Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹72.9 LAccepted-AOC | L1 | Accepted-AOC Aoc awarded | |
| 2 | L2₹72.9 L+₹3,000 (0.04%)Rejected-AOC | L2 | Rejected-AOC Not awarded | |
| 3 | Rejected-Technical | - | Rejected-Technical Technical disqualified |
Tender Value
₹72.9 L
EMD Value
₹1.5 L
Closing Date
17 Apr 2023, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Superintending Engineer,PWD, Dibrugarh Road Circle
O/O Superintending Engineer, PWD, Dibrugarh Road Circle, Dibrugarh
Construction of Ananda Nagar road connecting Bye Lane 1 and Bye Lane 2 from Ch. 0.00Km to Ch. 0.170Km under SOPD-G for the year 2022-23, Lahowal LAC
2023_PWD_30317_1
DRC-XIII/16/98/NIT/DIB/Pt-I/94
Open Tender
Civil Works – Roads
Item Rate
270 days
Lahowal
Please refer tender document
6 documents required · 6 mandatory
₹2,100
Yes
₹1.5 L
Yes
10 May 2023
3 Apr 2023
18 Apr 2023
3 Apr 2023
17 Apr 2023
3 Apr 2023
3 Apr 2023 - 17 Apr 2023
Amount
Clearing and Grubbing Road Land. (Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable materials to be used or auctioned up to lead of 1000 metres including removal and disposal of top organic soil not exceeding 150mm thickness. i) By Manual Means, B. In area of thorny jungle.
Excavation in Marshy Soil (Excavation for roadway in marshy soil with hydraulic excavator 0.9 cum bucket capacity including cutting and loading in tippers and disposal with in all lifts and lead upto 1000 meters , trimming of bottom and slide slopes in accordance with requirements of lines, grades and cross sections.)
Sand Filling in Foundation Trenches as per Drawing & Technical Specification.
Embankment Construction with Material Obtained from Borrow Pits (Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2 (Including cost of testing of materials at site and laboratory as directed by the deptt.
Construction of subgrade and earthen shoulders (Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300-2) (a), (Including cost of testing of materials at site and laboratory as directed by the deptt.) (a) From Private Land
Granular Sub-Base with Coarse Graded Material (Table:-400-2) Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to acheive the desired density, complete as per Cl. 401(ii) for Grading-II material
Water Bound Macadam (Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness,hand packing, rolling with vibratory roller 8-10 tonnes in stages to proper grade and camber applying and brooming requisite type of screening/binding material to fillup the interstices of coarse aggregate, watering and compacting to the required density (with an initial lead of 5.0Km) (b) Using Screening Type-B (11.2mm Agg.)(ii) for Grading-II material
Providing and laying Interlocking Concrete Block Pavement (ICBP) conforming to IS: 15658-2006 including all lead and lift complete as per technical specification and as directed, (a) 80mm thick interlocking precast blocks having compressive strength of 40N/sq.mm.
Construction of RCC Drain and Cross Drain:- Size of drain 900mmx1500mm Earthwork in excavation of foundation of structures in all types of soils as per drawing and Technical Specification section 300 including settting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.Ordinary Soil Manual Means Without watering Upto 3m depth
PCC 1:3:6 in Foundation (Plain cement concrete 1:3:6 nominal mix in foundation with crashed stone aggregate 40mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days) as per Technical Specification.
Supplying, fitting and placing TMT IS:1786 (Fe 500) bar reinforcement in substructure complete as per drawing and technical specifications. TMT-IS 1786 (Fe-500D) Primary Producer (TATA/SAIL/Esser Steel/ Jindal panthar steel/ Shyam steel or equivalent).
Plain/Reinforced cement concrete, in substructure complete as per drawing and technical specification and steel shuttering formwork.(N) Without Plasticiser, B-RCC Grade M20, Height upto 5m (Using concrete mixer)
Providing weep holes in Brick masonry/ Palin/ Reinforced concrete abutment, wing wall/ Return wall with 100mm dia AC pipe, extending through the full width of the structure with slope of 1V: 20H towards drawing foce. Complete as per drawing and Technical Specifications.
Construction of Retaining Wall Earthwork in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. (I) Ordinary soil. Depth upto 3.00m Foundation.
Sand Filling in Foundation Trenches as per Drawing & Technical Specification Clause 305.3.9
(Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.)
Plain/ Reinforced cement concrete, in open foundation complete as per drawing and technical specification including steel shuttering formwork. Without Plasticiser (I) RCC Grade M20 Using concrete mixer
Back filling behind abutment, wing wall and return wall complete as per drawing and Technical specification. (a) Sandy Material.
Providing weep holes in Brick masonry/ Plain/ Reinforced concrete abutment, wing wall/ return wall with 100mm dia AC pipe, extending through the full width of the structure with slope of 1V:20H towards drawing foce. Complete as per drawing and Technical Specifications.
Direction and place identification sign more than 0.9 sqm size board. Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide clause 801.3 fixed over aluminium sheeting, 2mm thick with area exceeding 0.9 sqm fixed on an angle iron of 25x25x4mm supported on a mild steel angle iron post 75mmx75mmx6mm, 2 nos. firmly fixed to the ground by means of properly design foundation with M-15 grade Cement concrete 45cmx45cmx 60cm, 60cm below ground level as per approved drawing and sign. (All the steel work must be Tata/ Sail/ or any other approved.
Retro reflectorised traffic sign: Providing and erecting of Retro-Refectorised cautionary, mandatory & informatory sign as per IRC:67 made of high intensity encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 2mm thick fixed on an angle iron of 25x25x4mm supported on a mild steel angle iron post 75mmx75mmx6mm firmly fixed to the ground by means of properly design foundation with M-15 grade Cement concrete 45cmx45cmx60cm, 60cm below ground levels as per approved drawing and sign. (All the steel work must be (ii) 600mm equilateral triangle.
Retro reflectorised traffic sign: Providing and erecting of Retro-Refectorised cautionary, mandatory & informatory sign as per IRC:67 made of high intensity encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 2mm thick fixed on an angle iron of 25x25x4mm supported on a mild steel angle iron post 75mmx75mmx6mm firmly fixed to the ground by means of properly design foundation with M-15 grade Cement concrete 45cmx45cmx60cm, 60cm below ground levels as per approved drawing and sign. (All the steel work must be (ii) 600mm circular
Painting Lines, Dashes, Arrows etc on Roads in Two Coats on New Work (Painting Lines, dashes, arrows etc on roads in two coats on new work with ready mixed road marking paint conforming to IS: 164 on bituminous surface, including cleaning the surface of all dirts, dusts and other foreign matter, demarcation at site and traffic control.) (ii) Up to 10cm in width.
ABHIJIT SONOWAL
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .