REPAIRS TO FENCING, DRAIN, PATH AND HARDSTANDING AT ILP-II, ALBERT EKKA ENCLAVE AND ADJACENT AREA IN AOR OF AGE B/R-I UNDER GE PANAGARH

Amount

Demolition for brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, facings, dressed stonework and precast concrete articles and removal or rubbish off the site complete all as specified and directed.

M&L for old size brick work with fly ash bricks straight or curved on plan exc 6 m mean radius build in CM (1:4) for drain complete all as specified and directed

M&L for old size brickwork with flyash bricks, straight or curved on plan exc 6m mean radius, half bricks thick built in CM (1:4) complete all as specified and directed

All asper ser item No 3.00 mentioned above but except bricks. Note: Servicable bricks obtained from demolition shall be re-used after proper cleaning.

M&L for hardcore broken stone aggregate of gauge not exceeding 63 mm of broken stone, deposited, spread and levelled layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed

M&L for PCC in foundation filling and mass concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) complete all as specified and directed

M&L for cement concrete type B-1 1:2:4 (using 20mm graded stone aggregate) in cills, steps, plinth courses, string courses, lacing courses, parapets, copings, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directed rounded or chamfered on edges complete all as specified and directed

M&L for cement concrete type C-1, 1:3:6 (using 20 mm graded stone aggregate) in surface channels and drains for benching complete all as specified and directed

M&L for extra for forming fair finish drain channel inner girth not exc 30 cm in cement concrete using extra cement complete all as specified and directed

M&L for extra for forming fair finish drain channel inner grith exc 30cm but n.exc 45 cm in cement concrete using extra cement complete all as specified and directed

Dismantling post (Wood/Steel or RCC) any section including taking out embedded portion in concrete, brick work , masonry etc, and making good disturbed portion complete all as specified and directed

M&L for Plain Cement concrete type C-1, 1:3:6 (using 20 mm graded stone aggregate) as in foundations, filling and mass concrete or for sides of posts complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed

S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed

S&F Framed work such as grills, gratings, or in Flat iron etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc complete all as specified and directed

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed

Taking down cement or cement lime plaster, any descriptio on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etcomplete all as specified and directed

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4) and finish smooth & even with using extra cement complete all as specified and directed

M&L for preparation on new plastered surface of brick walls, chajja, parapet etc and applying two coats of cement base paint over a coat primer etc complete all as specified and as directed.

M&L for two coats of synthetic enamel paint on new surface over one coat of red oxide primer including preparation of surface of any description, over 10 cm in width or girth not other wise described all as specified and directed by Engr-in-Charge.

M&L for preparation of old painted of steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Dismantling fencing wire mesh any type complete all as apecified and directed by Engineer- in -Charge

S&F galvanised iron wire using hot dip technology electrogalvanised coating chain link fencing wire mesh of size 75mm X 75mm having minimum dia of wire 3 mm conforming to IS 2712-2003 having a tensile strength of 400 to 500 MPa. The mesh wire and line wire of the fabric shall be manufactured from ISI marked (Make- TATA wireon) galvanized steel conforming to IS-280:2006 (4th Rivision). The kunckled ends should be atleast 50% of the size of square mesh. The wires used in fencing should be long lasting and resistance to corrosion and testing criteria fulfill the requirement as per IS 1161:1998 complete all as specified and directed.

S&F mild steel screw bolts (machine made)with hexagonal or square heads at one end and screw other .and each screw end to be fixed with washers and nut exc 5 cm but n.exc 10 cm long complete all as specified and directed

M&L for mild steel round bars 10mm dia and over, cut to length bent to shape required including cranking bending spirally for hooping for column, hooking end binding with binding wire and including mild steel wire(annealed) not less than 0.9mm dia complete using Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde E-165) complete all as specified and directed

Demolition of concrete (unreinforced) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) and removal of rubbish off the site complete all as specified and directed

M&L for 75 mm thick cement concrete type B1, for PCC (1:2:4) (using 20 mm graded stone aggregate) as in floors and pavings etc finishing cement concrete surface without using extra cement complete all as specified and as directed.

M&L for 75 mm thick cement concrete type D-2, for PCC (1:4:8) using 40 mm graded aggregate as in sub base,etc complete all as specified and as directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness M-35 Grade complete all as specified and directed

M&L for machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 80 mm thickness M-40 Grade complete all as specified and directed

M&L for 25 mm thick chequered cement concrete tiles of approved size, set ,jointed and pointed using with grey cement and pigment in floors, pavings etc including the setting and jointing in neat cement plaster or slurry 0.3 kg/sqm over 20mm thick screed bed or bedding layer in cement mortar 1:6 complete all as per specification.

Dismantling of old barbed wire and making rolls including stacking neatly complete all as specified and directed by Engr-in-Charge.

S&F galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc as directed (each line wire to be measured ), complete all as specified and directed

Restraining resecuring including making good staples etc, galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc as directed (each line wire to be measured ) complete all as specified and directed

S&F Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia (6 metre openable length of each coil) having 50 nos rounds per 6 metre length, spring core wire (2.5 mm thick)of high tensile strength of 165kg/sq.mm with tape (0.52mm thick blade) and weight 43.478 gm/metre and fixing the same with existing Y-shape angle iron placed 2m apart and with 6 horizontal R.B.T. (Reinforced Barbed Tape)wire, stud tied with G.I.staple and G.I.clips to retain horizontal, including necessary bolts including dismantling of old coil fencing complete all as per directed by Engr-in-charge Note: (1) 2.5mm dia horizontal R.B.T. (Reinforced Barbed Tape) wire shall be measured and paid separately under supply only. (2) Total height of boundary wall including concertina coil fencing will be about 10feet from existing ground level.

Supply only 2.5mm dia R.B.T. (Reinforced Barbed Tape) wire with 0.52mm blade complete all as specified and directed

Demolition of cement concrete (reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removal of rubbish off the site complete all as specified and directed

M&L for providing RCC precast cement concrete type B-1 (1:2:4) (using 20 mm graded stone aggregate) as in cover slab for drains and similar article with plain face set in cement mortar (1:4) complete all as specified and directed

M&L for mild steel TMT bar 10mm dia and over, cut to length bent to shape required including cranking bending spirally for hooping for column, hooking end binding with binding wire and including mild steel wire(annealed) not less than 0.9mm dia complete all as specified & directed by Engr-in-Charge

S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or in weep holes etc incl taking down old pipes complete all as specified and as directed by Engr-in-Charge.

M/S TILKU ENTERPRISE (BID ID -3071289)

M/S PROVAS GHOSH (BID ID -3071321)

M/S DYNAMIC INDIA (PROJECT) CONSTRUCTION (BID ID -3071358)

M/S BHATTACHARJEE ENTERPRISE (BID ID -3071337)

S.P.S. SUPPLIERS (BID ID -3071349)

N B CONSTRUCTION (BID ID -3071376)

SANJAY KUMAR SUPAN (BID ID -3071584)

KAZI SAHABUL ALAM (BID ID -3071591)