OT-15

Amount

Dismantiling the existing damaged aluminium doors and windows including removal of frames, hinges and fastenings and devoluting the retrieved materials to 400KV SS K.R.Thoppur stores including labour charges, lead, lift, T&P, etc., complete.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) windows of casement type open / sliding from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcemnt with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with espag multi power point locks and also it operates as handle. The corners and joints should be welded and claned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames, labour charges, lead, lift, T&Ps, etc., complete.

Providing and fixing in position of anodized aluminium glazed sliding window with 90x30mm outer frame and 40x15mm sliding frame of 2.45mm thick as directed by the Engineer in charge including cost of all materials, 4mm thick pinned glass, rubber beeding, cleat angle, labour charges, lead, lift, T&Ps, etc., complete.

Providing and fixing in position of anodized aluminium glass door, single leaf swing type with approved hydralic door closure and 5.5mm thick frosted glass with standard accessories but not limited to handles, locking arrangement, rubber beeding, aluminium cleat, etc., complete as directed by the Engineer in charge including cost of all materials, labour charges, lead, lift, T&Ps, etc., complete. (i) Shutter verticals - colour coated anodized aluminium section 47.5mm x 44.5mm of 2.45mm thick 2 nos, (ii) Shutter horizontals - colour coated anodized section 100 x 45mm of 2.45mm thick 3nos, (iii) Bottom shutter 12mm thick MDF board of exterior grade, pre-laminated on both sides, top shutter with 5.5mm thick frosted glass.

Providing and fixing in position of anodized aluminium glass door, double leaf swing type with approved hydraulic Floor spring for each shutter and 5.5mm thick front glass with standard accessories but not limited to handles, locking arrangement, rubber beeding, aluminium cleat, etc., complete as directed by the Engineer in charge including cost of all materials, labour charges, lead, lift, T&Ps, etc., complete. (i) Shutter verticals - colour coated anodized aluminium section 47.5mm x 44.5mm of 2.45mm thick 2 nos, (ii) Shutter horizontals - colour coated anodized section 100 x 45mm of 2.45mm thick 3nos, (iii) Bottom shutter 12mm thick MDF board of exterior grade, pre-laminated on both sides, top shutter with 5.5mm thick front glass.

Providing and fixing in position of colour coated aluminium framed partition of approved quality as directed by the Engineer in charge at site including supply and fixing the aluminium partition in position, cost of all materials, labour charges, lead, lift, T&Ps, etc., complete. (i) Vertical and horizontal posts - colour coated anodized aluminium section 63x38mm of thickness 2.45mm, countrywood filled alround, verticals at spacing of 900mm c/c and horizontal at 0.0m, 0.90m & 3.00m. (ii) MDF board or its equivalent grade board of 12mm thick both sides pre-laminated of exterior grade for a height of 900mm as bottom pannel and top panel at 3.00, level. (iii) Aluminium beeding of weight not less than 0.12kg/m on both sides of the shutter and plain glass at middle pannel at 2.10m level.

Plastering in CM 1:5, 12mm thick for surfaces over brick work as directed by the Engineer incharge including cost of all materials, labour charges, curing, lead, lift, T&P, etc., complete.

Supplying and fixing of Laminated PVC single leaf door SINTEX / STAR SUPREME make or equivalent of approved colour, Pattern and quality with shutter and PVC frame of required size and type with minimum 5mm thick PVC sheet as directed by the engineer at site with 3 Nos 100mm Aluminium butt hinges, 2 Nos 150mm anodized Aluminium handles, 2 Nos Anodised Alumium 200x12mm tower bolt and 1 Nos. 200mm Aldrop etc., for Bath and toilet including cost of transporting, lifting and fixing, cost of all materials, labour charges including fixing, lead, lift, etc., complete.

ARAVIND ASSOCIATES