Repair to floor, plastering, joinery, plumbing, sanitary fittings misc repairs of AGE BR I under GE Nagrota.

Amount

Taking down chowkhets or frames with shutter (without taking off shutters from the frames) exc 1.50 Sqm and n.exc 4.00 Sqm each .

Taking down chowkats with shutter n. exc 1.5 sqm each. (without taking of shutter from the frame) .

Taking shutter of any description exc 1 Sqm and n exc 2 Sqm each in the same opening including taking down and easing and adjusting

Refixing shutter of any description n exc 1 Sqm each in the same opening including taking down and easing and adjusting

Refixing shutter of any description exc 1 Sqm and n exc 2 Sqm each in the same opening including taking down and easing and adjusting

S&F pressed steel frame for door with two rebate incl necessary fixing lugs,hings,lock strike plate complete al as specified of size 125x60mm.

S&F pressed steel frame for door with two rebate incl necessary fixing lugs,hings,lock strike plate complete al as specified of size 105x60mm.

S&F 2nd class hard wood, 40mm thick plain, framed panelled shutters (any number of panels) with panels of timber flat on both sides (Feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers, fitterd to chowkhets.

S&F 2nd class hard wood 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc with sash bars, edges of framing plain, chamfered or rounded. Fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR part-I section 8 clause 8.24(a) , supplied and fitted to chowkats etc

S&F Box type Steel windows/vent with double shutters (inside for wiremesh & out side for glass), incl guard bar,hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded including a coat of red oxide after preparation of surface two coat of synthetic enamel paint before fixing.Steel window shall be conforming to relevant IS including taking down old window of any type. complete all as specified and directed by Engr-in-Charge.

S&F solid PVC door frames of sizes 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube complete all as specified and as directed.(Make Rajshri Plastiwood limited or Sintex)

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail and bottom rail on either side and as gap insert for top rail and bottom rail , panelling of plain colour PVC sheet to be fitted in the MS framewelded/ sealed to the stiles and rails with suitable PVC sheet beading , and jointed together with solvent cement in the frame at site as per specification.(Make Rajshri Plastiwood limited or Sintex)

3mm thick sheet glass, ordinary qaulity,in sqaures n exc 0.5 sqm each panes etc all as specified.

S&F galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples etc all as specified.

S&F 150mm long aluminium anodised barrel tower bolt of extruded section and fixed.

S&F 75mm long aluminium anodised barrel tower bolt of extruded section and fixed.

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed.

S&F 100mm mild steel butt hinges, medium weight, cold rolled and fixed.

S&F 75mm mild steel butt hinges, medium weight, cold rolled and fixed.

S&F 150mm long aluminium handles cast type, anodised and fitted.

S&F 100mm long aluminium handles cast type, anodised and fitted.

S&F 300mm long ordinary MS rat tail rod pattern springs incl roller and roller plate complete.

M&L two coats of synathetic enamel paint over a coat of pink primer on new wood or wood surfaces, over 10 cms width or girth incl preparation of surfaces.

S&F in repair harrison rails, mild steel, chromium plated with fixing brackets, stops, roller etc

Taking down cement plaster of any description on brick walls/ ceiling etc including racking out joints, hacking for key, scrubbing down with water complete.

M&L rendering 15 mm thick on external surfaces of wall in cement mortar 1:4 all as specified and directed.

M&L rendering 5mm thick in cm (1:3)as in ceiling , soffit of chajja etc.complete all as specified.

M&L rendering 10 mm thick on internal surfaces of wall in cement mortar 1:6 finished even & smooth without using extra cement as specified and directed.

M & L preparing new plastered surfaces of walls and applying two coats of cement base paint.

Preparation of old decorated plastered or unplastered surfaces of walls by brooming down or by steel wire brushes, scraping down smoke spot, moulds, moss and efflorescent salts, trading oil, greasy spots etc and applying TWO coat of cement base paint on walls. after filling any hole with putty complete all as spd.

Preparing new plastered surfaces of wall and applying two coats of oil bound distemper over 1 to 2 mm thick wall care putty over a coat of primer on walls etc all as specified .

M & L preparing new plastered surfaces of ceiling chajjas facia etc. and applying three coats of white wash .

Preparation of old plastered or unplastered surfaces of walls and applying 1 to 2mm thick applying One coats of oil emulsion distemper (of approved shade) upto three storey complete all as specified and directed.

Preparing of previously painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-charge.

Preparing of previously painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-charge.

Demolition of ground floors and paving n exc 15 cm thickness(below or above ground floor)

M&L Providing, cement concrete 1:2:4 type B-0 (12.5mm graded aggregate ) as in roof kerbs or mud stops, rounded or chamfered on edges or as in treatment to sunken floor including water proofing compound @2% of cement complete all as specified and as directed.Note:- WPC Mesured and Paid Separately.

M&L for 10 mm rendering in CM 1:4 including water proofing compound @2% of cement over roof surfaces finished even and smooth without using extra cement complete all as specified Note:- WPC Mesured and Paid Separately.

Supplied only for Integral water proofing compound.

M&L for Applying evenly a tack coat of induatrial bitumen 85/25 grade @ 1.2 Kg/Sqm.

M/L 100 mm thick Cement concrete type B2, 1:2:4 (using 40 mm graded granite stone aggregate) in base of flooring/ hard standing finished evern & smooth w/o using extra cement..

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises as directed

M&L 15 mm thick in cement mortar 1:4 screed bed or bedding layer of mortar for laying floor finishes as directed.

M & L Rendering 10 mm thick in cement mortar (1:3) as in backing layer for laying of tiles in vertical surfaces complete all as specified & directed.

M&L for non skid cereamic coloured tiles 7 to 8mm thick (square/ rectangle) area of each tiles exceeding 0.11 sqm but n. exc.0.18sqm, in floor etc set and joined in neat cement slurry and pointed in white or .coloured cement to match

M&L for joint free non skid cereamic coloured tiles 7 to 8mm thick (square/ rectangle) area of each tiles exceeding 0.18 sqm but n. exc.0.36sqm, in floor etc set and joined in neat cement slurry and pointed in white or .coloured cement to match complete all as specified and directed.

M&L glazed, coloured, ceramic, tiles of size (450mm x 350 mm) x 7 mm thick, on vertical surfaces, such as dadoes, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and mixed with pigment to match the shade of the slab including rubbing and polishing complete.

M&L for machine cut kota stone 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed base laid and mixed with pigment to match the shade of the slab includingrubbing and polishing complete.

M&L for 20mm thick screed bed or bedding layer of cement mortar 1:4 for laying of floor finishes etc.

M & L 75mm thick PCC 1:3:6 Type B2 ( 40 mm graded aggregsate) as in subbase and pavings etc all as specified.

M&L for Sand filling under floors or in foundations including watering and consolidation all as specified and as directed

M&L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness with grey cement and pigment, M-40 Grade etc all as specified.

M&L chequered cement tiles concrete 25cm x 25 cm x 22mm thick, set jointed in neat cement slurry in floor .

Dismantling water tank and removing to stores exc 500ltr n.exc 1000ltr

Dismantling water tank and removing to stores exc250ltr n.exc 500ltr

S&F 1000 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part I.MAKE;-VECTUX,SINTEX

S&F 500 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part I. I.MAKE;-VECTUX,SINTEX

S&F 20 mm dia Ball valve PTMT valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule.

Taking up or down 15mm bore steel tubing and connection including cleaning for refixing or removel to store.

S & F 15 mm dia GI tubing medium grade with all fittings and fixed complete to walls or laid in floors.

Cutting chases, pinning in, making good to facing where rerquired and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels,etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10 cm girth in brick walls

Taking up or down 20mm bore steel tubing and connection including cleaning for refixing or removel to store.

S & F 20mm dia GI tubing medium grade with all fittings and fixed complete to walls or laid in floors.

M & L for 62 cm wide Udaipur green stone 15 to 18 mm thick. (table rubbed and polished) as in cooking plate form of size not less than 2 m in length, incl over 20 mm thick screed in CM 1:4 including roughing of existing surface and applying a coat of cement slurry @ 03 Kg/Sqm of surface and pointing with white cement 1:2 using marble dusts admixture of pigment to match complete all as specified and as directed.

S&F in repairs Grating down 100 mm dia of PTMT 9 minimum weight 25 gm.

S&F in repairs 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement.

S&F vitreous china wash basin white of size 550x400mm incl waste coupling bracket and PVC waste pipe incl taking down old and as specified and as directed. I.MAKE;-PARRYWARE,JAQUAR,KOHLER

S & F in repair 15 mm bore pillar taps fancy type cast copper alloy chrominium plated fancy typewith capstan heads, chromium plated, screwed down high pressure with or without lettered "Hot or Cold" with long screwed shanks and fly nuts screwed for iron pipe. MAKE;-PARRYWARE,JAQUAR,KOHLER

S&F in repairs vitreous China wash down water closet pan (pedestal pattern) white, excluding flushing cistern & flush pipe . MAKE;-PARRYWARE,JAQUAR,KOHLER

S&F in repair PVC valves less syphonic action type low level flushing cistern 10 ltr capacity with inlet ball valve, brackets all as specified. MAKE;-PARRYWARE,JAQUAR,KOHLER

Supply and fixing vitreous china squatting pan, “Orissa” pattern size 580mm x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe complete including trap, set with cement MAKE;-PARRYWARE,JAQUAR,KOHLER

S & F in repair stop valve15mm bore cast copper alloy fancy type chromonium plated , cup screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions. MAKE;-PARRYWARE,JAQUAR,KOHLER

S & F in repair Angle valve15mm bore cast copper alloy fancy type chromonium plated , cup screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions. MAKE;-PARRYWARE,JAQUAR,KOHLER

S & F in repair bib taps 15mm bore cast copper alloy chromonium plated with crutch or butterfly, handle, screwed down, screwed for iron pipe. MAKE;-PARRYWARE,JAQUAR,KOHLER

S & F PVC connection pipe 15mm size with PTMT nuts of 450 length including fixed in repairs.

S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes, single socketed in any length with rubber ring joints laid in walls floors or trenches, etc including necessary excavation & earth work whenever required complete as specified.

S & F 75 mm bore PVC (SWR) bends any radius.

S&F Cast Iron soil Waste and Vent pipe in any length with or without ears with cement joints laid in in floors/wall of 100mm bore all as specified complete all as specified and fixed in repair all as directed

All as pe item above but fixed to floor/wall of 75mm bore pipe

Bends ( any radius ) with duck foot or heal rest for 100 mm bore pipe fixed in repair including taking out old fittings complete all as specified.

All as per srl item No above but 75mm bore pipe

CI branch pieces single (equal or unequal) ordinary or inverted (spigot or socket type ) or with parallel branches for 100mm bore pipe fixed in repair including taking out old fitting complete all as directed with oval access door fixed in repairs.

All as per item above but 75mm bore pipe.

M&L for 75mm dia cast iron Nahani Trap, with grating including jointing to waste pipe fixed in concrete type B1(1:2:4)

M & L for Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) Exc 250 and n exc 500 ltr.

M & L for Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) Exc 500and n exc 1000 ltr.

M & L for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, et Exc 250 and n exc 500 ltr.

M & L for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, et Exc 500and n exc 1000 ltr.

S&F 110mm dia PVC pipe single socketed in any length with rubber ring joints, fixed to walll and in trenches or in floors, fixed in repairs.

S&F in repairs Stack clamps out of 50mm by 5mm flat iron & 16mm dia round iron stays, including bolts & nuts & securing ends of stay to wall or roof for 100 mm bore

S & F 100 mm bore PVC (SWR) bends any radius.

S&F Aluminium anodized snap grid (powder coated) frame work of grid size 605x605mm including hangers 6mm dia GI (upto 1200mm long) for false ceiling including notching and preparing holes, including aluminium cleat/corner pieces and GI 4mm dia suspenders with utterfly clips, wall angle of size 24 x 24mm, main runner (teee) of size 24 x 38mm, cross tee of size 24 x 28mm, (No of suspenders shall be decided by the GE as per actual size requirement) including 6mm thick fibre cement plain builiding boards fixed to aluminum snap grid and providing two coats of white wash including preparation of surfaces including dismantling wall and ceiling board, any thickness includiing cover fillets if any all as specified and directed.

R.K. Works

BHARTI CONSTRUCTIONS

M/S Shankardass Devidass

ASHWANI KUMAR KHAJURIA AND SONS

M/S CJ CONSTRUCTIONS

AKSHAY CONSTRUCTION COMPANY

M/S BALWAN SINGH

Bidder Name

BHARTI CONSTRUCTIONS

M/S Shankardass Devidass

AKSHAY CONSTRUCTION COMPANY

U K Engineering Works

R.K. Works

M/S CJ CONSTRUCTIONS

ASHWANI KUMAR KHAJURIA AND SONS

M/S BALWAN SINGH