MP FUND (2023-24)

Amount

Earth work excavation and depositing on banks with initial lead and lift in gravelly soil stiff clay, hard stiff clay, murram, boulders mixed with gravel as per SS 20-B for foundation.

First Depth of 2.00M

2nd Depth of 2.00M

Plain Cement Concrete 1:4:8 mix using 40 mm ISS HBG metal including cost and conveyace of all materials and all labour charges, etc.

Supplying & Erecting centering for sides & soffiots including necessary supports & strutting upto 3.29m height for plane surfaces in all floors with all cross bracings complete complying with standard specifications and as directed by the departmental officers.

A.PLANE SURFACE (Water tank data)

Below Ground Level

2.90to 5.50 M Ht

5.90 to 8.50 M Ht

8.90 to 11.50 M Ht

B.CURVED SURFACE

C. SQUARE COLUMN

2.90to 5.50 M Ht

5.90 to 8.50 M Ht

8.90 to 11.50 M Ht

Supplying and Fabricating and placing in position MS steel or Ribbed Tor Steel for all Reinforced Cement Concrete works as per the design given including cost of steel and binding wire in all floors etc, Complete complying with stanard specification.(MS rod or RTS bar will be supplied departmentally at section stores and cost will be recoverd at issue rate). the binding wire shall supplied by the contactor.

Providing and laying in position, Standardised Concrete Mix M-20 Grade in acccordance with IS:45-2000, using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/ms and maximum water cement ration of 0.55, including admixture (plasticiser super plasticiser) in recommended proportions as per IS:9103 at accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m) 5156 kg of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing curing, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirement of IS Standard. (No separate payment will be made by the Department for the excess usage.

0 M to 1.50 M Below G.L

Above GL Columns 0 to 2.55 M Ht

Above Columns 2.95 to 5.55 M Ht 2nd Lift

Above Columns 5.95 to 8.55M Ht

Above Columns 8.95 to 11.55M Ht

Fabrication,Supply,Delivery and Fixing of outside MS ladder of 45 cm wide made out of 50x50x6 mm MS angle for sides and steps in 16mm dia MS rod at 30 cm centre to centre welded,jointed etc., Providing with suitable side dsupports,clamps and lccking arrangements etc.,

Providing and Fixing of R.C.C Inner access Laddor in R.C.C 1:1.5:3 using 20 mm HBG stone for OHT including cost of Reinforcement,Placinggrill in Position,centering Shuttering Charges.Mixing Concrete Curing etc., Complete as directed by the TWAD officer.

Providing PVC Ventilating arrangements mosquito Proof Nylon Net with 110M PVC Cowl and as directed by officers.

Providing Cut Stone Slab in C.M 1:3 and as directed by officers.

Providing Manhole Cover of Size 0.60x0.60M in R.C.C 1:1.5:3 with suitable Reinforcement 50x50x6 mm MS angles fixed along edges and as directed by TWAD Board officers.

Supply and delivery of un plasticised 150mm dia PVC Plain casing pipes of 3m length with screwed and socket end and centering guide for every 15m length of pipes as per IS 12818/92 and as amended from time to time to suit the borewell upto 80m depth with (Twad SoR 2019-20, P.No.6)

Supply and delivery of un plasticised 150mm dia PVC slotted casing pipes of 3m length with screwed and socket end and centering guide for every 15m length of pipes as per IS 12818/92 and as amended from time to time to suit the borewell upto 80m depth wit (Twad SoR 2019-20, P.No.6)

Supply and delivery of un plasticised 150mm dia PVC End Cap suitable for 165mm OD pvc pipes casing pipes of 3m length with screwed and socket end and centering guide for every 15m length of pipes as per IS 12818/92 and as amended from time to time to suit (Twad SoR 2019-20, P.No.12)

Supply and delivery of 5 HP Three phase panel board suitable for submiersible motor and accessories including all fittings as per schedules above. Rates inclusive of packing, loading, freight, unloading, stacking, transit and insurance charges etc., comp (Twad SoR 2019-20, P.No.101)

Supply and delivery for PVC insulated 3 core 4.0 Sq.mm copper submersible flat cable, conforming to IS 694/90 and as amended from time to time with ISI marking of reputed make. The rates inclusive of packing loading, trnaportation, unloading and stocking (Twad SoR 2019-20, P.No.108)

Supply and delivery of wet type submersible pumpsets 100 LPM and 75 m head Three phase 150mm dia without panel board suitable for 115mm dia conform to IS 8034/89 and IS 9283/95 with ISI marking as per specificatin for th eduty conditions detailed here under the motor fitted with thepump should be category "B" suitable for installation in 150mm/155mm borewell the pumpset should be wtih 5metre flat submersible copper cable the pump set should be delivered to for any where in Kancheepuram District including packing freight unloading stacking, transit and insurance charges etc., complete (Twad SoR 2019-20, P.No.88)

Supply and delivery of G.M. Gate valve 2" (Twad SoR 2019-20, P.No.30)

Supply and delivery of G.M. non return valve 2" (Twad SoR 2019-20, P.No.30)

Supply and fixing 2.00" GI pipe medium class with ISI mark (Twad SoR 2019-20, P.No.25)

Drilling of 150 mm dia bore wells anywhere in Kancheepuram district including transportation from one place to another place within this distict in alluvial soil or in sedimentary strata by using Rotary rig by first drilling a pilot bore of 150 mm dia upt

Reaming from 150mm dia pilot bore to 300 mm dia bore as directed by the departmentl officers upto 60m depth from the ground level

Labor charges for inserting the casing pipe assembly (With slots or without slots) in the drilled hole, supplying and packing the annular space with pebbles of size and quality as approved by the departmental officers. The pebbles should be approved specification and stacked for premeasurements

Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, mmeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days.

Supply, delivery and fixing the following specials in GI and PVC including cost and conveyance of all materials and labour charges fixing in position of specials etc.,complete

2.00" MS pipe Clamp

Bore cover

2.00" GI Coupling

2.00" GI Elbow

2.00" Flang set

2.00" H Nipple

Finishing the exposed surface of RCC item of work such as slabs, beams, sunshade, facia, canopy slab, staircase waist slab, landing slab etc., with CM 1:3, 10mm thick. including raking the surface. The rate is to include the cost of providing cement mortar beading or nosing for sunshades & staircase steps, landing slabs etc., complete complying with standard specifications.

Supply and fixing of RCC box type jolly of Size 0.60x0.45 M

Providing RCC Air Vent including cost and conveyance of all materials and all other labour charges etc. complete

Supply and delivery of 50mm dia Gate Valve including cost and conveyance of all materials and all other labour charges etc. complete (TWAD SoR 2019-20, P.No.30)

Supply and delivery of 50mm dia Non Return Valve including cost and conveyance of all materials and all other labour charges etc. complete (TWAD SoR 2019-20, P.No.30)

Providing kiosk of size 75 x 45 x 75 cm made up of G.I. Sheet of 16 guage with locking arrangements and fixing over the pedestal of 0.75 x 0.45 x 1.20 m using country bricks in CM 1:5 and plastering in CM 1:5 12mm thick and finishing etc. The rate including the cost of painting with kiosk earth work to foundation etc., complete as per TWAD Board type design and schedule of Rate (TWAD SoR 2019-20, P.No.52)

Supply and delivery of 50mm dia HDPE Pipe for Submersible motor including cost and conveyance of all materials and all other labour charges etc. complete

Plastering with CM 1:5, 20mm thick.over the cement concrete for floor finish including curing etc., complete complying with standard specifications and as directed by the departmental officers.

Painting two coats with approved CEMENT PAINT over one priming coat of cement plastered wall surface and ceiling including cleaning preparing the surface and curing etc, complete

4 Sqmm Pvc insulated Single core multi strand flecible copper cable

G.I Stay Wire P.No.103

Cost and Conveyance of 80 mm dia G.I Pipe For encasning at Road Cross (For distribution Main)

Refilling Charges for the Excavated earth for Pumping Main and Distribution System

BHARATHI