PERIODICAL SERVICES IN CERTAIN BLDGS EXTERNAL SURFACES AND OTHER BR WORKS IN DOMESTIC AREA UNDER GE AF JAMMU

M&L for preparation of old decorated surface of walls,scrapping down by mechanical means sender with internal dust extraction system for clean enviroment certified by manufacturer smoke ,soot,moulds,mos and efflorosent salt and trading oil and greese spotdown and stopping etc and applying two coat of exterior emulsion/ Apex paint over a coat of primer incl filling gaps with wall care putty and applied using airless spray technology and capable of operating single spray gun with a suitable hose length the spray machine should be reputed manufacturer with pro guard technology and capability of tracking pressure as well as paint and primer usage incl cleaning the floor ,joinary ,surfaces,usage complete all s specified and directed. Make: Asian Ultima protek/ Nerolac excel Excel top guard / Berger Paint weather Coat long life offering ten years guarantee NOTE:-1. After completion of welcome work scraped material,dust,droped paint,white wash,OBD etc will be cleaned by contractor by washing rubbing down and making good of surfaces. 2.Remove Kitchen reck,mirror etc and refix at its own existing place after painting work.

Taking down cement plaster up to 4th storey bldg ht.on Brick/stone walls and raking out joints, hacking for key, scrubbing down with water built in cement mortar.complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or over roof concrete surfaces mixed with integral water proofing compound finished even & smooth without using extra cement up to 4th storey bldg ht.complete all as specified and directed. Note : WPC shall be measured & paid seperately.

Supply only integral liquid water proofing compound ISI markedcomplete all as specified and directed.

M&L for Preparation of new plastered surfaces and applying two coats of exterial emulsion paint on walls including a thin layer of wall care putty,necessary formwork scaffolding required upto the 4th story complete all as specified and directed.

M&L for prepration of new/old surfaces of wall and apply 2-3mm wall care cement based putty (internal and external as per ground requirement) ,necessary formwork scaffolding required upto the 4th story as specified and directed

M&L for preparation of old decorated wooden surface,applying one coats of synthetic enamel paint on wooden surfaces including necessary filling material as required at site to make the surface smooth and even.complete all as spd and directed by Engr-in-charge.

M&L for preparation of old decorated surface of steel,applying one coats of synthetic enamel paint on steel surfaces including necessary filling material as required at site to make the surface smooth and even.complete all as spd and directed by Engr-in-charge.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars,drains etc, but excluding ashlars facings, dressed stone work and precast concrete articles.complete all as spd and direcetd.

M&L Brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in CM 1:4.complete all as spd and direcetd.

Taking down existing water proofing treatment with tarfelt including cement Plaster / HP tiles/ from roof or wall surfaces such as parapets / RCC fins of any type in any thickness including demolition of RCC tank/PVC tank and re-fixing the same with all required plumbing fittings like tank Nipple,float valve,tank cover,gate valves etc as per requirement of site and prepare the surface for new treatment.complete all as specified and directed by Engr-in-charge. Note :-Including Removal of debris or excavated material out of the defence line at govt approved dumping area and no extra cost will paid to the contractor against the same.

M&L for surface preparation & Cleaning the surface and made free of dirt, foregin particles laitance followed by grinding all protrusions to make surface modulated and including cement platering 20mm thick in cement mortar 1:4 incl mixing of liquid water proofing compound as per manufecturer instruction on surfaces of floor etc finished even and smooth without using extra cement and making strips of size 30cm x 30cm .Thereafter, inspection for cracks on the surface caused by thermal expantion contraction. Cutting the grooves with suitable cutter machine in 'V' groove filled with Repair mortar/Mircroconcrete/General purpose grout as recommended propertionaly as per recommendation of manufacturer. Making of Gollas at all the corners with Polymer modified mortar (1:4) Cement :Sand with 3.5% Acylic of Cement weight , Supplying and applying High build waterproofing coating based on pure hydrophobic polyurethane cold applied of spray /brush applied membrane with and elongation of 280% and tensile strength of 2.7 N/mm2 as per ASTM D 2370, crack bridging ability of 3mm, hardness (shore A scale) 80, solar reflectance of 84% as per A ASTM E903-96, SRI of 106, capilary absorption of 0.01kg/m2 h0.5 as per EN 1062-3, adhesion must be of ˃ 2.0 N/mm2 as per EN 1542, artificial weathering must be passed as per EN 1062-11 temprature resistance must be in between -300C to +900C, no leakage upto 5 bars of water pressure as per DIN 1048 mm min 88% solid content. The system includes final top coat of high build waterproofing coating based on pure hydrophobic polyurethane white in color application in 2 coats with a total min consumption of 1.5 Kg per SQM in ratio 60% 40% in both coats respectively over a coat of epoxy primer 1:1:2 (Resin:hardner:water) with a min consumption of 0.2 Kg per SQM. Application should be given by company for the product on company letterhead, complete all as specified and directed.

Dismantling unservicable /cracked water tanks and removing from site capacity exe 250 ltr n.exe 500 ltr.complete all as spd and direcetd.

Description all as per Item no 13 above but 1000 Ltrs capacity.complete all as spd and direcetd.

Supply and fixing in repairs Rotational moulded polythene water storage tanks (cylindered vertical closed top ) hoisted and fixed in position all as spd in SSR Part –I of capacity of tanks 500 ltr.complete all as spd and direcetd.

Discreption all as per Item no 15 above but 1000 Ltrs capacity.complete all as spd and direcetd.

S&F in repair Ball 20mm PVC float valves,high pressure,with polythene float and flynut complete,screwed for iron pipe or brass ferrule and fixed.complete all as spd and directed.

S&F in repair PVC Tank cover (thread type) for 500/1000 lit capacity.Complete all as spd and direcetd.

Taking up or down steel tubing for 15mm dia pipe and connections complete all as spd and directed by Engg-in-Charge

S&F 20mm dia Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings. with all fittings; (ISI marked) such as brass elbows, bends tees, nipples, union sockets, sockets etc and short pieces and fixed complete to walls and ceilings or laid in floors complete all as specified

Taking up or down steel tubing for 20mm dia pipe and connections complete all as spd and directed by Engg-in-Charge

S&F 25mm dia Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings. with all fittings; (ISI marked) such as brass elbows, bends tees, nipples, union sockets, sockets etc and short pieces and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Cutting chases,pinning for concealed water tubing of size 15mm dia and making good to facing where required and pointing in cement mortar 1;3 ,cutting n exc 10cm girth all as specified and as directed by Engineer-in -Charge.

M&L for colored non skid ceramic tiles 7to 8 mm thick, area of each tile n exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in colored cement over and incl 15 mm thick screed bed or bedding layers of cement mortar 1:6 (including hacking of floors) to match Shade, pattern, laying etc including taking down/demolition of existing tile/PCC Floor/Terrazo flooring including removal of debris out of the defence line at govt approved dumping area and no extra cost will be paid for the same.complete all as spd and as directed.

M&L for 300x600 x(7 to 8) mm thick coloured (Light & Dark Shade) glazed ceramic tiles of premium quality as in dado/ skirting and vertical surfaces set & jointed in neat cement slurry and pointed in colored cement over and incl 10 mm thick cement mortar 1:4 to match the Shade, pattern, laying at site including taking down of existing tile/plaster/terrazo dado including removal of debris out of the defence line at govt approved dumping area and no extra cost will be paid for the same complete all as spd and directed by Engr-in-charge.

M&L for pre- polished granite slab machine cut of any shade as approved by GE of 18-20 mm thick inc over cement screed bed including edge Moulding,rounding to shape Cutting and nosing with suitable hole for cylender gas pipe, kitchen sink ,WHB, Grinding and Machine polishing to edge to give high gloss finish (Granite finish) with suitable grinding stones and set in 15mm thick CM 1:4 in single piece for platform including taking down of existing tile work including removal of debris out of the defence line at govt approved dumping area and no extra cost will be paid for the same complete all as specified and as directed by Engr-in-charge.

Preparation of old painted surface of wall n.exc 0.5sqm in area and applying one coat of synthetic enamal paint and rewriting of bldg number by different colour as per requirement.complete all as specified and directed.

S &F in repair stainless steel 25mm dia fancy type curtain rods fixed to wall with two no's of bracket,two no's of end ball and funnel including taking down of existing curtain rod.complete all as specified and directed.

S & F for viterous china wash down water close (Pedestral pattern) EWC white and mild steels chromium plated or aluminium hinging device and connecting to 'P-trap' incl flush pipe 32mm dia connecting with flushing rim all as specified

S&F in Repair PVC seat cover for EWC white colour complete with MS Hinged cromium plated all as spd and directed by Engg-in-Charge

S&F in repairs 10 ltrs capacity PVC valveless syphonic action type flushing cistern low level with inlet ball valve float and handle complete all as specified .

S&F health faucet (ABS Body) mils steel CP sutabile for 15mm dia pipe with 1.25mtr long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and directed.

S&F in repaired Vitreous china wash hand basin, white , flat back, size 550 x 410X150 mm with brackets,wall hung wash basin with half pedstal height 440mm including cutting for and pinning in ends of brackets or erecting stand including bottle trap connected to 32mm pvc pipe.complete all as specified and directed.

S and F in repair stainless steel sink without draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 495mmx420mm with bowl size 410mm x330mm x 160mm complete all as specified and directed by Engineer-in- charge.

Supply and fixing in repair fancy type Angle valve/stop cock cast copper alloy cromium Plated (CP) 15mm dia screwed down high pressure with crutch or butter fly handles screwed both and iron pipe or for unions and fixed.complete all as spd and direcetd.

S&F in repair Brass CP wall mixer (3 in1 mixer) for Hot and cold for 15mm bore complete fixed to connection .complete all as spd and direcetd.

S&F in repair Brass CP Sink mixer for Hot and cold for 15mm bore complete fixed to connection .complete all as spd and direcetd.

S and F in repair 15mm dia Bib taps fancy type,Cromium plated(CP)with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed.complete all as spd and direcetd.

S&F in repair pillar double lever wash basin mixer (Hot nad cold) fancy type (swan neck) CP screwed down high pressure with or without lettered hot and cold with long screwed shanks and fly nut screwed for Iron pipe and fixed 15mm dia.complete all as spd and direcetd.

S&F shelf fixed with and including Chromium plated brass screws and cleats ( Minimum weight 300 gms).complete all as specified and directed by Engr in charge.

S&F in repairs PVC connection 15mm dia and 45cm long with two Nos of brass checknuts and washers complete all spd and directed.

S&F in repairs brass Choromium plated shower rose with or without swivel joints 125mm size including shower arm length of 450mm fixing to steel pipe or union complete all spd and direceted.

S&F stainless steel grating doom 125mm dia with waste hole.complete all as spd and directed.

S & F waste coupling of steel (half or full threaded) 32 mm dia complete all as specified and directed.

M & L for CPVC pipe of 32mm outer dia connecting to waste coupling with reducer,elbow,unions as per ground requirement fit to wash hand basin with waste coupling complete all as specified and directed.

S&F in repair soap dish,approximate size 160x160x90mm including Chromium plated brass screws and plastic cleats.complete all as specified and directed by Engr in charge.

S&F in repair Towel Rail 60 cm (D type) long of CP fixed with and including Chromium plated brass screws and plastic cleats ( Minimum weight 190 gms) .complete all as spd and directed.

SCHEDULE 'A' PART-II (Schedule of credit) Credit amount of Rs (Refer schedule of credit) for retrieved material mentioned in Sch 'A' Part-II of Tender documents in PDF form will be deducted offline during acceptance of tender of lowest bidder.