Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.5 LAccepted-AOC | L1 | Accepted-AOC ACCEPTED BEING LOWEST | |
| 2 | L2₹14.5 L+₹11,520 (0.80%)Rejected-AOC | L2 | Rejected-AOC NOT ACCEPTED BEING NOT LOWEST | |
| 3 | L3₹15.8 L+₹1.4 L (9.41%)Rejected-AOC | L3 | Rejected-AOC NOT ACCEPTED BEING NOT LOWEST | |
| 4 | L4₹15.9 L+₹1.5 L (10.5%)Rejected-AOC | L4 | Rejected-AOC NOT ACCEPTED BEING NOT LOWEST | |
| 5 | L5₹17.3 L+₹2.9 L (20.0%)Rejected-AOC KOIL KOIL PULWAMA PULWAMA JAMMU KASHMIR 192301 | PULWAMA | JAMMU AND KASHMIR | 192301 | L5 | Rejected-AOC NOT ACCEPTED BEING NOT LOWEST |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
15 Jun 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) AWANTIPUR
GE (AF) AWANTIPUR, 8 FBSU, AF AWANTIPUR
REPAIR/REPLACEMENT OF ROOFING, CEILING, BRICK WORK and OTHER CONNECTED B/R WORKS AT 8FBSU, AF
2024_MES_655832_1
GE (AF) AWA-05/2024-25
Open Tender
Civil Works
Item Rate
180 days
GE (AF) AWANTIPUR
AS PER NIT AND TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE (AF) AWANTIPUR
₹50,000
Yes
5 Oct 2024
25 May 2024
18 Jun 2024
25 May 2024
15 Jun 2024
9 Jun 2024
Amount
Dismantling of timber scantlings exc 40 sq. cm in section as in fillets, rails, posts, rafters, purlins, etc., complete all as specified and directed by Engineer in charge.
M&L 2nd class soft wood clean sawn timber framed and fixed in frame work for ceiling, complete all as specified and directed by Engineer in charge.
M & L for preparation of wooden surfaces and wood based materials ,new or old of any description and girth, not otherwise described and treated with creosote, complete all as specified and directed by Engineer in charge.
Dismentalling of plain or corrugated steel sheeting of any gauge, thickness etc. in roof coverings/cladding, complete all as specified and directed by Engineer in charge.
S&F galvanised corrugated mild steel sheeting, with two corrugation side lap fixed with 'L' type or 'J' type or cranked hooked bolts with washers in roof, 0.63mm thick, grade-O quality, with 120 grms/sqm zinc coating and grade 'B' Class 8, complete all as specified and directed by Engineer in charge.
Refixing 0.63 mm thick plain or corrugated steel sheeting, any gauge, thickness, roof coverings with two corrugation side lap fixed with L' type or 'J' type or cranked hooked bolts and dome type bitumen washers, complete all as specified and directed by Engineer-in-Charge. Note:- serviceable sheets obtained under item No 5 above shall be re-used.
S&F Galvanised plain mild steel sheeting 0.63mm thickness fixed with l or J type or cranked hook boltes with washers, in roofs as in ridge etc., complete all as specified and directed by Engineer in charge.
S&F in repair 1.00 mm thick plain, black steel sheeting, in eave board & straight flashings (length & girth as fixed) with welded and shouldered joint to be provided, complete all as specified and directed by Engineer in charge.
S&F in repair 25 mm thick 2nd class hardwood fixed with screw to mild steel/wooden frame work as in eaves board including dismantling of old damaged boards, complete all as specified and directed by Engineer in charge.
Preparation of new steel surfaces of steel or iron work or CGI/PGI sheeting in walls or roofing over 10 cm width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide/zinc chromate in camouflaging (Disruptive) pattern (Green, Grey & Brown colour), complete all as specified and directed by Engineer in charge.
Dismantling structural steel work including doors, gates but excluding framed truss etc., complete all as specified and directed by Engineer in charge.
S&F Roof trusses (framed), trussed, posts, struts, purlins, crane gantries,rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats,base plate and gusset plates etc confirming to Fe 410 -W (Gde-E- 250) quality-A, complete all as specified and directed by Engineer in charge.
Preparation of new or previously untreated steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed by Engineer in charge.
All as per item No. 13 above but old printed surfaces two coat of synthetic enamel paint, complete all as specified and directed by Engineer in charge.
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc., complete all as specified and directed by Engineer in charge.
M & L Brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius in cement mortar 1:6. incl demolition of stone/brick masonry built in cement mortar, complete all as specified and directed by Engineer in charge.
M & L Plain cement concrete type B1, (1:2:4), using 20 mm graded crushed stone aggregate as in benching, copping, surface channels and other similar nature of work etc. the like including form work and finishing all exposed surface of concrete incl demolition of cement concrete any description and in any position not otherwise specifically provided for, complete all as specified and directed by Engineer in charge.
M&L RCC (nominal mix) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like Type B1 1:2:4 (20 mm gradded aggregate) incl demolition of cement concrete reinforced of any description in any position, complete all as specified and directed by Engineer in charge.
S&F mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all specified and directed.
Form work to soffits of suspended slabs n exc 200mm thick (Horizontal or sloping) rough finished surfaces of concrete, complete all specified and directed.
M & L Rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 on wall surfaces, finishing the surface even and smooth without using extra cement, complete all as specified and directed by Engineer in charge.
M&L Rendering cement plaster 15mm thick in cement mortar 1:6 on other than fair faces of brick wall or on stone masonry surfaces, surface finished even and smooth without using extra cement, complete all as specified and directed by Engineer in charge.
M&L for preparation of new plastered surface on walls and applying two coats of oil bound distemper over a caot of perimer on plastered surfaces, complete all as specified and directed by Engineer in charge.
Preparing new plastered or un-plastered surfaces of walls and applying two coats Acrylic exterier emulsion paint in camouflaging (Disruptive) pattern (Green, Grey & Brown colour) over a coat of acrylic primer, complete all as specified and directed by Engineer in charge.
S & F Framed work as in false ceiling, doors or gates of angle or other section with gusset plates, rails, braces, etc. complete drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe-410 grade, complete all as specified and directed by Engineer in charge.
M&L 6mm thick Veneered decorateive plywood, grade 1 (with BWR resin) with decorate face veneers on one face; fixed with screws to timber frame work, complete all as specified and directed by Engineer in charge.
Dismantling boarding, any description fixed in any position with nails or screws, complete all as specified and directed by Engineer in charge.
S&F Seamless calcium silicate ceiling12 mm thick , made out of 1800 x 1200 mm size board of siliceous and calcareous materialreinforced with cellulose fibre fixed tothe ceiling section with 25 mm longself drilling and tapping screwshaving phillips head with under head cutter at 200 mm centre to centre,including two coat of synthetic enamel paint and one coatof primer finshing the joint of face board with specially emulated jointing compound and 48 mm wide fibre tape to provide seamless finish (Frame work for ceiling shall be measured and paid separately), complete all as specified and directed by Engineer in charge.
S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surroundingwall using nylon sleeves andscrews at 1800x1200 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended fromsoffit at approx 1800x1200 mm centre to centre with Gl cleat and steel expansion fasteners withand including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurledweb of 50 mm and flange of 26 mm each with lips of 10.5mm fixed to theintermediatechannel with connecting clipsacross the intermediate channel at 1800x1200 mm centre to centre, complete all as specified and directed by Engineer in charge.
S&F Anodised aluminium snap grid frame work for false ceiling for size of grid 605 x 605 mm including hangers 6 mm dia GI (up to 1200 mm long) adjusting level fixed to roof, complete all as specified and directed by Engineer in charge.
S&F 4 mm thick non asbestos fibre cement building board ISI Marked fixed with screw to aluminium frame work in ceiling flat or sloppy as per manufacturer instructions all as specified and directed.
S&F 6 mm thick of plywood, grade BWP, type BB fixed with screw to mild steel frame work and No of ply 5 as in ceiling, complete all as specified and directed by Engineer in charge.
Dismantling of timber scantlings less than 40 sq. cm in section as in fillets, rails, posts, rafters, purlins, etc., complete all as specified and directed by Engineer in charge.
M&L 2nd class soft wood Plain fillets.square,rectangular or triangular in section, exc 3 sqcm but n. exc. 6 sqcm in section clean sawn, secured with nails or brads, complete all as specified and directed by Engineer in charge.
M&L Prelaminated particle board 12mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination as in false ceiling fixed to Mild steel/ timber frame, complete all as specified and directed by Engineer in charge.
Preparation of new surfaces of non asbestos cement plain building board as in ceiling applying three coats of white wash, complete all as specified and directed by Engineer in charge.
Preparation of new wooden surfaces of any description not otherwise described, not exceeding 10 cm width or girth and providing two coat of synthetic enamel paint over one coat of pink primer, complete all as specified and directed by Engineer in charge.
APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application, complete all as specified and directed by Engineer in charge.
Preparation of new wooden surfaces of any description not otherwise described, over 10 cm width or girth and providing two coat of synthetic enamel paint over one coat of pink primer, complete all as specified and directed by Engineer in charge.
Note :- An amount of Rs. 93,500.00 on account of credit schdule for Sch 'A' Part-II Shall be deducted from the total amount of BOQ to arrive at the contract sum.
M/S ABBAS M. ENTERPRISES
MS Ghulam Hassan and Sons
M/S GEE EMM MIR
M/s Gh Qadir and Sons
M/S MIR SAJAD ENTERPRISES
M/S BASHIR AHMAD AND SONS
nazir Ahmad Dar and sons
stage.html
html • 0.06 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .