Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.8 LAccepted-AOC | L1 | Accepted-AOC BEING 1ST LOWEST | |
| 2 | L2₹36.7 L+₹290.91 (<0.01%)Rejected-Finance BLDG NO XI 74 NEAR VALLARAM KULLANGARA TEMPLE KUNHIMANGALAM KOVVAPPURAM PO KANNUR DIST KERALA 670309 | KANNUR | KERALA | 670309 | L2 | Rejected-Finance Being 2nd lowest | |
| 3 | L3₹39.5 L+₹2.8 L (7.67%)Rejected-Finance PLOT NO 1134 1196 MORIVALI VILLAGE TAL AMBARNATH DIST THANE AMBERNATH 421505 | AMBERNATH | THANE | MAHARASHTRA | 421505 | L3 | Rejected-Finance Being 3rd lowest | |
| 4 | L4₹45.4 L+₹8.7 L (23.7%)Rejected-Finance | L4 | Rejected-Finance Being 4th lowest | |
| 5 | L5₹46.3 L+₹9.6 L (26.1%)Rejected-Finance | L5 | Rejected-Finance Being 5th lowest |
Tender Value
₹46.8 L
Closing Date
9 Aug 2021, 6:00 pmClosed
Garrison Engineer I (P) Fy Kirkee
8, ENGINE HOUSE ROAD, ORDNANCE ESTATE, KIRKEE, PUNE-411003
Repairs to existing two wheeler shed in front of North East gate at ordnance Estate Ambarnath.
2021_MES_456870_1
8633
Open Tender
Civil Works
Item Rate
210 days
Ambarnath
AS PER NIT
7 documents required · 7 mandatory
₹500
Garrison Engineer I (P) Fy Kirkee
Exempted
27 Sept 2021
5 Jul 2021
13 Aug 2021
5 Jul 2021
9 Aug 2021
25 Jul 2021
5 Jul 2021 - 10 Jul 2021
Amount
Demolition of RCC roofs, floors (other than ground floor) , beams, stair case , landings, chajjas and similar suspended work complet all as specified and directed by E- I -C
Demolition of cement concrete (reinforced) of any description and in any positioin not otherwise specifically provided for complete all as specified and directed by E- I -C
Demolition of Plain cement concrete in ground floor and paving n. exc 15 cm thickness (below or above ground level) all as specified by E- I -C
Dismantling Asbestos cement (Corrugated , semi -corrugted, etc) sheet in roof covering complete all as specified and directed by E- I -C
Dismantling plain or corrugated steel sheeting , any gauge , thickness, including Nainital or similar pattern roof covering complete all as specified and directed by E- I -C
S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall , fixed with self tapping screws as specified and directed by E- I -C
S & F plain 0.56 mm thick Aluminium sheeting , alloy 31000 H4 in ridges, hips , vally gutter , drip and straight flashing (Lengh and girth as fixed) complete all as secified and directed by Engineer-in-Charge
M & L for excavating in hard/dense soil in post holes (or similar holes) each n exc 0.5 cum getting out, returing, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed by E- I -C
M & L for plain cement concrete 1:4:8 Type D2 (Using 40 mm graded stone aggregate) in foundation , filling and mass concrete complete all as specified and directed by Engineer-in-Chaarge
M & L for plain cement concrete 1:3:6 Type C2 (Using 40 mm graded stone aggregate) in foundation , filling and mass concrete complete all as specified and directed by Engineer-in-Charge
M & L for Machine pressed rubber moulded precast concrete interlocking paver block with grey cement no pigment of any shape and size confirming to IS 15658-2006 of 60 mm thickness , M-35 grade on and including 50 mm thick layer of stone dust complete all as specified and directed by Engineer-in-Charge
M & L for 100 mm thick plain cement concrete 1:4:8 Type D2 (Using 40 mm stone aggregate) as a subbase under floor complete all as specified and directed by Enginner -in-Charge
Excavation in trenches in hard/dense soil n.exc 1.5m wide and n.exc 1.5m in depth for foundation, or for man holes etc., n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out complete all as specified and directed by E- I -C
Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm in hard/dense soil all as specified and directed by E- I -C
Removing excavated soil to a distance n.exceeding 50mtr and depositing where directed at a level n.exc 1.5mtr above the starting pointing all as specified and directed by by E- I -C
Demolition of brickwork or stone/boulder masonary, built in cement mortar or cement lime mortar including all quoins, arches,pillars, etc, but excluding ashler facings dressed stonework and precast concrete articles complete all as specified and directed by E- I -C
M & L for Brickwork with subclass 'B' brick bricks, straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed by E- I -C
Taking down cement plaster on brick work or stone walls, etc including raking out joints, hacking for key, scrubbing down with water, etc.all as specified and by E- I -C
M&L for rendering 15 mm in CM 1:6 thick on fair faces of brick work or concrete surface finished even and fair cement complete all as specified and directed by E- I -C
M & L for Preparation of new wall surfaces and applying three coat of white wash complete all as specified and directed by E- I -C
M & L for Preparation of old decorated concrete wall surfaces applying two coat of white wash complete all as specified and directed by E- I -C
M&L for providing plain cement concrete 1:2:4 type B0 (using 12.5 mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, parapets and lacing coursse, parapets and railings, upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbst, water troughs and the like including necessry form work weathering, slightly rounded or chamfered angles and throating all as specified and directed by E- I -C
M&L 75 mm thick plain cement concrete 1:2:4 type B-1 (using 40 mm graded stone aggregate) as in hard standing, finishing cement concrete surface even an smooth wothout using extra cement completes all as specified and directed by E- I -C
S & F mild steel work in tubular trusses including special shaped washer etc , complete using ERW or induction butt welded tubes confirming to IS 1161-1998 grade St-240 complete all as specified and directed by E- I -C
M & L for MS Round bars 10 mm dia and over cut to length bent to shape required and all as specified conforming to gde FE 410W for securing chain link fencing complete all as specified by E- I -C
Dismantling framed trusses n exc 10 m n spanall as specified and directed by E- I -C
Dismantling structural steel work etc complete all as specified and directed by E- I -C
Dismantling expanded metal any thickness or mesh fixed with steel or wood fillets complete all as specified and directed n exc 4 kg/sqm all as specified and directed by E- I -C
Dismantaling posts or struts embeded in concrete , brick work masonary etc (wood , steel or RCC) any section, including taking out embedded portion and making good distrurbed ground all as specified and directed by E- I -C
S&F for mild steel works as in posts and strruts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc and flat iron fillets for securing wire mesh similar work Confirming to Fe-290 Gde E-165 etc all as specified and directed by by E- I -C
Supply only Chain link MS galvanized fencing any size or type all as specified and directed by E- I -C
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and directed by E- I -C
S&F for mild steel screw bolts (machine made) diameter of neck 11 to 15 mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5 cm and n exc 10 cm long, complete all as specified and directed by by E- I -C
M & L for new or previously untreated steel surfaces of any description n exc 10 cm wirdth or girth , applying two coat of synthetic enamel (Ordinary tint ) paint over coat of one coat Red oxide, zinc chrome primer not otherwise discribed all as specified and directed by E- I -C
M& L for preparation of new or previously untreated steel surfaces of any description over 10 cm width or girth, applying two coat of synthetic enamel (Oridinary tint) paint over a coat of Red oxide, zinc chrome primer complete all as specified and directed by E- I -C
M & L for preparation of old treated steel surfaces of any description exc 10 cm wirdth or girth and applying two coat of synthetic enamel (Ordinary tint ) paint all as specified and directed by E- I -C
shakti engineering and electrical works
Om Construction
GRACE CONSTRUCTIONS
Hindustan Construction Company
RS Enterprises
Bidder Name
RS Enterprises
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .