000K, complete all as specified and as directed by Engineer-in-Charge. Make: Crompton, (CAT No.LDLSR20-CDL) or equivalent in Philips/Bajaj/Havells/Wipro.
Supply & fixing decorative ultra slim square profile linear LASER RAY lighting fixture extrudedpolycarbonate, environmental friendly, energy efficient ready to use pack 10W LED 6000K, complete all as specified and as directed by Engineer-in-Charge. Make: Crompton, (CAT No.LDLSR10-CDL) or equivalent in Philips/Bajaj/Havells/Wipro.
S& F and connecting up surface mounting decorative bulk head LED ,energy saving, environmental friendly, long life, corrosion resistant complete with LED and connecting up with and including size 3 core copper flexible wire from connector to ceiling rose/adoptor including all necessary fixing arrangements complete. Havells, (CAT No.RUGBYNEONFT10WLED860SSYMTOPC ) or equivalent in Philips/Bajaj/Cromton Greaves.
S&F sheet metal enclosure distribution board 415V, Vertical TPN 4 way with provision for DHx100 series MCCB of Legrand make as incomer & SP/TP MCBs as outgoing as per IS including compact insulated bus bar & rounded neutral bar, door earthing complete double door surface /recess mounting IP-43 protection of L & T Cat NO. DBVTL004GD or equivalent in legrand/siemens, complete all as specified and directed by Engineer-in-Charge.
S & F Sheet Metal enclosure double door for mounting MCBs with 200 A rated bus bar 8 way AC 240 Volt with IP-43 protection including cutting chases to wall for fixing DB and making good the disturbed wall surface all as required at site or directed by Engr-in-Charge . Make Indoasian/L&T/HPL
Material and labour for MCB SP 6-32 Amp.
S&F MCCB 3 Pole, 415 V, fixed type, 25 to 100 Amps with breaking capacity 16 KA
S&F MCB SPN 40 Amp.
S&F wiring for circuit/ submain wiring along with earth wire with the two run of copper conductor of size 4.0 sq. mm + One run of 4.0sq. mm as earth wire. of FR PVC insulating copper stranded conductor single core cable in surface/ recesed as required earth wire in and including PVC Casing Caping of suitable standard size all as directed
S&F single pole and earth enclosure with two pin and earth plug with socket complete with one single ploe MCB of 20 Amp all as per directed by Engineer in charge.
S&F ceiling light fittings concealed type 15 W LED energy saving, environmental friendly long life and accessories fixed in false ceiling including connection with PVC copper 1.5 sqmm 3 core cable etc complete all as directed. Make Havells Model No INTEGRAHEDLR 15W LED857S or equivalent in Phillips, crompton , Wipro as approved by GE
Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of earth plate at a depth of not less than 1.5 metre below ground level, earth plate surrounded by 15cm thick and packed layer of charcoal dust and common salt, connected to earth lead of GI Strip 25 x 4 mm fixing on wall by means of bolts, nuts and washers of the earth wire.galvanised iron or steel and thimbles and other end of the earth strip connected to earthing test point and protected by galvanised iron pipe light grade 40mm dia and water pipe 20mm dia GI light grade with funnel and wire mesh, PCC chamber in cement concrete (1:3:6) type C-2 and CI cover with frame all as shown in electrical plate No. 5 of SSR part-I all as specified and directed
S&F gate light IP 65 RATED LED post top ideal to lit up parks, garden ways and heritage sites etc.., complete all as specified & as directed by the Engineer-in-charge.
Excavation in trenches n. exc 1.5 Mtr wide and n. exc 1.5 mtr in depth and getting out soft/loose type soil.
M&L & fixing of DWC pipes it should be flexible & should allow deformation in diameter as well as In joints under external load & soil natural movement, socket & spigot joint with electrometric sealing ring , it should be highly corrosive resistant & it should be impact resistant, chemiacal resistant, flexible & light weight of size 63 mm dia complete with coupler, elbows, joints,& necessary space parts complete all as specified
Supply and lay in trenches/floor/on wall/ on surface with necessary fixing accesseries LT XLPE insulated screened PVC beded galvanised steel strip or wire armoured electric power cable (heavy duty)1100 volts grade with stranded aluminium conductor of size 16 Sqmm 4 Core including necessary connection with provision of lugs & cable gland fixing arrangements all as specified and directed.
Supply & fixing ventilating fan made out of high quality engineering plastic, resistant to colour change with anti static properties, 250mm sweep suitable to work on 230 Volts 50 Hz AC supply of Havells or equivalent of CG/Bajaj including connecting to ceiling rose all as required or directed.
S&F new Storage water heater 25 ltrs capacity vertical mounting AC 230 Volts BEE 5 Star rating including connecting cord and plug, safety valve, nuts and bolts, PVC Flexible connections with length 450mm long 15mm dia with brass hexagonal adoptors both side duly ISI marked Suitable for hot/cold water complete including grouting of nuts and bolts, complete all as specified and directed Make Havells/Venus/V Gaurd
Vinod Enterprises
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .