Karnataka

AOC

Goods

Supply of furniture for Division and Sub-division office No.6, No.7 Hunasagi and No.7 Mudnoor office

Krishna Bhagya Jala Nigam Limited

KBJNL Division NLBC Division Hunasagi | Karnataka

Amount: ₹8.5 LCloses: 24 Mar 2026Closed

Timeline

Published13 Mar 2026
Closed24 Mar 2026
Awarded5 Sept 2026

Bids

1 Bid5 Sept 2026

#	Company	Amount	Status
1	SHANTI FURNITURES AND GENERAL SUPPLIERS ₹7.9 Laccepted-aoc CTS NO 5240 1 OPP SHANTI BAR AND RESTARENT JAMKHANDI KARNATAKA BAGALKOT KARNATAKA 587301 UDYAM KR 01 0028196 \| BAGALKOT \| KARNATAKA \| 587301	₹7.9 L	accepted-aoc

Tender Value

₹8.5 L

EMD Value

₹21,200

Closing Date

24 Mar 2026, 5:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Krishna Bhagya Jala Nigam Limited

Contact Person

H B Konnur

Mobile Number

Work Description

Supply of furniture for Division and Sub-division office No.6, No.7 Hunasagi and No.7 Mudnoor office

Tender Information

Tender ID

KBJNL/2025-26/IND0029/CALL-3

Reference Number

KBJNL/2025-26/IND0029/CALL-3

Tender Type

Open

Form of Contract

Electronic Documents, First(One Cover)

Location

KBJNL Division NLBC Division Hunasagi

Source Website

Subscribe to view

Documents Required

11 documents required · 11 mandatory

Technical Bid

RequiredA copy of G.S.T. Registration certificate.

RequiredAffidavit as per SectionXV 1st Party Tenderer Name, 2nd Party Name Executive Engineer, KBJNL NLBC Division Hunasagi should be uploaded.

RequiredBid Capacity

RequiredCopy of Income Tax returns filed mentioning PAN no. for the last three financial year 2022-23, 2023-24 & 2024-25 Assessment year 2023-24,2024-25 & 2025-26

RequiredTenderer should be Original Equipment Manufacturer and registered with the competent authority OR Authorized dealer of the OEM or should have MoU agreement with authorized dealer and upload the same document.

RequiredTenderer should upload the ISO/ISI/BIS Certificate. Certificate should be in the name of the tenderer/OEM.

RequiredThe intending bidder shall upload self attested letter pad mentioning Firm Name, Proprietor/Managing Director Name, Full Address and Official Mobile Number

RequiredThe MSME Udyam registration certificate of the Tenders/Firm or PWD class III and above registration certificate should be uploaded.

RequiredThe PAN Card of the Tenders/Firm should be uploaded.

RequiredThe requisite Earnest Money Deposit

RequiredValid Turnover Certificate with UDIN Number.

Eligibility Criteria

Tenderers should not be associated, or have been associated in the past, directly or indirectly, with a firm or any of its affiliates which have been engaged by the Purchaser to provide consulting services for the preparation of the design, specifications, and other documents to be used for the procurement of the goods to be purchased under this Invitation of Tenders.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The tenderer should be a manufacturer who must have manufactured, tested and supplied the equipment (s) similar to the type specified in the ‘Schedule of Requirements’ up to at least xxxx % of the quantity required in any one of the last 3 years. The equipments offered for supply must be of the most recent series models incorporating the latest improvements in design. The models should have been released on or after xxxxx and be in satisfactory operation for xxxxx months as on date of tender opening. Certificates to be provided as per Section XII of Tender Document.

In case of authorized representative/dealer of a manufacturer - The manufacturer furnishes authorization in the prescribed format assuring full guarantee and warranty obligations as per General Conditions of Contract and Special Conditions of Contract. Manufacturers Authorization Form to be provided as per Section XIII of Tender Document.

In case of authorized representative/dealer of a manufacturer - The tenderer, as authorized representative/dealer , has supplied, installed and commissioned satisfactorily at least xxxxx % of the quantity similar to the type specified in the Schedule of Requirements in any one of the last three years which must be in satisfactory operation for at least xxxxx months on the date of tender opening. Certificates to be provided as per Section XII of Tender Document.

The legal status, place of registration and principal place of business of the company or firm or partnership.

Conditional tenders are liable to be rejected. The officer competent to accept the tender shall have the right to reject any or all the tenders without assigning any reason whatsoever.

A detailed description of the essential technical and performance characteristics of the goods.

A list giving full particulars, including available sources and current prices, of spare parts, special tools, etc., necessary for the proper and continuing functioning of the goods for a period of two years, following commencement of the use of the goods by the Purchaser.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Tenderer should be Original Equipment Manufacturer and registered with the competent authority OR Authorized dealer of the OEM or Should have MoU (agreement) with authorized dealer and upload the same document

Firm Name, Proprietor/Managing Director Name, Full Address and Official Mobile Number should be uploaded.

The tenderer should note that item specification should be read from tender document and should quote (excluding GST) for respective item as per specification mentioned.

The goods supplied shall be guaranteed for satisfactory performance for a period of 12 months from the date of supply. In case the goods are found defective during the above guarantee period, the supplier shall replace the goods at the cost of supplier at site otherwise security deposit will be forfeited.

The total number of Furnitures as per the contract should be supplied at once to Executive Engineer, KBJNL, NLBC Division Hunasagi within 30 days from the date of Supply Order.

The goods offered for supply must be as per specification.

The successful Tenderer should deliver to the employer a Security Deposit in the form of DD/FDR issued by a Nationalized/Scheduled bank in favour of the Executive Engineer, KBJNL, NLBC Division Hunasagi for an amount equivalent to 5% of the Contract price within 5 days in receipt of Letter of Acceptance in accordance with the conditions of contract at the time of agreement.

The tenderer shall bear all costs associated with the preparation and submission of his tender and the employer will not be responsible and liable for those costs.

The tenderers are requested to abide by the instructions and conditions contained in the Standard Tender Documents K/G-1 and further orders thereon.

If the tenderer fails to supply the required Furnitures within the stipulated period, the Security Deposit will be forfeited.

If any of the dates mentioned above happen to be a general holiday, the next working day holds good.

Any Modification/clarification will be published in the kpp portal. The bidders are advised to visit the portal regularly.

Successful bidders should execute the agreement within 05 days from the date of approval intimated. If the contractor fails to enter into the agreement within the said period, the EMD of the contractor shall be forfeited and action shall be initiated for barring to participate in the tender of KBJNL.

During the time of technical evaluation, if the employer finds that any Certification/ information furnished is false, such bidders will be disqualified and barred from participation in the bid.

Further information can be had from the undersigned during office hours.

If the percentage quoted by the contractor for the work is below the estimated amount put to tender of the department, then the contractor shall furnish an additional performance security in the form of FDR for an amount equivalent to the difference between the cost as per quoted percentage and the estimated amount put to tender at the time of agreement. The FDR will be released proportionately to the bill amount till the contractor achieves progress of the entire cost of the work as per the agreement.

The bids of all bidders who have uploaded the tender along with all relevant documents will be considered in the bid evaluation. However, prior to awarding of the work, the L-1 bidder would be asked to produce the original documents in support of the uploaded documents to enter into agreement. If the L-1 bidder fails to produce the original documents for entering into agreement, then his bid will be treated as non-responsive bid as per clause 26(1) of the KTTP Rules. The names of the bidders who does not produce the original documents will be removed from select list of KBJNL enrolment and barred from participation in any of the tenders to be invited by KBJNL apart from forfeiting the EMD, paid through e-cash.

The amount put to tender is exclusive of GST and the tenderer should quote without GST. However, GST will be paid at Prevailing rate during billing. The increase in GST shall not be paid in extended period of contract for which reasons for delay are attributable to the contractor as determined by the authority while granting the extension of time.

Not with standing anything stated above, KBJNL reserves right to assess the bidder capability and capacity to perform the contract, if the circumstances warrant such assessment in the overall interest of KBJNL.

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹21,200

Important Dates

Last Activity

5 Sept 2026

Published

13 Mar 2026

Download Ends

23 Mar 2026

BOQ Preview

•

Office Chair Non-revolving and non-tilting chair with armrest Product id - 5116877-79065650122 as directed by Engineer in charge of the work

•

Steel Shelving Cabinets Product id- 5116877-18013778769 Types of Shelving Cabinets (Dimensions are without pedestal height) everge (1855 mm X 910 mm X 480 mm) Availability of Drawers -Yes Availability of Lockers -Yes as directed by Engineer in charge of the work

•

acer Intel Core i7-13700 All in One PC. Product id 5116877-32664545583 Processor Number Intel Core i7-13700 Operating System (Factory Preloaded with Certification) Linux RAM Size (GB) 32 Type of Storage Installed with the System NVMe SSD Storage Capacity (in GB) 1024 Display Size - Diagonal (in Inches) 58.1 - 63 (22.87 inche - 24.8 inche) as directed by Engineer in charge of the work

•

Canon A4, A3 and Legal Size Monochrome (Black) Laser Multifunction Machine (iR2425 with DADF & Toner) Description of Stores Multifunction Machine Printer with Minimum 1 Year On Site Warranty, including Cartridge and Power Cord/Adapter Print Technology Laser Type of Printing Monochrome (Black) Print Paper Size A4, A3 and Legal Minimum Print Speed per Minute as per ISO/IEC 24734 in A4 Size-Monochrome (Black) (in PPM) 21 to 25 as directed by Engineer in charge of the work

•

EXECUTIVE CHAIR Revolving Chair with Synchronic tilt mechanism Product id-5116877-56969502243 Type of chair High Back Tilt mechanism Synchronic tilt mechanism Locking mechanism 3 Position locking Seat depth adjustment Fixed type Revolving mechanism Designed with 360 degree-revolving type Pedestal base Mild steel chrome plated Seat material PU foam Density of PU used in seat (kg per cubic meter) greater than 40 less than or equal to 50 as directed by Engineer in charge of the work

•

Five-Seater Sofa With Fabric Cover Product id-5116877-163829149 Total Number of Seats in the Sofa Set 5 Number of Single Seater Units (Nos)2 Number of Two Seater Units (Nos)No Two Seater Unit Number of Three Seater Units (Nos) Number of Four Seater Units (Nos) Frame Covering Fully Upholstered as directed by Engineer in charge of the work

•

Cantilever Office Chair Non-revolving and non-tilting chair with armrest Chair type Non-revolving and non-tilting chair with armrest Chair understructure type Cantilever Understructure material ERW tube conforming to IS 1161 latest The shape of tubular section of understructure Round Section Size (Diameter/Sides) of understructure22 mm Understructure wall thickness (mm)1.2 Castor No Seat material Moulded PU as directed by Engineer in charge of the work

•

Modular Table with Particle Board Table Top and Wooden/Engineer Wood Understructure Product id 5116877-14322021723 Table Top Material Type Particle Board Availability of Table top edge Yes Thickness of Table Top Edge (Tolerance ±5 mm)25 mm Table Top Edges Straight Length of Table Top (Tolerance ±50 mm)1200 mm Depth of Table Top (Tolerance ±20 mm)750 mm as directed by Engineer in charge of the work

•

PROGRACE Dining Chairs, Product id 5116877-54717895995. Length-23 Height-36 inch Chair Features Carving Material Bamboo as directed by Engineer in charge of the work

•

Executive Table with Pedestal/Side Storage Unit Product id 5116877-75341562805 Material Type of Table Understructure Wooden/Engineer Wood Understructure material of Table Under structure MDF Board Availability of modesty panel Yes Type of Executive Table Executive Table with Pedestal/Side Storage Unit Table Top Material Type MDF Board. Table Top Thickness(Tolerance±5 mm)25 mm Length of Table Top(Tolerance±50mm)1950 mm Depth of Table Top(Tolerance±20mm)900 mm as directed by Engineer in charge

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

AME Work_Furniture Tender Notification - KG1 Final-CALL-3.docx

Others - Tender Notification • 0.07 MB

Furniture Bid Document_KG-1- CALL-3.docx

Tender Document • 0.16 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

SHANTI FURNITURES AND GENERAL SUPPLIERS

₹7.9 Laccepted-aoc

CTS NO 5240 1 OPP SHANTI BAR AND RESTARENT JAMKHANDI KARNATAKA BAGALKOT KARNATAKA 587301 UDYAM KR 01 0028196 | BAGALKOT | KARNATAKA | 587301