Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹2.5 Cr
EMD Value
₹3.8 L
Closing Date
14 Nov 2024, 10:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Chamundeshwari Electricity Supply Corporation Limited
Yogesh C
Construction of fourth floor at Corporate office and allied works (facelift) at Hinkal, Mysuru
CESCOM/2024-25/BD/WORK_INDENT162
CESCOM/2024-25/BD/WORK_INDENT162
Open
Buildings
Two Tender Document System(Two Cover)
CESCOM Superintending Engineer Procurement Corporate Office Mysuru
11 documents required · 11 mandatory
Satisfactorily completed as a prime contractor at least one similar nature of work like construction of building works in any one of the above financial years amounting to Rs.125.70 lakhs in any of the Government/KPTCL/ESCOMS/Public undertaking/ Order copies/ certificates issued from the cadre of not less than the rank of Executive Engineer in last 5 years shall be scanned and uploaded
In past 5 years, Executed in any one year the following minimum quantities of work. 1.PCC/RCC-460.00 Cum 2.BrickMasonry-160.00 Cum 3. Steel -48.00 Tonne 4. Flooring-1200.00 Sqm 5.Plastering-3640.00 Sqm
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
The bidder shall be registered KPWD/ CPWD of appropriate Class & above contractor
Achieved, in at least two financial years, a minimum annual financial turnover of Rs.502.80 lakhs (in all classes of civil engineering construction works only). Reports on the financial standing of the tenderer, such as profit and loss statements, Balance sheets, Annual turnover certificate certified by chartered Accountant and auditors reports for the last 5 years i.e. 2019-20 to 2023-24 shall be uploaded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditors reports for the last five years shall be uploaded
The Tenderer or his identified sub-contractor should possess required valid electrical license for executing building electrification works and should have executed similar electrical works totaling Rs.5.98 Lakhs (usually not less than 50% of electrical works) in any one year (or through licensed electrical contractor)
The Tenderer or his identified sub-contractor should possess valid license for executing water supply/sanitary engineering works and should have executed similar water supply/sanitary engineering works totaling Rs.2.00 Lakhs (usually not less than 50% of the water supply/sanitary engineering works) in any one year.
The Bidder shall submit valid IT PAN card and Latest Indian Income Tax return verification form Form ITRV
The line of credit should be produced not less than Rs.75.42 Lakhs drawn on or after 23.10.2024 in the name of General Manager(Procurement), Corporate office, CESC, Mysuru issued by Nationalised/Scheduled Bank
The Bidder shall submit valid EPF registration certificate. . Scanned notarized copies shall be uploaded for the period of last 3months prior to uploadation of the bid
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
The Bidder shall submit valid GST registration Certificate.
The bidder who intends to participate in the tender process should compulsory visit the site & obtain site visit certificate from the Engineer in-charge & same to be uploaded
₹5,000
₹3.8 L
24 Oct 2024
24 Oct 2024
15 Nov 2024
8 Nov 2024
5 Nov 2024
Construction of fourth floor at Corporate office and allied works (facelift) at Hinkal, Mysuru
Providing and laying in position Reinforced cement concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Beams and Lintels of Buildings
Roof (Straight & Arched)
Chejjas, Canopy & Other Architectural projections of minor sections
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) inc...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...
Providing 12 mm cement plaster with cement mortar 1:4 (1 cement:4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, inc...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...
Providing& fixing of Openable window made out of multi chambered UPVC Matching to RAL-9016 sections and with minimum TiO2Titanium Dioxide at 6PHR with TPV Thermo Plastic Vulcanized and lead free with ...
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitti...
Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Iv...
roviding and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle gree...
Providing and applying white cement based putty of average thick ness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per s...
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remov...
Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of ap proved brand and manufacture, including applying additional coats wherever re...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...
Painting with synthetic enamel paint of approved brand and manu facture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appr...
KSRB 15.8.2 Providing and fixing plaster mesh 150mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120gms per sqm width, along route of walls ch...
Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped...
Demolishing R.C.C. work manually by mechanical means including stacking of steel bars and disposal of unserviceable material to the appropriate
disposal area as per direction of Engineer-in-charge.
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-...
Dismantling tile work in floors and roofs laid in cement mortar including stacking material to the appropriate disposal area as per direction of Engineer-in-charge. ismantling tile work in floors and ...
Dismantling of truss work provided to the skylight and other allied works including stacking the materials to appropriate disposal area as per the direction of the Engineer in charge of the work.
Removing, Shifting & re assembling of existing AC units with all necessary arrangements including cost of labour, materials etc complete as per the directions of the Engineer in charge of the work.
Removing, Shifting & re assembling of existing water pipe lines with all necessary arrangements including cost of labour, materials etc complete as per the directions of the Engineer in charge of th...
Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...
Providing and laying in position yelahanka tiles of size 250 x 250mm of approved quality and make, over a bed of cement mortar 1:3 an average thickness 25mm over weather proof course and pointed with ...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a prim ing coat of approved steel primer using structural steel e...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for not and cold water supply including all CPVC plain and brass threaded fittings inc...
Providing and placing on terrace, polyethylene water storage tanks with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flow pipes, includin...
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :25 mm nominal bore
Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...
Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaste...
Providing and constructing “WIRE CUT BRICK MACHINEHOLE CHAMBERS” using Portland/Pozzolana cement, conical in shape at top, with CC 1:3:6 foundation using 40mm and down size graded metal of approve...
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually c...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders wi...
Providing and fixing water closet squatting pan Indian type W.C. pan with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually contr...
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with t...
Providing and fixing mirror of superior glass of approved quality and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Providing and ...
Providing and fixing to wall, ceiling and floor, high density polyethylene pipes 6.00 kgf sq.cm working pressure 140mm outside diameter with special flange, compression type fittings, wall clips, maki...
Providing and fixing on wall surface. 4.0 kg sq.cm H.D.P.E. rain down water pipes 110mm outer dia. approved make and brand with necessary specials like shoes, bends and offsets fixed with iron clamps,...
Providing and fixing 75mm to 150mm dia NP grating
Supplying heavy gauge PVC conduit pipe 19/20 mm dia 2 mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. Th...
25mm dia 2 mm thick
Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete
Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using copper PVC insulated multistrand 2X1.5 Sqmm copper wire with a 6 Amps flush type SP control switch shall be fixed...
Medium point above 3 Mtrs Upto 6 Mtrs from tapping point to outlet via switch
Long point above 6 Mtrs Upto 10 Mtrs from tapping point to outlet via switch
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ...
Supplying and fixing PVC/metal conduit Deep junction box 19/20mm deep junction box
25mm deep junction box
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Wiring for lighting/power circuit using one of PVC insulated 1100V grade,multistrand Copper conductor single core cable in open or concealed system of wiring (a) 1.5 Sqmm
Supplying and fixing of modular switch/socket/stepped electronic regulator/dimmer/telephone socket etc on existing modular switch plate.(P-8;I-18) (a) 6 Amps 3 way socket
Stepped fan regulator
32 Amps DP switch
6/16A Universal Socket
TV/Telephone Socket
6Amps one way Switch
Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker (ELMCB) 240/450V upto 300mA sensitivity on existing wood/panel board. (16-25 A 2 pole)
Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 pha...
Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the mter board using 40mm dia 2.90mm thick GI pipe 2.5metr long buried in a pit. The pit should ...
Supplying of LT UG cables having aluminium conductor PVC insulated sheathed, galvanised, steel wire/steel tape armoured cable with PVC outer sheathing 1.1 KV class (conforming to SO 1554) 4 core 16 s...
Supplying and fixing of class A GI pipe on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV class 40 mm
Supply and fixing of Panel Board for fixing of indipendent meters for residencial purpose including cost of labour, transporatation, loading & Unloading charges etc complete as per the directions of ...
Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...
Supplying of 1x4 feet - PVC Batten with integrated LED tube 20/22 W with high quality diffuser with Life of 25000 burning hours 70 lumen maintenance with CRI 80. Power Input: 220-240V 50/60Hz & Powe...
Supplying of recess mounting non integral type LED w luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clamps, Power LEDs with CCT 6500 degree K, CRI...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
4th Floor NIT.docx
Others - NIT • 0.05 MB
Section 3 mandatory formats @ 4thFloor.docx
Tender Document • 0.02 MB
KW-4 4th floor.docx
Tender Document • 0.12 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .