Term Contract for installation of Ornamental Lights and Poles on major public roads and CB parks and other miscellaneous pockets for better illumination to address security concerns in Ward No. 5 to 8, Delhi Cantt.

M/L Boring hole horizontally under ground at required level with trenchless digging machine or manually suitable to pass 50 mm dia MS pipe in the bored hole under the road including passing of cable of suitable size and disposal of spoil to a distance n exc 125 m all as specified and directed by the Engineer in Charge (MS pipe and fitting measured and paid separately).

S.F and laying into horizontal bore hole under the road 50 mm dia MS pipe of minimum 3.25 mm wall thickness, welded and socketed ends as specified and directed by Engineer in-Charge.

M/L Bus-bar chamber consisting of three phase and neutral, aluminum strips of 100 Amp Capacity including connections with thimbles complete.

M/L XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100v grade cross-sectional area 25 sqm, 4 core as direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required specified and directed by Engineer-in-charge. Note: Includes Sand Cushioning, Excavation, Brick Edging etc.

M/L XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, 4 core and cross sections area 50 sqmmm as direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required specified and directed by Engineer-in-charge. Note: Includes Sand Cushioning, Excavation, Brick Edging etc.

M/L XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, 4 core and cross sections area 95 sqmmm as direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required specified and directed by Engineer-in-charge. Note: Includes Sand Cushioning, Excavation, Brick Edging etc.

S/F Ornamental Decorative Pole made out of cast iron base (HT-625mm) and upper profile with dia 76 mm x 3.2 mm galvanized mild steel pipe (HT-2425mm) pole is primer coated and PU painted not less than 90 micron having service window for incoming and outgoing connections. Pole should be prewired with MCB and conductor ready to install. Pole should be suitable for mounting of 50W LED Post Top fixture Cat. No. Twinkle Lite – LORETTA-3000 mm or equivalent of Highlite, Mayfair, Orient, C&S, Halonix, Philips, Wipro, Bajaj, Havells, Crompton, LUX MAX Twinkle

S/F Ornamental Decorative Pole made out of cast iron base (HT-625mm) and upper profile with dia 76 mm x 3.2 mm galvanized mild steel pipe (HT-2425mm) pole is primer coated and PU painted not less than 90 micron having service window for incoming and outgoing connections. Pole should be prewired with MCB and conductor ready to install. Pole should be suitable for mounting of 50W LED Post Top fixture Cat. No. Twinkle Lite – LORETTA-4000 mm or equivalent of Highlite, Mayfair, Orient, C&S, Halonix, Philips, Wipro, Bajaj, Havells, Crompton, LUX MAX Twinkle

S/F of ornamental 50 watts LED Post Top luminaries made of aluminum having duly powder coated PU painted with PC / PMMA clear / Frosted diffuser with sturdy triple arm. MCPCB having high luman LED are mounted on aluminum heat sinks. Twinkle Lite – 537(PT-50) or equivalent make ofHighlite, Mayfair, Orient, C&S, Halonix, Philips, Wipro, Bajaj, Havells, Crompton, LUX MAX Twinkle

S/F laying, jointing of two run of PVC insulated cable 2.5 sqmm size with copper conductor and connecting from Kiosk box to light fitting as specified and directed by Engineer-in-Charge.

Supplying /installation/testing and commissioning feeder pillar outdoor, cubical type, weather proof totally enclosed suitable for 440 V , 3 phase,50 C/s electric supply fabricated out of angle, 40 mx40m x6mm and Ms plain sheet 2 mm thick complete with two coats of spray painting of enamel paint, with a prior coat of primer, comprising of the following . a) Aluminum bus bar TPN , 3 phase, 4 strips 100 Amp. - 1set. b) Incoming MCB TPN 63 Amp. -1 No. c) OutgoingMCB TPN 32Amp. – 1 No. d) MCB Single phase neutral (SPN) outgoing 32 Amp. - 4 Nos. e) 24 Hrs electronic Timer- 01 no. f) 40 Amp TP Air brake contactor -01 g) Heavy duty godown lock- 02 nos. h) Termination incoming /outgoing cable with suitable size of ferrules and compression gland. i) Hinged door open able on both side with heavy duty locking system-2 no. j) Canopy at Top. k) Legs of suitable length made out of 40 mmx40mmx6 mm angle iron including grouting the legs in 1:2:4 CC.

M/L Decorative column light is made out of aluminium profile body specially triangle shaped cut out designed with PC frosted diffuser for lighting, having 4x18 LED lights in warm white. Column is primer coated and polyurethene painted. A services window comprising a 4-way connector and MCB is provided at bottom section pole has a base plate with four mounting fixed at bottom with 1.5 sqmm sqmm copper wire suitable to operate on 230-volt AC Supply. Cat No. Twinkle Light-ADONIS or Equivalent.

M/L Decorative light made out of mild steel body having PC frosted diffuser for lighting with 4x18W LED lights in warm white. Column primer coated and polyurethene painted. A Services window comprising a 4-way connector and MCB is provided at bottom section pole has a base plate with four mounting fixed at bottom. Cat No. Twinkle Light-LEONID125 or Equivalent.

M/L urban garden LED Bollard made out of extruded aluminum profile with cast aluminium base and PC/PMMA diffuser for uniform light distribution with 1.5 sqmm sqmm copper wire suitable to operate on 230-volt AC Supply. Cat No. Twinkle Light-807 (BL-10) or Equivalent.

M/L urban decorative COB LED bollard specially laser cut designed galvanized body & base with PC/PMMA diffuser duly PU Painted with 1.5mm sqmm copper wire suitable to operate on 230-volt AC Supply. Cat No. Twinkle Light- 822 or Equivalent.

M/L urban decorative garden LED bollard made out of cast aluminum profile with cast aluminium & body with PC/PMMA diffuser for glare fee lighting with 1.5 sqmm copper wire suitable to operate on 230-volt AC Supply. Cat No. Twinkle Light- 828 (BL-18) or Equivalent.

Percentage BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (SCHEDULE A SECTION II) (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) It may understood that the amount of the contract is an estimation. In the event of quantum of decorative lights, poles & other items etc. generated on fewer side, the amount of work orders placed under the contract may accordingly vary on negative side beyond deviation limit incorporated in the RFP. In the event of contract amount going on the lower side the contractor shall not be entitled to any compensation on account of deemed profit or otherwise and this shall be an explicit condition to the contract.

NUMBER #

Percentage BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (SCHEDULE A SECTION III) (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) It may understood that the amount of the contract is an estimation. In the event of quantum of decorative lights, poles & other items etc. generated on fewer side, the amount of work orders placed under the contract may accordingly vary on negative side beyond deviation limit incorporated in the RFP. In the event of contract amount going on the lower side the contractor shall not be entitled to any compensation on account of deemed profit or otherwise and this shall be an explicit condition to the contract.

NUMBER #

Please Enable Macros to View BoQ information