Construction of New Anganawadi building at Ainapur Vijayapur in Vijayapur Taluk (2022-23th Pradhan Mantri Adarsh Gram Scheme)

Construction of New Anganawadi building

Mechanical Means -

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm a...

Mechanical Means -

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each depos...

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each deposited layer ...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

Steel Fabrication

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nomin...

Providing Brick work with common burnt clay Non Modular bricks of clasS designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse ...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and r...

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removi...

Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even an...

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, ...

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt...

Providing Jungle wood such as Nerale, Neem wrought and putup for purlins, common rafters and similar work including cost of materials, labour, usage charges complete as per spe...

Providing and fixing in position fully panelled Mathi/Nandi wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per dra...

Providing and fixing in position Mathi/Nandi wood fully panelled shutters for windows with stiles and rails of 35mm. thick, 75mm wide in two halves with panels of 25mm thick inclu...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to stee...

Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 15...

Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...

Providing and fixing white vitreous china water closet squatting pan (Indian type) : Long pattern W.C. pan of size 580 mm

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for ...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jo...

Cudddapah slab 2.5cms thick

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cuttin...

Providing and fixing Bib cock with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete- class - Economy

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light ...

Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of j...

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for t...

Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matt...

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size gra...

Providing and fixing ISI marked oxidised M.S. single acting spring hinges

with necessary screws etc. - 150mm

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992

with necessary screws etc. complete : 125mm

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc...

Providing wall black boards in 12mm thick with CM 1:3 and applied with primer & two coats of acrylic emulsion black paint including finishing etc.,complete.

Supplying heavy gauge PVC conduit pipe …mm dia……mm thick confirming to IS 2509 with suitable size bends PVC junction boxed etc and running before concreting slab the conduit should be tide to th...

Supplying and flush mounting teak wooden box without front plank,made of not less then 12mm thick wood.After due groove cuting,necessary masonry patch work complet.10"x7"x3"(254x178x76mm)(Electrical S...

Point wiring using copper wire with switch,Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using 1100V grade.Copper conductor flexible multistrand FRLS PVC insulated.2...

Point wiring using copper wire with switch,Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using 1100V grade.Copper conductor flexible multistrand FRLS PVC insulated.2...

Wiring for lighting/power circuit: using one of FRLS PVC insulated 1100 V grade multistran copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit: using one of FRLS PVC insulated 1100 V grade multistran copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Supply 6A flush/projected tyupe socket and a 6amps flush/projected type SP switch eiher surface/flush mounting in a existing gang box or in a 4mm thick plastic sheet and fixing ovr a slush mounted woo...

Supplying and fixing of modular switch and connected scessories on exiting modular swithc plate as per IS 3854 and IS 1293 -32AMps DP Switch( Ele.Sr-23-24 P-9 I-3.6.9)32Amps DP Switch

Supply 6A flush/projected tyupe socket and a 6amps flush/projected type SP switch eiher surface/flush mounting in a existing gang box or in a 4mm thick plastic sheet and fixing ovr a slush mounted woo...

Supplying and fixing modular switch and connected acessories on existing modular switch plate as per and IS 3854 and IS 1293 Elecreonic stepped regulatorChapter 3 i.No.3.6.4 P=9 PWD SR 23-24)

Supplying and fixing hylum plastic sheet 3mm thick with necessary ntitches for fixing switches,regulators etc.,and fixing on existing wood or metal box using N.F.scres(Elect Sr 23-24 P-9-I-3.9(

Supply of Roung/square recess/surface mounted rolling type LED Down ligh with….W GU 10 LED Lamp Rib fabricated from Die cast aluminium with white powder coated prewired to mains conncector and has s...

Supplyig and fixing polished wood board made of not less than 15mm thick plank on both side with planks made out of more than 2 pieces and fixing the same to the wall using tapered invered wooden flus...

Supplying fixing of porcelain fuse channes with cut on existing woodenpanel using necessary nuts,bolts and washers etc.,complete 32Amps(Ele SR 23-24 P-14,I-5.7.2)

Supplying and fixing miniaure circuit ereakers on existing MCB distribution boards using neessary clamps,bolts,nuts etc.,with provision for fixing suitable type capacity MCB's single phase/3 phase/si...

Supplying and fixing miniaure circuit ereakers on existing MCB distribution boards using neessary clamps,bolts,nuts etc.,with provision for fixing suitable type capacity MCB's single phase/3 phase/si...

Earthing: Suplying and fixing wiring,earth electreode for grounding conduits I.C. cutouts and other equipments on the meter board using 40mm dia 2.9mthick GI Pipe 2.5mtrs long buried in a pit.The pit ...

Suplying capacitor type ceiling fan complete with down rod blades,shackle,canopies etc.,for operation on 230 V 50 cycles single phase AC supply confirming to ISS 374-1979 and with double ball bearing ...

Supplying and fixing of … mm dia class A GI pipe bracket upto 2mtr long ben at suitable angle and fixing to this bracket 1x40/2x40watts fluorescent tub estreet light fitting of all capacities to TI ...

Fixing all types and all capacities fluorescent/false ceiling/spot light CFL fittings indoor on the wall/ceiling/rafters/girdes using 23/0.0076" twin PVC insulated wires,required nos of roung blocks a...