Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.9 LAccepted-AOC 0 MANPUR CHITBARAGAON CHITBARAGAON BALLIA UTTAR PRADESH 221713 | BALLIA | UTTAR PRADESH | 221713 | L1 | Accepted-AOC Being lowest bidder. | |
| 2 | L2₹29.8 L+₹78,495.70 (2.71%)Rejected-Finance | L2 | Rejected-Finance Being other than lowest bidder. | |
| 3 | L3₹30.2 L+₹1.2 L (4.03%)Rejected-Finance | L3 | Rejected-Finance Being other than lowest bidder. |
Tender Value
₹35.2 L
EMD Value
₹70,330
Closing Date
18 Oct 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF Jammu
GE AF Jammu Air Force Stn Jammu-180003
CA NO GE/AFJ-33/24-25 STRENGTHENING OF STRUCTURES AT OP LOCATION UNDER GE AF JAMMU JOB NO-WAC/OPWKS/06/23WG/2023-24
2024_MES_675471_1
CA NO GE/AFJ-33/24-25
Open Tender
Civil Works
Item Rate
270 days
JAMMU AND RAJOURI
Please refer tender document
8 documents required · 8 mandatory
₹500
GE AF JAMMU
₹70,330
Yes
19 Feb 2025
20 Sept 2024
21 Oct 2024
20 Sept 2024
18 Oct 2024
4 Oct 2024
Amount
Taking down cement plaster and raking out joints, hacking for key,scrubbing down with water built in cement mortar as directed by Engr-in-Charge.
Demolition of PCC in ground floors & pavings exc 15 cm thickness but above ground floors (unreinforced) as directed by Engr-in-Charge.
Taking down & Removing to Store Chowkats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) as directed by Engr-in-Charge.
Taking down Chowkats or frames exc 1.5 sq. m but n exc 4 sq m each with shutters (without taking off shutters from the frames) as directed by Engr-in-Charge.
Dismantling Wall & ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets as directed by Engr-in-Charge.
Dismantling of AC/ PVC drain pipes jointed in cement mortar and taking out from trenches or walls of any bore including fittings 100 mm dia. as directed by Engr-in-Charge.
Dismantling water tanks & removing to store exc 250 & n exc 500 litres as directed by Engr-in-Charge.
Taking up or down steel tubing & connections, including cleaning for re-fixing or removal to store of 15mm bore as directed by Engr-in-Charge.
Excavation in trenches in any type of soil n.exc 1.5m wide and n.exc 1.5m depth in foundations etc for manholes, sewage line and laying cable etc and getting out in any type of soil.complete all as specifed.
Description all as per srl N0-09 but depth exc 1.5m and not exc.3.00m directed by Engr-in-Charge.
Returning, filling in, including spreading, levelling, watering & well ramming in layers n. exc 25 cm in soft/loose soil directed by Engr-in-Charge.
Removing excavated soil n exc. 50m & depositing where directed at a level n exc. 1.5 m above the starting point
M&L for cutting openings, through brick walls built in CM or cement lime mortar for door, window and other openings or enlarging existing openings, converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing & removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc., to store and rubbish not exc. 50m all as specified and directed by Engr-in-Charge.
M&L for forming jambs, in cement mortar 1:4 etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete all as specified and directed by Engr-in-Charge.
M&L for rendering 15 mm thick in cement mortar 1: 4 on fair faces of brick work or concrete surfaces, finished even and smooth with out using extra cement, complete all as specified and directed.
M&L for rendering 15 mm thick in cement mortar 1: 6 on other than fair faces of brick work or concrete surfaces, finished even and smooth with out using extra cement, complete all as specified and directed.
Material and labour for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 including finishing the surfaces even and rough for wall tiles/finishes complete all as specified and as directed.
Material and labour for 15 mm thick screed bed or bedding layer in cement mortar 1:4 including finishing the surface even and rough for laying floor finishes/floor tiles complete all as specified and as directed by Engr-in-Charge.
M&L for injecting at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 50mm centre to centre and sealing the same complete all as specified and directed.
M&L for treatment of soil under existing floors using emulsion at the rate of one litre per hole 300 mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 to match with the existing floors all as specified and directed by Engr-in-Charge.
M&L for along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres / m including drilling & plugging holes etc. in apron all as specified and directed by Engr-in-Charge.
M&L PCC in foundations, filling and mass-concrete in sub base or in flooring etc type D2 (1:4:8) using 40 mm graded stone aggregate as in sub base all as specified.
M&L for hardcore of Broken stone/boulders gauge n exc. 63mm, deposited, spread & levelled in layers n exc. 15 cm thick, watered & rammed to a true surface
M&L 25mm thick PCC type B-1, (1:2:4) using 20mm graded stone aggregate as in floor etc all as specified and as directed.
M&L 100mm thick PCC type B-1, (1:2:4) using 20mm graded stone aggregate as in sub base of floor etc complete all as specified and as directed.
Material and labour Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius with old size bricks built in cement mortar 1:4 for manhole etc in same mortar as the work proceeds. Complete all as specified.
M&L for brickwork with sub-class `B' brick straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as pecified and as directed by Engr-in-Charge.
Use & waste formwork to sides of concrete foundations, footings, bases of columns, raft & raft beams, sides & soffits of foundation & plinth beams; and similar work; verticle or to batter Fair finished surfaces of concrete flat complete all as specified and directed.
Use and Waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; not exc. 200mm thick (Horizontal or sloping) Rough finished surfaces of concrete and form work for sides and soffits of beam,lintel beam complete all as specified and directed.
M&L for mild steeel TMT bars 10 mm dia and above cut to length bent to shape required including crancking bending spirally for hooping to columns hooking ends and binding with mild steel wire (annealed) n. less than 0.90mm dia all as specified and directed.
Description of all as irem No 30 but as in stirrups 8 mm dia etc complete all as specified and as directed by Engr-in-Charge.
M&L RCCM-25 using 20 mm graded aggregate in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete all as specified and as directed.
M&L RCCM-25 using 20 mm graded aggregate in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.
M&L RCC M-25 using 20 mm graded aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.
M&L for 75mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in plinth protection/ path finished even and smooth with out using extra cement including forming and filling of joints 12mm wide with bituminous filler all as directed at site.
M & L for non skid coloured ceramic tiles of 7 to 8 mm thick , area of each tile exceeding 0.18 sq m but not exceeding 0.38Sq m in floors set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match complete all as specified and as directed.
M & L for coloured glazed ceramic tiles of size 350mm x 250mm x 7or 450x300x7mm thick as in dado/vertical surfaces set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match complete all as specified and as directed.
S&F Pressed steel frames (Factory made) if 1.25mm thick mm black MS sheet for doors, with one or more rebates including necessary fixing lugs, Butt hinges, lock strike plate, etc complete, size of frame size 105x60mm incl one shop coat of red oxide zinc chrome primer,incl bottom of each chowkat to be welded with 2 Nos 25x25x3mm thick flat iron projecting 10 cm on either side and back fill to chowkahts with PCC 1:3:6 type C-0 using 12.5mm graded crushed stone aggregate after applying and including one coat of black paint to prevent from corrosion complete all as specified and directed by Engr-in-Charge.
S&F 35mm Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides deco rative face veneer with lipping/frame to match complete all as specifed and directed.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, in opening as per specification & drawing
S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, & joined together with solvent cement, in the frame at site as per specification & drawing.
S&F aluminum anodized barrel tower bolt of extruded section and fixed complete of Size 200 mm long complete all as specified.
S&F aluminum Handle cast type anodized of size 150mm complete all as specified.
S&F butt hinges 100mm size, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type B-21 complete all as specified and directed.
S&F Butt hinges 100mm size, medium weight, cold rolled mild steel complete all as specifed and directed.
S&F Mild steel sliding door bolts 300mm long, plate type, stove enamelled black, with bright bolt not less than 12mm dia with & including a minimum of 6 bolts & nuts, four on bolt plate & two on staple plate all as directed.
S&F Mild steel barrel tower blots 200mm long, stove enamelled black, with bright bolt complete all as specifed and as directed.
S & F for non asbestos fibre cement building board 6mm thick fixed or laid inserted to aluminium frame work with screw fixed in celling flat and including Galvanized iron with aluminum coating snap grid frame work (size of grid 605x605mm) with fasteners, supports, Hangers 6mm dia G.I (upto 1200mm length ) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I flat 40X3mm size 60mm longplugs to ceiling including two coats of oilbound distemper complete as per manufacturer instructions and as directed by Engr-in-Charge.
S&F GI tubes 15mm bore, `medium grade' with all fitting & fixed complete to walls & ceilings or laid in floors complete all as specified and as directed.
S&F GI tubes, `medium grade' with all fitting & fixed complete to walls & ceilings or laid in floors of 20mm bore complete all as specified and as directed.
Material and labour for cutting chases, pinning in, making good to facing of brick wall where required and pointing in CM 1:3 to ends of edges of landing etc and cutting chases for concealed water tubing and making good, cutting exceeding 10 cm but nor exceeding 20 cm girth in brick waqll masonary complete all as specified and as directed.
S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern & flush pipe)complete all as specifed and as directed by Engr-in-Chagre.
S&F Vitreous china wash hand basin, white , flat back, size 580 x 450 mm with brackets, including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed.
S&F PVC flushing cistern low level 10 ltr capacity with inlet ball valve, float valve and handle including brackets and pipe connecting to WC etc including all fittings and all as specified, including dismantling old flushing cistern any type complete all as specified and as directed.
S&F heath faucet(ABS Body) mils steel CP sutabile for 15mm dia pipe with 1.25mtr long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and directed.
S&F chromium plated stop cock/angle valve with crutch or butterfly handle, screwed down, high pressure screwed both ends for 15 mm bore iron pipe or for unions and fixed complete, all as specified.
S&F bib tap 15mm chromium plated fancy type cast cooper alloy with crutch or butter fly handle, screwed down for iron pipe and fixed complete all as specified and directed.
S&F in repair CP Bib taps 15 mm bore, cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule complete all as specifed and as directed.
S&F PVC connection 45 cm long fitted with PTMT nut and washer on both ends, fixed to 15 mm bore iron pipes complete all as specifed and as directed.
Supply and fixing brass chromium plated center hole mixer for hot and cold water with capstan heads, screwed downhigh pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipes 15 mm dia complete all as specified and as directed.
S&F PVC mirror with cabinet shelf 450x600mm including screws and fixing on wall complete all as specified.
S&F grating doom 125mm dia with waste hole of PTMT (Min wt 40 gms) complete all as specified and as directed.
S & F waste coupling of PTMT (half or full threaded) 32 mm dia.complete all as specified and as directed.
M & L for PVC waste pipe 32 mm dia flexible with cup to fit wash hand basin waste coupling complete all as specified and directed.
Supply and fixing of soap-dish chromium plated all as specified and directed.
S&F of stainless steel towel ring complete all as specifed and as directed.
S&F chromium plated peg set of six incliding fixing with CP plated screw etc. Complete all as specified and as directed.
Supply & fixing rotational moulded polyethylene water storage tank - 500 liters (three layer)capacity (cylidrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I incl PTMT float valve 20mm dia.( Note weight of 500 ltr water tank shall be as per IS specifications ) complete all as specified and as directed.
Supply & fixing rotational moulded polyethylene water storage tank - 1000 liters (three layer)capacity (cylidrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I incl PTMT float valve 20mm dia.( Note weight of 1000 ltr water tank shall be as per IS specifications ) complete all as specified and as directed.
Supply & fixing rotational moulded polyethylene water storage tank - 2000 liters (three layer)capacity (cylidrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I incl PTMT float valve 20mm dia..( Note weight of 2000 ltr water tank shall be as per IS specifications )complete all as specified and as directed.
S & F PVC (SWR) bends of any radius with access door bore of pipe 110 mm all as specified and as directed.
S & F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls bore of pipe 110 mm with PVC clamps and saddles complete all as specified and as directed.
S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.
S&F 75mm bore PVC (SWR) bends with access door any radius complete all as specified and as directed.
M&L 75mm bore PVC (SWR) floor trap, plain with CP grating including jointing with solvent cement complete all as specified and as directed.
M&L PVC (SWR) multifloor trap 75mm dia with grating including jointing with solvent cement complete all as specified and as directed.
S&F PVC (SWR) vent cowl 75mm
S&F PVC (SWR), junction single, (Single T) equal or unequal 75mm dia
S&F PVC (SWR), junction single, (Single T) equal or unequal 110mm dia
S&F PVC (SWR) reducers 110mm dia
S&F PVC (SWR) reducers 75mm dia
M&L for 3mm thick wall care putty on wall surfaces including necessary preparation etc complete all as specified and as directed.
M&L for applying two coats of distemper oil emulsion, white or tinted on old wall surface including preparation of surface complete all as specified and directed.
M&L for applying two coats of distemper oil emulsion, white or tinted over newly plastered or putty treated surfaces complete all as specified and as directed.
M&L for preparation of new or old untreated previous surfaces and applying one coat of primer and applying two coats of exterior quality paint in camofalging pattern make:- Asian Ultima protek/Nerolac excel top guard/Berger paint weather coat long life with offering 10yrs gurantee(with RGB value) in any tint on melbow width like roof projection facia chhajja etc) all as per manufacturer instruction and complete all as specified and as directed.
M&L for applying one coat of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old painted surface complete all as specified and as directed.
M&L for applying one coat of synthetic enamel paint on steel & iron surfaces of any description(roof sheet corrugated or semicorrugated surfaces), not otherwise, described, over 10cm width or girth including preparation of old painted surface complete all as specified and as directed.
Applying one coat of Red oxide Zinc chrome on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old exposed painted surface complete all as specified and as directed.
M&L for preparation of old painted surface applying two coat of anti-corrossive paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth complete all as specified and as directed.
S&F 1.5mm thick self adhesive membrane with one side protective layer of geotextile fiber on exposed surface over priming surface with water base primer ( The membrane shall have properties of self healing and shall sustain temprature variation from 50 degree C to -10 degree C and consisting Butadyne styline end overlaps shall be not less than 150mm and side lap 75 mm all as specified and as directed. Note:- Primer shall be applied at the rate of 250gram/Sqm.
M&L for sand filling in bags (each bag containing minimum of 0.05 Cum of sand including sand bag) and olacing where where directed by Engr-in-Charge complete all as specified,
M&L for PCC (1:3:6) type C-2 as concrete bed to 150mm dia drain pipes including packing under, & haunching against the sides of pipes after they are laid & tested complete all as specified and as directed.
M&L PCC type B1 (1:2:4) using 20 mm graded aggregate as in hanuching & other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directed
M&L Reinforced concrete pipes 150mm dia, class NP2, laid & jointed complete with collars all as specified and directed by Engr-in-Charge.
S&F PVC (SWR) pipes 100mm bore double socketed, in any length with rubber ring joints laid in trenches or in floors all as specified and as directed by Engr-in-Charge.
S&F PVC (SWR) bends any radius 110mm dia
Dismantling of Stone slabs & tiles of any description or thickness in floors, aprons etc. Laid, bedded & pointed in any mortar complete all as specified and as directed.
Demolition of PCC in ground floors & pavings n exc 15 cm thickness (below or above ground level) (unreinforced) complete all as specified and as directed by Engr-in-Charge.
M&L for PCC.1:3:6 type C2 as in drain all as specified and as directed by Engr-in-Charge.
M&L for pre cast solid block massonary PCC 1:3:6 type C1 exc. 10cm in width setting CM 1:4 complete all as specified and as directed by Engr-in-Charge.
M&L for extra forming fair finsihed drain or channel 30cm inner girth in cement concrete complete all as specified and as directed.
Add or deduct for each 25 mm girth or part thereof over or under 30 cm complete all as specified and as directed by Engr-in-Charge.
S&F framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and as directed by Engr-in-Chagre.
M&L,preparation of newely steel surfaces exc 10cm width or girth and applying 2 coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.
M&L PCC type B-1 (1:2:4)using 20mm graded aggregate in lintels upto 1.5 m clear span, cills, steps; seismic & other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directed.
Refixing/laying of machine precast concrete interlocking paver block as obtained of any size complete all as specified and as directed Note:-Old retrieved tiles shall be refixed only after level is raised.
M&L for sand filling under floors or in foundation including watering and consolidation complete all as specified and as directed.
M&L PCC type C2(1:3:6) using 40 mm graded stone aggregate in foundations,filling and mass concrete in sub base complete all as specified and as directed by Engr-in-Chagre.
Taking down carefully unserviceable copper/aluminium point wiring (light, fan, socket or power)complete including fixture and fitting such as switches, ceiling rose lamp holder, regulators, sockets, light fittings, wooden terminal boxes, plastic laminated sheet cover, including taking down of DB’s, meter board any type all as specified and as directed.
Point wiring for one light point/ fan point controlled by one switch with 1.5 sqmm FRLS PVC insulated unsheathed copper condector single core multi strand flexible cable and 1.5 Sqmm flrs PVC insulated unsheathed copper conductor single core cable (green colour) as earth lead in and including concealed non metallic rigid PVC conduit medium grade with all fittings ( ISI marked ) controlled by one switch including CI/MS sunk box required size & as directed by Engr-in-Charge with 3 mm thick plastic laminated sheet, including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified and directed.
M&L for one light point controlled by one switch.
M&L for one wall fan/ceiling fan/Exhaust fan point controlled by one switch.
M&L for one 3 pin socket outlet point 5 Amps on independent, with cables 2.5 sq. mm size .
M&L for one 3 Pin socket outlet point 5 Amps on the same board with other .
M&L for one 3 pin socket outlet point 15 Amps on independent, with cables 2.5 sq. mm size.
Supply and fixing for energy saving environmental friendly, LED tubelight fittings 20 watts 1200 mm (Aluminium body) long life, impact proof, surface/wall mounting IP 20, 95 luminaries per watt, extruded aluminium housing with frosted PMPA diffuser high brightness LEDs complete with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable size with ceiling rose complete all as specified and directed.
S & F socket outlet 6 pin 16 Amps flush type complete all as specified and directed.
S & F socket outlet 5 pin 6 Amps flush type complete all as specified and directed.
S & F switch piano flush button single pole one way 16 amps complete all as specified and directed.
S & F switch (piano) flush button single pole one way 6 amps complete all as specified and directed.
S & F ceiling rose surface bakelite 2 to 3 terminals 65 x 50mm complete all as specified and as directed by Engineer-in-Charge.
S & F in repair Lamp holder, PVC/Polycarbonate type with back plate and 12W LED Lamp suitable for batten fittings complete incl taking down old unserviceable complete all as specified and as directed.
Supply and fixing for energy saving environmental friendly, LED bulkhead lights fittings 10 watts long life, impact proof, surface/wall mounting IP 65, extruded aluminium housing with frosted PMPA diffuser high brightness LEDs complete with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable complete all as specified and directed.
S & F sheet metal enclousers for MCBs Single pole & neutral 240 Volt, 4 ways, double door type complete all as specified and directed by Engineer-in-Charge.
S & F sheet metal enclousers for MCBs Single pole & neutral 240 Volt, 8 ways, double door type complete all as specified and directed by Enigneer-in-Charge.
Supply and fixing for energy saving environmental friendly, LED tubelight fittings 10 watts (Aluminium body) long life, impact proof, surface/wall mounting IP 20, 95 luminaries per watt, extruded aluminium housing with frosted PMPA diffuser high brightness LEDs complete with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable size with ceiling rose complete all as specified and directed.
Supply , laying and testing cable XLPE Insulated , screened, PVC bedded, Galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 Sqmm 3.5 core nominal cross section in service coonections complete all as specified and directed.
M & L sand cushioning with river washed and screened dry fine sand to under ground cable 23 cm thick, 8 cm below the cable and 15 cm after laying the cable, duly punned complete.
Supply and fixing MCB DB sheet metal box double door TPN 4-Way, 415 Volts, suitable for four pole MCCB 125/160 Amp concealed to wall and making flush with wall surfaces and making good to disturbed surfaces of walls to match with the existing surface etc incl taking down the old DBs incl taking down old unserviceable item complete all as specified and as directed.
Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and directed.
Supply and Fixing Rigid non-metallic PVC conduit of size 20mm exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc.
Supply and fixing stepped type electronic fan Regulator flush type on the phenolic laminated sheet etc as required.
Supply and laying of DWC (Double Wall Corrugated) HDPE Pipe, ISI Marked IS 16205 Part-II, of outer dia of 90 mm and inner dia 76 mm with smooth internal and profiled external surface for non pressure under ground cable including all connected accessories like coupler, 'O' Ring etc, for protection of cable complete all as specified and as directed
Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated with stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and over all PVC sheathed 06 sqmm 02 core nominal cross section in service connections complete all as specified and directed by Engr-in-Charge.
Supply and fixing MCCB TPN 100 Amps, 16KA, 415 Volts complete incl taking down old unserviceable.
Supply and fixing 36/40 watts recess /pendant mounting ultraslim LED flat panel 2' X 2' made of extruded aluminium frame with high LEDs & glare free opal diffuser IP20 incl taking down old UNSV.
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.
Earthing complete with galvanised steel earth plate electrode 60×60cm× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised iron strip25X4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel protected by provision of GI light grade pipe 15mm bore incl provision of concrete pit in PCC 1:2:4 type B-I,using 20 mm graded stone aggregates with 40mm thick cover of RCC(1:2:4) reinforced with XPM weight not less tyhan 4 Kg/Sqm and 6mmdia bar handle ,excavation and earth work in any type of soil ,charcoal dust and salt light grade GI watering pipe 20mm bore with funnel and wire mashand medium grade GI protection pipe 15mm bore 5Mtr long and GI strip upto main earthing of pole complete all as shown in electrical plate No 3of MES Sch 2009 Part-I all as specified and directed. Note: Upto 7.5 mtr length of pipe of 20mm bore GI tubing and GI wire shall be deemed to be included in unit rate quoted by tenderer.
Supply and fix Exhaust fan with louvers of size 300mm sweep, voltage 230V, 50 Hz, RPM 900, single phase AC supply Copper winding complete with , bolts, nuts, and washer all as specified and directed by Engr-in-Charge.
Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FRLS is PVC insulated copper conductor, single core cable in surface/ recessed as required 2X6 Sqmm copper conductor with 6 Sqmm earth wire lead PVC insulated unsheathed stranded copper conductor cable and connected to earth dolly to be drawn in concealed PVC conduit including connecting to main board complete all as specified and directed by Engineer-in-Charge. Note:- Conduit will be measured and paid separately.
Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SP 5 to 32 Amp following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning.
Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 32 Amp following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning.
Almirah large steel with shelves(FD-1031)
Almirah small steel with shelves(FD-1032)
Riffle rack for 20 rifles(5.56mm INSAS &AK-47(fixed butt/side folding butt)/X-calibre 1 tier single lock system.Protection of rifle from scratch by using threads 'U' shaped pads in groove.Material for manufacturing of rack except base-12 SWG and 14 SWG MS angle of size 25X25X5mm and 35X35X5mm ,colour of rifle rack -Olive green.
Table dining for 08 person (FD-376)
Chair dining (FD-279)
SCHEDULE 'A' PART-II (Schedule of credit) Credit amount of Rs (Refer schedule of credit) for retrieved material mentioned in Sch 'A' Part-II of Tender documents in PDF form will be deducted offline during acceptance of tender of lowest bidder.
SUNIL KUMAR SANGEET KUMAR AND SONS (BID ID -3133892)
MEELU ENTERPRISES (BID ID -3143316)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .