Loading…
Loading…
Tender Value
₹4.6 Cr
EMD Value
₹2.3 L
Closing Date
20 Mar 2026, 5:00 pmClosed
Similar tender results from the same govt authority in the past 3 years.
MR Yognarayan sahu(DFLT)
CE,DURG
Construction of New Govt College Building I/C. Water Supply, Sanitary Fittings, Septic Tank, Rain Water Harvesting, Approach Road & Electrification Works At Bhimbhouri Block- Berla, Distt.- Bemetara (C.G.)
186525
NIT No. 1047/TC/2025-26
RESTRICTED TENDER
WORKS
15 days
CE
Required Past Technical Experience: AS PER NIT
Required Financial Turnover (in INR): AS PER NIT
Required Bid Capacity (in INR): AS PER NIT
6 documents required · 6 mandatory
Public Works Department (PWD)
WORKS
MR Yognarayan sahu(DFLT)
RESTRICTED TENDER
PERCENTAGE
A B
CE,DURG
DURG,CIRCLE
DIVISION BEMETARA
120
15
No
0
186525
20 Mar, 2026 5:00:00 PM IST
25 Mar, 2026 10:00:00 AM IST
27 Feb, 2026 6:00:00 PM IST
NIT No. 1047/TC/2025-26
Construction of New Govt College Building I/C. Water Supply, Sanitary Fittings, Septic Tank, Rain Water Harvesting, Approach Road & Electrification Works At Bhimbhouri Block- Berla, Distt.- Bemetara (C.G.)
229000.00 INR
RTGS/CHALLAN (ONLINE) Internet Banking (ONLINE)
45618000.00
2
24 Mar, 2026 5:00:00 PM IST
45618000
AS PER NIT
AS PER NIT
AS PER NIT
0.00 INR
20d 19h 13m
6 documents required · 5 mandatory · 1 optional
₹0
₹2.3 L
27 Feb 2026
27 Feb 2026
25 Mar 2026
27 Feb 2026
20 Mar 2026
27 Feb 2026
24 Mar 2026
OFFICE OF THE EXECUTIVE ENGINEER E/M DIVISION PWD DURG (C.G.)
TERMS & CONDITION
NAME OF WORK :- Construction of New Govt College Building I/C. Water Supply, Sanitary Fittings, Septic Tank, Rain Water Harvesting, Approach Road & Electrification Works At Bhimbhouri Block- Berla, Distt.- Bemetara (C.G.)
1. Electric installation shall be carried out in accordance with the General Specification for Electrical Works (Part - I Internal) & (Part - II Exlernal) 1972 of C.P.W. D. adopted by E- In-C M.P.W.D. Bhapal & also : Confider With Indian Electrical Rule 1956 as amended. Up to Date.
2. Civil contractor should Sublet the Electrical Work only those Electrical contractor who are Registered in PWD for Electrical Work as following class.
(I) "D" Class Electrical Contractor - Up to 1.00 Crore
(II) "C" Class Electrical Contractor - Up to 2.00 Crore
(III) "B" Class Electrical Contractor - Up to 10.00 Crore
(IV)"A" Class Electrical Contractor - Unlimited
3. Contractor will submit along with final bill.
(a) Completion Certificate
(b) Completion Plan drawn to a suitable seale on tracing cloth with ink. Indicating Location of main switch , D.B. Circuit fitting and their location
4. The Contractor will be fully responsible for any accident damages and losses occurred due to negligence of work. The amount of the losses and damages etc. Will be recovered from the Contractor.
5. The Contractor shall have his own tools and plants, helmet, hand gloves, first aid box and other safety measures. In good working condition for staff, no Extra payment shall be made for this arrangement and no Claims shall be paid by the department.
6. The Contractor himself shall be fully responsible for any accident casualty of the staff if occurs due to Electrical fault or any other reason during the work and no claim will be paid for such accident of causality by the department.
7. The Contractor will be fully responsible for taking all of safety measures during contract period.
(a) Electrical power supply arrangement temporarily at site will be made by contractor No payment will be made by PWD Department
(b) Earthing system should be installed in presence of A. E. (e/m)/ Sub Engineer (E&M)
8. Earth Continuity conductor of required size & material should be installed with entire run of wiring Earth nut bolt must be provided at all switch boards All metallic parts Ceiling fan tube fitting socket out let should be essentially connected to earth.
9. All Connection of ceilling fan, tube fixture, street light fixture shall be made by Core PVC/ Rubber sheathed cable of required.
10. The Civil contractor should have a Electrical Supervisor for Electrical works at site as per Norms of C.G./ M.P. Govt. who Electrical Diploma/ Degree Holder as Required as per PAC Amount.
NAME OF WORK :-PROVIDING ELECTRIFICATION WORK TO 50 SEATER BOYS HOSTEL FOR LIVELIHOOD COLLEGE AT DIST.-DURG (C.G)
LIST OF APPROVED MATERIALS FOR ELECTRIFICATION WORK
S.No. Name of Item Make Remark
1 SWITCHES 1. M.K.(Elements) 2. Hevell's (Febio) 3. Legrand (Myrious) 4.Schneider (Livia) 5. Anchor (Roma)
2 PVC Wires (Fire Ratardant) 1.5 Sqmm. / 2.5 Sqmm./4 Sqmm & 6 Sqmm. 1. RR cable 2. Polycab 3. KEI 4. Finolex
3 PVC Pipe & its accessories (a) 2 mm Thick for concealed wiring as well as for surface 1. Preciesion 2. BEC Plast 3. 9Greens 4. Polycab
4 MCB/MCCB/DB 1. Schneider 2. L&T 3. Legrand 4.Havells 5 C&S
5 Armoured/Unarmoured Cable (Power Cable HD) 1. R.R. 2. Polycab 3. KEI 4. Finolex
6 Ceiling fan 1200 mm / 1400 mm 1.Bajaj, 2.Havell's, 3.CROMPTON 4.Orient
7 Fresh air Fan/Exahust fan 300mm/380.. 1. Bajaj 2. Crompton 3. Usha 4. Havells
8 LED light (luminaries) LED Bulb & LED Street light fitting & LED flood light 1. Bajaj 2. Crompton 3. Ledvance 4. Philips 5. Halonix 6.Wipro
9 Pump 1. Kirlosker 2. Crompton 3.CRI 4.Texmo
NAME OF WORK :- Construction of New Govt College Building I/C. Water Supply, Sanitary Fittings, Septic Tank, Rain Water Harvesting, Approach Road & Electrification Works At Bhimbhouri Block- Berla, Distt.- Bemetara (C.G.)
LIST OF APPROVED MATERIALS FOR ELECTRIFICATION WORK
S.No. Name of Item Make Remark
1 Flush type Switches/Sockets/ Power Plugs 5A/15/Amps, Angle Holder/Batlen Holder and Ceiling Roses 3 Plate 1. M.K.(Elements) 2. Hevell's (Febio) 3. Legrand (Myrious) 4.Schneider (Livia) 5. Anchor (Roma)
2 PVC Wires (Fire Ratardant) 1.5 Sqmm. / 2.5 Sqmm./4 Sqmm & 6 Sqmm. 1. RR cable 2. Polycab 3. KEI 4. Finolex
3 PVC Pipe & its accessories (a) 2 mm Thick for concealed wiring as well as for surface 1. Preciesion 2. BEC Plast 3. Plaza 4. Polycab
4 MCB/MCCB/DB/Main Switches/Change over Switches 1. Schneider 2. L&T 3. HPL 4.Havells 5 C&S
5 Armoured/Unarmoured Cable (Power Cable HD) 1. R.R. 2. Polycab 3. KEI 4. Finolex 5. Gloster
6 Ceiling fan 1200 mm / 1400 mm 1.Bajaj, 2.Havell's, 3.CROMPTON 4. Usha
7 Fresh air Fan/Exahust fan 300mm/380.. 1. Bajaj 2. Crompton 3. Usha 4. Havells
8 LED light (luminaries) LED Bulb & LED Street light fitting & LED flood light 1. Bajaj 2. Crompton 3. Arya 4. Philips 5. HPL 6.Wipro
9 High Mast Pole 1. Bajaj 2. Crompton 3. Utkarsh 4. Consoul 5. Vakrangee
10 Submersible Pump 1. Kirlosker 2. Crompton 3.CRI 4.Texmo
NIT Schedule for Construction of New Govt College Building I/C. Water Supply, Sanitary Fittings, Septic Tank, Rain Water Harvesting, Approach Road & Electrification Works At Bhimbhouri Block- Berla, Distt.- Bemetara (C.G.)
PAC RS. 456.18 lacs
SERIAL No. Department SOR Year Item Code Description UOM Rate Quantity Amount
1 PWD PWD BLD 2015 1.1 Earth Work Excavation for all types and sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits. 1.1.1) In all types of soils. cum 185.000 2528.460 467765.000
2 PWD PWD BLD 2015 1.2 Surface dressing of the ground including removing vegetation and making up undulations and in-equalities not exceeding 15 cms in depth/ height including disposal of rubbish upto 1.5 m lift and lead upto 50m (at least 5m away from the dressed area). sqm 7.200 10200.000 73440.000
3 PWD PWD BLD 2015 1.6 Extra for every additional lift of 1.5 m or part thereof. 1.6.1) All Types of soil cum 26.500 892.390 23648.000
4 PWD PWD BLD 2015 1.18 Providing and filling in plinth with sand/ Crusher dust and hard moorum under floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete. cum 371.000 3219.310 1194364.000
5 PWD PWD BLD 2015 1.22 Supplying chlorpyrifos/ Lindane emulsifiable concentrate of 20% in sealed containers including delivery as specified. litre 208.000 559.960 116472.000
6 PWD PWD BLD 2015 1.25.1 Diluting chemical emulsion (chlorpyrifos/ lindane) in water as per manufacturers recommendation and injecting for pre-constructional curative cum preventive anti-termite treatment:(Five year service guarantee bond to be signed by contractor) Surface treatment by spreading emulsion under floor, over the plinth area before laying base concrete @ 5 litres / sqm sqm 27.500 1965.620 54055.000
7 PWD PWD BLD 2015 1.25.2 Treatment of inside of plinth masonry wall on using diluted chemical emulsion @ 1.5 litre per hole, including drilling 12 mm diameter holes in plinth wall below plinth protection at the interval of 300 mm and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand). metre 19.000 1050.000 19950.000
8 PWD PWD BLD 2015 1.25.3 Treatment of outer side of plinth masonry wall using diluted chemical emulsion @ 1.5 litre per hole, including drilling 12 mm diameter holes in plinth wall at the junction of floor at the interval of 300 mm and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand). metre 13.500 1050.000 14175.000
9 PWD PWD BLD 2015 2.1 Form Work Providing and fixing form work including centering, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for: 2.1.1) Foundations, footings, bases of columns plinth beam, curtain wall in any shape and size and all type of wall below plinth level. sqm 139.000 3291.710 457548.000
10 PWD PWD BLD 2015 2.1.3 Window sills, anchor blocks, string course, bends, copings, bed plates and like. sqm 184.000 41.850 7700.000
11 PWD PWD BLD 2015 2.1.5 Columns, Pillars, Piers and likes- rectangular or square in shape sqm 297.000 2488.140 738978.000
12 PWD PWD BLD 2015 2.1.7 Suspended floors, roofs, access platform, balconies (plain surfaces) and shelves (cast in situ) sqm 235.000 4322.300 1015741.000
13 PWD PWD BLD 2015 2.1.8 Beams, lintels, cantilevers & walls sqm 202.000 2326.690 469991.000
14 PWD PWD BLD 2015 2.1.13 Weather shade, chhajja, Cornices and mouldings sqm 294.000 132.680 39008.000
15 PWD PWD BLD 2015 2.1.15 Stair cases of all types excluding spiral and folded plate type, including risers and landings sqm 230.000 212.080 48778.000
16 PWD PWD BLD 2015 3.1.3 Cement Concrete (Plain and Reinforced) Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size). cum 2970.000 306.790 911166.000
17 PWD PWD BLD 2015 3.1.5 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size). cum 4073.000 4.390 17880.000
18 PWD PWD BLD 2015 3.2.1 Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work.(Note :Excess/ less cement used as per design mix is payable/ recoverable separately) 3.2.1) 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size). cum 4163.000 1619.280 6741063.000
19 PWD PWD BLD 2015 3.4 Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: Ground Floor cum 97.500 474.120 46227.000
20 PWD PWD BLD 2015 3.4 Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth First Floor cum 195.000 455.600 88842.000
21 PWD PWD BLD 2015 3.4 Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth Terrace cum 292.500 47.750 13967.000
22 PWD PWD BLD 2015 3.12.1 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire. all complete: 3.12.1) Thermo-Mechanically treated bars FE 415 kg 54.500 175742.700 9577977.000
23 PWD PWD BLD 2015 3.20 Providing and fixing aluminium strip 1.60 mm thick on expansion joints with iron screws as per design to match the colour, shade of wall treatment . sqm 1397.000 73.500 102680.000
24 PWD PWD BLD 2015 3.21.2 Providing and fixing in position impregnated fibre board confirming to IS: 1838 in expansion joints, including cost of primer, sealing compound all complete. 25mm thick sqm 768.000 73.500 56448.000
25 PWD PWD BLD 2015 7.5.4 Brick Work Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 40 in foundation and plinth in: Cement Mortar 1:6 (1 cement : 6 coarse sand) cum 3263.000 807.260 2634089.000
26 PWD PWD BLD 2015 7.6 Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: Ground Floor cum 121.000 365.960 44281.000
27 PWD PWD BLD 2015 7.6 Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: First Floor cum 242.000 359.940 87105.000
28 PWD PWD BLD 2015 7.6 Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: Terrace cum 363.000 81.360 29534.000
29 PWD PWD BLD 2015 7.11.1 Half brick thick brick masonry with fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in superstructure above plinth level upto plinth level: Cement Mortar 1:3 (1 cement : 3 coarse sand) sqm 394.000 151.990 59884.000
30 PWD PWD BLD 2015 7.12 Extra for half brick work in superstructure above plinth level for every story or part thereof in addition to rate for upto plinth level: sqm 11.000 90.760 998.000
31 PWD PWD BLD 2015 7.12 Extra for half brick work in superstructure above plinth level for every story or part thereof in addition to rate for upto plinth level:First Floor sqm 22.000 61.230 1347.000
32 PWD PWD BLD 2015 7.20 Extra for providing and placing in position hopping 25x1.60 mm or 2 Nos 6mm dia MS bars reinforcement at every third course of half brick masonry. sqm 62.500 151.990 9499.000
33 PWD PWD BLD 2015 8.12.2 WOOD AND PVC WORK Providing and fixing flush door shutters, conforming to IS : 2202 (Part-I), decorative type core of block board construction with frame of first class hard wood and well matched teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters excluding hinges. 35 mm. thick (single leaf) sqm 2005.000 160.320 321442.000
34 PWD PWD BLD 2015 8.15 Extra for double leaf shutter instead of single leaf. sqm 52.000 126.910 6599.000
35 PWD PWD BLD 2015 8.132.2 Providing and fixing stainless steel butt hinges IS : 12817 marked with necessary stainless steel screws etc complete. 125x2.5mm (heavy) each 76.500 380.000 29070.000
36 PWD PWD BLD 2015 8.137.1 Providing and fixing stainless steel sliding door bolts with 16mm rod, 2.5mm thick flap, necessary stainless steel nuts bolts and screws etc complete. 300mm each 238.000 54.000 12852.000
37 PWD PWD BLD 2015 8.138.1 Providing and fixing stainless steel door latch with 12mm rod, 2.5mm thick flap, necessary stainless steel screws etc complete. 300mm each 92.500 54.000 4995.000
39 PWD PWD BLD 2015 8.139.1 Providing and fixing stainless steel tower bolts (Barrel type) with necessary stainless steel screws etc complete. 250 x10mm each 97.000 124.000 12028.000
41 PWD PWD BLD 2015 8.141.1 Providing and fixing Stainless steel "D" shape door handles made of 10mm dia rod with necessary stainless steel screws etc complete. 8.141.1) 200 mm each 64.000 124.000 7936.000
42 PWD PWD BLD 2015 8.143.2 Providing and fixing stainless steel hanging door stopper with necessary stainless steel screws complete. Double each 65.000 54.000 3510.000
43 PWD PWD BLD 2015 8.151 Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size complete as per manufacturers specification and direction of Engineer-in-Charge. metre 346.000 69.300 23978.000
44 PWD PWD BLD 2015 8.152.1 Providing and fixing 30mm thick factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and 15x15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5mm thick heat moulded PVC 'C' channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45degree angle on either side forming styles; and 5mm thick, 95mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel. 10mm (5mm x 2 ) thick, 20mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail. paneling of 5mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7mm (5mm+2mm) thick x 15mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per Manufacturer’s specification including 3 nos ISI marked stainless steel hinges of size 100x58x1.9 mm complete. (for W.C. and bathroom door shutter). PVC door shutter sqm 2318.000 22.050 51112.000
45 PWD PWD BLD 2015 9.11 Steel Work Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rails of T-iron 40x40x6mm with 38mm steel pulleys complete with bolts, nuts, locking arrangement stoppers, handles including applying a priming coat of red oxide zinc chromate primer. sqm 3330.000 14.400 47952.000
46 PWD PWD BLD 2015 9.15 Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer. kg 67.500 6323.460 426834.000
47 PWD PWD BLD 2015 9.16.2 Providing and fixing M.S. frames of doors, windows, ventilators and cupboards joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of grade M-10 or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Angle-iron frames kg 73.50 2078.600 152777.000
48 PWD PWD BLD 2015 9.47.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions made out of extruded aluminium standard sections (main section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285 mitred and jointed mechanically including aluminium cleats, neoprene weather stripping gasket beveled edge beading, screws duly fixed in wall/ floor with fixing clips or hold fasteners or bolts and nuts as required aluminium sections shall be anodized transparent or dyed to approved shade according to IS: 1868, minimum anodic coating shall be of grade AC-15. (Glazing to be paid for separately: For fixed portion Kg 331.000 2011.350 665757.000
49 PWD PWD BLD 2015 9.47.2 Providing and fixing aluminium work for doors, windows, ventilators and partitions made out of extruded aluminium standard sections (main section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285 mitred and jointed mechanically including aluminium cleats, neoprene weather stripping gasket beveled edge beading, screws duly fixed in wall/ floor with fixing clips or hold fasteners or bolts and nuts as required aluminium sections shall be anodized transparent or dyed to approved shade according to IS: 1868, minimum anodic coating shall be of grade AC-15. (Glazing to be paid for separately: For shutter of doors, windows & ventilators including providing and making provision for fixing of fitting wherever required including the cost of PVC/ neoprene gasket required (Fittings shall be paid for separately). Kg 338.000 2114.640 714748.000
50 PWD PWD BLD 2015 9.48 Extra for powder coated (minimum 50 micron) aluminium sections instead of anodized. kg 27.000 4501.260 121534.000
51 PWD PWD BLD 2015 9.51.2 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness sqm 708.000 264.780 187464.000
52 PWD PWD BLD 2015 9.57.1 Providing stainless steel railing/ grill made of S.S. flats, hollow S.S. pipe or square/ rectangular sections of approved design fixing in stair case, balcony or other places with metal fasteners and stainless steel bolts etc complete. SS Grade 204 kg 467.000 1123.200 524534.000
53 PWD PWD BLD 2015 10.60 ROOFING AND CEILING Providing and fixing steel grid for false ceiling made from M.S. rectangular hollow tubes of 50x25x1.25mm (wall thickness) as main runners to be jointed to cross runners of same size by electric arc welding with spacing not exceeding 610x610mm in any direction. The frame to be screwed to the wall using wooden plugs and wood screws of size 50x8mm at an interval of not more than 300mm centre to centre. The grid to be supported using 6mm M.S. hanger bars at 1200mm centre to centre both ways bent, hooked, fixed to existing R.C.C. roof with fastner or to the truss as the case may be and bolted to the grid with the help of suitable M.S. holding cleats, complete. kg 101.000 418.320 42250.000
54 PWD PWD BLD 2015 10.61 Providing and fixing at all height false ceiling consisting of frame work "W" / "U" / "L" sections made of G.I. sheet with zinc coating of grade 120 consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick button wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64mm diax230mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.55mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed including providing and fixing 12.5 mm thick tapered edge gypsum board conforming to IS: 2095- Part-I all complete as per drawing and specification and direction of the Engineer in Charge but excluding the cost of painting. sqm 658.000 31.200 20530.000
55 PWD PWD BLD 2015 11.1.1 PLASTERING AND POINTING Providing and making 6mm thick cement plaster of mix: In Cement mortar 1:3 (1 cement : 3 fine sand) sqm 93.000 4528.970 421194.000
56 PWD PWD BLD 2015 11.2.4 Providing and making 12mm thick cement plaster of mix: 11.2.4) In Cement Mortar 1:6 (1 cement : 6 fine sand) sqm 91.500 6280.570 574672.000
57 PWD PWD BLD 2015 11.3.3 IProviding and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: In Cement Mortar 1:5 (1 cement : 5 fine sand) sqm 113.000 125.600 14193.000
58 PWD PWD BLD 2015 11.3.4 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: 11.3.4) In Cement Mortar 1:6 (1 cement : 6 fine sand) sqm 107.000 4043.230 432626.000
59 PWD PWD BLD 2015 11.5 Neat Cement punning. sqm 33.000 54.720 1806.000
60 PWD PWD BLD 2015 11.9 Extra for providing and mixing water proofing materials in cement plaster work in proportion as recommended by manufacturer. kg 43.500 1412.470 61442.000
61 PWD PWD BLD 2015 11.13 Extra for plastering done on mouldings, cornices or architraves including neat finish to line and level. sqm 134.000 258.720 34668.000
62 PWD PWD BLD 2015 11.41 Providing and fixing chicken mesh weighting not less than 250 gms/ sqm as per IS : specification in the required width with 40mm long steel nails on vertical and horizontal surface near R.C.C. and brick walls junctions including scaffolding and all lead and lifts etc. complete before plastering upto 10mts in height. sqm 86.000 1856.460 159656.000
63 PWD PWD BLD 2015 12.7.1 Flooring Providing and fixing ceramic glazed wall tiles conforming to IS : 15622 of approved make, colours, shades and size on wall and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with matching pigment complete. Size upto 200x300mm sqm 587.000 51.000 29937.000
64 PWD PWD BLD 2015 12.9.1 Providing and laying ceramic glazed floor tiles conforming to IS : 15622 of approved size, make, colour, shade laid on 20 mm thick Cement Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement mixed with matching pigment etc., complete. Size 300x300mm sqm 692.000 30.000 20760.000
65 PWD PWD BLD 2015 12.17 Extra for fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477 (Type 2) for interior/exterior applications, using 5kg adhesive per sqm of tile area, in 3mm-6mm thickness in place of cement mortar. sqm 202.000 163.270 32981.000
66 PWD PWD BLD 2015 12.44 Extra for nosing in Granite stone for treads. metre 126.000 486.400 61286.000
67 PWD PWD BLD 2015 12.46.2 15 mm thick Table rubbed polished Granite stone slab in risers and treads of steps skirting dado and pillars laid on 12mm (Average) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry including rubbing and polishing etc. complete (single stone is to be used for risers and treads of steps and width of stone for skirting and dado shall be equal to the height of skirting & dado and length of 1.0 m). 12.46.2 Granite stone black sqm 2719.000 123.420 335579.000
68 PWD PWD BLD 2015 12.48.2 8 mm thick Table rubbed polished Granite stone tile in risers and treads of steps skirting dado and pillars laid on 12mm (Average) thick base of cement mortar 1:3 (1 cement : 3 Granite stone black sqm 1402.000 73.600 103187.000
69 PWD PWD BLD 2015 12.49 25 mm thick KOTA stone slab flooring over 20mm (Average) thick base of cement mortar 1:4 laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding rubbing and polishing etc. complete (Area of slab to be over 0.20 sqm and upto 0.50 sqm) sqm 897.000 1027.260 921452.000
70 PWD PWD BLD 2015 12.74.1 Providing and fixing rectified glazed ceramic floor tiles of 1st quality conforming to IS:15622-2017 of approved make, in all colours, shades overs 20mm thick bed of cement Mortar 1:3 (1 cement:3 coarse sand) and jointing with grey cement slurry @ 3.3Kg per sqm including pointing in white cement mixed with matching pigment complete. Size 300x300mm thickness 7 to 8 mm sqm 779.000 100.590 78360.000
71 PWD PWD BLD 2015 12.75.2 Providing and fixing rectified glazed ceramicWall/Dado tiles of 1st quality conforming to IS:15622-2017 of approved make, in all colours, shades overs 12mm thick bed of cement Mortar 1:3 (1 cement:3 coarse sand) and jointing with grey cement slurry @ 3.3Kg per sqm including pointing in white cement mixed with matching pigment complete. Size 300x600mm thickness 7 to 8 mm sqm 850.000 256.050 217643.000
72 PWD PWD BLD 2015 12.79.1 Providing and laying DOUBLE/MULTI CHARGE (minimum 2.0mm thick layer) VITRIFIED floor tiles with water absortion less than 0.05% and conforming to IS:15622-2017 of 1st quality of approved make in all colours, shades and size mentioned below (+/- 10mm) laid on 20mm thick cement mortal 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Size 600x600mm thickness 9 to 10 mm sqm 1082.000 2883.210 3119633.000
73 PWD PWD BLD 2015 13.6.2 Marble Work (Wall Lining) 15mm thick Granite work (machine cut, table rubbed & mirror polished) for kitchen platform, vanity counters, window sills and similar locations of required size laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) including joints treated with white cement mixed with matching pigment including rubbing and polishing to edge moulding to give high gloss finish. 13.6.2 Granite stone black sqm 3279.000 247.100 810241.000
74 PWD PWD BLD 2015 13.19.2 Extra for providing edge moulding to 15mm thick stone counters, vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work metre 172.000 847.600 145787.000
75 PWD PWD BLD 2015 14.57 Providing and applying 2mm thick white cement based polumeric Exterior grade Putty with minimum 3 coats applied @ 5.4K.g. /10 sqm as per relevant IS Code 17545: 2021 (Product such as Asian Trucare, Berger Happy Walls Putty, Birla Opus one pro smooth ) to make the surface smooth and even with all tools tackles and labour etc. complete for the work. ( This Item to be use in heigher grade painting works Item No.-14.65) Sqm 95.000 14852.750 1411011.000
76 PWD PWD BLD 2015 14.60 Providing and applying of Acylic primer on all surface applied @ 0.80 litrs/10 sqm as per relevant I.S. code 15489:1974 (Product suac as Asian Spark/ Suprimo, J.K. Primer, Dulux Acylic Primer) with all tools tackles and labour etc. complete for the work. Sqm 37.000 5958.480 220464.000
77 PWD PWD BLD 2015 14.62 Providing and applying Acrylic wasable Distemper of lite econocmy plastic emulsion paint having VOC centent less than 50gms/ lit Minimum two coats up to final finish applied @ 1.25 kg/ 10 sqm as per relevant IS Code 428.2000 (product such as Tractor Unol, Dulux Duval, Berger Bison, Opus Style/ lite economy emulsion product such as Asian Tractor Spark, Dulux Promise sheen, Neroloc Litil master, Bergers Bison Lite, Nippon superio.) inclusive of providing abro tape on edges and article and cleraing of door, windows, floor and surface as required with all tools tackles and labour complete for the work. sqm 64.000 10808.940 691772.000
78 PWD PWD BLD 2015 14.67 Providing and applying on exterior surface with Economy Exterior Emulsion paint of required shades to give protective and water proof finish minimum three coats applied @ 1.43 lit/10 sqm up to final finish as per relevant IS code 15489:2013 Type-2 class D, C ( Glossy / Semi Glossy finish) (Product such as Asian ACE Dulux Promise Exterior, Berger Wall Masta, Nerolac Suraksha Plus, Nippon Shogun Opus, One Style Power Bright) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour etc. complete for the work ( With 2 year Warranty. ) sqm 70.000 4043.230 283026.000
79 PWD PWD BLD 2015 14.71 Providing and applying satin/matt finish Enamel paint minimum 2 coats in all surface applying @0.75 lit/10 Sqm up to required finish as per relevant I.S. code 2932:2013 of (Product such as Asian satin Enamel, Dulux Promise premium Enamel, Nerolac Synthetic Enamel, Opus Prime enamel ) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackle and labour etc. complete for the work. sqm 133.000 625.380 83176.000
80 PWD PWD BLD 2015 18.1.1 Sanitary Installations Providing and fixing water closet squatting pan (Indian type W.C. pan ), 100mm sand cast Iron P or S trap, 10 litre low level P.V.C. flushing cistern (same colour) conforming to IS : 7231, with flush bend and other fittings and fixtures complete including cutting and making good the walls and floors wherever required : White Long pattern W.C. pan of size 580 mm each 2459.000 8.000 19672.000
81 PWD PWD BLD 2015 18.4.1 Providing and fixing vitreous china water closet (European type W.C. pan) with white ISI marked plastic seat and lid, 10 litre low level white P.V.C. flushing cistern (same colour), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : White pedestal type each 2882.000 4.000 11528.000
82 PWD PWD BLD 2015 18.9.1 Providing and fixing ISI marked plastic seat with lid for pedestal type W.C. pan complete: White/ black each 620.000 4.000 2480.000
83 PWD PWD BLD 2015 18.10.2 Providing and fixing 15 mm nominal bore uplasticised PVC connection pipe with PTMT nuts and PVC bush of approved quality and colour: 45 CM length each 66.500 65.000 4323.000
84 PWD PWD BLD 2015 18.13.1 Providing and fixing white vitreous china urinal basin with waste fitting as per IS : 2556, and other couplings in C.P. brass complete: Flat back half stall urinal of size 460x380x250mm each 1776.000 20.000 35520.000
85 PWD PWD BLD 2015 18.15 Providing and fixing one piece construction white vitreous china squatting plate urinal with an integral rim longitudinal flushing pipe, standard size G.I. flush pipe for back and front flush, C.P. brass coupling complete including cutting and making good the walls and floors etc. wherever required : each 2014.000 8.000 16112.000
86 PWD PWD BLD 2015 18.17.1 Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required : White Size 550x450 mm each 1430.000 12.000 17160.000
87 PWD PWD BLD 2015 18.21.2 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink with drain board as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required : 1040x510 mm bowl size 460x410x200 mm each 8539.000 6.000 51234.000
88 PWD PWD BLD 2015 18.25.2 Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40 mm dia each 88.500 6.000 531.000
89 PWD PWD BLD 2015 18.29 Providing and fixing 600x450 mm beveled edge 4mm mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. each 599.000 11.000 6589.000
90 PWD PWD BLD 2015 18.76 Providing and fixing on wall face or under floor UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including required couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc complete. 18.76.1) 75 mm dia pipe. metre 182.000 218.000 39676.000
91 PWD PWD BLD 2015 18.76.2 Providing and fixing on wall face or under floor UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including required couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc complete. 110 mm dia pipe. metre 267.000 585.000 156195.000
92 PWD PWD BLD 2015 18.77.1.1 Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 18.77.1) Tee/ Tee with door/ Bend 45°/ Bend 90° 75mm each 113.000 120.000 13560.000
93 PWD PWD BLD 2015 18.77.1.2 Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 18.77.1) Tee/ Tee with door/ Bend 45°/ Bend 90° 110 mm each 154.000 191.000 29414.000
94 PWD PWD BLD 2015 18.77.2.3 Double Y with or without door 110 mm each 224.000 38.000 8512.000
95 PWD PWD BLD 2015 18.77.3.2 Vent covel 110mm each 44.000 12.000 528.000
96 PWD PWD BLD 2015 18.77.5 P trap 110mmx110mm long each 227.000 9.000 2043.000
97 PWD PWD BLD 2015 18.77.6 Nahani trap 110x75mm each 90.500 80.000 7240.000
98 PWD PWD BLD 2015 18.78.2 Providing and fixing UV stabilized Unplasticised -PVC pipe clips of approved design to Rigid PVC pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm each 61.000 120.000 7320.000
99 PWD PWD BLD 2015 19.4.1 Water Supply Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. INTERNAL WORK - EXPOSED ON WALL 15 mm nominal outer dia .Pipes. metre 110.000 200.000 22000.000
100 PWD PWD BLD 2015 19.4.3 25 mm nominal outer dia .Pipes. metre 199.000 340.000 67660.000
101 PWD PWD BLD 2015 19.4.4 32 mm nominal outer dia .Pipes. metre 271.000 140.000 37940.000
102 PWD PWD BLD 2015 19.4.6 50 mm nominal outer dia .Pipes. metre 560.000 120.000 67200.000
103 PWD PWD BLD 2015 19.14.1 Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required: Bib cock (400 grams) each 382.000 78.000 29796.000
104 PWD PWD BLD 2015 19.14.3 Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required: Long body bib cock (500 grams) each 426.000 8.000 3408.000
105 PWD PWD BLD 2015 19.14.5 Two way bib cock (800 grams) each 708.000 6.000 4248.000
106 PWD PWD BLD 2015 19.14.6 Stop cock (concealed) (600 grams) each 494.000 182.000 89908.000
107 PWD PWD BLD 2015 19.14.7 Angle valve for basin mixer and geyser points (450 grams) each 382.000 5.000 1910.000
108 PWD PWD BLD 2015 19.14.14 Soap dish plate each 163.000 18.000 2934.000
109 PWD PWD BLD 2015 19.14.15 Shower rose (revolving type) (150mm) each 269.000 4.000 1076.000
110 PWD PWD BLD 2015 19.14.16 Towel rail (600mm long x 20mm dia) each 338.000 40.000 13520.000
111 PWD PWD BLD 2015 19.14.20 CP brass water jet to be fixed in seat cover of WC with flexible connection pipe set 577.000 8.000 4616.000
112 PWD PWD BLD 2015 19.15 Providing and fixing stainless steel drain jali of approved make/quality. each 51.000 100.000 5100.000
113 PWD PWD BLD 2015 19.18.1 Providing and fixing gun metal non- return valve (horizontal type) of approved quality (screwed end) : 25 mm nominal bore each 413.000 22.000 9086.000
114 PWD PWD BLD 2015 19.18.2 32 mm nominal bore each 556.000 8.000 4448.000
115 PWD PWD BLD 2015 19.18.4 50 mm nominal bore each 993.000 9.000 8937.000
116 PWD PWD BLD 2015 19.42 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank litre 7.30 15000.000 109500.000
117 PWD PWD BLD 2015 19.47 Constructing masonry Chamber 30x30x50 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 fine sand:10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design : each 754.000 16.000 12064.000
118 PWD PWD BLD 2015 19.48 Constructing masonry Chamber 60x60x75 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : each 4644.000 10.000 46440.000
119 PWD PWD BLD 2015 20.1.2 Providing, laying and jointing glazed stoneware pipes grade A with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 150 mm diameter metre 262.000 110.000 28820.000
120 PWD PWD BLD 2015 20.1.3 200 mm diameter metre 506.000 60.000 30360.000
121 PWD PWD BLD 2015 20.2.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete 150mm thick as per standard design: 150 mm diameter S.W. pipe metre 436.000 110.000 47960.000
122 PWD PWD BLD 2015 20.2.3 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete 150mm thick as per standard design: 200 mm diameter S.W. pipe metre 508.000 60.000 30480.000
123 PWD PWD BLD 2015 20.3.1 Providing and fixing square-mouth S.W. gully trap grade 'A'’ complete with C.I. grating brick masonry chamber with well burnt modular clay bricks crushing strength not less than 35kg/cm2, water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : 100x100 mm size P type each 1339.000 26.000 34814.000
124 PWD PWD BLD 2015 20.6.3 Providing, lowering, laying, aligning, fixing in position at and jointing at all level/ depths ISI marked HDPE pipes of PE-100 grade and PN 6 for sewer application as per IS 14333-1996 (amended upto date) in trenches in complete including all material, labour, testing and commissioning as per direction of Engineer. Note : E/w to be measured and paid separately. 200 mm dia metre 1165.000 160.000 186400.000
125 PWD PWD BLD 2015 20.7.1 Constructing brick masonry manhole with well burnt modular clay bricks crushing strength not less than 35kg/cm2 in cement mortar 1:4 ( 1 cement : 4 coarse sand), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation in cement concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : each 6703.000 18.000 120654.000
126 PWD PWD BLD 2015 20.31 Providing and constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design. each 1709.000 8.000 13672.000
127 PWD PWD BLD 2015 21.1.1.3 RAIN WATER HARVESTING & TUBEWELLS Boring/drilling bore well perfectly vertical for the specified depth suitable to receive required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer–in-charge upto 90 metre depth below ground level. All types of soil 150 mm dia. metre 339.000 90.000 30510.000
128 PWD PWD BLD 2015 21.2.1.4 Boring/drilling bore well perfectly vertical for the specified depth suitable to receive required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer–in-charge beyond 90 metre & upto 150 metre depth below ground level. All types of soil 150 mm dia. metre 371.000 30.000 11130.000
129 PWD PWD BLD 2015 21.2.2.3 Boring/drilling bore well perfectly vertical for the specified depth suitable to receive required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer–in-charge beyond 90 metre & upto 150 metre depth below ground level. Rocky strata including Boulders. 150 mm dia. metre 424.000 30.000 12720.000
130 PWD PWD BLD 2015 21.3.3 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer –in-charge. 150 mm nominal size dia. metre 540.000 30.000 16200.000
131 PWD PWD BLD 2015 21.6.3 Supplying, assembling, lowering and fixing in vertical position in bore well, slotted casing pipe made from ISI marked G.I. pipe (Plain) medium class in 4 to 7 meters length one end fitted with socket as per IS: 1239 (Part-1&Part-2) 1992 with IVth revision (having slot of size 1.6/3.2 mm), of reputed and approved make, including hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-in-charge. 150 mm nominal dia metre 1317.000 80.000 105360.000
132 PWD PWD BLD 2015 21..9 Gravel packing in tube well construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge. cum 1048.000 2.400 2515.000
133 PWD PWD BLD 2015 21.11.3 Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for bore well of: 150 mm dia each 217.000 1.000 217.000
134 PWD PWD BLD 2015 21.12.3 Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tube well as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 150 mm clamp. each 1055.000 4.000 4220.000
135 PWD PWD BLD 2015 21.13.3 Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tube well as per IS:2800 (part I). 150 mm dia each 171.000 1.000 171.000
136 PWD PWD BLD 2015 21.16 Providing ISI Mark 32 mm dia G.I. ( B class) riser pipe and M.S. plunger rod in 3 meter length socketed on one end as per IS: 1239 ( Part I) 1990 with up to date amendments and socket as per IS: 2062/1990 up to date amendments. metre 275.00 118.000 32450.000
137 PWD PWD BLD 2015 21.17 Carrying out the resistivity survey by VES method using Schlumberger configuration for locating the proper spot for drilling of tube well within the selected habitation, including photography, interpretation of resistivity data and submission of report in the desired format along with resistivity readings, necessary graph and photographs. (only successful point is payable) point 1502.000 1.000 1502.000
138 PWD PWD BLD 2015 21.18 Providing and fixing filter of minimum 100 litre capacity for roof top rain water harvesting through tube well consisting of two layered HDPE tank with five layers (each layers of minimum 100 mm) consist of coarse sand, 4mm, 6mm, 8mm & 12 mm gravels with stainless steel wire mesh fixed between each layer with suitable length and sufficient numbers of 110 mm dia PVC pipe pieces in the bottom of tank to support the above layer including fixing of inlet and out let P.V.C. pipe of required diameter upto 2 metre length on each side, Cement Concrete plateform of required size complete as directed by Engineer in charge. (excluding cost of tubewell and inlet and outlet pipe beyond 2 metre) litre 18.500 6000.000 111000.000
139 PWD PWD BLD 2015 21.19 Providing and fixing 80-100 mm dia PVC ball valve for inlet/ outlet of rain water harvesting pipe and filter. each 644.000 12.000 7728.000
140 PWD PWD ROAD 2015 2.3 (A) Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 meters including removal and disposal of top organic soil not exceeding 150 mm in thickness if required and as per relevant clauses of section-200. In area of light jungle Hectare 40680 0.200 8136.000
141 PWD PWD ROAD 2015 3.12 Construction of embankment with Material Obtained from Borrow Pits/Borrow Area (Construction of embankment with approved material/selected soil having C.B.R.>5 (unless specified otherwise in the contract) obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2) cum 223.00 1040.000 231920.000
142 PWD PWD ROAD 2015 4.1 A (b)(i) Granular Sub-base as per Table:- 400-1 Construction of granular sub-base by providing graded Material, ,carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface watering, rolling and compacting with vibratory power roller at OMC to achieve the desired density, complete as per clause 401 Plant mix method (with Mechanically crushed stone only) For Sub-base cum drainage layer or upper sub-base with Grading-V Material cum 1372.00 121.500 166698.000
143 PWD PWD ROAD 2015 9.1 Excavation for Structures (Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.) Ordinary Soil Upto 3M Depth cum 146.00 28.739 4196.000
144 PWD PWD ROAD 2015 9.5 (D) Providing and laying Reinforced Cement Concrete pipe NP 3 / prestressed concrete pipe. (Laying Reinforced cement concrete pipe NP3 /prestressed concrete pipe for culverts including fixing collar with cement mortar 1:2 but excluding bedding below pipes, excavation, protection works, backfilling, concrete and masonry works in head walls and parapets . ) 1000 mm dia meter 5370.00 10.000 53700.000
145 PWD PWD ROAD 2015 9.6 Providing 1st class bedding below pipes with graded sand or other granular materials passing through 5.6 mm sieve as per clause 2904. cum 759.00 3.662 2779.000
146 PWD PWD ROAD 2015 9.9 Plain cement concrete complete as per drawing and Technical Specifications PCC Grade M 15 cum 3768.00 34.104 128504.000
147 PWD ELECT 2020 1.7 Wiring for light/ fan/ exhaust fan / call bell point with 3x1.5 sqmm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) with 5/6 amp modular switch, modular base and cover plate, suitable size G.I. box as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) 1.7.1 Short Point Point 266.00 95 25270.00
148 PWD ELECT 2020 1.7.2 Medium Point Point 424.00 129 54696.00
149 PWD ELECT 2020 1.7.3 Long Point Point 588.00 676 397488.00
150 PWD ELECT 2020 1.8 Wiring for twin control light point with 3x1.5 sqmm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) with 5/6 amp modular switch, modular base and cover plate, suitable size G.I. box as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) Point 420.00 26 10920.00
151 PWD ELECT 2020 1.9 Extra for providing and fixing light plug point on board in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) point wiring with modular type 3 pin 5/6 amp socket outlet and 5/6 amp switch including cost of base and cover plate and G. I. box etc. as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) Point 216.00 153 33048.00
152 PWD ELECT 2020 1.10 Wiring for light plug point with 3x2.5 sq mm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with modular type 6 Amp switch and 3 pin 6 amps socket outlet with modular base and cover plate, suitable size G.I. box, earthing the switch box and socket outlet with same size wire etc. as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) 1.10.3 Long Point Point 922.00 5 4610.00
153 PWD ELECT 2020 1.10.4 Extra Long Point I Point 1302.00 6 7812.00
154 PWD ELECT 2020 1.10.5 Extra Long Point II Point 1657.00 9 14913.00
155 PWD ELECT 2020 1.10.6 Extra Long Point III Point 1995.00 7 13965.00
156 PWD ELECT 2020 1.11 Wiring for power plug point with 3x4 sq mm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with modular type 16 Amp switch and 6 pin 16 amps socket outlet with modular base and cover plate, suitable size G.I. box, earthing the switch box and socket outlet with same size wire etc. as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) 1.11.3 Long Point Point 1350.00 5 6750.00
157 PWD ELECT 2020 1.11.4 Extra Long Point I Point 1807.00 4 7228.00
158 PWD ELECT 2020 1.11.5 Extra Long Point II Point 2315.00 5 11575.00
159 PWD ELECT 2020 1.11.6 Extra Long Point III Point 2825.00 6 16950.00
160 PWD ELECT 2020 1.12 Wiring for power plug point with 3x6 sq mm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with modular type 32 Amp SPMCB "C" curve and 6 pin 20 amps socket outlet with modular base and cover plate, suitable size G.I. box, earthing the switch box and socket outlet with same size wire etc. as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) 1.12.4 Extra Long Point I Point 2326.00 3 6978.00
161 PWD ELECT 2020 1.12.5 Extra Long Point II Point 3016.00 4 12064.00
162 PWD ELECT 2020 1.12.6 Extra Long Point III Point 3708.00 5 18540.00
163 PWD ELECT 2020 1.13 Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, wire in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) 1.13.1 3 X 1.5 sq. mm in 20mm conduit Metre 92.00 845 77740.00
164 PWD ELECT 2020 1.13.2 3 X 2.5 sq. mm in 20mm conduit Metre 111.00 1567 173937.00
165 PWD ELECT 2020 1.13.3 6 X 2.5 sq. mm in 25mm conduit Metre 172.00 734 126248.00
166 PWD ELECT 2020 1.13.4 9 X 2.5 sq. mm in 32mm conduit Metre 238.00 540 128520.00
167 PWD ELECT 2020 1.13.5 12 X 2.5 sq. mm in 32mm conduit Metre 288.00 350 100800.00
168 PWD ELECT 2020 1.13.6 3 X 4 sq. mm in 25mm conduit Metre 145.00 490 71050.00
169 PWD ELECT 2020 1.13.8 3 X 10 sq. mm in 25mm conduit Metre 270.00 20 5400.00
170 PWD ELECT 2020 1.13.9 3 X 16 sq. mm in 32mm conduit Metre 397.00 10 3970.00
171 PWD ELECT 2020 1.13.12 6 X 4 sq. mm in 32mm conduit Metre 236.00 10 2360.00
172 PWD ELECT 2020 1.13.15 6 X 16 sq. mm in 50mm conduit Metre 772.00 12 9264.00
173 PWD ELECT 2020 1.15 Supplying and fixing of following sizes FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with accessories in concealed complete as per specification and IS: 9537 (2000 Part 5) 1.15.1 20 mm Metre 42.00 456 19152.00
176 PWD ELECT 2020 5.4 Supplying and fixing following modular switch, socket, other accessories on the existing modular plate & switch box including connections but excluding modular plate etc. as per specification. 5.4.9 Fan regulator (two module size) electronic stepped type moving all rounds Each 223.00 259 57757.00
177 PWD ELECT 2020 5.4.15 Telephone socket outlet Each 70.00 2 140.00
178 PWD ELECT 2020 5.4.16 T.V. antenna socket outlet Each 74.00 2 148.00
179 PWD ELECT 2020 5.4.18 25/32 amp A.C. Starter switch Each 246.00 12 2952.00
180 PWD ELECT 2020 5.4.20 Ceiling rose 3 pin 5 amp Each 40.00 776 31040.00
181 PWD ELECT 2020 5.4.22 Batten/ angle holder Each 41.00 150 6150.00
182 PWD ELECT 2020 5.4.23 Blanking plate Each 28.00 225 6300.00
183 PWD ELECT 2020 5.6 Providing and fixing composite unit for computer points having modular type 1 No 6 pin 16 amp socket outlet, 1 No 16 amp switch, 3 Nos 3 pin 6 amp socket outlets, 3 Nos 6 amp switches, suitable G.I. box, base and cover plates, earthing the sockets and switch box including etc. as per specification. Each 816.00 51 41616.00
184 PWD ELECT 2020 5.7 Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts A.C. supply, complete as per specification. 5.7.2 Deluxe Each 107.00 14 1498.00
185 PWD ELECT 2020 5.9 Providing and fixing round/ hexagonal fan box (125mm dia) depth 75mm (max.) with 12mm dia steel bar hook, 1.6mm thick MS sheet cover, in RCC slab etc. as per specification. Each 42.00 131 5502.00
186 PWD ELECT 2020 5.10 Providing and fixing fan hook made of 12mm dia steel bar in existing ceiling slab including cutting of roof, fixing hook above reinforcement on both side, repairing with cement mortar 1:2 (1 cement : 2 sand) etc. as per specification. Each 109.00 128 13952.00
187 PWD ELECT 2020 6.1 Supplying, installation, testing and commissioning of following sizes ceiling fan including wiring the down rods of standard length up to 30 cm with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, earthing etc. complete as required. P.F. should be greater than 0.9, with BEE Star rating from 3 star and above, IS: 374:2019 including all amendments. 6.1.3 1200 mm sweep Each 1697.00 239 405583.00
188 PWD ELECT 2020 6.1.4 1400 mm sweep Each 1773.00 20 35460.00
189 PWD ELECT 2020 6.5 Supplying and fixing of wall/ cabin fan including connection etc. as per specification. P.F. should be greater than 0.9 6.5.2 400 mm sweep Each 2043.00 6 12258.00
190 PWD ELECT 2020 6.6 Supplying, installation, testing and commissioning of following sizes heavy duty (continuous running) 1400 rpm exhaust fan in existing opening in wall including earthing etc. complete as per specification. P.F. should be greater than 0.9 6.6.1 300 mm sweep Each 2446.00 4 9784.00
191 PWD ELECT 2020 6.6.2 380 mm sweep Each 2858.00 4 11432.00
192 PWD ELECT 2020 6.8 Supplying, installation, testing and commissioning of following sizes fancy exhaust fan having built in louvers in existing opening in wall including earthing etc. complete as per specification. P.F. should be greater than 0.9 6.8.2 300 mm sweep Each 1270.00 6 7620.00
193 PWD ELECT 2020 6.11 Supplying and fixing following sizes of down rod of 15/20mm dia M.S. pipe of thickness 2 mm to ceiling fan including painting with matching colour etc. as per specification. 6.11.2 60 cm long Each 40.00 128 5120.00
194 PWD ELECT 2020 6.11.3 90 cm long Each 58.00 131 7598.00
195 PWD ELECT 2020 6.12 Providing and fixing phenolic laminated sheet cover of 180 mm dia 3 mm thick on the fan box etc. as per specification. (If provided at the time of installation of ceiling fan) Each 56.00 131 7336.00
196 PWD ELECT 2020 6.15 Supplying, installation, testing and commissioning of following LED fitting (luminaries) Panel Light in round/ square shape complete with electronic driver heat sink capacitor and all other accessories on surface/ in false ceiling etc. as per specification and P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 100 lumens /watt. 6.15.3 9 Watt Each 528.00 8 4224.00
199 PWD ELECT 2020 6.16 Supplying, installation, testing and commissioning of following sleek LED panel down lighters (luminaries) in round/ square shape complete with electronic driver heat sink capacitor and all other accessories on surface/ in false ceiling etc. as per specification and P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 100 lumens /watt. 6.16.1 24 watt, size 300 x 300mm Each 1775.00 259 459725.00
200 PWD ELECT 2020 6.17 Supplying, fixing, testing and commissioning of following LED lamps with inbuilt electronic driver heat sink and all other accessories in existing holder/ luminaries as per specification and P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 100 lumens /watt. 6.17.5 12 Watt Each 215.00 10 2150.00
202 PWD ELECT 2020 6.28 Supplying, installation, testing and commissioning of following 230/250 volts LED street light fitting with all accessories like driver, heat sink made of die cast aluminium with IP 66 protection and 15 KV surge protection on pole bracket, including connection, earthing, Separate housing for driver etc complete as per specification and P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 120 lumens /watt. 6.28.4 30 watt Each 1891.00 19 35929.00
205 PWD ELECT 2020 6.48 Numbering of ceiling fan/ exhaust fan/ fluorescent fittings as per specification. Each 10.00 273 2730.00
206 PWD ELECT 2020 6.50 Providing and fixing wooden board of suitable size (18''x 24'') for energy meter etc complete as per specification. Each 123.00 1 123.00
207 PWD ELECT 2020 7.6 Supplying and fixing metal clad busbar chamber made of 2.0 mm thick CRCA MS powder coated sheet with 4 strip aluminium alloy or wrought aluminium busbars of following capacity and length, complete with all accessories, including earthing the body etc. as per specification. 7.6.5 200 amps x 450mm long Each 2189.00 1 2189.00
208 PWD ELECT 2020 7.6.13 400 amps x 900mm long Each 4732.00 1 4732.00
209 PWD ELECT 2020 7.10 Providing and fixing metal clad, TP&N switch fuse unit (re-wirable), 415/500 volts, with porcelain re-wireble fuses including drilling holes on the board, connections, earthing the body etc. as per specification. (Thimbeling shall be paid separately). 7.10.1 32 amps Each 926.00 3 2778.00
212 PWD ELECT 2020 7.11 Providing and fixing porcelain re-wireble fuse carrier and base unit on wooden board including drilling holes on the board, screws, connections etc. as per specification. (Thimbeling shall be paid separately). 7.11.3 63 amps Each 162.00 9 1458.00
214 PWD ELECT 2020 7.12 Providing and fixing metal clad, TP&N double break fuse switch unit (HRC), 415/500 volts, with H.R.C. fuses including drilling holes on the board, connections, earthing the body etc. as per specification. (Thimbeling shall be paid separately). 7.12.5 400 amps Each 13453.00 1 13453.00
215 PWD ELECT 2020 7.16 Providing and making interconnection in cubical panel between BBC and switchgears with following size aluminium strip of length upto 50cm as per specification (To be measured separately for each phase/ neutral). 7.16.1 20x5mm (100 amps) Each 78.00 9 702.00
216 PWD ELECT 2020 7.17 Providing and making interconnection in cubical panel between BBC and switchgears with following size FRLS PVC insulated copper conductor wire lead of length upto 50cm including providing copper thimbles on both ends as per specification (To be measured separately for each phase/ neutral). 7.17.1 10 sqmm (32 amp) Each 76.00 12 912.00
218 PWD ELECT 2020 7.17.3 35 sqmm (125 amps) Each 181.00 6 1086.00
219 PWD ELECT 2020 7.18 Providing and making interconnection in cubical panel between BBC and switchgears with following size copper strip of length upto 50cm as per specification (To be measured separately for each phase/ neutral). 7.18.1 20x3mm (100 amps) Each 173.00 8 1384.00
222 PWD ELECT 2020 7.19 Fabrication, supply, installation, testing and commissioning of cubicle type compartmentalized wall/ floor mounted power cum control panel board of specified size and following depth made out of not less than 2 mm thick CRCA MS powder coated sheet with suitable size compartments for bus bars, switchgears and necessary cutouts for voltmeters, ammeters etc as per specifications including powder coating painting but without busbars, switchgears and other accessories etc complete as per specification. 7.19.1 Upto 300 mm deep sqm 6818.00 1.5 10227.00
223 PWD ELECT 2020 7.19.2 Above 300 mm and upto 450 mm deep sqm 7525.00 8.25 62081.25
224 PWD ELECT 2020 7.21 Supply, installation, testing and commissioning of 4 pole (3 phase + neutral) copper (electric grade) bus bars in existing cubicle type compartmentalized wall/ floor mounted panel board along with suitable size and shape insulators, necessary bolts and nuts etc complete as per specification. 7.21.2 200 amp (25x5mm) Metre 2382.00 6 14292.00
226 PWD ELECT 2020 9.1 Providing and fixing following rating and breaking capacity MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as per specification, IS/ IEC: 60947-2 and Ics = 100 % Icu. 9.1.1 3 pole MCCB, 25-63A, Fixed Thermal Release, 10KA Each 1483.00 18 26694.00
227 PWD ELECT 2020 9.1.4 3 pole MCCB, 100A, Adjustable Thermal - Magnetic Release, 25KA Each 3734.00 2 7468.00
228 PWD ELECT 2020 9.1.9 3 pole MCCB, 200A, Adjustable Thermal - Magnetic Release, 35KA Each 12006.00 2 24012.00
229 PWD ELECT 2020 9.1.15 3 pole MCCB, 400A, Adjustable Thermal - Magnetic Release, 50KA Each 16623.00 1 16623.00
230 PWD ELECT 2020 9.4 Supplying and fixing on surface/ recess horizontal type following way, 415 volts, TPN MCB distribution board of sheet steel phosphatized and powder painted, complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, including interconnections, earthing etc. as per specification. (But without MCB/RCCB/Isolator) 9.4.4 4 way Double door Each 1716.00 2 3432.00
231 PWD ELECT 2020 9.4.5 6 way Double door Each 2038.00 4 8152.00
232 PWD ELECT 2020 9.4.6 8 way Double door Each 2547.00 8 20376.00
233 PWD ELECT 2020 9.10 Supplying and fixing SP MCB, 240 volts, 'B' curve, suitable for lighting and other loads in the existing MCB DB complete with connections, testing and commissioning etc. as per specification. 9.10.1 6 amps to 32 amps Each 151.00 25 3775.00
234 PWD ELECT 2020 9.11 Supplying and fixing SP MCB, 240 volts, 'C' curve, suitable for inductive load in the existing MCB DB complete with connections, testing and commissioning etc. as per specification. 9.11.2 6 amps to 32 amps Each 148.00 278 41144.00
236 PWD ELECT 2020 9.14 Supplying and fixing TP MCB, 440 volts, 'C' curve, suitable for lighting and other loads in the existing MCB DB complete with connections, testing and commissioning etc. as per specification. 9.14.3 40 amps Each 994.00 1 994.00
238 PWD ELECT 2020 9.21 Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as per specification. 9.21.2 40 amps Each 1776.00 6 10656.00
240 PWD ELECT 2020 10.15 Providing and fixing following rating current transformer in existing cubical panel including, connections, testing and commissioning etc. as per specification. 10.15.3 200/5 amps Each 347.00 3 1041.00
242 PWD ELECT 2020 10.17 Providing and fixing penal mounting 230 volt LED type indicating lamp in existing cubical panel including, connections, testing and commissioning etc. as per specification. Each 94.00 18 1692.00
243 PWD ELECT 2020 10.18 Providing and fixing penal mounting following rating analog type ammeter of size 100x100 (NS) in existing cubical panel including, connections, testing and commissioning etc. as per specification. 10.18.4 0-500 amps Each 458.00 2 916.00
244 PWD ELECT 2020 10.20 Providing and fixing penal mounting 0-500 volt voltmeter of size 100x100 (NS) in existing cubical panel including, connections, testing and commissioning etc. as per specification. 10.20.2 Digital type Each 835.00 2 1670.00
245 PWD ELECT 2020 10.21 Providing and fixing penal mounting selector switch in existing cubical panel including, connections, testing and commissioning etc. as per specification. 10.21.1 For voltmeter Each 189.00 2 378.00
246 PWD ELECT 2020 10.21.2 For ammeter Each 207.00 2 414.00
247 PWD ELECT 2020 10.22 Providing and fixing following Time switch (timer) in existing panel including connection, testing and commissioning as per specification. 10.22.2 Analoge type Each 2525.00 3 7575.00
248 PWD ELECT 2020 12.1 Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as per specification and IS Code 3043: 1987(R 2016) Set 3243.00 20 64860.00
249 PWD ELECT 2020 12.3 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe, with charcoal and salt as per specification and IS Code 3043: 1987(R 2016) Set 6209.00 4 24836.00
250 PWD ELECT 2020 12.4 Supplying and laying 8 SWG copper wire at 0.50 metre below ground level for conductor earth electrode, including soldering etc. as per specification. Metre 77.00 60 4620.00
251 PWD ELECT 2020 12.6 Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode at 0.5 Metre depth below ground level including excavation and refilling the trench etc. as per specification. Metre 752.00 60 45120.00
252 PWD ELECT 2020 12.12 Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including soldering, excavation and refilling the trench etc. as per specification. Metre 36.00 220 7920.00
253 PWD ELECT 2020 12.19 Providing maintenance free earthing with following size GI pipe including making bore pit of minimum 150mm dia, providing and laying approved make Earthing Electrode of Pipe-in-Pipe technology as per IS 3043(R 2016) -1987 made of corrosion free G.I. Pipes having outer pipe of 80mm dia and inner pipe of 50mm dia and filling with specified qty highly conductive compound around pipe and above that with soft soil in bore pit complete and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. as per specification: 12.19.2 With 2 metre long GI Pipes and 25 kg back filling compound. Each 8222.00 3 24666.00
254 PWD ELECT 2020 12.12 Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including soldering, excavation and refilling the trench etc. as per specification. Metre 36.00 1080 38880.00
255 PWD ELECT 2020 14.2 Supplying and laying HDPE pipe of 4kg/Sqcm in ground below road, path etc at a depth not less than 40 cm and upto 90 cm including excavation, dismantling of road if required and refilling the trench with excavated material, ramming and making the surface good etc. as per specification. 14.2.1 63 mm outer dia Metre 124.00 300 37200.00
256 PWD ELECT 2020 14.2.2 75 mm outer dia Metre 174.00 50 8700.00
257 PWD ELECT 2020 14.2.4 110 mm outer dia Metre 355.00 60 21300.00
258 PWD ELECT 2020 14.2.5 140 mm outer dia Metre 499.00 50 24950.00
259 PWD ELECT 2020 14.2.7 180 mm outer dia Metre 787.00 90 70830.00
260 PWD ELECT 2020 14.3 Supplying and laying following size medium class G.I. pipe in ground below road, path etc at a depth not less than 40 cm and upto 90 cm including excavation, dismantling of road if required and refilling the trench with excavated material, ramming and making the surface good etc. as per specification. 14.3.1 50 mm internal dia Metre 333.00 50 16650.00
261 PWD ELECT 2020 14.3.3 100 mm internal dia Metre 879.00 10 8790.00
262 PWD ELECT 2020 15.1 Supplying and laying following sizes one number FRLS PVC insulated/XLPE, PVC sheathed, steel armoured, aluminium conductor power cable of 1.1 KV grade direct in ground at a depth not less than 40 cm and upto 90 cm including excavtion, sand cushioning, protective covering and refilling the trench etc as per specification, IS: 1554 (1988, Part 1) / IS: 7098 (1988, Part 1). 15.1.17 3.5 x 150 sq. mm. Metre 674.00 70 47180.00
263 PWD ELECT 2020 15.3 Supplying and laying following sizes one number FRLS PVC insulated /XLPE, PVC sheathed, steel armoured, aluminium conductor power cable of 1.1 KV grade in existing RCC/ HUME/ STONEWARE/ METAL/ HDPE pipe as per specification, IS: 1554 (1988, Part 1) / IS: 7098 (1988, Part 1). 15.3.12 3.5 x 35 sq. mm. Metre 134.00 160 21440.00
268 PWD ELECT 2020 15.5 Supplying and laying following sizes one number FRLS PVC insulated /XLPE, PVC sheathed, steel armoured, aluminium conductor power cable of 1.1 KV grade on surface/ existing cable tray with 1 mm thick GI saddle as per specification, IS: 1554 (1988, Part 1) / IS: 7098 (1988, Part 1). 15.5.12 3.5 x 35 sq. mm. Metre 158.00 10 1580.00
272 PWD ELECT 2020 15.6 Supplying and laying following sizes one number FRLS PVC insulated /XLPE, PVC sheathed, steel armoured, aluminium conductor power cable of 1.1 KV grade on surface/ existing cable tray with 25x3 mm M.S flat clamp and steel dash fastener/ G.I. bolts and nuts as per specification , IS: 1554 (1988, Part 1) / IS: 7098 (1988, Part 1). 15.6.1 3.5 x 50 sq. mm. Metre 278.00 15 4170.00
273 PWD ELECT 2020 15.7 Supplying and laying following sizes one number FRLS PVC insulated /XLPE, PVC sheathed, steel armoured, aluminium conductor power cable of 1.1 KV grade on surface/ existing cable tray with 40x3 mm MS flat clamp and steel dash fastener/ G.I. bolts and nuts as per specification, IS: 1554 (1988, Part 1) / IS: 7098 (1988, Part 1). 15.7.1 3.5 x 150 sq. mm. Metre 588.00 10 5880.00
274 PWD ELECT 2020 15.23 Supplying and making end termination with brass compression gland and aluminum lugs for following size armoured aluminum conductor power cable of 1.1 KV grade as per specification. . 15.23.15 3½ X 70 sq. mm (35 mm) Each 199.00 32 6368.00
280 PWD ELECT 2020 19.3 Supply of swaged steel tubular pole as per IS 2713 with base plate of size 300x300x6mm welded at bottom, necessary hole for cable entry and earthing stud welded at specified height including painting with one coat of red oxide zinc chromate primer. 19.3.11 Designation 410 SP-32 height 9.00 metre Each 11825.00 20 236500.00
281 PWD ELECT 2020 19.5 Providing and welding M.S. base plate of size 300x300x3mm at bottom of GI/MS pipe pole. Each 166.00 20 3320.00
282 PWD ELECT 2020 19.9 Supply and fixing following street light pole bracket on existing pole made out of 50 mm dia MS "B" class pipe welded to 300 mm long MS pole canopy of suitable dia at a angle of 102.50 including having MS triangular stiffner of size 150 X 50 X 5 mm thick, making arrangement for tightening the bracket with pole by providing suitable size heavy duty nuts and bolts in canopy, painting with one coat of approved steel primer etc. as per specification.19.9.1 Single Over Hang 0.75 metre Long Each 963.00 15 14445.00
283 PWD ELECT 2020 19.9.5 Double Over Hang 0.75 metre Long Each 1355.00 5 6775.00
284 PWD ELECT 2020 19.10 Erection of STEEL TUBULAR or "H" BEAM/ ISMB pole in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation and cement concrete collar of size 0.4 metre dia and 0.50 metre height from ground level including excavation and refilling etc. as per specification of length: 19.10.4 7 metre to 10 metre Each 2610.00 20 52200.00
285 PWD ELECT 2020 19.16 Supplying and fixing water tight terminal box made of 1.6mm thick M.S. sheet with detachable gland plate in bottom, hinged front open able cover, rubber gasket, having 1 Nos 4way connector and 1 No SPMCB inside the box for cable connection, fixed to pole with 2 Nos clamp made from 40x3mm M.S. flat with 2 No nut bolt dully painted with 2 coat of red oxide paint and 2 coat aluminium paint complete as per specification. 19.16.2 30x20x15 cms. Each 815.00 20 16300.00
286 PWD ELECT 2020 19.24 Painting of following height steel tubular poles with two coat of approved colour and shade synthetic enamel paint including cleaning the surface as per specification: 19.24.3 Above 8 metre and upto 10 metre Each 265.00 20 5300.00
287 PWD ELECT 2020 23.3 Supplying, installation, testing and commissioning of submersible pump set for water supply system with submersible motor directly coupled to multi-stage submersible pump of specified discharge capacity, head, delivery size in existing bore well including 2 sets of suitable size holding clamps made out of 50 mm X 6 mm MS flat, connection with suitable submersible cable of standard length etc. as per specification and IS: 694 (2010). Note: submersible Cable should be rust proof, safe from oil / Grease and under water Chemical / abrasion Resistant. 23.3.3 2.0 HP, single phase Each 19805.00 2 39610.00
288 PWD ELECT 2020 23.5 Supplying and fixing of following sizes 'B' class G I pipe with all necessary Tee's, bends, sockets in the suction/ delivery line including cutting and threading etc. as per specification. 23.5.5 40 mm dia. Metre 311.00 130 40430.00
289 PWD ELECT 2020 23.11 Supply, installation, testing and commissioning of 1-3 HP 1 phase submersible motor starter cum control wall/ floor mounted type made out of not less than 1.6 mm thick MS sheet and comprising of following panel mounting switchgears there in including connection inter-connection etc. as per specification. a) Phase indicating lamps with fuses and toggle switches 1 set b) 1/2/3 HP 1 phase DOL starter with over load and no volt relay 1 No c) 25 A "C" curve DPMCB 1 No d) Voltmeter 0-250 V 1 set e) Ammeter 0-10 A 1 set Each 4030.00 2 8060.00
290 PWD ELECT 2020 23.12 Supplying and fixing M.S. clamp 50 cm long made of 50mmx5mm thick M.S. Flat for holding the pipes and submerable pump set as per specification. Metre 291.00 2 582.00
291 PWD ELECT 2020 23.13 Supplying and fixing 300 mm dia 2 mm thick M.S. sheet cover with 3 cm edge in two past on tube well bore pipe as per specification Each 388.00 2 776.00
292 PWD ELECT 2020 23.14 Supplying, laying and fixing following size submersible cable along with GI/PVC/HDFC pipe line or laid in ground etc as per specification and IS: 694 (2010). Note: Cable should be rust proof, safe from oil / Grease and under water Chemical / abrasion Resistant. 23.14.2 3x2.5 sqmm Metre 64.00 160 10240.00
293 PWD ELECT 2020 30.1 Earth work in all type soil except soft rock / hard rock with all lead and 1.5 metre lift, dressing, stacking excavated strata including refilling of excavated soil in trench / pit to ground level complete as per specification. cum 168.00 104.5 17556.00
294 PWD ELECT 2020 32.8 Supplying following sizes FRLS PVC insulated , PVC sheathed, steel armoured, copper conductor controle cable of 1.1 KV grade 32.8.1 2 x 1.5 sq. mm Metre 40.00 250 10000.00
Say Rs. 456.18 lacs
Sub Engineer S.D.O. P.W.D. Sub Division Bemetara Executive Engineer P.W.D. Bemetara Division Bemetara
Department Name Code SOR Name SOR UOM Name UOM Code false6329
Bastar Urban Public Transport Society (BSTUPTS) BSTUPTS ELECTRIC ELECT Percentage %
Bilaspur Urban Public Transport Society (BSPUPTS) BSPUPTS NON SOR NS Per mile %O
Chhattisgarh Department of Agriculture (CGDA) CGDA BRIDGE PWD_BRIDGE 1000 no. 1000 no.
Chhattisgarh Handicraft Board (CGHCB) CGHCB PWD BUILDLING PWD BLD 1000No. 1000No.
Chhattisgarh High Court, Bilaspur (CGHC) CGHC PWD ROAD PWD ROAD Siemens Per meter A/V
Chhattisgarh Housing Board (CGHB) CGHB Acre ACR
Chhattisgarh Infotech Promotion Society (CHiPS) CHiPS Activity unit AU
Chhattisgarh Medical Services Corporation Ltd. (CGMSC) CGMSC Bag BAG
Chhattisgarh Police Housing Corporation Ltd (CGPHC) CGPHC Book BK
Chhattisgarh Rajya Beej Evam Krishi Vikas Nigam (CGRBEKVN) CGRBEKVN Box BOX
Chhattisgarh State Civil Supplies Corp. Limited (SCSC) SCSC Gallons per hour (US) BPH
Chhattisgarh State Industrial Development Corporation (CSIDC) CSIDC Bottle BT
Chhattisgarh State Mandi Board (CGSMB) CGSMB Cubic sentimeter /second C3S
Chhattisgarh State Minor Forest Produce(Trading & Developme) Co-Operative Federation Ltd (CGMFPFED) CGMFPFED Canister CAN
Chhattisgarh State Power Distribution Company Limited (CGSPDCL) CGSPDCL Carton CAR
Chhattisgarh State Power Generation Company Limited (CGSPGCL) CGSPGCL Cubic Centimeter CCM
Chhattisgarh State Power Transmission Company Limited (CGSPTCL) CGSPTCL Cubic decimeter CD3
Chhattisgarh State Warehousing Corporation (CGSWC) CGSWC Centiliter CL
Chhattisgarh Text Book Corporation (CGTBC) CGTBC cm cm
Department of Animal Husbandry and Dairy (DAHD) DAHD Centimeter CM
Department of Home Guard and Civil Defence Chhattisgarh (HGCD) HGCD Square centimeter CM2
Department of Panchayat and Social Welfare (DPSW) DPSW Crate CRT
Department of School Education (DSE) DSE Case CS
Department of Technical Education (DTE) DTE Cu.Mtr. Cu.Mtr.
Directorate of Fisheries (DF) DF cum cum
Durg-Bhilai Urban Public Transport Society (DBUPTS) DBUPTS cum.km cum.km
Food and Drug Administration (FDA) FDA Days DAY
Health Department (HD) HD Degree DEG
Indira Gandhi Krishi Vishwavidyalaya (IGKV) IGKV DFLT DFLT
Korba Urban Public Transport Society (KRBAUPTS) KRBAUPTS Decimeter DM
Koriya Urban Public Transport Society (KRYAUPTS) KRYAUPTS Drum DR
Mineral Resources Department (MRD) MRD Dozen DZ
Naya Raipur Development Authority (NRDA) NRDA EACH EA
Panchayat and Rural Development (PARD) PARD each each
Public Health Engineering Department (PHED) PHED each additional floor each additional floor
Public Works Department (PWD) PWD each cut each cut
Raigarh Urban Public Transport Society (RIGUPTS) RIGUPTS each test each test
Raipur Collectorate (RC) RC each tree guard each tree guard
Raipur Development Authority (RDA) RDA each tree guard each tree guard
Raipur Urban Public Transport Society (RUPTS) RUPTS Enzyme Units / Milliliter EML
Rajnandgaon Urban Public Transport Society (RNDGUPTS) RNDGUPTS Enzyme Units EU
Rural Engineering Services (RES) RES Fluid Ounce US FOZ
Sarguja Urban Public Transport Society (SUPTS) SUPTS Feet FT
State Urban Development Agency (SUDA) SUDA Square foot FT2
Urban Administration and Development Department (UADD) UADD Cubic foot FT3
Water Resources Department (WRD) WRD Gigajoule FY
gram act.ingrd /liter G/L
Gram act.ingrd. GI
Gram /liter GLI
Gram /square meter GM2
Gram/Cubic meter GM3
Gallons per mile (US) GPM
hectare hectare
Joule /kilogram JKG
Kilogram act.ingrd KAI
Kilogram /cubic decimeter KD3
Kilogram/Mol KGM
Kilogram /Second KGS
Kilogram / cubic meter KGV
kg act.ingrd /kg KIK
Kilojoule/kilogram KJK
Kilojoule/Mol KJM
Square kilometer KM2
Kilometer/hour KMH
Kelvin/Minute KMN
Kelvin /Second KMS
Kilonewton per square meter KNM
Kilovoltampere KVA
Liter per 100 km LHK
Liter /Minute LMI
Liter /Molsecond LMS
Liter Per hour LPH
1/square meter M-2
Mol per cubic meter M:M
Megawatt hours M..
Meter /Hour M/H
Mol per liter M/L
Meter /second M/S
Square meter M2
Square meter/Coat M2C
Square meter/second M2S
Cubic meter /Hour M3H
Cubic meter/second M3S
Milligram/liter MGL
Milligram /cubic meter MGQ
Square mile MI2
Microsecond MIS
Milliliter act.ingr. MLI
Square millimeter MM2
Cubic millimeter MM3
Millinewton/meter MNM
Miles per gallon (UG) MPG
Millimol per liter MPL
Millipascal seconds MPS
Meter/second squared MS2
Microsiemens per centimeter MSC
Newton/meter NM
Newton/Square millimeter NMM
one RCC jaali tree guard one RCC jaali tree guard
one RCC jaali tree guard one RCC jaali tree guard
P.cumt. P.cumt.
P.Point P.Point
p.sq.mtr p.sq.mtr
P/sq.Mt. P/sq.Mt.
Pascal second PAS
Megavoltampere PCT
per cm height per letter per cm height per letter
per cm height per letter per cm height per letter
per cubic centimeter per cubic centimeter
Per Km. Per Km.
per letter per letter
Per mtr Per mtr
per pouch per pouch
per test per test
per tonne per tonne
per tonne capacity per tonne capacity
per.mtr per.mtr
Parts per billion PPB
Parts per million PPM
Parts per trillion PPT
Number of persons PRS
Pound Per Sq inch PSI
Pint, US liquid PT
Per Ton Per KM PTPK
Quart, US liquid QT
quintal quintal
Gramm/cubic centimeter RHO
RUNNING METRE RMT
Thousand Hours THR
Ton/Cubic meter TOM
DEFAULT UNIT DESCRIPTION XXX
Square Yard YD2
Microgram /liter µGL
Microgram /cubic meter µGQ
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 1.07 MB
3662590503382863201_153213_1258250143523725404_129113_Guidelines_to_Bidders_EPS_v1.pdf
NIT • 0.13 MB
384700471277103604_186525_Form A.docx
NIT • 0.07 MB
4077185647319302848_186525_NIT.docx
NIT • 0.12 MB
3121421521014200281_186525_Notice.doc
NIT • 0.08 MB
1138733193837116370_186525_ANNEXURE-_E.xlsx
BOQ • 0.01 MB
6072345569562606702_186525_APPROVED_MATERIAL.xlsx
BOQ • 0.01 MB
7788605493222278410_186525_BOQ.xlsx
BOQ • 0.07 MB
Download all tender documents and submit your bid