REPAIR/MAINT OF JOINERIES AND HARD STANDING, DRAINS, CULVERT, FOOT PATH, FENCING, GATE PILLERS, COMPOUND WALL, SIGN BOARDS ETC AT AFS MOHANBARI UNDER GE (AF) MOHANBARI

Amount

Taking down chowkat or frame with shutter (without taking off shutter from the frame) exc. 1.5 sqm and n.exc 4 sqm each, making good disturbed surfaces and removing materials from site of work complete all as specified and directed.

Taking down chowkat or frame with shutter (without taking off shutter from the frame) not exc. 1.5 sqm each, making good disturbed surfaces and removing materials from site of work complete all as specified and directed.

Taking down shutters of any description exc 1.0 sqm but not exc 2.0 Sqm each including removing to store complete all as specified and directed.

Taking down shutters of any description not exc 1 Sqm each including removing to store.

S&F factory made Pressed steel frames size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

S&F 2nd class HW plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F 35mm thick factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 30mm thick, factory made 2nd class HW glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.

S&F solid PVC door frame of size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) con-sisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

Refixing the shutter of any description exc 1 sqm an not exc 2Sqm each in the same opening.

Refixing the shutter of any description n exc 1 sqm each in the same opening.

S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

Hacking out old broken glass any thickness, size quality or description from wooden/steel frame fixed in repair with wooden beads/metal pinning and S&F 4 mm thick sheet glass in square not exc. 0.50 sqm in each pane, fixed with wooden beads or putty (in metal frames etc) complete all as specified and directed.

S&F galvanised steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in hold fast block, filling in pressed steel chowkats including necessary form work etc complete all as specified and directed.

M & L bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required hooks (stay), heavy, for large gates; hook and pintle hinges large hasps and staples; chains hand made sliding bolts clamps hold fasts wall ties hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 all as specified and directed.

S&F 75mm butt hinges, medium weight, cold rolled mild steel all as specified and directed.

S&F 100mm butt hinges, medium weight, cold rolled mild steel all as specified and directed.

S&F 100 mm aluminium handles, cast type, anodised complete all as specified and directed.

S&F 100mm aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F aluminium alloy, anodised, sliding door bolt 250mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

Dismantling of timber scantling 40 sqcm and over in section in any position unframed work, complete all as specified and as directed.

S&F 2nd class hard wood in scantlings wrought timber fixed.

M&L for preparation of untreated new wooden surface of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint, with a coat of pink primer.

M&L for preparation of new steel surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, compete all as specified and as directed.

S&F framed work such as grills,gratings,etc with ends of bars, shouldered and / or riveted. or forged into spikes,framed guard bars barred iron doors ladders.framed balusters walk ways railings framework of watertanks and similar work conforming to Fe.290. Gde-E-165 complete all as specified and directed.

S&F in repair 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, as in cupboard shelves Including taking down existing complete all as specified and directed.

S&F in 100 mm size hasp and staple, aluminium anodised including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F 40mm dia, cupboard knobs brass polished fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed.

S&F 50mm butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

Repair/resecuring of aluminium door, easing & adjusting including taking down and refixing in same opening etc, complete all as specified and directed.

S&F powder coated anodised aluminium section of any type for replacing damaged members if any for shutters including jointing cleats for fixing etc, under item No. 33 complete all as specified and directed.

S&F 5mm thick sheet glass, ordinary quality, exc 0.5 sqm in each pane including for glazing clips, rubber packing, anodised aluminium snap on beading for fixing glass panes in frames and including hacking out old broken glass complete all as specified and directed as in repairs.

S&F powder coated anodised aluminium frame for windows, ventilators with one or more rebates including jointing cleat for fixing etc complete all as specified and directed.

S & F anodised aluminium window shutter, sliding/side hung with out shas bar, aluminium section top & bottom rail (60 x 25 x 1.51 mm) left & right style (50 x 25x1.30 mm), including necessary joining cleats glazing clips, rubber neaprene packing, anodised aluminium snap beading, screws, anodised aluminium fitting such as suitable handle with locking device (02 Nos), aluminium grill (7.1 mm dia & ninium weight 2.7 Kg/sqm) complete all as specified and directed.

Demolition of reed lathing single or double incl batten and plaster or chicken wire mesh etc complete all as specified and directed.

S&F wire netting of galvanised wire 0.91 mm dia fixed with tinned tack of wire staples and size of mesh 12mm etc complete all as specified and directed.

M&L for plastering 20mm thick on one side of lathing in cement morter 1:4 etc complete all as specified and directed.

M&L for plastering 15 mm thick on other side of lathing in cement morter 1:4 etc complete all as specified and directed.

M&L for running welding in repairs of iron thickness exc 6mm and n exc 9mm all as specified and directed

Taking down cement plaster from brick walls including raking out joints, hacking for key and scrubbing down with water complete all as specified and directed.

M&L for plastering 15 mm thick in CM 1:6 on other than fair faces of brick or concrete surfaces and finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil emulsion distemper over a coat of chalk whitening preparatory to distempering complete all as specified and directed.

S&F in repairs Mild steel helical door spring 300mm long, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F in repair door closer hydraulically regulated designed No 2universal type, suitable for door shutter of 851 to 1000 mm in width and weighting between 61 to 80 kg of aluminum extruded section complete all as specified and directed.

S&F in repair Curtain rod, mild steel, chromium plated with fixing brackets,stops, rollers etc, complete all as specified and directed.

S&F in repair Floor door stopper 150mm overall length of aluminium alloy body anodised complete all as specified and directed.

Dismantling of wall and ceiling boards (plup, fiber, insulation etc) or insulation board/slabs/blankets any size complete all as specified and directed.

S&F of PVC soffit system for False ceiling / wall panelling purpose, to be screw fixed on a GI (GI-0.4mm) channels or equivalent and standard hardware framework with interlocking between panels, Panel Size : 2700x300mm/ Panel colours : 4shades of wooden (Walnut/ Washestar oak/ Oak/ Golden Oak) or 3 Shades of Uni colour (White/ Brown/ Graphite) : to be applied with finishing trims in same colour combination of soffit panel (J-Trim & T-Trim for False ceilings. Panels to be in strict compliance with PN-EN ISO 527-1:2012/ PN-EN ISO 527-2:2012. Soffit Panels, 340mm (effective usage area of 300mm) wide, 12mm deep, 1.2mm thick PVC sheets, plain/ perforated/ hideen perforated without non-woven acoustic textile. Panels feature 11mm wide flange for interlaocking between the panels. Optionally the flange with 11 x 3mm ventilation holes can be used to achieve a ventilated ceiling. Panels to be manufactured from Solid PVC surface. Panels have a size of 2700 x 340mm : Effective size for coverage 2700x300mm. Panels to be installed using J-Trim along the periphery and to be coupled in longitudinal direction using T-Trim of the same colour combination of the panel for false ceiling applications complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

S&F Non-skid glazed ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles over and including 15 mm thick screed bed in cm 1:6 complete all as specified and directed.

S&F Glazed ceramic tiles 350 x 250 x 7 mm 450 x 350 x 7 mm or thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in in white cement mixed with pigments to match the shade of tiles over and incl 10 mm thick rendering in CM 1:4 complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors not exc 15 cm in thickness complete all as specified and directed.

M&L for 75 mm thick plain cement concrete 1:4:8 type D- 2 (using 40mm graded stone aggregate) in sub base of flooring/ hard standing complete all as specified and directed.

Material and labour for Screed bed or bedding layer of mortar (1:4) 15 mm thick for laying floor finishes complete all as specified and directed.

M&L Chequered cement concrete tiles 25cm x 25cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors jointed and pointed with white cement mixed with pigment to match the existing tiles complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size size conforming to IS-15658-2006 of 80mm thickness M-40 Grade jointed with grey cement and pigment complete all as specified and directed.

Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for 50mm tthick cement concrete 1:2:4 Type B-2 (using 40 mm graded stone aggregate) as in hard standing, floor/paved surface etc complete all as specified and directed.

M&L for 50 mm thick cement concrete 1:3:6 Type C-2 (using 40 mm graded stone aggregate) as in plinth protection, floor/paved surface etc complete all as specified and directed.

Demolition of brick work built in cement mortar, complete all as specified and directed.

M & L brick work with subclass 'B' bricks straight or curved on plan to any radius built in CM 1:6, complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:4 in on brick or concrete surfaces incl finished surfaces even and smooth, complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of cement primer complete all as specified and directed.

M&L for providing Cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in benching of surface channels and drains complete all as specified and directed.

M & L for continuous brick edging with old size bricks with width equal to the length of the brick; of well burnt bricks, laid dry on edge and pointed in CM 1:6 for drains or in any other situation and without any sand cushioning etc complete all as spcecfied and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for etc complete all as specified and directed.

M&L for Precast RCC 1:2:4, nominal mix, type B-1 uising 20 mm graded stone aggregate as in cover slab of drain etc set in cm 1:6, complete all as specified and directed . Note:- Reinforcement shall be measured seperately

M&L for Mild steel TMT bars 6 to 8 mm dia as in reinforcement cut to length bent to shape required including cranking, hooking ends and binding with mild steel wire (annealed) not less than 0.90 mm dia, complete all as specified and directed .

M&L TMT bars 10mm dia and over, cut to length, bent to shape as required incl cracking bending hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and directed.

M&L for brick work with using sub class 'B' old size bricks, laid flat on sloped sides of drains or in any other situation pointed in CM 1:6 without any bedding surface and flush pointing complete all as specified and as directed.

Extra for forming fair finished drain or channel upto 30 cm inner girth in cement concrete, using extra cement, including forms, mounds, mitred/stopped end etc.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe 410-W (Gde E250) quality-B all as specified and directed.

S&F Framed /Ornamental work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe 410-W (Gde E250) quality-B all as specified and directed.

S & F Mild steel Angles, bars, flats etc., as in supports for stiffening of fencing post struts , wall ties, hold fasts, clamps and similar small articles confirming toFe 290 Gde-E-165 including dismantling of MS steel complete all as specified and directed.

S & F Mild steel screw bolts (machine made) length of neck n.ecx 15mm with hexagonal or square heads at one end and screwed the other, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and directed.

Supply only Chain link MS galvaised fencing, any size or type weight n exc 4 Kg/Sqm complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire

M& L for PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete in Columns, pillars, piers, posts and struts all as specified and directed.

Mild steel round bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips complete all as specified and directed.

Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

S&F Mild steel bolts of dia n exc 12, purpose made, with hexagonal or square head one end and screwed the other, or screw both ends; each screwed end to be fitted with washers and one hexagonal or square nut, exc 30cm long including drilling hole in iron post complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

M&L for 20mm thick Granite (of any type) tiles machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete including 15 mm thick rendering of CM1:4 for laying of granite complete all as specified and directed.

M&L for Acrylic Synthetic & colour layer: - (7 Layer) 1. Primer Course (1 LAYER): - Providing & laying one coat of Primer for smoothing and bonding of bitumenbase with acrylic synthetic resurfacer. 2. Resurfacer Course (1 LAYER): - providing and laying one coat of Acrylic Resurface blended with approved silica sand which makes bond between surface and colour coat also improves the strength of base. 3. Texture course (2 LAYER): - providing and laying two coats of colour Provides a uniform surface texture and determines the speed of play and traction of the court. 4. Finish Course (3 LAYER): - Providingand laying two coat of roller course with Colour Classic will create a vibrant, durable finish highly resistant to weather and One Coat with ultraviolet degradation. Finish (colour). 5. Lines (2 LAYER): -Providing and laying two coats of heavy bodied acrylic latex. Colour white striping paint either textured or un-textured, and covers in on application.

S&F Aluminium composite panel (ACP) of 4mm thick panel with 0.25mm aluminium cover sheet thickness including dismantling , any colour all as specified and directed.

M/S RK Trading

S K ENTERPRISE

R K CHAKRABORTY AND CO

KP GHOSH AND CO

M/S N K SAI TRADING

M/S CHAKRA GOHAIN