Repair works to Commissioner / Junior Engineer Staff Quarters at Thenkaraipet in Kottucherry Commune

Amount

Finishing walls with water proofing cement paint of required shade - Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litres/10 sqm complete including cost of priming coat.

White washing with lime to give on even shade - New work (three or more coats).

Providing, laying and jointing UPVC pipes(Finolex/Jain) (1 Mpa)conforming to IS specification 4985 and ISI marked including transportation to the site , lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment,including cost of solvent cement,UPVC specials such as bends,tees, threaded pieces,couplers,reducer,endcaps etc.,complete all as per IS and CPWD specification. - 50mm dia.

Providing and fixing GI pipes complete with GI fittings and clamps including cutting and making good the walls etc.Intermnal work - exposed on wall 20 mm dia nominal bore.

Providing and fixing ball valve (brass) of approved quality complete. high or low pressure with plastic floats - 25 mm nominal bore.

Providing and fixing brass bib cock of approved quality - 15mm nominal bore

40W box type single tube light fitting with copper choke & starter without tube. Make: Philips/Bajaj

1200mm sweep double ball bearing ceiling fan.Make:Almonard/Usha

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade - One or more coats on old work.

Constructing soak pit 1.20 x 1.20 x 1.20 m soak pit filled with brick bats including 110mm dia UPVC pipe (type B) 1.20 m long complete as per standard design.

Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead -With cement mortar 1:4 (1 cement : 4 coarse sand).

Floor polishing on masonry or concrete floors with wax polish of approved brand and manufacture.

Providing and fixing glazed shutters for doors , windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S.pressed butt hinges bright finished of required size with necessary screws -Kiln seasoned and chemically treated Vengai wood - 35mm thick.

Providing and fixing panelling or panelling and glazing in panelled or panelled andglazed shutters for doors , windows andclerestory windows (area of opening for panel inserts excluding portion insidegrooves or rebates to be measured).Panelling for panelled or panelled andglazed shutters 25 mm to 40 mm thick -Vengai wood.

Providing and fixing aluminium tower bolts , ISI marked , anodised (anodic coating notless than grade AC 10 as per IS :1868) ,transparent or dyed to required colour orshade , with necessary screws etc. complete- 250 x10 mm.

Providing and fixing aluminium handles , ISI marked , anodised (anodic coating notless than grade AC 10 as per IS : 1868)transparent or dyed to required colour or shade,with necessary screws etc, complete -125 mm

Providing and fixing of 65mm Godrej Navatal lock of 6 levers etc complete

Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps ,32mm C.P.brass waste of standard pattern ,including painting of fittings and brackets,cutting and making good the walls whereverrequired - white vitreous china flat backwash basin size 550x400 mm with single 15mmC.P. brass pillar tap.

Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubberplug, 40mm C.P. brass waste complete,including painting the fittings and brackets, cutting and making good the wallswherever required - white glazed fire claykitchen sink of size 600x450x250mm.

Providing and fixing factory made uPVC door , made of uPVC exturded sections , ofsize 65 mm x 55 mm with wall thickness 2.0mm (+- 0.2 mm) , corners of the door frameto be mitred cut and jointed with plasticbrackets and stainless steel screws ,reinforcing hinge side vertical of theframes with PVC profile of size 28 mm x 30mm having wall thickness 2 mm (+- 0.2 mm ), including providing & fixing 3 nos of 125mm long stainless steel hinges to the frame, fixing the frame with jamb with requirednumber & size of anchor dash fasteners ,all complete as per manufacturer ' specification.

Providing and fixing 37 mm thick factory made PVC door shutter , styles and railsmade of PVC hollow section of size 100 mm x37 mm with wall thickness 2 mm (+- 0.2 mm )with inbuilt bead on one side , styles andrails mitered cut and joint at the cornersby means of 2 nos of plastic brackets ofsize 75 mm x 220 mm at each corner andstainless steel screws , reinforcing thehinge side of style by inserting PVCProfile of size 28 mm x 30 mm , with wallthickness 2 mm (+- 0.2 mm) . Lock rail ofsize 100 mm x 37 mm , wall thickness 2 mm(+- 0.2 mm ) will be fixed to the verticalstyles . Providing with PVC snapfit beadsand panel of size 100 mm x 20mm , andinserting 2 nos tie bar of 6 mm dia andfastening with nuts and washers complete ,all as per manufacturer's specification.

Supplying and filling with red earth (excluding rock) including cost and conveyance to the work site and stacking tothe departmental gauge , spreading in layers not exceeding 20cm in depth ,watering and consolidation using 0.5 tonne roller , or wooden or steel rammers etc.complete for making play fields , running tracks and court yards.

MARIAPPAN C